diff --git a/SlipCompiler.py b/SlipCompiler.py
new file mode 100644
index 0000000..3f346fb
--- /dev/null
+++ b/SlipCompiler.py
@@ -0,0 +1,98 @@
+instruction_opcodes = {
+    "IDK": 0x00,
+    "LIT": 0x01,
+    "SWAP": 0x02,
+    "DEL": 0x03,
+    "COPY": 0x04,
+    "DEF": 0x05,
+    "END": 0x06,
+    "ADD": 0x10,
+    "SUB": 0x11,
+    "MUL": 0x12,
+    "DIV": 0x13,
+    "POW": 0x14,
+    "SQRT": 0x15,
+    "ONEMIN": 0x16,
+    "ROUND": 0x17,
+    "CEIL": 0x18,
+    "FLOOR": 0x19,
+    "MOD": 0x1a,
+    "FRACT": 0x1b,
+    "COMP": 0x1c,
+    "LERP": 0x1d,
+    "MIN": 0x1e,
+    "MAX": 0x1f
+}
+
+type_opcodes = {
+    "BOOL": {"code": 0x00, "length": 1},
+    "INT": {"code": 0x01, "length": 4},
+    "FLT": {"code": 0x02, "length": 4},
+    "VEC": {"code": 0x03, "length": 12}
+}
+
+source_file = open("Test.slc")
+source_code = source_file.read()
+source_code = source_code.replace(" ", "\n")
+source_code = source_code.split("\n")
+
+import struct
+
+byte_code = bytearray()
+code_type = ""
+lit_type = ""
+for word in source_code:
+    print(f"\nIn: \"{word}\"")
+    # Handle literal types
+    if code_type == "lit_type":
+        print("Consuming literal type...")
+        print("Expecting next input to be a literal value.")
+
+        # Consume a literal of this word's type next
+        code_type = "literal"
+        lit_type = word
+
+        # Push the type opcode onto the instruction stack
+        opcode = type_opcodes[word]["code"]
+        byte_code.append(opcode)
+        print(f"Out: {hex(opcode)}")
+        continue
+    # Handle literal values
+    if code_type == "literal":
+        print("Consuming literal value...")
+
+        # Consume a generic command next
+        code_type = ""
+
+        # Handle float literals
+        if lit_type == "FLT":
+            lit_bytes = bytearray(struct.pack(">f", float(word)))
+            byte_code.extend(lit_bytes)
+            print(f"Out: 0x{bytes(lit_bytes).hex()}")
+        # Handle vector literals
+        if lit_type == "VEC":
+            # Creates an array of floats from a string like "-1.0,7.3,10.5"
+            vector_components = word.split(",")
+            lit_bytes = bytearray()
+            for component in vector_components:
+                component_bytes = bytearray(struct.pack(">f", float(component)))
+                lit_bytes.extend(component_bytes)
+            byte_code.extend(lit_bytes)
+            print(f"Out: 0x{bytes(lit_bytes).hex()}")
+        continue
+    # Handle generic commands
+    else:
+        print("Consuming generic command...")
+        if word == "LIT":
+            print("Expecting next input to be a literal type.")
+            code_type = "lit_type"
+        opcode = instruction_opcodes[word]
+        byte_code.append(opcode)
+        print(f"Out: {hex(opcode)}")
+        continue
+
+pure_bytes = bytes(byte_code)
+with open("Test.slb", "wb") as binary_file:
+    binary_file.write(pure_bytes)
+
+print("\nWrote binary file to disk!")
