pg(1): start work on a quoted strtok(3) and internal environment

CONDUCT

@@ -1,83 +0,0 @@
-Code of Conduct
-
-This Code of Conduct is derived from the 10 Pāramitās of Theravadin Buddhism.
-You can read more about them in Ṭhānissaro Bhikkhu’s Ten Perfections: A Study
-Guide [0].
-
-1. Generosity (Dāna)
-
-Give contributions freely and willingly under the terms of the GNU Affero
-General Public License, version 3 or later, or a compatible license.
-
-2. Ethics (Sīla)
-
-Do not use nonfree code or uncredited code in contributions. Do not contribute
-code of dubious origins, such as code generated by large language models or
-unlicensed snippets found online [1]. Do not take credit for others’
-contributions. Make sure to utilize the copyright header and license notice on
-source files to credit yourself and others for their work.
-
-3. Renunciation (Nekkhamma)
-
-Stay committed to the principles of simplicity and interoperability embodied by
-the project. Keep your personal will and desire out of the project, for it can
-only prove harmful to its success.
-
-4. Wisdom (Pañña)
-
-Look to established sources for standards, best practices, and important
-implementation details when setting new precedence. Follow the existing
-precedence where it applies.
-
-5. Energy (Viriya)
-
-Focus on the currently-open, currently-assigned, and currently-in-progress
-issues, pull requests, and other endeavors in order to keep yourself and others
-from being overwhelmed with responsibility, either from your zeal or your
-negligence.
-
-If you notice an issue, open an issue as soon as you can. If you see a neglected
-branch, open a pull request or comment on an existing one, if applicable. Be
-diligent in your commitment to making this project work.
-
-6. Patience (Khanti)
-
-Be patient with maintainers and other contributors. We all have our own lives
-going on and may need significant time to get to things.
-
-7. Truthfulness (Sacca)
-
-Communicate honestly and openly. Do not embellish facts to get your way. Make
-sure to let maintainers know about any issues along the way and keep ample
-communication channels open.
-
-8. Determination (Adhiṭṭhāna)
-
-Stay focused on long-term objectives and cultivate attainment to that
-achievement by utilizing to the fullest extent possible the tools available to
-you for managing the workload.
-
-9. Loving-Kindness (Mettā)
-
-Treat everyone with respect, even if they treat you poorly. This does not mean
-you have to put up with abuse, but make sure to respond with kindness and with
-love in your heart. Support and uplift maintainers and other contributors with
-your words and actions.
-
-Do not use angry or hateful language toward contributors, such as demeaning
-phrases and slurs. Make sure that if you do not know the pronouns of a
-contributor to ask for them and, in the meantime, use gender-neutral they/them
-or equivalent pronouns.
-
-10. Equanimity (Upekkhā)
-
-Keep a balanced perspective on all suggestions and contributions and make
-judgements not from a place of ego and personal preference but on their
-usefulness and suitability to the project. Make sure to keep an eye on the
-bigger picture as implementing individual features may seem intuitive at first
-but scale poorly in practical use. Keep a level head about your own work: it is
-not shameful to make a mistake in this vein, and fixing it usually leads to
-more insight.
-
-[0] <https://www.dhammatalks.org/books/#/books/TenPerfections/Section0001.html>
-[1] <https://www.fsf.org/news/publication-of-the-fsf-funded-white-papers-on-questions-around-copilot>

CONTRIBUTING

@@ -1,29 +1,24 @@
-Make sure to read our code of conduct in the CONDUCT file.
-
-
-Copyright Information
-=====================
-
-When editing a file, create a copyright statement correlated to your
-identity so that it is easier to keep track of who has touched what file.
-Pseudonymous contributions are welcome (and encouraged). Place new copyright
-information below existing copyright information. If there is an existing
-copyright statement:
+When contributing a pull request to the main branch, please sign your commits
+with a PGP key and add your name and the year to the bottom of the list of
+copyright holders for the file. For example, an existing copyright header might
+read:
 
  * Copyright (c) 2022–2023 Emma Tebibyte <emma@tebibyte.media>
 
-you would add your name below it like this:
+You would add your name below it like this:
 
  * Copyright (c) 2022–2023 Emma Tebibyte <emma@tebibyte.media>
  * Copyright (c) 20XX Your Name <your e-mail address or website>
 
+We accept contributions from people using aliases.
+
 Only list years in which you modified the source file. For example:
 
  * Copyright (c) 2020–2021, 2023 Your Name <your-address@example.com>
 
 This header shows that “Your Name” worked on this source file in 2020, 2021, and
-2023. Please use the en dash (“–”, U+2013) to separate consecutive years in the
-copyright notice.
+2023. Please use the en dash (“–”) to separate the years in the copyright
+notice.
 
 If you are contributing a new file, please prepend the following license header
 text to it, replacing the proper text on the copyright line:
@@ -95,10 +90,6 @@ notice:
  *     USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
 
-
-Style
-=====
-
 Make sure lines never exceed 80 columns in width when using four-character
 indentation steps. This helps contributors with smaller screens, those using
 side-by-side editor windows or panes, and those who have no text wrapping in
@@ -106,18 +97,12 @@ their editor or terminal.
 
 For usage text and help messages, do not implement a -h option. Instead, print
 usage information when any erroneous option is specified. Follow the NetBSD
-style guide for the usage text’s output format [0].
+style guide for the usage text’s output format [1].
 
-If committing a new utility, please include tests and documentation (see
-tests/ and docs/) for the new tool.
+[1] <http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/src/share/misc/style>
 
-Committing
-==========
-
-When contributing to Bonsai, please sign your commit with a PGP key and create
-the commit with an identity which can be easily contacted.
-
-Format commit messages following these guidelines:
+If committing a new source file, format the commit message following these
+guidelines:
 
 $ git commit -m 'tool(1): add feature x'
 
@@ -143,13 +128,6 @@ $ git commit -m 'tool(1): fix #42 & add feature x'
 
 Commit messages should be written in the present tense.
 
-
-References
-==========
-
-[0] <http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/src/share/misc/style>
-
-
 --
 This work © 2023–2024 by Emma Tebibyte is licensed under CC BY-SA 4.0. To view a
 copy of this license, visit <http://creativecommons.org/licenses/by-sa/4.0/>

Makefile

@@ -8,100 +8,70 @@
 # permitted in any medium without royalty provided the copyright notice and this
 # notice are preserved.  This file is offered as-is, without any warranty.
 
-# The octal escape \043 is utilized twice in this file as make(1p) will
-# interpret a hash in a rule as an inline comment.
-
 .POSIX:
 
+# if using BSD make(1), remove these pragmas because they break it
+.PRAGMA: posix_202x # future POSIX standard support à la pdpmake(1)
+.PRAGMA: command_comment # breaks without this?
+
 DESTDIR ?= dist
 PREFIX ?= /usr/local
 
-# for conditionally compiling OS features
-OS != uname
-OS_INCLUDE != test -e include/$(OS).mk && printf 'include/$(OS).mk\n' \
-	|| printf '/dev/null\n'
-
-# normalized prefix
-PREFIX_N != realpath $(PREFIX)
-MANDIR != test $(PREFIX_N) = / && printf '/usr/share/man\n' \
-	|| printf '$(PREFIX_N)/man\n'
-SYSEXITS != printf '\043include <sysexits.h>\n' | cpp -M - | tr ' ' '\n' \
+SYSEXITS != printf '\043include <sysexits.h>\n' | cpp -M - | sed 's/ /\n/g' \
 	| sed -n 's/sysexits\.h//p' || printf 'include\n'
 
 CC ?= cc
 RUSTC ?= rustc
-RUSTFLAGS += --extern getopt=build/o/libgetopt.rlib \
-	--extern strerror=build/o/libstrerror.rlib \
-	--extern sysexits=build/o/libsysexits.rlib
+RUSTLIBS = --extern getopt=build/o/libgetopt.rlib \
+	--extern sysexits=build/o/libsysexits.rlib \
+	--extern strerror=build/o/libstrerror.rlib
 CFLAGS += -I$(SYSEXITS)
 
-# testing requires the absolute path to the bin directory set
-BIN = build/bin
-
-.PHONY: default
-default: all test
-
 .PHONY: all
-all: dj false fop hru intcmp mm npc peek rpn scrut str strcmp swab true
+all: dj false fop hru intcmp mm npc rpn scrut str strcmp swab true
 
-# keep build/include until bindgen(1) has stdin support
-# https://github.com/rust-lang/rust-bindgen/issues/2703
 build:
-	mkdir -p build/bin build/docs build/include build/lib build/o build/test
+	# keep build/include until bindgen(1) has stdin support
+	# https://github.com/rust-lang/rust-bindgen/issues/2703
+	mkdir -p build/bin build/include build/lib build/o build/test
 
 .PHONY: clean
 clean:
 	rm -rf build dist
 
-dist: all docs
-	mkdir -p $(DESTDIR)/$(PREFIX_N)/bin $(DESTDIR)/$(MANDIR)/man1
-	cp build/bin/* $(DESTDIR)/$(PREFIX_N)/bin
-	cp build/docs/*.1 $(DESTDIR)/$(MANDIR)/man1
+dist: all
+	mkdir -p $(DESTDIR)/$(PREFIX)/bin $(DESTDIR)/$(PREFIX)/share/man/man1
+	cp build/bin/* $(DESTDIR)/$(PREFIX)/bin
+	cp docs/*.1 $(DESTDIR)/$(PREFIX)/share/man/man1
 
 .PHONY: install
 install: dist
 	cp -r $(DESTDIR)/* /
 
-include tests/tests.mk
-
 .PHONY: test
-test: all $(TESTS) /tmp/getopt
-	@echo $(TESTS)
-	/tmp/getopt
-
-/tmp/getopt: src/libgetopt.rs
-	$(RUSTC) --test -o /tmp/getopt src/libgetopt.rs
-
-.PHONY: docs
-docs: docs/ build
-	for file in docs/*; do original="$$(sed -n '/^\.TH/p' <"$$file")"; \
-		title="$$(printf '%s\n' "$$original" | sed \
-		"s/X\.X\.X/$$(git describe --tags --long | cut -d'-' -f1)/g")"; \
-		sed "s/$$original/$$title/g" <"$$file" >"build/$$file"; done
-
-# include OS feature libraries for compilation
-include $(OS_INCLUDE)
+test: build
+	tests/posix-compat.sh
+	$(RUSTC) --test src/getopt-rs/lib.rs -o build/test/getopt
 
 .PHONY: rustlibs
-rustlibs: build/o/libgetopt.rlib build/o/libstrerror.rlib \
-	 build/o/libsysexits.rlib $(OSLIB)
+rustlibs: build/o/libsysexits.rlib build/o/libgetopt.rlib \
+	build/o/libstrerror.rlib
 
-build/o/libgetopt.rlib: build src/libgetopt.rs
+build/o/libgetopt.rlib: build src/getopt-rs/lib.rs
 	$(RUSTC) $(RUSTFLAGS) --crate-type=lib --crate-name=getopt \
-		-o $@ src/libgetopt.rs
+		-o $@ src/getopt-rs/lib.rs
 
-build/o/libstrerror.rlib: build src/libstrerror.rs
+build/o/libstrerror.rlib: build src/strerror.rs
 	$(RUSTC) $(RUSTFLAGS) --crate-type=lib -o $@ \
-		src/libstrerror.rs
+		src/strerror.rs
 
-build/o/libsysexits.rlib: build/include/sysexits.h
+build/o/libsysexits.rlib: build $(SYSEXITS)sysexits.h
+	# bandage solution until bindgen(1) gets stdin support
+	printf '#define EXIT_FAILURE 1\n' | cat - $(SYSEXITS)sysexits.h \
+		> build/include/sysexits.h 
 	bindgen --default-macro-constant-type signed --use-core --formatter=none \
 		build/include/sysexits.h | $(RUSTC) $(RUSTFLAGS) --crate-type lib -o $@ -
 
-# bandage solution until bindgen(1) gets stdin support
-build/include/sysexits.h: build $(SYSEXITS)sysexits.h
-	printf '\043define EXIT_FAILURE 1\n' | cat - $(SYSEXITS)sysexits.h > $@
-
 .PHONY: dj
 dj: build/bin/dj
 build/bin/dj: src/dj.c build
@@ -115,37 +85,37 @@ build/bin/false: src/false.c build
 .PHONY: fop
 fop: build/bin/fop
 build/bin/fop: src/fop.rs build rustlibs
-	$(RUSTC) $(RUSTFLAGS) -o $@ src/fop.rs
+	$(RUSTC) $(RUSTFLAGS) $(RUSTLIBS) -o $@ src/fop.rs
 
 .PHONY: hru
 hru: build/bin/hru
 build/bin/hru: src/hru.rs build rustlibs 
-	$(RUSTC) $(RUSTFLAGS) -o $@ src/hru.rs
+	$(RUSTC) $(RUSTFLAGS) $(RUSTLIBS) -o $@ src/hru.rs
 
 .PHONY: intcmp
 intcmp: build/bin/intcmp
-build/bin/intcmp: src/intcmp.rs build rustlibs
-	$(RUSTC) $(RUSTFLAGS) -o $@ src/intcmp.rs
+build/bin/intcmp: src/intcmp.c build
+	$(CC) $(CFLAGS) -o $@ src/intcmp.c
 
 .PHONY: mm
 mm: build/bin/mm
-build/bin/mm: src/mm.rs build rustlibs 
-	$(RUSTC) $(RUSTFLAGS) -o $@ src/mm.rs
+build/bin/mm: src/mm.c build
+	$(CC) $(CFLAGS) -o $@ src/mm.c
 
 .PHONY: npc
 npc: build/bin/npc
 build/bin/npc: src/npc.c build
 	$(CC) $(CFLAGS) -o $@ src/npc.c
 
-.PHONY: peek
-peek: build/bin/peek
-build/bin/peek: src/peek.c build
-	$(CC) $(CFLAGS) -o $@ src/peek.c
+.PHONY: pg
+pg: build/bin/pg
+build/bin/pg: src/pg.c build
+	$(CC) $(CFLAGS) -o $@ src/pg.c
 
 .PHONY: rpn
 rpn: build/bin/rpn
 build/bin/rpn: src/rpn.rs build rustlibs
-	$(RUSTC) $(RUSTFLAGS) -o $@ src/rpn.rs
+	$(RUSTC) $(RUSTFLAGS) $(RUSTLIBS) -o $@ src/rpn.rs
 
 .PHONY: scrut
 scrut: build/bin/scrut
@@ -164,8 +134,10 @@ build/bin/strcmp: src/strcmp.c build
 
 .PHONY: swab
 swab: build/bin/swab
-build/bin/swab: src/swab.rs build rustlibs
-	$(RUSTC) $(RUSTFLAGS) -o $@ src/swab.rs
+build/bin/swab: src/swab.rs build build/o/libsysexits.rlib
+	$(RUSTC) $(RUSTFLAGS) --extern getopt=build/o/libgetopt.rlib \
+		--extern sysexits=build/o/libsysexits.rlib \
+		-o $@ src/swab.rs
 
 .PHONY: true
 true: build/bin/true

README

@@ -1,33 +1,28 @@
 “Seek not to walk the path of the masters; seek what they sought.”
 – Matsuo Basho
 
-Bonsai’s Harakit is an alternative to the standard POSIX utilities that aims to
-be simpler, easier, and more powerful. These tools are the result of careful
-examination of the current state common Unix utilities, POSIX-compliant and
-otherwise, following frustrations with design decisions and implementation
-details. They represent a vision of accomplishing everyday use cases with tools
-that follow the Unix philosophy of “do one thing and do it well” without
-clinging to the past.
+The Bonsai core utilities are the result of the careful examination of the
+current state of POSIX and Unix utilies. The Unix Philosophy, “do one thing and
+do it well” is its core but these tools do not cling to the names of the past.
 
-The intent of Harakit is not to conform to or extend POSIX, like the GNU or BSD
-utilities do, but to invent new utilities to perform the same tasks in more
-intuitive ways. GNU and BSD extensions are convenient but often unhealthy,
-forgetting the purposes of the tools they extend, or building into existing
-utilities features that would be more useful as their own tools to be used
-anywhere. Other utility sets aim to provide a number of fully-featured
-programs to be used individually, Harakit utilities are meant to be easily
-composable and work together in pipelines.
+The era of the original Unix tools has been long and fruitful, but they have
+their flaws. The new, non-POSIX era of this project started with frustration
+with the way certain tools work and how other projects that extend POSIX don’t
+make anything better.
+
+This project will not follow in the footsteps of GNU; extensions of POSIX will
+not be found here. GNU extensions are a gateway to the misuse of the shell. The
+Bonsai core utilities will intentionally discourage use of the shell for
+purposes beyond its scope.
 
 See docs/ for more on the specific utilities currently implemented.
 
-
 Building
-========
 
-Harakit utilities require a POSIX-compliant environment to compile, including a
-C compiler and preprocessor (cc(1) and cpp(1) by default), an edition 2023 Rust
-compiler (rustc(1) by default), bindgen(1), and a POSIX-compliant make(1)
-utility.
+The coreutils require a POSIX-compliant environment to compile, including a C
+compiler and preprocessor (cc(1) and cpp(1) by default) with the -idirafter
+flag, a Rust compiler (rustc(1) by default), bindgen(1), and a POSIX-compliant
+make(1) utility.
 
