From d6f90886550d13b5d020d68e92d1b790ba937523 Mon Sep 17 00:00:00 2001
From: Deven Blake ~ Return to the rest of the site General resources See also
Some models have the camera, some don't.
-Camera kits are available on-line for the X200T for around US$15 or so.
+Camera kits are available on-line for the X200 Tablet for around US$15 or so.
As far as I know, any 2.5" SATA laptop-sized drive will work.Thinkpad X200 Tablet
updated 2021-10-14
-
+
+
Camera
SATA drive
-Most of the eBay listings for X200Ts don't have hard drive covers or caddies. +Most of the eBay listings for X200 Tablets don't have hard drive covers or caddies. You will want a caddy because it makes it much easier to get a drive out, and because it spaces out the drive in the space provided and provides some (minimal) amount of shock protection. This is especially good for hard disks as you don't want those moving around in your laptop chassis, even if there's no risk of them being disconnected.
In a pinch you can use cardboard to space out a drive. -I made out okay using folded cardstock given that my X200T was going nowhere except my desk. +I made out okay using folded cardstock given that my X200 Tablet was going nowhere except my desk. You should not do this for long periods, not really because there's some risk that increases as time wears on but just because in general it's stupid.
-The same rubber rails that go around the hard drive, and the same metal thing that you screw onto the drive that has the black ribbon attached used to pull the drive out, are used for the X200, X200S, X201T, X201, X201S, X201T, T420, T420S, T430, and T430S, as far as I know. -Rubber rails for the X220T did not work, nor did the bay cover for the X220T work for the X200T. +The same rubber rails that go around the hard drive, and the same metal thing that you screw onto the drive that has the black ribbon attached used to pull the drive out, are used for the X200, X200S, X200 Tablet, X201, X201S, X201 Tablet, T420, T420S, T430, and T430S, as far as I know. +Rubber rails for the X220 Tablet did not work, nor did the bay cover for the X220 Tablet work for the X200 Tablet.
RealBlackStuff says
-the X200T is compatible with DDR3-1066 (PC3-8500)
and DDR3-1333 (PC3-10600)
.
+the X200 Tablet is compatible with DDR3-1066 (PC3-8500)
and DDR3-1333 (PC3-10600)
.
-My ThinkPad X200T (type 7449-43U) came with 2x2GB DDR3-1066 SO-DIMM (PC3-8500)
from Elpida as the OEM provided.
+My ThinkPad X200 Tablet (type 7449-43U) came with 2x2GB DDR3-1066 SO-DIMM (PC3-8500)
from Elpida as the OEM provided.
It's a Core2 Duo SL9600 model and Intel's datasheet doesn't show any maximum memory for the processor.
+My Thinkpad X200 Tablet (type 7450-EYU) came with the same type of memory, from Samsung.
+I haven't checked what processor it has.
-Rumor is the X200T can take 2x4GB DDR3-1066 (PC3-8500)
or possibly DDR3-1333 (PC3-10600)
.
+Rumor is the X200 Tablet can take 2x4GB DDR3-1066 (PC3-8500)
or possibly DDR3-1333 (PC3-10600)
.
I ordered a Corsair 2x4GB DDR3-1066 (PC3-8500)
set.
I probably got bad modules as they're a bit finnicky, but I've managed to get 6GB reported in the BIOS so far by mixing them with OEM memory.
-Apparently for technical reasons the X200T must take 2Rx8 memory; two ranks of eight chips, and for 8GB memory, 256MB per chip (divide 8192MB by 2 modules * 2 ranks * 8 chips). +Apparently for technical reasons the X200 Tablet must take 2Rx8 memory; two ranks of eight chips, and for 8GB memory, 256MB per chip (divide 8192MB by 2 modules * 2 ranks * 8 chips).
-I got in touch with eBay seller woosterpsu who was auctioning off an X200T to benefit the Electronic Frontier Foundation with 8GB RAM installed and reported in the BIOS. +I got in touch with eBay seller woosterpsu who was auctioning off an X200 Tablet to benefit the Electronic Frontier Foundation with 8GB RAM installed and reported in the BIOS. The seller sent me an image of the installed memory: a Hynix 4GB 2Rx8 PC3-10600S and a Dell P/N SNPX830DC/4G, both scavenged from other laptops. These are confirmed working in a Core2 Duo L9400 X200T.
-The X200T originally came with a single-button stylus with a gray "eraser".
+The X200 Tablet originally came with a single-button stylus with a gray "eraser".
I found some single-button stylus from eBay, with a red "eraser", and that worked too.
-I have a two-button stylus that came with another X200T but it's as of yet untested.
-Do not try to insert two-button Thinkpad styluses into the stylus holder of the X200T as they'll become stuck in there because of how the buttons are shaped.
-I have an X200T with a two-button stylus wedged in by the former owner but don't yet know how to get it out.
+I have a two-button stylus that came with another X200 Tablet but it's as of yet untested.
+The Fujitsu T-5000 digitizer pen does work, identically according to xev(1)
.
+
+Do not try to insert two-button Thinkpad styluses into the stylus holder of the X200 Tablet as they'll become stuck in there because of how the buttons are shaped. +To remove a stuck stylus, reference the hardware maintenance manual. +Remove FRUs "1020 Battery pack" and "1060 Keyboard" and follow steps 6 and 7 of the removal process of FRU "1180 DC-in connector, fan, digitizer pen case, and pen switch assembly". +No other FRUs need to be removed, nor do any other steps of the removal process of FRU 1180 need to be followed.