\ No newline at end of file
diff --git a/SlipcodeCompilationTest.ipynb b/SlipcodeCompilationTest.ipynb
index 25abc12..c173c5e 100644
--- a/SlipcodeCompilationTest.ipynb
+++ b/SlipcodeCompilationTest.ipynb
@@ -2,11 +2,11 @@
  "cells": [
   {
    "cell_type": "code",
-   "execution_count": 71,
+   "execution_count": 4,
    "metadata": {},
    "outputs": [],
    "source": [
-    "opcodes = {\n",
+    "instruction_opcodes = {\n",
     "    \"IDK\": 0x00,\n",
     "    \"LIT\": 0x01,\n",
     "    \"SWAP\": 0x02,\n",
@@ -30,12 +30,19 @@
     "    \"LERP\": 0x1d,\n",
     "    \"MIN\": 0x1e,\n",
     "    \"MAX\": 0x1f\n",
+    "}\n",
+    "\n",
+    "type_opcodes = {\n",
+    "    \"BOOL\": {\"code\": 0x00, \"length\": 1},\n",
+    "    \"INT\": {\"code\": 0x01, \"length\": 4},\n",
+    "    \"FLT\": {\"code\": 0x02, \"length\": 4},\n",
+    "    \"VEC\": {\"code\": 0x03, \"length\": 12}\n",
     "}"
    ]
   },
   {
    "cell_type": "code",
-   "execution_count": 72,
+   "execution_count": 5,
    "metadata": {},
    "outputs": [],
    "source": [
@@ -47,27 +54,32 @@
   },
   {
    "cell_type": "code",
-   "execution_count": 74,
+   "execution_count": 6,
    "metadata": {},
    "outputs": [
     {
      "name": "stdout",
      "output_type": "stream",
      "text": [
-      "1\n",
-      "1\n",
-      "2\n",
-      "16\n",
-      "4\n",
-      "16\n",
-      "4\n",
-      "25\n",
-      "17\n",
-      "1\n",
-      "17\n",
-      "25\n",
-      "1\n",
-      "18\n"
+      "LIT, \n",
+      "Parsing generic command...\n",
+      "FLT, lit_type\n",
+      "Parsing literal type...\n",
+      "-1.0, literal\n",
+      "Parsing literal value...\n",
+      "LIT, literal\n",
+      "Parsing literal value...\n"
+     ]
+    },
+    {
+     "ename": "ValueError",
+     "evalue": "could not convert string to float: 'LIT'",
+     "output_type": "error",
+     "traceback": [
+      "\u001b[1;31m---------------------------------------------------------------------------\u001b[0m",
+      "\u001b[1;31mValueError\u001b[0m                                Traceback (most recent call last)",
+      "\u001b[1;32m~\\AppData\\Local\\Temp/ipykernel_20464/1959865281.py\u001b[0m in \u001b[0;36m<module>\u001b[1;34m\u001b[0m\n\u001b[0;32m     23\u001b[0m         \u001b[1;31m# Handle float literals\u001b[0m\u001b[1;33m\u001b[0m\u001b[1;33m\u001b[0m\u001b[1;33m\u001b[0m\u001b[0m\n\u001b[0;32m     24\u001b[0m         \u001b[1;32mif\u001b[0m \u001b[0mlit_type\u001b[0m \u001b[1;33m==\u001b[0m \u001b[1;34m\"FLT\"\u001b[0m\u001b[1;33m:\u001b[0m\u001b[1;33m\u001b[0m\u001b[1;33m\u001b[0m\u001b[0m\n\u001b[1;32m---> 25\u001b[1;33m             \u001b[0mlit_bytes\u001b[0m \u001b[1;33m=\u001b[0m \u001b[0mbytearray\u001b[0m\u001b[1;33m(\u001b[0m\u001b[0mstruct\u001b[0m\u001b[1;33m.\u001b[0m\u001b[0mpack\u001b[0m\u001b[1;33m(\u001b[0m\u001b[1;34m\">f\"\u001b[0m\u001b[1;33m,\u001b[0m \u001b[0mfloat\u001b[0m\u001b[1;33m(\u001b[0m\u001b[0mword\u001b[0m\u001b[1;33m)\u001b[0m\u001b[1;33m)\u001b[0m\u001b[1;33m)\u001b[0m\u001b[1;33m\u001b[0m\u001b[1;33m\u001b[0m\u001b[0m\n\u001b[0m\u001b[0;32m     26\u001b[0m             \u001b[0mbyte_code\u001b[0m\u001b[1;33m.\u001b[0m\u001b[0mextend\u001b[0m\u001b[1;33m(\u001b[0m\u001b[0mlit_bytes\u001b[0m\u001b[1;33m)\u001b[0m\u001b[1;33m\u001b[0m\u001b[1;33m\u001b[0m\u001b[0m\n\u001b[0;32m     27\u001b[0m         \u001b[1;31m# Handle vector literals\u001b[0m\u001b[1;33m\u001b[0m\u001b[1;33m\u001b[0m\u001b[1;33m\u001b[0m\u001b[0m\n",