 To build and install:
 
@@ -43,26 +38,11 @@ To test the utilities:
 
 $ make test
 
-To remove all build and distributable files:
+To remove all untracked files:
 
 $ make clean
 
-
-Contributing
-============
-
-See the CONTRIBUTING file for contribution guidelines.
-
-
-Community
-=========
-
-xmpp://bonsai@covenant.murderu.us
-irc://feeling.murderu.us/#bonsai
-
-
 Read More
-=========
 
 An Introduction to the Unix Shell
 <https://porkmail.org/era/unix/shell>
@@ -76,10 +56,6 @@ Master Foo Discourses on the Unix-Nature
 Shell Programming!
 <https://tldp.org/LDP/abs/html/why-shell.html>
 
-UNIX Style, or cat -v Considered Harmful
-<http://harmful.cat-v.org/cat-v/>
-
-
 --
 Copyright © 2023–2024 Emma Tebibyte <emma@tebibyte.media>
 Copyright © 2024 DTB <trinity@trinity.moe>

STYLE

@@ -1,124 +0,0 @@
-The following guidelines are conducive to clear and readable code that is
-consistent with the style of the rest of the Bonsai Computer System.
-
-0. Braces are mandatory for all control flow.
-
-1. Nested indentation should be kept to a minimum.
-
-2. Empty lines should be placed between different kinds of statements:
-
-	int t;
-
-	assert(io->bufuse > 0);
-	assert(io->bufuse <= io->bs);
-
-	if ((t = write(io->fd, io->buf, io->bufuse)) < 0) {
-		io->error = errno;
-		t = 0;
-	} else if (t > 0) {
-		memmove(io->buf, &(io->buf)[t], (io->bufuse -= t));
-	}
-
-	io->bytes += t;
-	io->prec  += (t > 0 && io->bufuse > 0);
-	io->rec   += (t > 0 && io->bufuse == 0);
-
-	return io;
-
-3. Each block of code should be indented once more than the keyword which
-initiated the block:
-
-	switch (c) {
-		case 'e': mode |= EQUAL;   break;
-		case 'g': mode |= GREATER; break;
-		case 'l': mode |= LESS;    break;
-		default:  return usage(s);
-	}
-
-4. In C, spaces should be placed in control flow statements after the keyword
-and before the opening brace:
-
-	for (i = 2; i < argc; ++i) {
-
-5. If a function, a C control flow statement, or a Rust macro has arguments that
-cause the statement to be broken into multiple lines, this should be done by
-placing the arguments on a new line inside the parentheses: 
-
-	let usage = format!(
-		"Usage: {} [-d delimiter] index command [args...]",
-		argv[0],
-	);
-
-6. If Rust function arguments or fields are on their own lines, they should
-always have a trailing comma:
-
-	return Err(EvaluationError {
-		message: format!("{}: Invalid token", i),
-		code: EX_DATAERR,
-	})
-
-7. If text is on the same line as a brace, spaces should be placed after an
-opening curly brace and before a closing one:
-
-	use sysexits::{ EX_DATAERR, EX_IOERR, EX_UNAVAILABLE, EX_USAGE };
-
-8. If a control flow statement is short enough to be easily understood in a
-glance, it may be placed on a single line:
-
-	if !(argc < 0) { usage(program_name); }
-
-9. In C, note everything you use from a library in a comment subsequent to its
-#include statement:
-
-	#include <unistd.h> /* close(2), getopt(3), lseek(2), read(2), write(2),
-                         * optarg, optind, STDIN_FILENO, STDOUT_FILENO */
-
-10. In Rust, place extern statements after use statements that include standard
-library crates. Group alike statements:
-
-	use std::fs::Path;
-
-	extern crate strerror;
-	extern crate sysexits;
-
-	use strerror::StrError;
-	use sysexits::{ EX_OSERR, EX_USAGE };
-
-11. Do not use do while loops in C.
-
-12. Adhere to the following rules from the paper The Power of 10: Rules for
-Developing Safety-Critical Code [0]:
-	1. Avoid complex flow constructs, such as goto and recursion.
-	2. All loops must have fixed bounds. This prevents runaway code.
-	3. Avoid heap memory allocation.
-	4. Restrict functions to the length of a single printed page.
-
-	6. Restrict the scope of data to the smallest possible.
-	7. Check the return value of all non-void functions, or cast to void to
-	indicate the return value is useless (such as in the case of using
-	fprintf(3p)	to print to the standard error).
-	8. Use the preprocessor sparingly.
-	9. Limit pointer use to a single dereference, and do not use function
-	pointers.
-	10. Compile with all possible warnings active; all warnings should then be
-	addressed before release of the software (for C compilers, compile with
-	-Wpedantic).
-
-13. Remember this quote from The Elements of Programming Style by Brian
-Kernighan:
-	Everyone knows that debugging is twice as hard as writing a program in the
-	first place. So if you're as clever as you can be when you write it, how
-	will you ever debug it?
-
-
-References
-==========
-
-[0] <https://web.eecs.umich.edu/~imarkov/10rules.pdf>
-
---
-Copyright © 2024 Emma Tebibyte <emma@tebibyte.media>
-Copyright © Wikipedia contributors
-
-This work is licensed under CC BY-SA 4.0. To view a copy of this license, visit
-<http://creativecommons.org/licenses/by-sa/4.0/>.

docs/dj.1

@@ -1,226 +1,160 @@
 .\" Copyright (c) 2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH DJ 1 2024-07-14 "Harakit X.X.X"
+
+.TH dj 1
+
 .SH NAME
+
 dj \(en disk jockey
-.\"
+
 .SH SYNOPSIS
 
 dj
-.RB [ -Hn ]
-.RB [ -a\ byte ]
-.RB [ -c\ count ]
+.RB ( -AdHnq )
+.RB ( -a
+.RB [ byte ])
+.RB ( -c
+.RB [ count ])
 
-.RB [ -i\ file ]
-.RB [ -b\ block_size ]
-.RB [ -s\ offset ]
+.RB ( -i
+.R [
+.B input file
+.R ])
+.RB ( -b
+.R [
+.B input block size
+.R ])
+.RB ( -s
+.R [
+.B input offset
+.R ])
 
-.RB [ -o\ file ]
-.RB [ -B\ block_size ]
-.RB [ -S\ offset ]
-.\"
-.SH DESCRIPTION
+.RB ( -o
+.R [
+.B output file
+.R ])
+.RB ( -B
+.R [
+.B output block size
+.R ])
+.RB ( -S
+.R [
+.B output offset
+.R ])
 
-Perform precise read and write operations on files. This utility is useful for
-reading and writing binary data to and from disks.
+.SH USAGE
 
-This manual page uses the terms \(lqskip\(rq and \(lqseek\(rq to refer to moving
-to a specified byte by index in the input and output of the program
-respectively. This language is inherited from the
-.BR dd (1p)
-utility and used here to decrease ambiguity.
+The
+.B -i
+option takes a path as an argument to open and use in place of standard input.
+The
+.B -o
+option does the same in place of standard output. Dj does not truncate output
+files and instead writes over the bytes in the existing file.
+.PP
+The
+.B -b
+option takes a numeric argument as the size in bytes of the input buffer and
+the
+.B -B
+option does the same for the output buffer, the default for both being 1024
+bytes, or one kibibyte (KiB).
+.PP
+The
+.B -s
+option takes a numeric argument as the number of bytes to skip into the input
+before starting to read, and the
+.B -S
+option skips a number of bytes through the output before starting to write from
+the input. If the input is a stream the bytes are read and discarded. If the
+output is a stream, nul characters are printed.
+.PP
+The
+.B -a
+option takes one argument of one byte in length and pads the input buffer with
+that byte in the event that a read doesn't fill the input buffer, and the
+.B -A
+option takes no arguments and pads with nuls.
+The
+.B -c
+option specifies an amount of reads to make, and if 0 (the default) dj will
+continue reading until a partial or empty read.
+.PP
+On a partial or empty read, dj prints a diagnostic message (unless the
+.B -q
+option is specified) and exits (unless the
+.B -n
+option is specified, in which case only two consecutive empty reads will cause
+dj to exit).
+At exit, usage statistics are printed unless the option
+.B -q
+is specified a second time. The
+.B -H
+option will make these diagnostics human-readable.
 
-The offset used when skipping or seeking refers to how many bytes are skipped
-or sought. Running
-.BR dj (1)
-with a skip offset of 1 skips one byte into the input and reads from the second
-byte onwards. A programmer may think of a file as a zero-indexed array of
-bytes; in this analogy, the offset given is the index of the byte at which to
-start reading or writing.
-.\"
-.SH OPTIONS
-
-.IP \fB-i\fP\ \fIfile\fP
-Takes a file path as an argument and opens it for use as an input.
-.IP \fB-b\fP\ \fIblock_size\fP
-Takes a numeric argument as the size in bytes of the input buffer, the default
-being 1024.
-.IP \fB-s\fP
-Takes a numeric argument as the index of the byte at which reading will
-commence; \(lqskips\(rq that number of bytes. If the standard input is used,
-bytes read to this point are discarded.
-.IP \fB-o\fP
-Takes a file path as an argument and opens it for use as an output.
-.IP \fB-B\fP\ \fIblock_size\fP
-Takes a numeric argument as the size in bytes of the output buffer, the default
-being 1024. Note that this option only affects the size of output writes and not
-the amount of output data itself. See the CAVEATS section.
-.IP \fB-S\fP
-Takes a numeric argument as the index of the byte at which writing will
-commence; \(lqseeks\(rq that number of bytes. If the standard output is used,
-null characters are printed.
-.IP \fB-a\fP
-Accepts a single literal byte with which the input buffer is padded in the event
-of an incomplete read from the input file. If the option argument is empty, the
-null byte is used.
-.IP \fB-c\fP
-Specifies a number of blocks to read. The default is 0, in which case the input
-is read until a partial or empty read is made.
-.IP \fB-H\fP
-Prints diagnostic messages in a human-readable manner as described in the
-DIAGNOSTICS section.
-.IP \fB-n\fP
-Retries failed reads once before exiting.
-.\"
-.SH STANDARD INPUT
-
-The standard input shall be used as an input if no inputs are specified or if
-input file is \(lq-\(rq.
-.\"
-.SH STANDARD OUTPUT
-The standard output shall be used as an output if no inputs are specified or if
-the output file is \(lq-\(rq.
-.\"
-.SH EXAMPLES
-
-The following
-.BR sh (1p)
-line:
-
-.RS
-printf 'Hello, world!\(rsn' | dj -c 1 -b 7 -s 7 2>/dev/null
-.RE
-
-Produces the following output:
-
-.RS
-world!
-.RE
-
-The following
-.BR sh (1p)
-lines run sequentially:
-
-.RS
-tr '\(rs0' 0    </dev/zero | dj -c 1 -b 6 -o hello.txt
-
-tr '\(rs0' H    </dev/zero | dj -c 1 -b 1 -o hello.txt
-
-tr '\(rs0' e    </dev/zero | dj -c 1 -b 1 -o hello.txt -S 1
-
-tr '\(rs0' l    </dev/zero | dj -c 1 -b 2 -o hello.txt -S 2
-
-tr '\(rs0' o    </dev/zero | dj -c 1 -b 1 -o hello.txt -S 4
-
-tr '\(rs0' '\(rsn' </dev/zero | dj -c 1 -b 1 -o hello.txt -S 5
-
-dj -i hello.txt
-.RE
-
-Produce the following output:
-
-.RS
-Hello
-.RE
-
-It may be particularly illuminating to print the contents of the example
-.B hello.txt
-after each
-.BR dj (1)
-invocation.
-.\"
 .SH DIAGNOSTICS
 
-On a partial or empty read, a diagnostic message is printed. Then, the program
-exits unless the
-.B -n
-option is specified.
-
-By default, statistics are printed for input and output to the standard error in
-the following format:
-
-.RS
-{records read} {ASCII unit separator} {partial records read}
-{ASCII record separator} {records written} {ASCII unit separator}
-{partial records written} {ASCII group separator} {bytes read}
-{ASCII record separator} {bytes written} {ASCII file separator}
-.RE
-
-This format for diagnostic output is designed to be machine-parseable for
-convenience. For a more human-readable format, the
+The
+.B -d
+option prints all information, user-specified or otherwise, before program
+execution.
+.PP
+When dj exits, by default statistics are printed for input and output to
+standard error in the following format:
+.PP
+.R {records read} {ASCII unit separator} {partial records read}
+.R {ASCII record separator} {records written} {ASCII unit separator}
+.R {partial records written} {ASCII group separator} {bytes read}
+.R {ASCII record separator} {bytes written} {ASCII file separator}
+.PP
+If the
 .B -H
-option may be specified. In this event, the following format is used instead:
-
-.RS
-{records read} '+' {partial records read} '>' {records written}
-'+' {partial records written} ';' {bytes read} '>' {bytes written}
-{ASCII line feed}
-.RE
-
-In non-recoverable errors that don\(cqt pertain to the read-write cycle, a
-diagnostic message is printed and the program exits with the appropriate
-.BR sysexits.h (3)
+option is specified dj instead uses this following format:
+.PP
+.R {records read} '+' {partial records read} '>' {records written}
+.R '+' {partial records written} ';' {bytes read} '>' {bytes written}
+.R {ASCII line feed}
+.PP
+The
+.B -q
+option suppresses error messages which print when a read or write is partial or
+empty and when used twice suppresses diagnostic output entirely.
+.PP
+In non-recoverable errors that don't pertain to dj's read-write cycle, a
+diagnostic message is printed and dj exits with the appropriate sysexits(3)
 status.
-.\"
+
 .SH BUGS
 
 If
 .B -n
-is specified along with the
-.B -c
-option and a count, actual byte output is the product of the count and the input
-block size and therefore may be lower than expected. If the
+is specified along with a specified count, actual byte output may be lower than
+expected (the product of the count multiplied by the input block size). If the
 .B -a
-option is specified, this could make written data nonsensical.
-.\"
-.SH CAVEATS
+or
+.B -A
+options are used this could make data written nonsensical.
+.PP
+Many lowercase options have capitalized variants and vice-versa which can be
+confusing. Capitalized options tend to affect output or are more intense
+versions of lowercase options.
 
-Existing files are not truncated on ouput and are instead overwritten.
-
-Option variants that have lowercase and uppercase forms could be confused for
-each other. The former affects input and the latter affects output.
-
-The
-.B -B
-option could be mistaken for the count in bytes of data written to the output.
-This conception is intuitive but incorrect, as the
-.B -c
-option controls the number of blocks to read and the
-.B -b
-option sets the size of the blocks. The
-.B -B
-option is similar to the latter but sets the size of blocks to be written,
-regardless of the amount of data that will actually be written. In practice,
-this means the input buffer should be very large to make use of modern hardware
-input and output speeds.
-
-The skipped or sought bytes while processing irregular files, such as streams,
-are reported in the diagnostic output, because they were actually read or
-written. This is as opposed to bytes skipped while processing regular files,
-which are not reported.
-.\"
 .SH RATIONALE
 
-This program was based on the
-.BR dd (1p)
-utility as specified in POSIX. While character conversion may have been the
-original intent of
-.BR dd (1p),
-it is irrelevant to its modern use. Because of this, this program eschews
-character conversion and adds typical option formatting, allowing seeks to be
-specified in bytes rather than in blocks, allowing arbitrary bytes as padding,
-and printing in a format that\(cqs easy for machines to parse.
-.\"
+Dj was modeled after the dd utility specified in POSIX but adds additional
+features: typical option formatting, allowing seeks to be specified in bytes
+rather than in blocks, allowing arbitrary bytes as padding, and printing in a
+format that's easy to parse for machines. It also neglects character
+conversion, which may be dd's original intent but is irrelevant to its modern
+use.
+
 .SH COPYRIGHT
 
-Copyright \(co 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
+Copyright (C) 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-.\"
+
 .SH SEE ALSO
-.BR dd (1p)
-.BR lseek (3p)
-.BR mm (1)
+
+dd(1)

docs/false.1

@@ -1,35 +1,35 @@
 .\" Copyright (c) 2022, 2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH FALSE 1 2024-06-06 "Harakit X.X.X"
+
+.TH FALSE 1
+
 .SH NAME
+
 false \(en do nothing, unsuccessfully
-.\"
+
 .SH DESCRIPTION
 
-Do nothing regardless of operands or standard input. An exit code of 1 will
-always be returned.
-.\"
+False does nothing regardless of operands or standard input.
+False will always return an exit code of 1.
+
 .SH RATIONALE
 
-In POSIX.1-2017,
-.BR false (1p)
-exists for the construction of control flow and loops based on a failure. This
-implementation functions as described in that standard.
-.\"
+False exists for the construction of control flow and loops based on a failure.
+
+False functions as described in POSIX.1-2017.
+
 .SH AUTHOR
 
-Written by Emma Tebibyte
-.MT emma@tebibyte.media
-.ME .
-.\"
+Written by Emma Tebibyte <emma@tebibyte.media>.
+
 .SH COPYRIGHT
 
 This work is marked with CC0 1.0. To see a copy of this license, visit
 <http://creativecommons.org/publicdomain/zero/1.0>.
-.\"
+
 .SH SEE ALSO
-.BR true (1p)
+
+true(1p)

docs/fop.1

@@ -1,62 +0,0 @@
-.\" Copyright (c) 2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-.\"
-.\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
-.\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH FOP 1 2024-06-17 "Harakit X.X.X"
-.SH NAME
-fop \(en field operator
-.\"
-.SH SYNOPSIS
-
-fop
-.RB ( -d )
-.RB [ delimiter ]
-.RB index 
-.RB program...
-.\"
-.SH DESCRIPTION
-
-Performs operations on specified fields in data read from the standard input.
-.\"
-.SH OPTIONS
-
-.IP \fB-d\fP\ \fIdelimiter\fP
-Sets a delimiter by which the input data will be split into fields. The default
-is an ASCII record separator.
-.\"
-.SH CAVEATS
-
-Field indices are zero-indexed, which may be unexpected behavior for some users.
-.\"
-.SH RATIONALE
-
-With the assumption that tools will output data separated with ASCII field
-separators, there is a need for the ability to modify select fields in this data
-easily and quickly.
-
-The idea for this utility originated in the fact that the GNU
-.BR ls (1)
-utility contains a
-.B -h
-option which enables human-readable units in file size outputs. This
-functionality was broken out into
-.BR hru (1),
-but there was no easy way to modify the field in the ouput of
-.BR ls (1p)
-without creating a new tool.
-.\"
-.SH AUTHOR
-
-Written by Emma Tebibyte
-.MT emma@tebibyte.media
-.ME .
-.\"
-.SH COPYRIGHT
-
-Copyright \(co 2024 Emma Tebibyte. License AGPLv3+: GNU AGPL version 3 or later
-<https://gnu.org/licenses/agpl.html>.
-.\"
-.SH SEE ALSO
-.BR sed (1p)

docs/hru.1

@@ -2,68 +2,56 @@
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH HRU 1 2024-06-17 "Harakit X.X.X"
+
+.TH rpn 1
+
 .SH NAME
+
 hru \(en human readable units
-.\"
+
 .SH SYNOPSIS
 
 hru
-.\"
+
 .SH DESCRIPTION
 
-Convert counts to higher units.
-
-Byte counts will be read in the form of whole numbers from the standard input
-and be written to the standard output the same number converted to a higher unit
-of data as defined by the \fIInternational System of Units\fP.
+Hru reads byte counts in the form of whole numbers from the standard input and
+writes to the standard output the same number converted one of the units of data
+defined by the International System of Units.
 
 The program will convert the byte count to the highest unit possible where the
 value is greater than one.
-.\"
+
 .SH DIAGNOSTICS
 
-If encountering non-integer characters in the standard input, the program will
-exit with the appropriate error code as defined by
-.BR sysexits.h (3)
-and print an error message.
-.\"
+If encountering non-integer characters in the standard input, hru will exit with
+the appropriate error code as defined by sysexits.h(3) and print an error
+message.
+
 .SH RATIONALE
 
-The GNU project\(cqs
-.BR ls (1)
-implementation contains a human-readable option (\fB-h\fP) that, when specified,
-makes the tool print size information in a format more immediately
-readable. This functionality is useful not only in this context, so the decision
-was made to split it into a new tool. The original functionality from GNU\(cqs
-.BR ls (1)
-can be emulated with
-.BR fop (1)
-combined with this program.
-.\"
+The GNU project’s ls(1) implementation contains a human-readable option (-h)
+that, when specified, makes the tool print size information in a format more
+immediately readable. This functionality is useful not only in the context of
+ls(1) so the decision was made to split it into a new tool. The original
+functionality in GNU’s ls(1) can be emulated with fop(1) combined with this
+program.
+
 .SH STANDARDS
 
-The standard unit prefixes as specified by the
-.I Bureau International des Poids et Mesures
-.RI ( BIPM )
-in the ninth edition of
-.I The International System of Units
-.RI ( SI )
-are utilized for the ouput of conversions.
-.\"
+Hru follows the standard unit prefixes as specified by the Bureau International
+des Poids et Mesures (BIPM) in the ninth edition of The International System of
+Units (SI).
+
 .SH AUTHOR
 
-Written by Emma Tebibyte
-.MT emma@tebibyte.media
-.ME .
-.\"
+Written by Emma Tebibyte <emma@tebibyte.media>.
+
 .SH COPYRIGHT
 
-Copyright \(co 2024 Emma Tebibyte. License AGPLv3+: GNU AGPL version 3 or later
+Copyright (c) 2024 Emma Tebibyte. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-.\"
+
 .SH SEE ALSO
-GNU
-.BR ls (1),
-.I The International System of Units (SI) 9th Edition
+
+GNU ls(1), The International System of Units (SI) 9th Edition

docs/intcmp.1

@@ -1,103 +1,78 @@
 .\" Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH INTCMP 1 2024-06-06 "Harakit X.X.X"
+
+.TH intcmp 1
+
 .SH NAME
+
 intcmp \(en compare integers
-.\"
+
 .SH SYNOPSIS
 
 intcmp
-.RB [ -egl ]\ integer\ integer...
+.RB ( -eghl )
+.RB [ integer ]
+.RB [ integer... ]
+
 .SH DESCRIPTION
-Compare integers to each other.
-.\"
-.SH OPTIONS
 
-.IP \fB-e\fP
-Permits given integers to be equal to each other.
-.IP \fB-g\fP
-Permits a given integer to be greater than the following integer.
-.IP \fB-l\fP
-Permits a given integer to be less than the following integer.
-.\"
-.SH EXAMPLES
+Intcmp compares integers.
+
+.SH USAGE
+
+The -e option permits given integers to be equal to each other. If combined
+with -g or -l, only adjacent integers in the argument sequence can be equal.
+.PP
+The -g option permits a given integer to be greater than the following integer.
+.PP
+The -l option permits a given integer to be less than the following integer.
+.PP
+It may help to think of the -e, -g, and -l options as equivalent to the
+infix algebraic “=”, “>”, and “<” operators respectively, with each option
+putting its symbol between every given integer. For example,
+.R intcmp -l 1 2 3
+is equivalent to evaluating "1 < 2 < 3".
 
-It may help to think of the
-.BR -e ,
-.BR -g ,
-and
-.B -l
-options as equivalent to the infix algebraic \(lq=\(rq, \(lq>\(rq, and \(lq<\(rq
-operators respectively, with each option putting its symbol between every given
-integer. The following example is equivalent to evaluating \(lq1 < 2 < 3\(rq:
-\"
-.RS
-intcmp -l 1 2 3
-.RE
-.\"
 .SH DIAGNOSTICS
 
-The program will exit with a successfully for a valid expression and with an
-error code of 1 for an invalid expression.
+Intcmp exits 0 for a valid expression and 1 for an invalid expression.
+.PP
+Intcmp prints a debug message and exits with the appropriate sysexits(3) error
+code in the event of an error.
 
-In the event of an error, a debug message will be printed and the program will
-exit with the appropriate
-.BR sysexits.h (3)
-error code.
-.\"
 .SH BUGS
 
-.BR -egl ,
-\(lqequal to or less than or greater than\(rq, always exits successfully for
-valid program usage and may be abused to function as an integer validator. Use
-.BR str (1)
-instead.
-.\"
-.SH CAVEATS
+There are multiple ways to express compound comparisons; “less than or equal
+to” can be -le or -el, for example.
+.PP
+The inequality comparison is -gl or -lg for “less than or greater than”; this
+is elegant but unintuitive.
+.PP
+-egl, "equal to or less than or greater than", exits 0 no matter what for valid
+program usage and may be abused to function as an integer validator.
+Use str(1) instead.
 
-There are multiple ways to express compound comparisons; \(lqless than or equal
-to\(rq can be
-.B -le
-or
-.BR -el ,
-for example.
-
-The inequality comparison is
-.B -gl
-.B or
-.B -lg
-for \(lqless than or greater than\(rq;
-this is elegant but unintuitive.
-.\"
 .SH RATIONALE
 
 The traditional tool for integer comparisons in POSIX and other Unix shells has
-been
-.BR test (1).
-This tool also handles string comparisons and file scrutiny. These parts of its
-functionality have been broken out into multiple utilities.
+been test(1). This tool also handles string comparisons and file scrutiny.
+These parts of its functionality have been broken out into multiple utilities.
+
+Strcmp’s functionality may be performed on a POSIX-compliant system with
+test(1p).
 
-This program\(cqs functionality may be performed on a POSIX-compliant system
-with
-.BR test (1p).
-.\"
 .SH AUTHOR
 
-Written by DTB
-.MT trinity@trinity.moe
-.ME .
-.\"
+Written by DTB <trinity@trinity.moe>.
+
 .SH COPYRIGHT
-.\"
-Copyright \(co 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
+
+Copyright © 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/gpl.html>.
-.\"
+
 .SH SEE ALSO
-.BR scrut (1),
-.BR strcmp (1),
-.BR str (1),
-.BR test (1p)
+
+strcmp(1), scrut(1), str(1), test(1p)

docs/mm.1

@@ -2,72 +2,75 @@
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH MM 1 2024-07-14 "Harakit X.X.X"
+
+.TH mm 1
+
 .SH NAME
+
 mm \(en middleman
-.\"
+
 .SH SYNOPSIS
 
 mm
-.RB [ -aetu ]
-.RB [ -i\ input ]
-.RB [ -o\ output ]
-.\"
+.RB ( -aenu )
+.RB ( -i
+.RB [ input ])
+.RB ( -o
+.RB [ output ])
+
 .SH DESCRIPTION
 
-Catenate input files and write them to the start of each output file or stream.
-.\"
+Mm catenates input files and writes them to the start of each output file.
+
 .SH OPTIONS
 
-.IP \fB-a\fP
-Opens outputs for appending rather than updating.
-.IP \fB-e\fP
-Use the standard error as an output.
-.IP \fB-t\fP
-Causes outputs to be overwritten instead of being truncated.
-.IP \fB-u\fP
-Ensures neither input or output will be buffered.
-.IP \fB-i\fP\ \fIinput\fP
-Opens a path as an input. If one or more of the input files is \(lq-\(rq or if
-no inputs are specified, the standard input shall be used. If specified as the
-last option and if there are trailing arguments to the program, they shall be
-appended to the list of files to use as inputs.
-.IP \fB-o\fP\ \fIoutput\fP
-Opens a path as an output. If one or more of the output files is \(lq-\(rq or if
-no outputs are specified and the
+Mm, upon receiving the
+.B -a
+option, will open subsequent outputs for appending rather than updating.
+.PP
+The
+.B -i
+option opens a path as an input. Without any inputs specified mm will use
+standard input. Standard input itself can be specified by giving the path '-'.
+.PP
+The
+.B -o
+option opens a path as an output. Without any outputs specified mm will use
+standard output. Standard output itself can be specified by giving the
+path '-'. Standard error itself can be specified with the
 .B -e
-option is not specified, the standard output shall be used. If specified as the
-last option and if there are trailing arguments to the program, they shall be
-appended to the list of files to use as outputs.
-.\"
+option.
+.PP
+The
+.B -u
+option ensures neither input or output will be buffered.
+.PP
+The
+.B -n
+option tells mm to ignore SIGINT signals.
+
 .SH DIAGNOSTICS
 
-If an output cannot be written to, an error occurs; however, exiting will be 
-deferred until writing to any other specified outputs completes.
+If an output can no longer be written mm prints a diagnostic message, ceases
+writing to that particular output, and if there are more outputs specified,
+continues, eventually exiting unsuccessfully.
+.PP
+On error mm prints a diagnostic message and exits with the appropriate
+sysexits.h(3) status.
+
+.SH BUGS
+
+Mm does not truncate existing files, which may lead to unexpected results.
 
-When an error is encountered, a diagnostic message is printed and the program
-exits with the appropriate
-.BR sysexits.h (3)
-status.
-.\"
 .SH RATIONALE
 
-The
-.BR cat (1p)
-and
-.BR tee (1p)
-programs specified in POSIX together provide similar functionality. The
-separation of the two sets of functionality into separate APIs seemed
-unncessary.
-.\"
+Mm was modeled after the cat and tee utilities specified in POSIX.
+
 .SH COPYRIGHT
 
-Copyright \(co 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
+Copyright (c) 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-.\"
+
 .SH SEE ALSO
-.BR cat (1p),
-.BR dd (1),
-.BR dj (1),
-.BR tee (1p)
+
+cat(1p), dd(1), dj(1), tee(1p)

docs/npc.1

@@ -1,74 +1,68 @@
 .\" Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH NPC 1 2024-06-17 "Harakit X.X.X"
+
+.TH npc 1
+
 .SH NAME
+
 npc \(en show non-printing characters
-.\"
+
 .SH SYNOPSIS
 
 npc
-.RB [ -et ]
-.\"
+.RB ( -eht )
+
 .SH DESCRIPTION
 
-Print normally non-printing characters.
-
-The program reads from standard input and writes to standard output, replacing
-non-printing characters with printable equivalents. Control characters print as
-a carat ('^') followed by the character '@' through '_' corresponding to the
-character replaced (e.g. control-X becomes '^X'). The delete character (0x7F)
-becomes '^?'. Characters with the high bit set (>127) are printed as 'M-'
+Npc reads from standard input and writes to standard output, replacing non-
+printing characters with printable equivalents. Control characters print as a
+carat ('^') followed by the character '@' through '_' corresponding to the
+character replaced (e.g. control-X becomes "^X"). The delete character (0x7F)
+becomes "^?". Characters with the high bit set (>127) are printed as "M-"
 followed by the graphical representation for the same character without the
 high bit set.
-.\"
-.SH OPTIONS
+.PP
+The
+.B -e
+option prints a currency sign ('$') before each line ending.
+.PP
+The
+.B -t
+option prints tab characters as "^I" rather than a literal horizontal tab.
 
-.IP \fB-e\fP
-Prints a dollar sign ('$') before each newline.
-.IP \fB-t\fP
-Prints tab characters as '^I' rather than a literal horizontal tab.
-.\"
 .SH DIAGNOSTICS
 
-In the event of an error, a debug message will be printed and the program will
-exit with the appropriate
-.BR sysexits.h (3)
-error code.
-.\"
+Npc prints a debug message and exits with the appropriate sysexits(3) error
+code in the event of an error, otherwise it exits successfully.
+
 .SH BUGS
 
-The program operates in single-byte chunks regardless of intended encoding.
-.\"
+Npc operates in single-byte chunks regardless of intended encoding.
+
 .SH RATIONALE
 
 POSIX currently lacks a way to display non-printing characters in the terminal
-using a standard tool. A popular extension to
-.BR cat (1p),
-the
-.B -v
-option, is the bandage solution GNU and other software suites use.
+using a standard tool. A popular extension to cat(1p), the -v option, is the
+bandage solution GNU and other software suites use.
+
+This functionality should be a separate tool because its usefulness extends
+beyond that of cat(1p).
 
-This functionality is included in a separate tool because its usefulness extends
-beyond that of
-.BR cat (1p).
-.\"
 .SH AUTHOR
 
-Written by DTB
-.MT trinity@trinity.moe
-.ME .
-.\"
+Written by DTB <trinity@trinity.moe>.
+
 .SH COPYRIGHT
 
 Copyright © 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-.\"
+
 .SH SEE ALSO
-.BR cat (1p),
-.BR cat-v (1),
+
+cat(1p), cat-v(1)
+
 .I UNIX Style, or cat -v Considered Harmful
 by Rob Pike

docs/peek.1

@@ -1,111 +0,0 @@
-.\" Copyright (c) 2023-2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-.\"
-.\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
-.\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH PEEK 1 2024-08-14 "Harakit X.X.X"
-.SH NAME
-peek \(en read from the standard input, furtively
-.\"
-.SH SYNOPSIS
-
-peek
-.RB [ -i ]
-.\"
-.SH DESCRIPTION
-
-Read input from the standard input with terminal echo disabled.
-.\"
-.SH OPTIONS
-
-.IP \fB-i\fP
-Allows input to come from sources other than terminals (pipes).
-.\"
-.SH DIAGNOSTICS
-
-In the event of an error, a debug message will be printed and the program will
-exit with the appropriate
-.BR sysexits.h (3)
-error code.
-
-In order to ensure the user\(cqs terminal is still usable after premature
-termination, the program attempts to handle the SIGINT signal; if it cannot,
-an error message is printed and execution continues. If the program is
-interrupted, it exits unsuccessfully without an error message.
-.\"
-.SH RATIONALE
-
-This tool was originally written to accept passwords in shell scripts as an
-extremely simple alternative to the GNU Privacy Guard project\(cqs
-.BR pinentry (1)
-utility.
-
-Accepting input without showing what is being typed is useful when keying in
-secrets in public settings or in places where surveillance cameras are
-installed.
-.\"
-.SH CAVEATS
-
-This program does nothing to prevent others from seeing the key presses input to
-a keyboard. It also does not protect against the sound of typing being analyzed
-to determine what was input without needing to see screen or keyboard.
-
-Accepting secrets in shell scripts is probably not advisable.
-
-On systems that support it, the
-.BR ioctl (2)
-command TIOCSTI can be used to insert characters into the standard input. This
-doesn't allow snooping but can be used for general mischief.
-.\"
-.SH EXAMPLES
-
-This is an
-.BR sh (1p)
-command line that hashes a given password. It uses
-.BR head (1p)
-to only accept one line of input,
-.BR xargs (1p)
-and
-.BR printf (1p)
-to strip the trailing newline,
-.BR htpasswd (1) 
-from Apache\(cqs utilities to hash the input with the bcrypt algorithm, and
-.BR cut (1p)
-to print only the resulting hash:
-
-.RS
-$ peek | head -n 1 | xargs printf '%s' | htpasswd -nBi _ | cut -d : -f 2
-.RE
-
-This is an
-.BR sh (1p)
-command line that allows a user to write blindly into a text file but displaying
-only written lines. Some writers have the habit of prematurely revising their 
-work and use tools with functionality similar to this to prevent it. 
-It uses
-.BR mm (1)
-to pipe the output of the program to both the standard error and the regular
-file writing.txt:
-
-.RS
-$ echo Input ^D to quit. && peek | mm -eo - >writing.txt
-.RE
-.\"
-.SH AUTHOR
-
-Written by DTB
-.MT trinity@trinity.moe
-.ME .
-.\"
-.SH COPYRIGHT
-
-Copyright \(co 2023-2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
-<https://gnu.org/licenses/gpl.html>.
-.\"
-.SH SEE ALSO
-.BR ioctl (2),
-.BR ioctl_tty (2),
-.BR read (1p),
-.BR sh (1p),
-.BR stty (1p)

docs/pg.1

@@ -0,0 +1,41 @@
+.\" Copyright (c) 2024 DTB <trinity@trinity.moe>
+.\"
+.\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
+.\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
+
+.TH PG 1
+
+.SH NAME
+
+pg \(en paginate
+
+.SH SYNOPSIS
+
+pg
+.RB ( -p
+.RB [ prompt ])
+
+.SH DESCRIPTION
+
+Pg prints standard input to standard output, accepting commands between pages.
+
+.SH OPTIONS
+
+.B -p
+.RS
+Replaces the default prompt (": ") with the next argument.
+.RE
+
+.SH DIAGNOSTICS
+
+Pg returns an unsuccessful exit code if the tty couldn't be opened or if pg was
+invoked incorrectly (with any arguments).
+
+.SH RATIONALE
+
+Plan 9 from Bell Labs had p(1), a similar "cooked"-mode paginator (as opposed
+to "raw" mode, which a vast majority of paginators use).
+
+.SH SEE ALSO
+
+more(1)

docs/rpn.1

@@ -3,84 +3,68 @@
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH RPN 1 2024-06-17 "Harakit X.X.X"
+
+.TH rpn 1
+
 .SH NAME
+
 rpn \(en reverse polish notation evaluation
-.\"
+
 .SH SYNOPSIS
 
 rpn
-.RB [ numbers... ]
-.RB [ operators... ]
-.\"
+.RB [numbers...]\ [operators...]
+
 .SH DESCRIPTION
 
-Evaluate reverse polish notation.
+Rpn evaluates reverse polish notation expressions either read from the standard
+input or parsed from provided arguments. See the STANDARD INPUT section.
 
-The program evaluates reverse polish notation expressions read either from the
-standard input or parsed from provided arguments. See the STANDARD INPUT
-section.
-
-Upon evaluation, the resulting number on the stack will be printed to the
-standard output. Any further numbers specified will be placed at the end of the
+Upon evaluation, rpn will print the resulting number on the stack to the
+standard output. Any further specified numbers will be placed at the end of the
 stack.
 