+      "\u001b[1;31mValueError\u001b[0m: could not convert string to float: 'LIT'"
      ]
     }
    ],
@@ -75,18 +87,47 @@
     "import struct\n",
     "\n",
     "byte_code = bytearray()\n",
-    "is_literal = False\n",
-    "for line in source_code:\n",
-    "    if is_literal:\n",
-    "        lit_bytes = bytearray(struct.pack(\">f\", float(line)))\n",
-    "        byte_code.extend(lit_bytes)\n",
-    "        is_literal = False\n",
+    "code_type = \"\"\n",
+    "lit_type = \"\"\n",
+    "for word in source_code:\n",
+    "    print(f\"{word}, {code_type}\")\n",
+    "    # Handle literal types\n",
+    "    if code_type == \"lit_type\":\n",
+    "        print(\"Parsing literal type...\")\n",
+    "\n",
+    "        # Consume a literal of this word's type next\n",
+    "        code_type = \"literal\"\n",
+    "        lit_type = word\n",
+    "\n",
+    "        # Push the type opcode onto the instruction stack\n",
+    "        byte_code.append(type_opcodes[word][\"code\"])\n",
+    "        continue\n",
+    "    # Handle literal values\n",
+    "    if code_type == \"literal\":\n",
+    "        print(\"Parsing literal value...\")\n",
+    "\n",
+    "        # Consume a generic command next\n",
+    "        code_type = \"\"\n",
+    "\n",
+    "        # Handle float literals\n",
+    "        if lit_type == \"FLT\":\n",
+    "            lit_bytes = bytearray(struct.pack(\">f\", float(word)))\n",
+    "            byte_code.extend(lit_bytes)\n",
+    "        # Handle vector literals\n",
+    "        if lit_type == \"VEC\":\n",
+    "            # Creates an array of floats from a string like \"-1.0,7.3,10.5\"\n",
+    "            vector_components = word.split(\",\")\n",
+    "            for component in vector_components:\n",
+    "                lit_bytes = bytearray(struct.pack(\">f\", float(component)))\n",
+    "                byte_code.extend(lit_bytes)\n",
+    "        continue\n",
+    "    # Handle generic commands\n",
     "    else:\n",
-    "        if line == \"LIT\":\n",
-    "            is_literal = True\n",
-    "        instruction = opcodes[line]\n",
-    "        print(instruction)\n",
-    "        byte_code.append(instruction)\n",
+    "        print(\"Parsing generic command...\")\n",
+    "        if word == \"LIT\":\n",
+    "            code_type = \"lit_type\"\n",
+    "        byte_code.append(instruction_opcodes[word])\n",
+    "        continue\n",
     "\n",
     "pure_bytes = bytes(byte_code)\n",
     "with open(\"Test.slb\", \"wb\") as binary_file:\n",
@@ -113,7 +154,7 @@
    "name": "python",
    "nbconvert_exporter": "python",
    "pygments_lexer": "ipython3",
-   "version": "3.8.8"
+   "version": "3.7.8"
   },
   "orig_nbformat": 4
  },
diff --git a/Test.slb b/Test.slb
index 37d9a5a..0ab680b 100644
Binary files a/Test.slb and b/Test.slb differ
diff --git a/Test.slc b/Test.slc
index fc626a7..7466c3e 100644
--- a/Test.slc
+++ b/Test.slc
@@ -1,5 +1,5 @@
-LIT -1.0
-LIT 57.33
+LIT FLT -1.0
+LIT FLT 57.33
 SWAP
 ADD
 COPY
@@ -7,8 +7,9 @@ ADD
 COPY
 FLOOR
 SUB
-LIT 100.0
+LIT FLT 100.0
 SUB
 FLOOR
-LIT -0.97
-MUL
\ No newline at end of file
+LIT FLT -0.97
+MUL
+LIT VEC 1.0,1.0,1.0
\ No newline at end of file