-For information on for reverse polish notation syntax, see
-.BR rpn (7).
-.\"
+For information on for reverse polish notation syntax, see rpn(7).
+
 .SH STANDARD INPUT
 
-If arguments are specified, they are interpreted as an expression to be
-evaluated. Otherwise, whitespace-delimited numbers and operations are read from
+If arguments are passed to rpn, it interprets them as an expression to be
+evaluated. Otherwise, it reads whitespace-delimited numbers and operations from
 the standard input.
-.\"
+
 .SH DIAGNOSTICS
 
-In the event of an error, a debug message will be printed and the program will
-exit with the appropriate
-.BR sysexits.h (3)
-error code; however, in the event of a syntax error, the program will print an
-error message and continue accepting input.
-.\"
+If encountering a syntax error, rpn will exit with the appropriate error code
+as defined by sysexits.h(3) and print an error message.
+
 .SH CAVEATS
 
 Due to precision constraints and the way floats are represented in accordance
-with the
-.I IEEE Standard for Floating Point Arithmetic
-(\fIIEEE 754\fP), floating-point arithmetic has rounding errors. This is
-somewhat curbed by using the machine epsilon as provided by the Rust standard
-library to which numbers are rounded. Because of this, variation is expected in
-the number of decimal places the program can handle based on the platform and
-hardware of any given machine.
-.\"
+with the IEEE Standard for Floating Point Arithmetic (IEEE 754), floating-point
+arithmetic has rounding errors. This is somewhat curbed by using the
+machine epsilon as provided by the Rust standard library to which to round
+numbers. Because of this, variation is expected in the number of decimal places 
+rpn can handle based on the platform and hardware of any given machine.
+
 .SH RATIONALE
 
-An infix notation calculation utility,
-.BR bc (1p),
-is included in the POSIX standard, but does not accept expressions as arguments;
-in scripts, any predefined, non-interactive input must be piped into the
-program. A
-.BR dc (1)
-pre-dates the standardized
-.BR bc (1p),
-the latter originally being a preprocessor for the former, and was included in
-Second Edition UNIX and onward. While it implements reverse polish notation, it
-still suffers from being unable to accept an expression as an argument.
-.\"
+An infix notation calculation utility, bc(1p), is included in the POSIX
+standard, but does not accept expressions as arguments; in scripts, any
+predefined, non-interactive input must be piped into the program. A dc(1)
+pre-dates the standardized bc(1p), the latter originally being a preprocessor
+for the former, and was included in UNIX v2 onward. While it implements reverse
+polish notation, it still suffers from being unable to accept an expression as
+an argument.
+
 .SH AUTHOR
 
-Written by Emma Tebibyte
-.MT emma@tebibyte.media
-.ME .
-.\"
+Written by Emma Tebibyte <emma@tebibyte.media>.
+
 .SH COPYRIGHT
 
 Copyright (c) 2024 Emma Tebibyte. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-.\"
+
 .SH SEE ALSO
-.BR bc (1p),
-.BR dc (1),
-.BR rpn (7),
-.I IEEE 754
+
+bc(1p), dc(1), rpn(7), IEEE 754

docs/scrut.1

@@ -1,86 +1,93 @@
 .\" Copyright (c) 2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH SCRUT 1 2024-06-06 "Harakit X.X.X"
+
+.TH scrut 1
+
 .SH NAME
+
 scrut \(en scrutinize file properties
+
 .SH SYNOPSIS
 
 scrut
-.RB [ -LSbcdefgkprsuwx ]
-.B file...
-.\"
+.RB ( -bcdefgkprsuwxLS )
+.RB [ file... ]
+
 .SH DESCRIPTION
 
-Determine if files comply with requirements. If the given files comply with the
-specified requirements, the program will exit successfully. Otherwise, it exits
-unsuccessfully.
-.\"
+Scrut determines if given files comply with the opted requirements.
+
 .SH OPTIONS
 
-.IP \fB-L\fB
-Requires the given files to exist and be symbolic links.
-.IP \fB-S\fP
-Requires the given files to exist and be sockets.
-.IP \fB-b\fP
-Requires the given files to exist and be block special files.
-.IP \fB-c\fP
-Requires the given files to exist and be character special files.
-.IP \fB-d\fP
-Requires the given files to exist and be directories.
-.IP \fB-e\fP
-Requires the given files to exist, and is redundant to any other option.
-.IP \fB-f\fP
-Requires the given files to exist and be regular files.
-.IP \fB-g\fP
-Requires the given files to exist and have their set group ID flags set.
-.IP \fB-k\fP
-Requires the given files to exist and have their sticky bit set.
-.IP \fB-p\fP
-Requires the given files to exist and be named pipes.
-.IP \fB-r\fP
-Requires the given files to exist and be readable.
-.IP \fB-u\fP
-Requires the given files to exist and have their set user ID flags set.
-.IP \fB-w\fP
-Requires the given files to exist and be writable.
-.IP \fB-x\fP
-Requires the given files to exist and be executable.
-.\"
-.SH DIAGNOSTICS
+.B -b
+requires the given files to exist and be block special files.
+.PP
+.B -c
+requires the given files to exist and be character special files.
+.PP
+.B -d
+requires the given files to exist and be directories.
+.PP
+.B -e
+requires the given files to exist, and is redundant to any other option.
+.PP
+.B -e
+requires the given files to exist and be regular files.
+.PP
+.B -g
+requires the given files to exist and have their set group ID flags set.
+.PP
+.B -k
+requires the given files to exist and have their sticky bit set.
+.PP
+.B -p
+requires the given files to exist and be named pipes.
+.PP
+.B -r
+requires the given files to exist and be readable.
+.PP
+.B -u
+requires the given files to exist and have their set user ID flags set.
+.PP
+.B -w
+requires the given files to exist and be writable.
+.PP
+.B -x
+requires the given files to exist and be executable.
+.PP
+.B -L
+requires the given files to exist and be symbolic links.
+.PP
+.B -S
+requires the given files to exist and be sockets.
 
-When invoked incorrectly, a debug message will be printed and the program will
-exit with the appropriate
-.BR sysexits.h (3)
-error code.
-.\"
-.SH RATIONALE 
+.SH EXIT STATUS
 
-The 
-.BR test (1p)
-utility contains functionality that was broken out into separate programs. Thus,
-the scope of this program is narrower than it. Notably, the
+Scrut prints a debug message and exits unsuccessfully with the appropriate
+sysexits.h(3) error code if invoked incorrectly. Scrut exits successfully if
+the given files comply with their requirements and unsuccessfully otherwise.
+
+.SH STANDARDS
+
+Scrut is nearly compatible with POSIX's test utility though it is narrower in
+scope. Notably, the
 .B -h
 option is now invalid and therefore shows usage information instead of being an
 alias to the modern
 .B -L
 option.
-.\"
+
 .SH AUTHOR
 
-Written by DTB
-.MT trinity@trinity.moe
-.ME .
-.\"
+Written by DTB <trinity@trinity.moe>.
+
 .SH COPYRIGHT
 
-Copyright \(co 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
+Copyright © 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-.\"
+
 .SH SEE ALSO
-.BR access (3p),
-.BR lstat (3p),
-.BR test (1p)
+
+access(3p), lstat(3p), test(1p)

docs/str.1

@@ -1,59 +1,58 @@
 .\" Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH STR 1 2024-06-17 "Harakit X.X.X"
+
+.TH STR 1
+
 .SH NAME
-str \(en test string arguments
-.\"
+
+str \(en test the character types of string arguments
+
 .SH SYNOPSIS
 
 str
-.B type string...
-.\"
+.RB [ type ]
+.RB [ string... ]
+
 .SH DESCRIPTION
 
-Test the character types of string arguments.
+Str tests each character in an arbitrary quantity of string arguments against
+the function of the same name within ctype(3).
 
-The tests in this program are equivalent to the functions with the same names in
-.BR ctype.h (0p)
-and are the methods by which string arguments are tested.
-.\"
 .SH DIAGNOSTICS
 
-If all tests pass, the program will exit successfully. If any of the tests fail,
-the program will exit unsuccessfully with an error code of 1.
+Str exits successfully if all tests pass and unsuccessfully if a test failed.
+.PP
+Str will exit unsuccessfully if a string is empty, as none of its contents
+passed the test.
+.PP
+Str will print a message to standard error and exit unsuccessfully if used
+improperly.
 
-When invoked incorrectly, a debug message will be printed and the program will
-exit with the appropriate
-.BR sysexits.h (3)
-error code.
-.\"
-.SH CAVEATS
+.SH DEPRECATED FEATURES
 
-None of an empty string\(cqs contents pass any of the tests, so the program will
-exit unsuccessfully if one is specified.
+Str used to have an "isvalue" type as an extension to ctype(3). This was
+removed in favor of using strcmp(1) to compare strings against the empty string
+('').
 
-There\(cqs no way of knowing which argument failed the test without re-testing
+.SH BUGS
+
+There's no way of knowing which argument failed the test without re-testing
 arguments individually.
+.PP
+If a character in a string isn't valid ASCII str will exit unsuccessfully.
 
-If a character in a string isn\(cqt valid ASCII, the program will exit
-unsuccessfully.
-.\"
 .SH AUTHOR
 
-Written by DTB
-.MT trinity@trinity.moe
-.ME .
-.\"
+Written by DTB <trinity@trinity.moe>.
+
 .SH COPYRIGHT
 
-Copyright \(co 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
+Copyright © 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/gpl.html>.
-.\"
+
 .SH SEE ALSO
-.BR ctype (3p),
-.BR strcmp(1),
-.BR ascii(7)
+
+ctype(3p), strcmp(1), ascii(7)

docs/strcmp.1

@@ -1,75 +1,62 @@
 .\" Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH STRCMP 1 2024-07-15 "Harakit X.X.X"
+
+.TH STRCMP 1
+
 .SH NAME
+
 strcmp \(en compare strings
-.\"
+
 .SH SYNOPSIS
 
 strcmp
-.B string string...
-.\"
+.RM [ string ]
+.RB [ strings... ]
+
 .SH DESCRIPTION
 
-Check whether string arguments are the same.
-.\"
+Strcmp checks whether the given strings are the same.
+Strcmp exits successfully if the strings are identical. Otherwise, strcmp exits
+with the value 1 if an earlier string has a greater byte value than a later
+string (e.g.
+.R strcmp b a
+)
+and 255 if an earlier string has a lesser byte value (e.g.
+.R strcmp a b
+).
+
 .SH DIAGNOSTICS
 
-The program will exit successfully if the strings are identical. Otherwise, it
-will exit with an error code less than 128 if a string passed has a lesser byte
-value than one of the prior strings:
+Strcmp will print an error message and exit unsuccessfully with a status
+described in sysexits(3) if used incorrectly (given less than two operands).
 
-.RS
-strcmp b a
-.RE
+.SH UNICODE
 
-or with an error code greater than 128 if it has a greater byte value than one
-of the prior strings:
+Strcmp will exit unsuccessfully if the given strings are not identical;
+Unicode strings may need to be normalized if the intent is to check visual
+similarity and not byte similarity.
 
-.RS
-strcmp a b
-.RE
-
-When invoked incorrectly, a debug message will be printed and the program will
-exit with the appropriate
-.BR sysexits.h (3)
-error code.
-.\"
-.SH CAVEATS
-
-The program will exit unsuccessfully if the given strings are not identical;
-therefore, Unicode strings may need to be normalized if the intent is to check
-visual similarity and not byte similarity.
-.\"
 .SH RATIONALE
 
 The traditional tool for string comparisons in POSIX and other Unix shells has
-been
-.BR test (1).
-This tool also handles integer comparisons and file scrutiny. These parts of its
-functionality have been broken out into multiple utilities.
+been test(1). This tool also handles integer comparisons and file scrutiny.
+These parts of its functionality have been broken out into multiple utilities.
+
+Strcmp’s functionality may be performed on a POSIX-compliant system with
+test(1p).
 
-This program\(cqs functionality may be performed on a POSIX-compliant system
-with
-.BR test (1p).
-.\"
 .SH AUTHOR
 
-Written by DTB 
-.MT trinity@trinity.moe
-.ME .
-.\"
+Written by DTB <trinity@trinity.moe>.
+
 .SH COPYRIGHT
 
-Copyright \(co 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
+Copyright © 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/gpl.html>.
-.\"
+
 .SH SEE ALSO
-.BR strcmp (3),
-.BR intcmp (1),
-.BR scrut (1),
-.BR test (1p)
+
+strcmp(3), intcmp(1), scrut(1), test(1p)

docs/swab.1

@@ -1,75 +1,71 @@
 .\" Copyright (c) 2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH SWAB 1 2024-06-17 "Harakit X.X.X"
+
+.TH swab 1
+
 .SH NAME
+
 swab \(en swap bytes
-.\"
+
 .SH SYNOPSIS
 
 swab
-.RB [ -w\ word_size ]
-.\"
-.SH DESCRIPTION
+.RB ( -f )
+.RB ( -w
+.R [
+.B word size
+.R ])
 
-Swap the latter and former halves of a block of bytes.
-.\"
-.SH OPTIONS
+.SH USAGE
+
+Swab swaps the latter and former halves of a block of bytes.
 
-.IP \fB-w\fP\ \fIword_size\fP
-Configures the word size; that is, the size in bytes of the block size on which
-to operate. The default word size is 2. The word size must be cleanly divisible
-by 2, otherwise the block of bytes being processed can\(cqt be halved.
-.\"
 .SH EXAMPLES
 
-The following
-.BR sh (1p)
-line:
+The following sh(1p) line:
 
-.RS
-printf 'hello world!\(rsn' | swab
-.RE
-.\" If you change this, make sure to change it in tests/bonsai/swab.mk too.
+.R printf 'hello world!\n' | swab
 
 Produces the following output:
 
-.RS
-ehll oowlr!d
-.RE
-.\"
+.R ehll oowlr!d
+
+.SH OPTIONS
+
+The
+.B -f
+option ignores system call interruptions.
+.PP
+The
+.B -w
+option configures the word size; that is, the size in bytes of the block size
+on which to operate. By default the word size is 2. The word size must be
+cleanly divisible by 2, otherwise the block of bytes being processed can't be
+halved.
+
 .SH DIAGNOSTICS
 
-In the event of an error, a debug message will be printed and the program will
-exit with the appropriate
-.BR sysexits.h (3)
-error code.
-.\"
+If an error is encountered in input, output, or invocation, a diagnostic
+message will be written to standard error and swab will exit with the
+appropriate status from sysexits.h(3).
+
 .SH RATIONALE
 
-This program was modeled and named after the
-.B conv=swab
-functionality specified
-in the
-.BR dd (1p)
-utility. It additionally allows the word size to be configured.
+Swab was modeled after the
+.R conv=swab
+functionality specified in the POSIX dd utility but additionally allows the
+word size to be configured.
+.PP
+Swab is useful for fixing the endianness of binary files produced on other
+machines.
 
-This functionality is useful for fixing the endianness of binary files produced
-on other machines.
-.\"
-.SH AUTHOR
-
-Written by DTB
-.MT trinity@trinity.moe
-.ME .
-.\"
 .SH COPYRIGHT
 
-Copyright \(co 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
+Copyright (c) 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-.\"
+
 .SH SEE ALSO
-.BR dd (1p)
+
+dd(1p)

docs/true.1

@@ -1,36 +1,35 @@
 .\" Copyright (c) 2022, 2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-.\"
-.TH TRUE 1 2024-06-06 "Harakit X.X.X"
+
+.TH TRUE 1
+
 .SH NAME
+
 true \(en do nothing, successfully
-.\"
+
 .SH DESCRIPTION
 
-Do nothing regardless of operands or standard input. An exit code of 0 will
-always be returned.
-.\"
+True does nothing regardless of operands or standard input.
+True will always return an exit code of 0.
+
 .SH RATIONALE
 
-In \fIPOSIX.1-2017\fP,
-.BR true (1p)
-exists for the construction of control flow and loops based on a success. This
-implementation functions as described in that standard.
-.\"
+True exists for the construction of control flow and loops based on a success.
+
+True functions as described in POSIX.1-2017.
+
 .SH AUTHOR
 
-Written by Emma Tebibyte
-.MT emma@tebibyte.media
-.ME .
-.\"
+Written by Emma Tebibyte <emma@tebibyte.media>.
+
 .SH COPYRIGHT
 
 This work is marked with CC0 1.0. To see a copy of this license, visit
 <http://creativecommons.org/publicdomain/zero/1.0>.
-.\"
+
 .SH SEE ALSO
-.BR false (1p),
-.BR true (1p)
+
+false(1p)

include/FreeBSD.mk

@@ -1,6 +0,0 @@
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.

include/OpenBSD.mk

@@ -1,13 +0,0 @@
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-OSLIB = build/o/libopenbsd.rlib
-RUSTFLAGS += --extern openbsd=$(OSLIB)
-
-$(OSLIB): src/libopenbsd.rs
-	$(RUSTC) $(RUSTFLAGS) --crate-type=lib --crate-name=openbsd \
-		-o $@ src/libopenbsd.rs

src/dj.c

@@ -1,6 +1,5 @@
 /*
  * Copyright (c) 2024 DTB <trinity@trinity.moe>
- * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
  * SPDX-License-Identifier: AGPL-3.0-or-later
  *
  * This program is free software: you can redistribute it and/or modify it under
@@ -17,422 +16,437 @@
  * along with this program. If not, see https://www.gnu.org/licenses/.
  */
 
-#include <assert.h> /* assert(3) */
+#include <ctype.h> /* isupper(3), tolower(3) */
 #include <errno.h> /* errno */
 #include <fcntl.h> /* open(2) */
-#include <stdbool.h> /* bool */
 #include <stdio.h> /* fprintf(3), stderr */
-#include <stdlib.h> /* malloc(3), strtol(3), size_t */
+#include <stdlib.h> /* free(3), malloc(3), strtol(3), size_t */
 #include <string.h> /* memcpy(3), memmove(3), memset(3) */
-#include <sysexits.h> /* EX_OK, EX_OSERR, EX_USAGE */
+#include <sysexits.h> /* EX_OK, EX_USAGE */
 #include <unistd.h> /* close(2), getopt(3), lseek(2), read(2), write(2),
-                     * pledge(2), unveil(2), optarg, optind, STDIN_FILENO,
-					 * STDOUT_FILENO */
-#include <sys/stat.h> /* S_IRGRP, S_IROTH, S_IRUSR, S_IWGRP, S_IWOTH, S_IWUSR */
-
-char *program_name = "dj";
+                     * optarg, optind, STDIN_FILENO, STDOUT_FILENO */
+extern int errno;
 
 /* dj uses two structures that respectively correspond to the reading and
  * writing ends of its jockeyed "pipe". User-configurable members are noted
  * with their relevant options. */
-struct Io {
-	char *buf;      /* buffer */
-	char *fn;       /* file name (-io) */
-	size_t bs;    	/* buffer size (-bB) */
+struct Io{
+	int bs;			/* buffer size (-bB) */
 	size_t bufuse;	/* buffer usage */
-	size_t bytes; 	/* bytes processed */
-	size_t prec;  	/* partial records processed */
-	size_t rec;   	/* records processed */
-	long seek;  	/* remaining bytes to seek/skip (-sS) */
-	int error;  	/* errno */
-	int fd;         /* file descriptor */
-	int fl;         /* file opening flags */
-};
+	char *buf;		/* buffer */
+	int bytes;		/* bytes processed */
+	int fd;			/* file descriptor */
+	int fl;			/* file opening flags */
+	char *fn;		/* file name (may be stdin_name or stdout_name) (-io) */
+	int prec;		/* partial records processed */
+	int rec;		/* records processed */
+	long seek;		/* bytes to seek/skip (will be 0 after skippage) (-sS) */
+} ep[2]; /* "engineered pipe"; also "extended play", for the deejay */
 
+/* Additionally, the following global variables are used to store user options.
+ */
+
+/* (-a)  */ static int align; /* Only the lower 8b are used but align is
+                               * negative if no alignment is being done. */
+
+/* (-c)  */ static int count; /* 0 if dj(1) runs until no more reads are
+                               * possible. */
+
+/* ASCII field separator delimited statistics */
+            static char *fmt_asv   = "%d\037%d\036%d\037%d\035%d\036%d\034";
+/* human-readable statistics */
+            static char *fmt_human = "%d+%d > %d+%d; %d > %d\n";
+/* pointer to chosen formatting */
+/* (-H)  */ static char *fmt_output; /* fmt_asv (default) or fmt_human (-H) */
+
+/* (-dq) */ static char debug;       /*
+ *  -d  increments             dj -qq | 0 - no diagnostic output whatsoever
+ *   -q decrements             dj -q  | 1 - typical output without
+ *                                    |     notifications on partial reads or
+ *                                    |     writes
+ *                             dj     | 2 - typical output (default)
+ *                             dj -d  | 3 - verbose status messages */
+
+/* (-n)  */ static char noerror;     /* 0 - exits on partial reads or writes
+                                      *     (default)
+                                      * 1 - retries on partial reads/writes
+                                      *     (-n) */
+
+/* Non-configurable defaults. */
+#define bs_default 1024 /* GNU dd(1) default; twice POSIX but a neat 2^10 */
+static char *program_name = "<no argv[0]>";
 static char *stdin_name = "<stdin>";
 static char *stdout_name = "<stdout>";
+static int read_flags = O_RDONLY; /* These flags are consistent with Busybox */
+static int write_flags = O_WRONLY | O_CREAT; /* dd(1). */
 
-static int creat_mode = S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH
-	| S_IWOTH; /* Consistent with touch(1p). */
-static int read_flags = O_RDONLY; /* Consistent with Busybox dd(1). */
-static int write_flags = O_WRONLY | O_CREAT;
+/* Macro to set defaults for user-configurable options. */
+#define setdefaults do{ \
+	align = -1; \
+	count = 0; \
+	debug = 2; \
+	fmt_output = fmt_asv; \
+	noerror = 0; \
+	ep[0].fl = read_flags; \
+	Io_setdefaults(&ep[0]); \
+	ep[1].fl = write_flags; \
+	Io_setdefaults(&ep[1]); }while(0)
 
 #define MIN(a, b) (((a) < (b)) ? (a) : (b))
 
-/* Macro to check if fd is stdin or stdout */
-#define fdisstd(fd) ((fd) == STDIN_FILENO || (fd) == STDOUT_FILENO)
+/* Macro to check if fd is a std* file, e.g. stdin. */
+#define fdisstd(fd) \
+		((fd) == STDIN_FILENO \
+		|| (fd) == STDOUT_FILENO \
+		|| (fd) == STDERR_FILENO)
 
-/* Completes one Io block read */
+/* Macro to call the cleanup functions that operate on struct io on the
+ * particular io[2] used in main. Error conditions are not checked because this
+ * is only used when the program is about to terminate (hence its name). */
+#define terminate(io) do{ \
+	Io_buffree(&(io)[0]); \
+	Io_buffree(&(io)[1]); \
+	Io_fdclose(&(io)[0]); \
+	Io_fdclose(&(io)[1]); }while(0)
+
+/* Allocates *io's buffer. Returns NULL if unsuccessful. */
+static void *
+Io_bufalloc(struct Io *io){
+
+	return (io->buf = malloc(io->bs * (sizeof *io->buf)));
+}
+
+/* Frees *io's buffer. Returns io. */
 static struct Io *
-Io_read(struct Io *io) {
-	int t;
+Io_buffree(struct Io *io){
 
-	assert(io->bs > 0);
-	assert(io->bufuse < io->bs);
-
-	if ((t = read(io->fd, &(io->buf)[io->bufuse], io->bs - io->bufuse)) < 0) {
-		io->error = errno;
-		t = 0;
-	}
-
-	io->bufuse += t;
-	io->bytes  += t;
-	io->prec   += (0 < io->bufuse && io->bufuse < io->bs);
-	io->rec    += (io->bufuse == io->bs);
-
-	assert(io->bufuse <= io->bs);
+	free(io->buf);
 
 	return io;
 }
 
-/* Completes one Io block write */
+/* Fills the unused portion of io's buffer with padding, updating io->bufuse.
+ * Returns io. */
 static struct Io *
-Io_write(struct Io *io) {
-	int t;
-
-	assert(io->bufuse > 0);
-	assert(io->bufuse <= io->bs);
-
-	if ((t = write(io->fd, io->buf, io->bufuse)) < 0) {
-		io->error = errno;
-		t = 0;
-	} else if (t > 0) {
-		(void)memmove(io->buf, &(io->buf)[t], (io->bufuse -= t));
-	}
-
-	io->bytes += t;
-	io->prec  += (t > 0 && io->bufuse > 0);
-	io->rec   += (t > 0 && io->bufuse == 0);
+Io_bufrpad(struct Io *io, int padding){
+	
+	memset(io->buf + io->bufuse, padding, io->bs - io->bufuse);
+	io->bufuse = io->bs;
 
 	return io;
 }
 
+/* Copies from the buffer in src as much as possible to the free space in the
+ * dest buffer, removing the copied units from src and permuting the remaining
+ * units in the src buffer to the start of the buffer, modifying both the src
+ * and dest bufuse and returning dest. */
+static struct Io*
+Io_bufxapp(struct Io *dest, struct Io *src){
+	int n;
+
+	n = MIN(src->bufuse, dest->bs - dest->bufuse);
+	memcpy(dest->buf + dest->bufuse, src->buf, n);
+	dest->bufuse += n;
+	memmove(src->buf, src->buf + n, src->bs - n);
+	src->bufuse -= n;
+
+	return dest;
+}
+
+/* Copies from the buffer in src to the buffer in dest no more than n units,
+ * removing the copied units from src and permuting the remaining units in the
+ * src buffer to the start of the buffer, modifying both the src and dest
+ * bufuse and returning dest. */
+static struct Io*
+Io_bufxfer(struct Io *dest, struct Io *src, int n){
+
+	memcpy(dest->buf, src->buf, (dest->bufuse = n));
+	memmove(src->buf, src->buf + n, (src->bufuse -= n));
+
+	return dest;
+}
+
+/* Closes io->fn and returns -1 on error, otherwise io->fd. */
 static int
-oserr(char *e, int n) { /* program_name: [failing component:] error */
-	(void)fprintf(stderr, "%s: ", program_name);
-	if (e != NULL) { (void)fprintf(stderr, "%s: ", e); }
-	(void)fprintf(stderr, "%s\n", strerror(n));
+Io_fdclose(struct Io *io){
+
+	return fdisstd(io->fd)
+		? 0
+		: close(io->fd);
+}
+
+/* Opens io->fn and saves the file descriptor into io->fd. Returns io->fd,
+ * which will be -1 if an error occured. */
+static int
+Io_fdopen(struct Io *io, char *fn){
+	int fd;
+	
+	if((fd = open(fn, io->fl,
+					/* these are the flags used by touch(1p) */
+					S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH))
+				!= -1
+			&& Io_fdclose(io) == 0){
+		io->fd = fd;
+		io->fn = fn;
+	}
+
+	return fd;
+}
+
+/* Seeks io->seek bytes through *io's file descriptor, (counter-intuitively)
+ * returning -1 if successful and a sysexits.h exit code if an unrecoverable
+ * error occurred. io->buf will be cleared of useful bytes and io->seek will
+ * be set to zero to indicate the seek occurred. */
+static int
+Io_fdseek(struct Io *io){
+	int (*op)(int, void *, size_t);
+	
+	if(!fdisstd(io->fd) && lseek(io->fd, io->seek, SEEK_SET) != -1)
+		return -1;
+
+	/* repeated code to get the condition out of the loop */
+	if(io->fl == write_flags){
+		memset(io->buf, '\0', io->bs);
+		/* We're going to cheat and use bufuse as the retval for write(2),
+		 * which is fine because it'll be zeroed as this function returns
+		 * anyway. */
+		do{
+			if((io->bufuse = write(io->fd, io->buf, MIN(io->bs, io->seek)))
+					== 0)
+				/* second chance */
+				io->bufuse = write(io->fd, io->buf, MIN(io->bs, io->seek));
+		}while((io->seek -= io->bufuse) > 0 && io->bufuse != 0);
+	}else if(io->fl == read_flags){
+		do{
+			if((io->bufuse = read(io->fd, io->buf, MIN(io->bs, io->seek)))
+					== 0)
+				/* second chance */
+				io->bufuse = read(io->fd, io->buf, MIN(io->bs, io->seek));
+		}while((io->seek -= io->bufuse) > 0 && io->bufuse != 0);
+	}else
+		return EX_SOFTWARE;
+
+	io->bufuse = 0;
+
+	return -1;
+}
+
+/* Reads io->bs bytes from *io's file descriptor into io->buf, storing the
+ * number of read bytes in io->bufuse and updating io->bytes. If io->bufuse is
+ * 0, errno will probably be set. Returns io. */
+static struct Io *
+Io_read(struct Io *io){
+
+	io->bytes += (io->bufuse = read(io->fd, io->buf, io->bs));
+
+	return io;
+}
+
+/* Sets the variables in a struct *io to the defaults. Identifies the read/
+ * write ends of the "pipe" by checking io->fl. Returns io. */
+static struct Io *
+Io_setdefaults(struct Io *io){
+
+	io->bs = bs_default;
+	io->buf = NULL;
+	io->bytes = 0;
+	io->fd = (io->fl == read_flags) ? STDIN_FILENO : STDOUT_FILENO;
+	io->fn = (io->fl == read_flags) ? stdin_name   : stdout_name;
+	io->prec = 0;
+	io->rec = 0;
+	io->seek = 0;
+
+	return io;
+}
+
+/* Writes io->bufuse units from io->buf to io->fd, permuting any unwritten
+ * bytes to the start of io->buf and updating io->bufuse. If io->bufuse doesn't
+ * change, errno will probably be set. Returns io. */
+static struct Io *
+Io_write(struct Io *io){
+	int t;
+
+	if((t = write(io->fd, io->buf, io->bufuse)) > 0)
+		memmove(io->buf, io->buf + t, (io->bufuse -= t));
+	io->bytes += t;
+
+	return io;
+}
+
+/* Prints an error message suitable for the event of an operating system error,
+ * with the error itself to be described in the string s. */
+static int
+oserr(char *s){
+
+	fprintf(stderr, "%s: %s: %s\n", program_name, s, strerror(errno));
 
 	return EX_OSERR;
 }
 
 /* Prints statistics regarding the use of dj, particularly partially and
- * completely read and written records. */
-static int
-fprintio(FILE *stream, char *fmt, struct Io io[2]) {
-	return fprintf(
-		stream,
-		fmt,
-		io[0].rec,
-		io[0].prec,
-		io[1].rec,
-		io[1].prec,
-		io[0].bytes,
-		io[1].bytes
-	);
-}
+ * completely read and written records, accessing debug, ep, and fmt_output. */
+static void
+output(void){
 
-/* To be assigned to main:fmt and used with printio(). */
-static char *fmt_asv =
-	"%d" /* io[0].rec   */ "\037" /* ASCII US */
-	"%d" /* io[0].prec  */ "\036" /* ASCII RS */
-	"%d" /* io[1].rec   */ "\037" /* ASCII US */
-	"%d" /* io[1].prec  */ "\035" /* ASCII GS */
-	"%d" /* io[0].bytes */ "\036" /* ASCII RS */
-	"%d" /* io[1].bytes */ "\034" /* ASCII FS */
-	"\n"
-;
-static char *fmt_human = "%d+%d > %d+%d; %d > %d\n";
+	if(debug >= 1)
+		fprintf(stderr, fmt_output,
+			ep[0].rec, ep[0].prec, ep[1].rec, ep[1].prec,
+			ep[0].bytes, ep[1].bytes);
+
+	return;
+}
 
 /* Parses the string s to an integer, returning either the integer or in the
  * case of an error a negative integer. This is used for argument parsing
  * (e.g. -B [int]) in dj and no negative integer would be valid anyway. */
 static long
-parse(char *s) {
+parse(char *s){
 	long r;
 
 	errno = 0;
 	r = strtol(s, &s, 0);
-	return (*s == '\0' /* no chars left unparsed */ && errno == 0) ? r : -1;
+	return (*s == '\0' /* no chars left unparsed */ && errno == 0)
+		? r
+		: -1;
 }
 
 static int
-usage(char *argv0) {
-	(void)fprintf(
-		stderr,
-		"Usage: %s [-Hn] [-a byte] [-c count]\n"
-		"\t[-i file] [-b block_size] [-s offset]\n"
-		"\t[-o file] [-B block_size] [-S offset]\n",
-		argv0
-	);
+usage(void){
+
+	fprintf(stderr, "Usage: %s (-AdfHqQ) (-a [byte]) (-c [count])\n"
+		"\t(-i [input file]) (-b [input block size]) (-s [input offset])\n"
+		"\t(-o [output file]) (-B [output block size]) (-S [output offset])\n",
+		program_name);
 
 	return EX_USAGE;
 }
 
-int main(int argc, char *argv[]) {
-   	int align;    /* low 8b used, negative if no alignment is being done */
-	int count;    /* -1 if dj(1) runs until no more reads are possible */
-	char *fmt;    /* set to fmt_asv (default) or fmt_human (-H) */
-	size_t i;     /* side of io (in or out) being modified */
-	bool retry;   /* false if exits on partial reads or writes */
-	struct Io io[2 /* { in, out } */];
+int main(int argc, char *argv[]){
+	int c;
+	int i;
 
-#ifdef __OpenBSD__
-	if (pledge("cpath rpath stdio unveil wpath", NULL) == -1) {
-		return oserr(NULL, errno);
-	}
-#endif
-
-	/* Set defaults. */
-	align = -1;
-	count = -1;
-	fmt = fmt_asv;
-	retry = 0;
-	for (i = 0; i < (sizeof io) / (sizeof *io); ++i) {
-		io[i].bs = 1024 /* 1 KiB */; /* GNU dd(1) default; POSIX says 512B */
-		io[i].bufuse = 0;
-		io[i].bytes = 0;
-		io[i].fd = i == 0 ? STDIN_FILENO : STDOUT_FILENO;
-		io[i].fn = i == 0 ? stdin_name   : stdout_name;
-		io[i].fl = i == 0 ? read_flags   : write_flags;
-		io[i].error = 0;
-		io[i].prec = 0;
-		io[i].rec = 0;
-		io[i].seek = 0;
-	}
-
-	if (argc > 0) {
-		int c;
+	setdefaults;
 
+	if(argc > 0){
 		program_name = argv[0];
-		while ((c = getopt(argc, argv, "a:b:B:c:i:hHns:S:o:")) != -1) {
-			switch (c) {
-				case 'i': case 'o': /* input, output */
-					i = (c == 'o');
-
-					/* optarg == "-" (stdin/stdout) */
-					if (optarg[0] == '-' && optarg[1] == '\0') { 
-						io[i].fd = i == 0 ? STDIN_FILENO : STDOUT_FILENO;
-						io[i].fn = i == 0 ? stdin_name   : stdout_name;
-						break;
-					} else {
-						int fd;
-
-#ifdef __OpenBSD__
-						if (unveil(optarg, i == 0 ? "r" : "wc") == -1) {
-							return oserr(NULL, errno);
-						}
-#endif
-
-						if (
-							(fd = open(optarg, io[i].fl, creat_mode)) != -1
-							&& (fdisstd(io[i].fd) || close(io[i].fd) == 0)
-						) {
-							io[i].fd = fd;
-							io[i].fn = optarg;
-							break;
-						}
-					}
-
-					return oserr(optarg, errno);
-					/* UNREACHABLE */
-				case 'n': retry = 1; break; /* retry failed reads once */
-				case 'H': fmt = fmt_human; break; /* human-readable output */
-				case 'a': /* input buffer padding */
-					if (optarg[0] == '\0' || optarg[1] == '\0') {
-						align = optarg[0];
-						break;
-					}
-					/* FALLTHROUGH */
-				case 'c': /* number of reads */
-				case 'b': case 'B': /* input/output block size */
-				case 's': case 'S': /* (s)kip/(S)eek in input/output */
-					if (c == 'c' && (count = parse(optarg)) >= 0) { break; }
-
-					i = (c >= 'A' && c <= 'Z');
-					c |= 0x20; /* 0b 0010 0000 (ASCII) make lowercase */
-
-					if ( /* if -b or -s is parsed out correctly */
-						(c == 'b' && (io[i].bs = parse(optarg)) > 0)
-						|| (c == 's' && (io[i].seek = parse(optarg)) >= 0)
-					) { break; } /* don't error */
-
-					/* FALLTHROUGH */
-				default:
-					return usage(program_name);
-			}
-		}
-	}
-
-#ifdef __OpenBSD__
-	if (unveil(NULL, NULL) == -1) { return oserr(NULL, errno); }
-#endif
-
-	assert(io->fd != STDIN_FILENO  || io->fl == read_flags);
-	assert(io->fd != STDOUT_FILENO || io->fl == write_flags);
-
-	if (argc > optind) { return usage(program_name); }
-
-	for (i = 0; i < (sizeof io) / (sizeof *io); ++i) {
-		/* buffer allocation */
-		if ((io[i].buf = malloc(io[i].bs * (sizeof *(io[i].buf)))) == NULL) {
-			(void)fprintf(
-				stderr, "%s: Failed to allocate %zd bytes\n",
-				program_name, io[i].bs
-			);
-			return EX_OSERR;
-		}
-
-		/* easy seeking */
-		if (!fdisstd(io[i].fd) && lseek(io[i].fd, io[i].seek, SEEK_SET) != -1) {
-			io[i].seek = 0;
-		}
-	}
-
-	assert(io[1].bufuse == 0); /* requirement for hard seeking */
-
-	/* hard seeking; t is io[1].bufuse, before Io_write subtracts from it */
-	for(size_t t; io[1].seek > 0; io[1].seek -= (t - io[1].bufuse)) {
-		(void)memset(
-			io[1].buf, '\0', /* set buf to all nulls */
-			(t = io[1].bufuse = MIN(io[1].bs, io[1].seek)) /* saturate block */
-		);
-
-		if (Io_write(&io[1])->bufuse == t && !retry && io[1].error == 0) {
-			(void)Io_write(&io[1]); /* second chance */
-		}
-
-		if (io[1].error != 0) { return oserr(io[1].fn, io[1].error); }
-
-		if (io[1].bufuse == t) { break; } /* all writes failed! */
-	}
-
-	io[1].bufuse = 0; /* reset after hard seek */
-
-	if (io[1].seek > 0) { /* hard seeking failed */
-		(void)fprintio(stderr, fmt, io);
-		return oserr(io[1].fn, errno);
-	}
-
-	for (	;
-			count == -1 || count > 0;
-			count -= (count != -1) /* decrement if counting */
-	) {
-		assert(io[0].bufuse == 0);
-
-		{ /* read */
-			long skipping;
-			size_t t;
-
-			/* hack to intentionally get a partial read from Io_read */
-			if ((skipping = MIN(io[0].seek, io[0].bs)) > 0) {
-				io[0].bufuse = io[0].bs - (size_t)skipping;
-			}
-
-			t = io[0].bufuse;
-			if (Io_read(&io[0])->bufuse == t && !retry && io[0].error == 0) {
-				(void)Io_read(&io[0]); /* second chance */
-			}
-
-			assert(io[0].bufuse >= t);
-
-			if (io[0].bufuse == t) { break; } /* that's all she wrote */
-
-			if (/* t < io[0].bufuse && */ io[0].bufuse < io[0].bs) {
-				(void)fprintf(stderr, "%s: Partial read:\n\t", program_name);
-				(void)fprintio(stderr, fmt, io);
-
-				if (!retry) { count = 1; }
-
-				if (align >= 0) {
-					/* fill the rest of the ibuf with padding */
-					(void)memset(
-						&(io[0].buf)[io[0].bufuse],
-						align,
-						io[0].bs - io[0].bufuse
-					);
-
-					io->bufuse = io->bs;
-				}
-			}
-
-			if (skipping > 0) {
-				io[0].seek -= skipping;
-				io[0].bufuse = 0;
-				count += (count != -1); /* increment if counting */
-				continue;
-			}
-		}
-
-		assert(io[0].bufuse > 0);
-
-		while (io[0].bufuse > 0) { /* write */
-			if (io[0].bs <= io[1].bs) {
-				int n;
-
-				(void)memcpy( /* saturate obuf */
-					io[1].buf, io[0].buf,
-				   (io[1].bufuse = (n = MIN(io[0].bufuse, io[1].bs)))
-				);
-
-				/* permute the copied units out of ibuf */
-				(void)memmove(io[0].buf, &(io[0].buf)[n], (io[0].bufuse -= n));
-			} else /* if(io[0].bs > io[1].bs) */ {
-				int n;
-
-				/* drain what we can from ibuf */
-				(void)memcpy(
-					&(io[1].buf)[io[1].bufuse], io[0].buf,
-				    (n = MIN(io[0].bufuse, io[1].bs - io[1].bufuse))
-				);
-				io[1].bufuse += n;
-
-				/* permute out the copied units */
-				(void)memmove(io[0].buf, &(io[0].buf)[n], io[0].bs - n);
-				io[0].bufuse -= n;
-
-				if(io[0].bs + io[1].bufuse <= io[1].bs && count != 1) {
-					continue; /* obuf not saturated - we could write more */
-				}
-			}
-
-			{ /* writes actually happen, or die */
-				size_t t;
-
-				t = io[1].bufuse;
-				if (Io_write(&io[1])->bufuse == t
-						&& !retry
-						&& io[1].error == 0) {
-					(void)Io_write(&io[1]); /* second chance */
-				}
-
-				assert(io[1].error == 0 || io[1].bufuse == t);
-				/* if the Io_writes errored, bufuse wouldn't have changed, and
-				 * the error will be reported at the end of the read/write
-				 * loop */
-
-				assert(io[1].bufuse <= t);
-
-				if (io[1].bufuse == t) { /* no more love */
-					count = 1;
+		while((c = getopt(argc, argv, "a:Ab:B:c:di:hHnqs:S:o:")) != -1)
+			switch(c){
+			case 'i': case 'o':
+				i = (c == 'o');
+				if(optarg[0] == '-' && optarg[1] == '\0'){ /* optarg == "-" */
+					ep[i].fd = (i == 0) ? STDIN_FILENO : STDOUT_FILENO;
+					ep[i].fn = (i == 0) ? stdin_name   : stdout_name;
+					break;
+				}else if(Io_fdopen(&ep[i], optarg) != -1)
+					break;
+				terminate(ep);
+				return oserr(optarg);
+			case 'A': align = '\0'; break;
+			case 'd': ++debug; break;
+			case 'n': noerror = 1; break;
+			case 'H': fmt_output = fmt_human; break;
+			case 'q': --debug; break;
+			case 'a':
+				if(optarg[0] != '\0' && optarg[1] == '\0'){
+					align = optarg[0];
 					break;
 				}
+				/* FALLTHROUGH */
+			case 'c': case 'b': case 's': case 'B': case 'S':
+				if(c == 'c' && (count = parse(optarg)) >= 0)
+					break;
+				i = isupper(c);
+				c = tolower(c);
+				if((c == 'b' && (ep[i].bs = parse(optarg)) > 0)
+						|| (c == 's' && (ep[i].seek = parse(optarg)) >= 0))
+					break;
+				/* FALLTHROUGH */
+			default:
+				terminate(ep);
+				return usage();
 			}
-
-			if (0 < io[1].bufuse /* && io[1].bufuse < t */) {
-				(void)fprintf(stderr, "%s: Partial write:\n\t", program_name);
-				(void)fprintio(stderr, fmt, io);
-
-				if(!retry) { count = 1; }
-			}
-		}
 	}
 
-	(void)fprintio(stderr, fmt, io);
+	if(debug >= 3)
+		fprintf(stderr,
+			"argv0=%s\n"
+			"in=%s\tibs=%d\tskip=%ld\talign=%hhx\tcount=%d\n"
+			"out=%s\tobs=%d\tseek=%ld\tdebug=%2d\tnoerror=%d\n",
+			program_name,
+			ep[0].fn, ep[0].bs, ep[0].seek, align, count,
+			ep[1].fn, ep[1].bs, ep[1].seek, debug, noerror);
 
-	for (i = 0; i < (sizeof io) / (sizeof *io); ++i) {
-		if (io[i].error) { return oserr(io[i].fn, io[i].error); }
+	if(argc > optind){
+		terminate(ep);
+		return usage();
 	}
 
+	for(i = 0; i <= 1; ++i){
+		if(Io_bufalloc(&ep[i]) == NULL){
+			fprintf(stderr, "%s: Failed to allocate %d bytes\n",
+				program_name, ep[i].bs);
+			terminate(ep);
+			return EX_OSERR;
+		}else if(ep[i].seek > 0)
+			switch(Io_fdseek(&ep[i])){
+			case EX_OK:
+				output();
+				terminate(ep);
+				return EX_OK;
+			}
+	}
+
+	do{	/* read */
+		Io_read(&ep[0]);
+		if(!noerror && ep[0].bufuse == 0)
+			Io_read(&ep[0]); /* second chance */
+		if(ep[0].bufuse == 0) /* that's all she wrote */
+			break;
+		else if(ep[0].bufuse < ep[0].bs){
+			++ep[0].prec;
+			if(debug >= 2){
+				fprintf(stderr, "%s: Partial read:\n\t", program_name);
+				output();
+			}
+			if(!noerror)
+				count = 1;
+			if(align >= 0)
+				Io_bufrpad(&ep[0], align);
+		}else
+			++ep[0].rec;
+
+		/* write */
+		do{	if(ep[1].bs > ep[0].bs){ /* io[1].bs > io[0].bs */
+				Io_bufxapp(&ep[1], &ep[0]);
+				if(ep[0].bs + ep[1].bufuse <= ep[1].bs && count != 1)
+					continue; /* we could write more */
+			}else
+				Io_bufxfer(&ep[1], &ep[0], MIN(ep[0].bufuse, ep[1].bs));
+
+			c = ep[1].bufuse;
+			Io_write(&ep[1]);
+			if(!noerror && ep[1].bufuse == c)
+				Io_write(&ep[1]); /* second chance */
+			if(c == ep[1].bufuse){ /* no more love */
+				count = 1;
+				break;
+			}else if(c > ep[1].bufuse && ep[1].bufuse > 0){
+				ep[1].prec += 1;
+				if(debug >= 2){
+					fprintf(stderr, "%s: Partial write:\n\t", program_name);
+					output();
+				}
+				if(!noerror)
+					count = 1;
+			}else if(ep[1].bufuse == 0 && c < ep[1].bs)
+				++ep[1].prec;
+			else
+				++ep[1].rec;
+		}while(ep[0].bufuse > 0);
+	}while(count == 0 || --count > 0);
+
+	output();
+	terminate(ep);
+
 	return EX_OK;
 }

src/false.c

@@ -1,19 +1,9 @@
 /*
- * Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
- * Copyright (c) 2024 DTB <trinity@trinity.moe>
+ * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
  * SPDX-License-Identifier: CC0
  *
  * This work is marked with CC0 1.0. To view a copy of this license, visit
  * <http://creativecommons.org/publicdomain/zero/1.0>.
  */
 
-#ifdef __OpenBSD__
-#	include <unistd.h> /* pledge(2) */
-#endif
-
-int main(void) {
-#ifdef __OpenBSD__
-	pledge(NULL, NULL);
-#endif
-	return 1;
-}
+int main() { return 1; }

src/fop.rs

@@ -26,90 +26,61 @@ extern crate getopt;
 extern crate strerror;
 extern crate sysexits;
 
-use getopt::GetOpt;
+use getopt::{ Opt, Parser };
 use strerror::StrError;
 use sysexits::{ EX_DATAERR, EX_IOERR, EX_UNAVAILABLE, EX_USAGE };
 
-#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
-#[cfg(target_os="openbsd")] extern crate openbsd;
-#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
-
 fn main() {
 	let argv = args().collect::<Vec<String>>();
-	let mut d = '\u{1E}'.to_string(); /* ASCII record separator */
-	let mut optind = 1;
+	let mut d = '␞';
+	let mut arg_parser = Parser::new(&argv, "d:");
 
-	#[cfg(target_os="openbsd")] {
-		let promises = Promises::new("stdio proc exec");
-		if let Err(e) = pledge(Some(promises), None) {
-			eprintln!("{}: {}", argv[0], e.strerror());
-			exit(EX_OSERR);
-		}
-	}
-
-	let usage = format!(
-		"Usage: {} [-d delimiter] index command [args...]",
-		argv[0],
-	);
-
-	while let Some(opt) = argv.getopt("d:") {
-		match opt.opt() {
-			Ok("d") => {
-				/* delimiter */
-				d = opt.arg().unwrap();
-				optind = opt.ind();
+	while let Some(opt) = arg_parser.next() {
+		match opt {
+			Ok(Opt('d', Some(arg))) => {
+				let arg_char = arg.chars().collect::<Vec<char>>();
+				if arg_char.len() > 1 {
+					eprintln!("{}: {}: Not a character.", argv[0], arg);
+					exit(EX_USAGE);
+				} else { d = arg_char[0]; }
 			},
-			_ => {
-				eprintln!("{}", usage);
-				exit(EX_USAGE);
-			}
+			_ => {},
 		};
 	}
 
-	/* parse the specified index as a number we can use */
-	let index = argv[optind].parse::<usize>().unwrap_or_else(|e| {
+	let index_arg = arg_parser.index();
+	let command_arg = arg_parser.index() + 1;
+
+	argv.get(command_arg).unwrap_or_else(|| {
+		eprintln!("Usage: {} [-d delimiter] index command [args...]", argv[0]);
+		exit(EX_USAGE);
+	});
+
+	let index = argv[index_arg].parse::<usize>().unwrap_or_else(|e| {
 		eprintln!("{}: {}: {}", argv[0], argv[1], e);
 		exit(EX_DATAERR);
 	});
 
-	/* index of the argv[0] for the operator command */
-	let command_arg = optind as usize + 1;
-
-	/* argv[0] of the operator command */
-	let operator = argv.get(command_arg).unwrap_or_else(|| {
-		eprintln!("{}", usage);
-		exit(EX_USAGE);
-	});
-
-	/* read entire standard input into memory */
 	let mut buf = String::new();
-	if let Err(e) = stdin().read_to_string(&mut buf) {
-		eprintln!("{}: {}", argv[0], e.strerror());
-		exit(EX_IOERR);
-	};
+	let _ = stdin().read_to_string(&mut buf);
+	let mut fields = buf.split(d).collect::<Vec<&str>>();
 
-	/* split the buffer by the delimiter (by default, '\u{1E}') */
-	let mut fields = buf.split(&d).collect::<Vec<&str>>();
-
-	/* collect arguments for the operator command */
-	let command_args = argv
+	let opts = argv
 		.iter()
 		.clone()
-		.skip(command_arg + 1) /* skip the command name */
+		.skip(command_arg + 1)
 		.collect::<Vec<&String>>();
 
-	/* spawn the command to operate on the field */
-	let mut spawned = Command::new(operator)
-		.args(command_args) /* spawn with the specified arguments */
+	let mut spawned = Command::new(argv.get(command_arg).unwrap())
+		.args(opts)
 		.stdin(Stdio::piped())
-		.stdout(Stdio::piped()) /* piped stdout to handle output ourselves */
+		.stdout(Stdio::piped())
 		.spawn()
 		.unwrap_or_else( |e| {
 			eprintln!("{}: {}: {}", argv[0], argv[command_arg], e.strerror());
 			exit(EX_UNAVAILABLE);
 		});
 
-	/* get field we want to pipe into spawned program */
 	let field = fields.get(index).unwrap_or_else(|| {
 		eprintln!(
 			"{}: {}: No such index in input",
@@ -119,10 +90,9 @@ fn main() {
 		exit(EX_DATAERR);
 	});
 
-	/* get the stdin of the newly spawned program and feed it the field val */
 	if let Some(mut child_stdin) = spawned.stdin.take() {
 		let _ = child_stdin.write_all(field.as_bytes());
-		drop(child_stdin); /* stay safe! drop your children! */
+		drop(child_stdin);
 	}
 
 	let output = spawned.wait_with_output().unwrap_or_else(|e| {
@@ -130,27 +100,17 @@ fn main() {
 		exit(EX_IOERR);
 	});
 
-	/* get the output with which the original field will be replaced */
 	let mut replace = output.stdout.clone();
 
-	/* pop trailing newline out if the input did not contain it */
-	if fields[index].chars().last() != Some('\n') /* no newline */
-		&& replace.pop() != Some(b'\n') { /* pop last char of replacement */
-		/* restore replacement to original command output if popped char was not
-		 * a newline */
-		replace = output.stdout;
-	}
+	if replace.pop() != Some(b'\n') { replace = output.stdout; }
 
-	/* convert the output of the program to UTF-8 */
 	let new_field = String::from_utf8(replace).unwrap_or_else(|e| {
 		eprintln!("{}: {}: {}", argv[0], argv[command_arg], e);
 		exit(EX_IOERR);
 	});
 
-	/* store the new field in the old fields vector */
 	fields[index] = &new_field;
 
-	/* fop it */ 
 	stdout().write_all(
 		fields.join(&d.to_string()).as_bytes()
 	).unwrap_or_else(|e| {

src/getopt-rs/error.rs

@@ -0,0 +1,95 @@
+/*
+ * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and permission
+ * notice:
+ *     The Clear BSD License
+ *
+ *     Copyright © 2017-2023 David Wildasin
+ *     All rights reserved.
+ *
+ *     Redistribution and use in source and binary forms, with or without
+ *     modification, are permitted (subject to the limitations in the disclaimer
+ *     below) provided that the following conditions are met:
+ *
+ *          * Redistributions of source code must retain the above copyright
+ *          notice, this list of conditions, and the following disclaimer.
+ *
+ *          * Redistributions in binary form must reproduce the above copyright
+ *          notice, this list of conditions, and the following disclaimer in the
+ *          documentation and/or other materials provided with the distribution.
+ *
+ *          * Neither the name of the copyright holder nor the names of its
+ *          contributors may be used to endorse or promote products derived from
+ *          this software without specific prior written permission.
+ *
+ *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
+ *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+ *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+use std::{ error, fmt };
+
+use crate::ErrorKind::{ self, * };
+
+/// A basic error type for [`Parser`](struct.Parser.html)
+#[derive(Debug, Eq, PartialEq)]
+pub struct Error {
+    culprit: char,
+    kind: ErrorKind,
+}
+
+impl Error {
+    /// Creates a new error using a known kind and the character that caused the
+	/// issue.
+    pub fn new(kind: ErrorKind, culprit: char) -> Self {
+        Self { culprit, kind }
+    }
+
+    /// Returns the [`ErrorKind`](enum.ErrorKind.html) for this error.
+    pub fn kind(self) -> ErrorKind {
+        self.kind
+    }
+}
+
+impl fmt::Display for Error {
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        match self.kind {
+            MissingArgument => write!(
+				f, 
+				"option requires an argument -- {:?}",
+				self.culprit,
+			),
+            UnknownOption => write!(f, "unknown option -- {:?}", self.culprit),
+        }
+    }
+}
+
+impl error::Error for Error {
+    fn source(&self) -> Option<&(dyn error::Error + 'static)> {
+        None
+    }
+}

src/getopt-rs/errorkind.rs

@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and permission
+ * notice:
+ *     The Clear BSD License
+ *
+ *     Copyright © 2017-2023 David Wildasin
+ *     All rights reserved.
+ *
+ *     Redistribution and use in source and binary forms, with or without
+ *     modification, are permitted (subject to the limitations in the disclaimer
+ *     below) provided that the following conditions are met:
+ *
+ *          * Redistributions of source code must retain the above copyright
+ *          notice, this list of conditions, and the following disclaimer.
+ *
+ *          * Redistributions in binary form must reproduce the above copyright
+ *          notice, this list of conditions, and the following disclaimer in the
+ *          documentation and/or other materials provided with the distribution.
+ *
+ *          * Neither the name of the copyright holder nor the names of its
+ *          contributors may be used to endorse or promote products derived from
+ *          this software without specific prior written permission.
+ *
+ *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
+ *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+ *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/// What kinds of errors [`Parser`](struct.Parser.html) can return.
+#[derive(Debug, Eq, PartialEq)]
+pub enum ErrorKind {
+    /// An argument was not found for an option that was expecting one.
+    MissingArgument,
+    /// An unknown option character was encountered.
+    UnknownOption,
+}

src/getopt-rs/lib.rs

@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and permission
+ * notice:
+ *     The Clear BSD License
+ *
+ *     Copyright © 2017-2023 David Wildasin
+ *     All rights reserved.
+ *
+ *     Redistribution and use in source and binary forms, with or without
+ *     modification, are permitted (subject to the limitations in the disclaimer
+ *     below) provided that the following conditions are met:
+ *
+ *          * Redistributions of source code must retain the above copyright
+ *          notice, this list of conditions, and the following disclaimer.
+ *
+ *          * Redistributions in binary form must reproduce the above copyright
+ *          notice, this list of conditions, and the following disclaimer in the
+ *          documentation and/or other materials provided with the distribution.
+ *
+ *          * Neither the name of the copyright holder nor the names of its
+ *          contributors may be used to endorse or promote products derived from
+ *          this software without specific prior written permission.
+ *
+ *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
+ *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+ *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+//! # getopt
+//!
+//! `getopt` provides a minimal, (essentially) POSIX-compliant option parser.
+
+pub use crate::{
+	error::Error,
+	errorkind::ErrorKind,
+	opt::Opt,
+	parser::Parser,
+	result::Result
+};
+
+mod error;
+mod errorkind;
+mod opt;
+mod parser;
+mod result;
+#[cfg(test)]
+mod tests;

src/getopt-rs/opt.rs

@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and permission
+ * notice:
+ *     The Clear BSD License
+ *
+ *     Copyright © 2017-2023 David Wildasin
+ *     All rights reserved.
+ *
+ *     Redistribution and use in source and binary forms, with or without
+ *     modification, are permitted (subject to the limitations in the disclaimer
+ *     below) provided that the following conditions are met:
+ *
+ *          * Redistributions of source code must retain the above copyright
+ *          notice, this list of conditions, and the following disclaimer.
+ *
+ *          * Redistributions in binary form must reproduce the above copyright
+ *          notice, this list of conditions, and the following disclaimer in the
+ *          documentation and/or other materials provided with the distribution.
+ *
+ *          * Neither the name of the copyright holder nor the names of its
+ *          contributors may be used to endorse or promote products derived from
+ *          this software without specific prior written permission.
+ *
+ *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
+ *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+ *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+use std::fmt;
+
+/// A single option.
+///
+/// For `Opt(x, y)`:
+///   - `x` is the character representing the option.
+///   - `y` is `Some` string, or `None` if no argument was expected.
+///
+/// # Example
+///
+/// ```
+/// # fn main() -> Result<(), Box<dyn std::error::Error>> {
+/// use getopt::Opt;
+///
+/// // args = ["program", "-abc", "foo"];
+/// # let args: Vec<String> = vec!["program", "-abc", "foo"]
+/// #     .into_iter()
+/// #     .map(String::from)
+/// #     .collect();
+/// let optstring = "ab:c";
+/// let mut opts = getopt::Parser::new(&args, optstring);
+///
+/// assert_eq!(Opt('a', None), opts.next().transpose()?.unwrap());
+/// assert_eq!(Opt('b', Some("c".to_string())), opts.next().transpose()?.unwrap());
+/// assert_eq!(None, opts.next().transpose()?);
+/// # Ok(())
+/// # }
+/// ```
+#[derive(Debug, Eq, Ord, PartialEq, PartialOrd)]
+pub struct Opt(pub char, pub Option<String>);
+
+impl fmt::Display for Opt {
+    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
+        write!(f, "Opt({:?}, {:?})", self.0, self.1)
+    }
+}

src/getopt-rs/parser.rs

@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and permission
+ * notice:
+ *     The Clear BSD License
+ *
+ *     Copyright © 2017-2023 David Wildasin
+ *     All rights reserved.
+ *
+ *     Redistribution and use in source and binary forms, with or without
+ *     modification, are permitted (subject to the limitations in the disclaimer
+ *     below) provided that the following conditions are met:
+ *
+ *          * Redistributions of source code must retain the above copyright
+ *          notice, this list of conditions, and the following disclaimer.
+ *
+ *          * Redistributions in binary form must reproduce the above copyright
+ *          notice, this list of conditions, and the following disclaimer in the
+ *          documentation and/or other materials provided with the distribution.
+ *
+ *          * Neither the name of the copyright holder nor the names of its
+ *          contributors may be used to endorse or promote products derived from
+ *          this software without specific prior written permission.
+ *
+ *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
+ *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+ *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+use std::collections::HashMap;
+
+use crate::{ error::Error, errorkind::ErrorKind, opt::Opt, result::Result };
+
+/// The core of the `getopt` crate.
+///
+/// `Parser` is implemented as an iterator over the options present in the given
+/// argument vector.
+///
+/// The method [`next`](#method.next) does the heavy lifting.
+///
+/// # Examples
+///
+/// ## Simplified usage:
+/// ```
+/// # fn main() -> Result<(), Box<dyn std::error::Error>> {
+/// use getopt::Opt;
+///
+/// // args = ["program", "-abc", "foo"];
+/// # let args: Vec<String> = vec!["program", "-abc", "foo"]
+/// #     .into_iter()
+/// #     .map(String::from)
+/// #     .collect();
+/// let mut opts = getopt::Parser::new(&args, "ab:c");
+///
+/// assert_eq!(Some(Opt('a', None)), opts.next().transpose()?);
+/// assert_eq!(1, opts.index());
+/// assert_eq!(Some(Opt('b', Some("c".to_string()))), opts.next().transpose()?);
+/// assert_eq!(2, opts.index());
+/// assert_eq!(None, opts.next());
+/// assert_eq!(2, opts.index());
+/// assert_eq!("foo", args[opts.index()]);
+/// # Ok(())
+/// # }
+/// ```
+///
+/// ## A more idiomatic example:
+/// ```
+/// # fn main() -> Result<(), Box<dyn std::error::Error>> {
+/// use getopt::Opt;
+///
+/// // args = ["program", "-abc", "-d", "foo", "-e", "bar"];
+/// # let mut args: Vec<String> = vec!["program", "-abc", "-d", "foo", "-e", "bar"]
+/// #     .into_iter()
+/// #     .map(String::from)
+/// #     .collect();
+/// let mut opts = getopt::Parser::new(&args, "ab:cd:e");
+///
+/// let mut a_flag = false;
+/// let mut b_flag = String::new();
+/// let mut c_flag = false;
+/// let mut d_flag = String::new();
+/// let mut e_flag = false;
+///
+/// loop {
+///     match opts.next().transpose()? {
+///         None => break,
+///         Some(opt) => match opt {
+///             Opt('a', None) => a_flag = true,
+///             Opt('b', Some(arg)) => b_flag = arg.clone(),
+///             Opt('c', None) => c_flag = true,
+///             Opt('d', Some(arg)) => d_flag = arg.clone(),
+///             Opt('e', None) => e_flag = true,
+///             _ => unreachable!(),
+///         },
+///     }
+/// }
+///
+/// let new_args = args.split_off(opts.index());
+///
+/// assert_eq!(true, a_flag);
+/// assert_eq!("c", b_flag);
+/// assert_eq!(false, c_flag);
+/// assert_eq!("foo", d_flag);
+/// assert_eq!(true, e_flag);
+///
+/// assert_eq!(1, new_args.len());
+/// assert_eq!("bar", new_args.first().unwrap());
+/// # Ok(())
+/// # }
+/// ```
+#[derive(Debug, Eq, PartialEq)]
+pub struct Parser {
+    opts: HashMap<char, bool>,
+    args: Vec<Vec<char>>,
+    index: usize,
+    point: usize,
+}
+
+impl Parser {
+    /// Create a new `Parser`, which will process the arguments in `args`
+	/// according to the options specified in `optstring`.
+    ///
+    /// For compatibility with
+	/// [`std::env::args`](https://doc.rust-lang.org/std/env/fn.args.html),
+    /// valid options are expected to begin at the second element of `args`, and
+	/// `index` is
+    /// initialised to `1`.
+    /// If `args` is structured differently, be sure to call
+	/// [`set_index`](#method.set_index) before the first invocation of
+	/// [`next`](#method.next).
+    ///
+    /// `optstring` is a string of recognised option characters; if a character
+	/// is followed by a colon (`:`), that option takes an argument.
+    ///
+    /// # Note:
+    /// Transforming the OS-specific argument strings into a vector of `String`s
+	/// is the sole responsibility of the calling program, as it involves some
+	/// level of potential information loss (which this crate does not presume
+	/// to handle unilaterally) and error handling (which would complicate the
+	/// interface).
+    pub fn new(args: &[String], optstring: &str) -> Self {
+        let optstring: Vec<char> = optstring.chars().collect();
+        let mut opts = HashMap::new();
+        let mut i = 0;
+        let len = optstring.len();
+
+        while i < len {
+            let j = i + 1;
+
+            if j < len && optstring[j] == ':' {
+                opts.insert(optstring[i], true);
+                i += 1;
+            } else {
+                opts.insert(optstring[i], false);
+            }
+            i += 1;
+        }
+
+        Self {
+            opts,
+            // "explode" the args into a vector of character vectors, to allow
+			// indexing
+            args: args.iter().map(|e| e.chars().collect()).collect(),
+            index: 1,
+            point: 0,
+        }
+    }
+
+    /// Return the current `index` of the parser.
+    ///
+    /// `args[index]` will always point to the the next element of `args`; when
+	/// the parser is
+    /// finished with an element, it will increment `index`.
+    ///
+    /// After the last option has been parsed (and [`next`](#method.next) is
+	/// returning `None`),
+    /// `index` will point to the first non-option argument.
+    pub fn index(&self) -> usize {
+        self.index
+    }
+
+    // `point` must be reset to 0 whenever `index` is changed
+
+    /// Modify the current `index` of the parser.
+    pub fn set_index(&mut self, value: usize) {
+        self.index = value;
+        self.point = 0;
+    }
+
+    /// Increment the current `index` of the parser.
+    ///
+    /// This use case is common enough to warrant its own optimised method.
+    pub fn incr_index(&mut self) {
+        self.index += 1;
+        self.point = 0;
+    }
+}
+
+impl Iterator for Parser {
+    type Item = Result<Opt>;
+
+    /// Returns the next option, if any.
+    ///
+    /// Returns an [`Error`](struct.Error.html) if an unexpected option is
+	/// encountered or if an
+    /// expected argument is not found.
+    ///
+    /// Parsing stops at the first non-hyphenated argument; or at the first
+	/// argument matching "-";
+    /// or after the first argument matching "--".
+    ///
+    /// When no more options are available, `next` returns `None`.
+    ///
+    /// # Examples
+    ///
+    /// ## "-"
+    /// ```
+    /// use getopt::Parser;
+    ///
+    /// // args = ["program", "-", "-a"];
+    /// # let args: Vec<String> = vec!["program", "-", "-a"]
+    /// #     .into_iter()
+    /// #     .map(String::from)
+    /// #     .collect();
+    /// let mut opts = Parser::new(&args, "a");
+    ///
+    /// assert_eq!(None, opts.next());
+    /// assert_eq!("-", args[opts.index()]);
+    /// ```
+    ///
+    /// ## "--"
+    /// ```
+    /// use getopt::Parser;
+    ///
+    /// // args = ["program", "--", "-a"];
+    /// # let args: Vec<String> = vec!["program", "--", "-a"]
+    /// #     .into_iter()
+    /// #     .map(String::from)
+    /// #     .collect();
+    /// let mut opts = Parser::new(&args, "a");
+    ///
+    /// assert_eq!(None, opts.next());
+    /// assert_eq!("-a", args[opts.index()]);
+    /// ```
+    ///
+    /// ## Unexpected option:
+    /// ```
+    /// use getopt::Parser;
+    ///
+    /// // args = ["program", "-b"];
+    /// # let args: Vec<String> = vec!["program", "-b"]
+    /// #     .into_iter()
+    /// #     .map(String::from)
+    /// #     .collect();
+    /// let mut opts = Parser::new(&args, "a");
+    ///
+    /// assert_eq!(
+    ///     "unknown option -- 'b'".to_string(),
+    ///     opts.next().unwrap().unwrap_err().to_string()
+    /// );
+    /// ```
+    ///
+    /// ## Missing argument:
+    /// ```
+    /// use getopt::Parser;
+    ///
+    /// // args = ["program", "-a"];
+    /// # let args: Vec<String> = vec!["program", "-a"]
+    /// #     .into_iter()
+    /// #     .map(String::from)
+    /// #     .collect();
+    /// let mut opts = Parser::new(&args, "a:");
+    ///
+    /// assert_eq!(
+    ///     "option requires an argument -- 'a'".to_string(),
+    ///     opts.next().unwrap().unwrap_err().to_string()
+    /// );
+    /// ```
+    fn next(&mut self) -> Option<Result<Opt>> {
+        if self.point == 0 {
+            /*
+             * Rationale excerpts below taken verbatim from "The Open Group Base
+			 * Specifications Issue 7, 2018 edition", IEEE Std 1003.1-2017
+			 * (Revision of IEEE Std 1003.1-2008).
+             * Copyright © 2001-2018 IEEE and The Open Group.
+             */
+
+            /*
+             * If, when getopt() is called:
+             *      argv[optind]    is a null pointer
+             *      *argv[optind]   is not the character '-'
+             *      argv[optind]    points to the string "-"
+             * getopt() shall return -1 without changing optind.
+             */
+            if self.index >= self.args.len()
+                || self.args[self.index].is_empty()
+                || self.args[self.index][0] != '-'
+                || self.args[self.index].len() == 1
+            {
+                return None;
+            }
+
+            /*
+             * If:
+             *      argv[optind]    points to the string "--"
+             * getopt() shall return -1 after incrementing index.
+             */
+            if self.args[self.index][1] == '-' && self.args[self.index].len() == 2 {
+                self.incr_index();
+                return None;
+            }
+
+            // move past the starting '-'
+            self.point += 1;
+        }
+
+        let opt = self.args[self.index][self.point];
+        self.point += 1;
+
+        match self.opts.get(&opt) {
+            None => {
+                if self.point >= self.args[self.index].len() {
+                    self.incr_index();
+                }
+                Some(Err(Error::new(ErrorKind::UnknownOption, opt)))
+            }
+            Some(false) => {
+                if self.point >= self.args[self.index].len() {
+                    self.incr_index();
+                }
+
+                Some(Ok(Opt(opt, None)))
+            }
+            Some(true) => {
+                let arg: String = if self.point >= self.args[self.index].len() {
+                    self.incr_index();
+                    if self.index >= self.args.len() {
+                        return Some(Err(Error::new(
+									ErrorKind::MissingArgument,
+									opt,
+								)));
+                    }
+                    self.args[self.index].iter().collect()
+                } else {
+                    self.args[self.index]
+                        .clone()
+                        .split_off(self.point)
+                        .iter()
+                        .collect()
+                };
+
+                self.incr_index();
+
+                Some(Ok(Opt(opt, Some(arg))))
+            }
+        }
+    }
+}

src/getopt-rs/result.rs

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and permission
+ * notice:
+ *     The Clear BSD License
+ *
+ *     Copyright © 2017-2023 David Wildasin
+ *     All rights reserved.
+ *
+ *     Redistribution and use in source and binary forms, with or without
+ *     modification, are permitted (subject to the limitations in the disclaimer
+ *     below) provided that the following conditions are met:
+ *
+ *          * Redistributions of source code must retain the above copyright
+ *          notice, this list of conditions, and the following disclaimer.
+ *
+ *          * Redistributions in binary form must reproduce the above copyright
+ *          notice, this list of conditions, and the following disclaimer in the
+ *          documentation and/or other materials provided with the distribution.
+ *
+ *          * Neither the name of the copyright holder nor the names of its
+ *          contributors may be used to endorse or promote products derived from
+ *          this software without specific prior written permission.
+ *
+ *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
+ *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+ *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+use std::result;
+
+use crate::error::Error;
+
+/// A specialized `Result` type for use with [`Parser`](struct.Parser.html)
+pub type Result<T> = result::Result<T, Error>;

src/getopt-rs/tests.rs

@@ -0,0 +1,228 @@
+/*
+ * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and permission
+ * notice:
+ *     The Clear BSD License
+ *
+ *     Copyright © 2017-2023 David Wildasin
+ *     All rights reserved.
+ *
+ *     Redistribution and use in source and binary forms, with or without
+ *     modification, are permitted (subject to the limitations in the disclaimer
+ *     below) provided that the following conditions are met:
+ *
+ *          * Redistributions of source code must retain the above copyright
+ *          notice, this list of conditions, and the following disclaimer.
+ *
+ *          * Redistributions in binary form must reproduce the above copyright
+ *          notice, this list of conditions, and the following disclaimer in the
+ *          documentation and/or other materials provided with the distribution.
+ *
+ *          * Neither the name of the copyright holder nor the names of its
+ *          contributors may be used to endorse or promote products derived from
+ *          this software without specific prior written permission.
+ *
+ *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
+ *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+ *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+use crate::{Opt, Parser};
+
+macro_rules! basic_test {
+    ($name:ident, $expect:expr, $next:expr, [$($arg:expr),+], $optstr:expr) => (
+        #[test]
+        fn $name() -> Result<(), String> {
+            let expect: Option<Opt> = $expect;
+            let args: Vec<String> = vec![$($arg),+]
+				.into_iter()
+				.map(String::from)
+				.collect();
+            let next: Option<String> = $next;
+            let mut opts = Parser::new(&args, $optstr);
+
+            match opts.next().transpose() {
+                Err(error) => {
+                    return Err(format!("next() returned {:?}", error))
+                },
+                Ok(actual) => if actual != expect {
+                    return Err(
+						format!("expected {:?}; got {:?}", expect, actual)
+					)
+                },
+            };
+
+            match next {
+                None => if opts.index() < args.len() {
+                    return Err(format!(
+							"expected end of args; got {:?}", args[opts.index()]
+					))
+                },
+                Some(n) => if args[opts.index()] != n {
+                    return Err(format!(
+							"next arg: expected {:?}; got {:?}",
+							n,
+							args[opts.index()]
+					))
+                },
+            };
+
+            Ok(())
+        }
+    )
+}
+
+#[rustfmt::skip] basic_test!(
+	blank_arg, None, Some(String::new()), ["x", ""], "a"
+);
+#[rustfmt::skip] basic_test!(
+	double_dash, None, Some("-a".to_string()), ["x", "--", "-a", "foo"], "a"
+);
+#[rustfmt::skip] basic_test!(no_opts_1, None, None, ["x"], "a");
+#[rustfmt::skip] basic_test!(
+	no_opts_2, None, Some("foo".to_string()), ["x", "foo"], "a"
+);
+#[rustfmt::skip] basic_test!(
+	no_opts_3, None, Some("foo".to_string()), ["x", "foo", "-a"], "a"
+);
+#[rustfmt::skip] basic_test!(
+	single_dash, None, Some("-".to_string()), ["x", "-", "-a", "foo"], "a"
+);
+#[rustfmt::skip] basic_test!(
+	single_opt,
+	Some(Opt('a', None)),
+	Some("foo".to_string()),
+	["x", "-a", "foo"],
+	"a"
+);
+#[rustfmt::skip] basic_test!(
+	single_optarg,
+	Some(Opt('a', Some("foo".to_string()))),
+	None,
+	["x", "-a", "foo"],
+	"a:"
+);
+
+macro_rules! error_test {
+    ($name:ident, $expect:expr, [$($arg:expr),+], $optstr:expr) => (
+        #[test]
+        fn $name() -> Result<(), String> {
+            let expect: String = $expect.to_string();
+            let args: Vec<String> = vec![$($arg),+]
+				.into_iter()
+				.map(String::from)
+				.collect();
+            let mut opts = Parser::new(&args, $optstr);
+
+            match opts.next() {
+                None => {
+                    return Err(format!(
+							"unexpected successful response: end of options"
+					))
+                },
+                Some(Err(actual)) => {
+                    let actual = actual.to_string();
+
+                    if actual != expect {
+                        return Err(
+							format!("expected {:?}; got {:?}", expect, actual)
+						);
+                    }
+                },
+                Some(Ok(opt)) => {
+                    return Err(
+						format!("unexpected successful response: {:?}", opt)
+					)
+                },
+            };
+
+            Ok(())
+        }
+    )
+}
+
+#[rustfmt::skip] error_test!(
+	bad_opt,
+	"unknown option -- 'b'",
+	["x", "-b"],
+	"a"
+);
+
+#[rustfmt::skip] error_test!(
+	missing_optarg,
+	"option requires an argument -- 'a'",
+	["x", "-a"],
+	"a:"
+);
+
+#[test]
+fn multiple() -> Result<(), String> {
+    let args: Vec<String> = vec!["x", "-abc", "-d", "foo", "-e", "bar"]
+        .into_iter()
+        .map(String::from)
+        .collect();
+    let optstring = "ab:d:e".to_string();
+    let mut opts = Parser::new(&args, &optstring);
+
+    macro_rules! check_result {
+        ($expect:expr) => {
+            let expect: Option<Opt> = $expect;
+            match opts.next().transpose() {
+                Err(error) => {
+					return Err(format!("next() returned {:?}", error));
+				},
+                Ok(actual) => {
+                    if actual != expect {
+                        return Err(
+							format!("expected {:?}; got {:?}", expect, actual)
+						);
+                    }
+                }
+            };
+        };
+    }
+
+    check_result!(Some(Opt('a', None)));
+    check_result!(Some(Opt('b', Some("c".to_string()))));
+    check_result!(Some(Opt('d', Some("foo".to_string()))));
+    check_result!(Some(Opt('e', None)));
+    check_result!(None);
+
+    Ok(())
+}
+
+#[test]
+fn continue_after_error() {
+    let args: Vec<String> = vec!["x", "-z", "-abc"]
+        .into_iter()
+        .map(String::from)
+        .collect();
+    let optstring = "ab:d:e".to_string();
+    for _opt in Parser::new(&args, &optstring) {
+        // do nothing, should not panic
+    }
+}

src/hru.rs

@@ -27,51 +27,42 @@ extern crate strerror;
 extern crate sysexits;
 
 use strerror::StrError;
-use sysexits::{ EX_DATAERR, EX_IOERR, EX_SOFTWARE, EX_USAGE };
+use sysexits::{ EX_DATAERR, EX_IOERR, EX_SOFTWARE };
 
-#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
-#[cfg(target_os="openbsd")] extern crate openbsd;
-#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
-
-/* list of SI prefixes */
 const LIST: [(u32, &str); 10] = [
-	(3, "k"), /* kilo */
-	(6, "M"), /* mega */
-	(9, "G"), /* giga */
-	(12, "T"), /* tera */
-	(15, "P"), /* peta */
-	(18, "E"), /* exa */
-	(21, "Z"), /* zetta */
-	(24, "Y"), /* yotta */
-	(27, "R"), /* ronna */
-	(30, "Q"), /* quetta */
+	(3, "k"),
+	(6, "M"),
+	(9, "G"),
+	(12, "T"),
+	(15, "P"),
+	(18, "E"),
+	(21, "Z"),
+	(24, "Y"),
+	(27, "R"),
+	(30, "Q")
 ];
 
 fn convert(input: u128) -> Result<(f64, (u32, &'static str)), String> {
-	/* preserve decimal places in output by casting to a float */
-	let mut out = (input as f64, (0_u32, "")); 
 
-	if input < 1000 { return Ok(out); } /* too low to convert */
+	let mut out = (input as f64, (0_u32, ""));
+	if input < 1000 { return Ok(out); }
 
 	for (n, p) in LIST {
 		let c = match 10_u128.checked_pow(n) {
 			Some(c) => c,
-			None => { /* too big for the laws of computing :( */
+			None => {
 				return Err(format!("10^{}: Integer overflow", n.to_string()));
 			},
 		};
 
 		match c.cmp(&input) {
-			Ordering::Less => { /* c < input */
-				/* the program will keep assigning out every loop until either
-				 * the list runs out of higher prefix bases or the input is
-				 * greater than the prefix base */
+			Ordering::Less => {
 				out = (input as f64 / c as f64, (n, p));
 			},
-			Ordering::Equal => { /* c == input */
+			Ordering::Equal => {
 				return Ok((input as f64 / c as f64, (n, p)));
 			},
-			Ordering::Greater => {}, /* c > input */
+			Ordering::Greater => {},
 		};
 	}
 
@@ -80,22 +71,7 @@ fn convert(input: u128) -> Result<(f64, (u32, &'static str)), String> {
 
 fn main() -> ExitCode {
 	let argv = args().collect::<Vec<String>>();
-
-	if let Some(_) = argv.get(1) {
-		eprintln!("Usage: {}", argv[0]);
-		return ExitCode::from(EX_USAGE as u8);
-	}
-
-	#[cfg(target_os="openbsd")] {
-		let promises = Promises::new("stdio");
-		if let Err(e) = pledge(Some(promises), None) {
-			eprintln!("{}: {}", argv[0], e.strerror());
-			return ExitCode::from(EX_OSERR as u8);
-		}
-	}
-
 	let mut buf = String::new();
-
 	while let Ok(_) = stdin().read_line(&mut buf) {
 		if buf.is_empty() { return ExitCode::SUCCESS; }
 
@@ -120,7 +96,6 @@ fn main() -> ExitCode {
 
 		let si_prefix = format!("{}B", prefix.1);
 
-		/* round output number to one decimal place */
 		let out = ((number * 10.0).round() / 10.0).to_string();
 
 		stdout().write_all(format!("{} {}\n", out, si_prefix).as_bytes())

src/intcmp.c

@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2023 DTB <trinity@trinity.moe>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+#include <errno.h> /* errno */
+#include <stdio.h> /* fprintf(3), stderr */
+#include <stdlib.h> /* strtol(3), size_t, EXIT_FAILURE */
+#include <unistd.h> /* getopt(3), optind */
+#include <sysexits.h>
+
+/* 0b00? */		/*                     Equal | -e  | 0b001 | 1 */
+#define EQUAL	0x01	/*                   Greater | -g  | 0b010 | 2 */
+/* 0b0?0 */		/*          Greater or Equal | -ge | 0b011 | 3 */
+#define GREATER	0x02	/*                      Less | -l  | 0b100 | 4 */
+/* 0b?00 */		/*             Less or Equal | -le | 0b101 | 5 */
+#define LESS	0x04	/* Inequal (Greater or Less) | -gl | 0b110 | 6 */
+
+static char *program_name = "intcmp";
+
+int main(int argc, char *argv[]){
+	int c;
+	size_t i;
+	unsigned char mode;
+	int r; /* reference integer */
+
+	mode = 0;
+
+	if(argc < 3)
+		goto usage;
+
+	while((c = getopt(argc, argv, "egl")) != -1)
+		switch(c){
+		case 'e': mode |= EQUAL;   break;
+		case 'g': mode |= GREATER; break;
+		case 'l': mode |= LESS;	   break;
+		default:  goto usage;
+		}
+
+	if(optind + 2 /* ref cmp */ > argc){
+usage:		fprintf(stderr,
+			"Usage: %s (-eghl) [integer] [integer...]\n",
+			argv[0] == NULL ? program_name : argv[0]);
+		return EX_USAGE;
+	}
+
+	i = optind;
+
+	do{	r = c;
+		c = strtol(argv[i], &argv[i], 10);
+		if(*argv[i] != '\0' || errno != 0){
+			fprintf(stderr, "%s: argument #%d: Invalid integer\n",
+				argv[0], (int)i);
+			return EX_USAGE;
+		}
+
+		if(i == optind)
+			continue;
+
+		/* rule enforcement; if a mode isn't permitted and the numbers
+		 * correspond to it, return 1 */
+		if(		(!(mode & EQUAL) && r == c)
+				|| (!(mode & GREATER) && r > c)
+				|| (!(mode & LESS) && r < c))
+			return 1;
+	}while(++i < argc);
+	
+	return 0;
+}

src/intcmp.rs

@@ -1,97 +0,0 @@
-/*
- * Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
- * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- */
-
-use std::{
-	env::args,
-	process::ExitCode
-};
-
-extern crate getopt;
-extern crate sysexits;
-
-use getopt::GetOpt;
-use sysexits::EX_USAGE;
-
-#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
-#[cfg(target_os="openbsd")] extern crate openbsd;
-#[cfg(target_os="openbsd")] extern crate strerror;
-#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
-#[cfg(target_os="openbsd")] use strerror::StrError;
-
-fn usage(s: &str) -> ExitCode {
-	eprintln!("Usage: {} [-egl] integer integer...", s);
-	ExitCode::from(EX_USAGE as u8)
-}
-
-fn main() -> ExitCode {
-	let argv = args().collect::<Vec<String>>();
-
-	#[cfg(target_os="openbsd")] {
-		let promises = Promises::new("stdio");
-		if let Err(e) = pledge(Some(promises), None) {
-			eprintln!("{}: {}", argv[0], e.strerror());
-			return ExitCode::from(EX_OSERR as u8);
-		}
-	}
-
-	let mut e = false; /* args can be == */
-	let mut g = false; /* args can be > */
-	let mut l = false; /* args can be < */
-	let mut optind = 0;
-
-	if argv.len() < 3 { return usage(&argv[0]); }
-
-	while let Some(opt) = argv.getopt("egl") {
-		match opt.opt() {
-			Ok("e") => e = true,
-			Ok("g") => g = true,
-			Ok("l") => l = true,
-			_ => return usage(&argv[0]),
-		}
-		optind = opt.ind();
-	}
-
-	if !e & !g & !l { return usage(&argv[0]); }
-
-	if argv.len() - optind < 2 /* see usage */ { return usage(&argv[0]); }
-
-	let mut prev: Option<usize> = None; /* no previous operand */
-	let mut currn: usize;
-
-	for arg in argv.iter().skip(optind) { /* iterate operands */
-		match arg.parse::<usize>() { /* parse current operand */
-			Ok(n) => currn = n,
-			Err(e) => {
-				eprintln!("{}: {}: {}", &argv[0], arg, e);
-				return ExitCode::from(EX_USAGE as u8);
-			}
-		}
-
-		if let Some(prevn) = prev { /* if there was a previous opr., test */
-			if (!e && prevn == currn)
-					|| (!g && prevn > currn)
-					|| (!l && prevn < currn)
-				{ return ExitCode::FAILURE; }
-		}
-
-		prev = Some(currn); /* there is a previous operand */
-	}
-
-	ExitCode::SUCCESS
-}

src/libgetopt.rs

@@ -1,202 +0,0 @@
-/*
- * Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- */
-
-use std::ffi::{ c_int, c_char, CString, CStr };
-
-/* binding to getopt(3p) */
-extern "C" {
-	static mut optarg: *mut c_char;
-	static mut _opterr: c_int;
-	static mut optind: c_int;
-	static mut optopt: c_int;
-
-	fn getopt(
-		___argc: c_int,
-		___argv: *const *mut c_char,
-		__shortopts: *const c_char,
-	) -> c_int;
-}
-
-#[derive(Clone, Debug)]
-pub enum OptError {
-	MissingArg(String),
-	UnknownOpt(String),
-}
-
-#[derive(Clone, Debug)]
-pub struct Opt {
-	arg: Option<String>, /* option argument */
-	ind: *mut i32, /* option index */
-	opt: Result<String, OptError>, /* option option */
-}
-
-impl Opt {
-	pub fn arg(&self) -> Option<String> { self.arg.clone() }
-
-	/* sets optarg if default is desired */
-	pub fn arg_or(&self, default: impl std::fmt::Display) -> String {
-		default.to_string()
-	}
-
-	/* makes matching the output of this method more bearable */
-	pub fn opt(&self) -> Result<&str, OptError> {
-		self.opt.as_ref().map(|o| o.as_str()).map_err(OptError::clone)
-	}
-
-	/* From getopt(3p):
-	 *
-	 * The variable optind is the index of the next element of the argv[]
-	 * vector to be processed. It shall be initialized to 1 by the system, and
-	 * getopt() shall update it when it finishes with each element of argv[].
-	 * If the application sets optind to zero  before calling getopt(), the
-	 * behavior is unspecified. When an element of argv[] contains multiple
-	 * option characters, it is unspecified how getopt() determines which
-	 * options have already been processed. */
-	pub fn ind(&self) -> usize { unsafe { *self.ind as usize } }
-
-	/* this is patently terrible and is only happening because I’m stubborn */
-	pub fn set_ind(&self, ind: i32) { unsafe { *self.ind = ind; } }
-}
-
-/* function signature */
-pub trait GetOpt {
-	fn getopt(&self, optstring: &str) -> Option<Opt>;
-}
-
-impl GetOpt for Vec<String> {
-    fn getopt(&self, optstring: &str) -> Option<Opt> {
-        let c_strings: Vec<_> = self
-			.iter()
-			.cloned()
-			.map(|x| CString::new(x).unwrap().into_raw())
-			.collect();
-
-		/* god knows what this does */
-		let boxed = Box::into_raw(c_strings.into_boxed_slice());
-		let argv = boxed as *const *mut c_char;
-
-		/* operations are separated out so that everything lives long enough */
-        let opts = CString::new(optstring).unwrap().into_raw();
-        let len = self.len() as c_int;
-
-        unsafe {
-            let ret = match getopt(len, argv, opts) { 
-				/* From getopt(3p):
-				 *
-				 * The getopt() function shall return the next option character
-				 * specified on the command line.
-				 *
-				 * A <colon> (':') shall be returned if getopt() detects a
-				 * missing argument and the first character of optstring was a
-				 * <colon> (':').
-				 *
-				 * A <question-mark> ('?') shall be returned if getopt()
-				 * encounters an option character not in optstring or detects a
-				 * missing argument and the first character of optstring was not
-				 * a <colon> (':').
-				 *
-				 * Otherwise, getopt() shall return -1 when all command line
-				 * options are parsed. */
-				58 => { /* ASCII ':' */
-					Some(Opt {
-						arg: None,
-						ind: std::ptr::addr_of_mut!(optind),
-						/* error containing option */
-						opt: Err(OptError::MissingArg(optopt.to_string())),
-					})
-				},
-				63 => { /* ASCII '?' */
-					Some(Opt {
-						arg: None,
-						ind: std::ptr::addr_of_mut!(optind),
-						/* error containing option */
-						opt: Err(OptError::UnknownOpt(optopt.to_string())),
-					})
-				},
-				/* From getopt(3p):
-				 *
-				 * If, when getopt() is called:
-				 *
-				 * argv[optind]  is a null pointer
-				 * *argv[optind]  is not the character -
-				 * argv[optind]  points to the string "-"
-				 *
-				 * getopt() shall return -1 without changing optind.  If:
-				 *
-				 * argv[optind]   points to the string "--"
-				 *
-				 * getopt() shall return -1 after incrementing optind. */
-                -1 => return None,
-                opt => {
-					let arg: Option<String>;
-
-					if optarg.is_null() { arg = None; }
-					else {
-						arg = Some(CStr::from_ptr(optarg)
-							.to_string_lossy()
-							.into_owned());
-					}
-
-					Some(Opt {
-						arg,
-						ind: std::ptr::addr_of_mut!(optind),
-						/* I didn’t need to cast this before; I rewrote the
-						 * pointer logic and now I do
-						 *
-						 * I don’t know why this is */
-						opt: Ok((opt as u8 as char).to_string()),
-					})
-				},
-            };
-
-			/* delloc argv (something online said I should do this) */
-			let _ = Box::from_raw(boxed);
-			return ret;
-        }
-    }
-}
-
-/* tests (good) */
-#[cfg(test)]
-mod tests {
-	use GetOpt;
-
-	#[test]
-	fn testing() {
-		let argv: Vec<String> = ["test", "-b", "-f", "arg", "-o", "arg"]
-			.iter()
-			.map(|s| s.to_string())
-			.collect();
-
-		while let Some(opt) = argv.getopt(":abf:o:") {
-			match opt.opt() {
-				Ok("a") => assert_eq!(opt.ind(), 1),
-				Ok("b") => assert_eq!(opt.ind(), 2),
-				Ok("f") | Ok("o") => {
-					assert_eq!(opt.arg(), Some("arg".into()));
-				},
-				_ => assert!(false),
-			};
-		}
-
-		if let Some(opt) = argv.getopt("abc:") {
-			opt.clone().set_ind(1);
-			assert_eq!(opt.ind(), 1);
-		}
-	}
-}

src/libopenbsd.rs

@@ -1,97 +0,0 @@
-/*
- * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- */
-
-use std::{
-	ffi::{ CString, c_char },
-	io::Error,
-	ptr::null,
-};
-
-mod openbsd {
-	use std::ffi::{ c_char, c_int };
-	extern "C" {
-		pub fn pledge(arg1: *const c_char, arg2: *const c_char) -> c_int;
-
-		pub fn unveil(arg1: *const c_char, arg2: *const c_char) -> c_int;
-
-		pub fn __errno() -> *mut c_int;
-	}
-}
-
-pub struct Promises(*const c_char);
-
-impl Promises {
-	pub fn new(promises: &str) -> Self {
-		let p = CString::new(promises).unwrap();
-
-		Promises(p.into_raw() as *const c_char)
-	}
-}
-
-pub fn pledge(
-	promises: Option<Promises>, execpromises: Option<Promises>
-) -> Result<(), Error> {
-	/* From pledge(2):
-	 *
-	 * Passing NULL to promises or execpromises specifies to not change
-	 * the current value. */
-	let arg1 = promises.unwrap_or(Promises(null())).0;
-	let arg2 = execpromises.unwrap_or(Promises(null())).0;
-
-	unsafe {
-		match openbsd::pledge(arg1, arg2) {
-			-1 => Err(Error::from_raw_os_error(*openbsd::__errno())),
-			0 => Ok(()),
-			_ => panic!(), /* unreachable */
-		}
-	}
-}
-
-pub struct UnveilPerms(CString);
-
-impl UnveilPerms {
-	pub fn new(permissions: Vec<char>) -> Self {
-		if permissions.is_empty() {
-			return UnveilPerms(CString::new("").unwrap());
-		}
-
-		UnveilPerms(
-			CString::new(permissions.iter().collect::<String>()).unwrap()
-		)
-	}
-}
-
-pub fn unveil(
-	path: Option<&str>,
-	permissions: Option<UnveilPerms>,
-) -> Result<(), Error> {
-	let path_c = path.map(CString::new).map(Result::unwrap);
-	let arg1 = path_c.map(|p| p.into_raw() as *const c_char).unwrap_or(null());
-
-	let arg2 = permissions
-		.map(|p| p.0.into_raw() as *const c_char)
-		.unwrap_or(null());
-
-	unsafe {
-		match openbsd::unveil(arg1, arg2) {
-			-1 => Err(Error::from_raw_os_error(*openbsd::__errno())),
-			0 => Ok(()),
-			_ => panic!(), /* unreachable */
-		}
-	}
-}

src/mm.c

@@ -0,0 +1,224 @@
+/*
+ * Copyright (c) 2024 DTB <trinity@trinity.moe>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+#include <errno.h> /* errno */
+#include <signal.h> /* signal(2), SIG_ERR, SIG_IGN, SIGINT */
+#include <stdio.h> /* fclose(3), fopen(3), fprintf(3), getc(3), putc(3),
+                    * setvbuf(3), size_t, _IONBF, NULL */
+#include <stdlib.h> /* free(3), realloc(3) */
+#include <string.h> /* strcmp(3), strerror(3) */
+#include <unistd.h> /* getopt(3) */
+#if !defined EX_IOERR || !defined EX_OK || !defined EX_OSERR \
+		|| !defined EX_USAGE
+#	include <sysexits.h>
+#endif
+extern int errno;
+
+/* This structure is how open files are tracked. */
+struct Files{
+	size_t a;	/* allocation */
+	size_t s;	/* used size */
+	char *mode;	/* file opening mode */
+	char **names;	/* file names */
+	FILE **files;	/* file pointers */
+};
+
+/* How much to grow the allocation when it's saturated. */
+#ifndef ALLOC_INCREMENT
+#	define ALLOC_INCREMENT 1
+#endif
+
+/* How much to grow the allocation at program start. */
+#ifndef ALLOC_INITIAL
+#	define ALLOC_INITIAL 10
+#endif
+
+/* pre-allocated strings */
+static char *program_name = "<no argv[0]>";
+static char *stdin_name = "<stdin>";
+static char *stdout_name = "<stdout>";
+static char *stderr_name = "<stderr>";
+static char *(fmode[]) = { (char []){"rb"}, (char []){"rb+"} };
+static char *wharsh = "wb";
+
+/* Adds the open FILE pointer for the file at the path s to the files struct,
+ * returning the FILE if successful and NULL if not, allocating more memory in
+ * the files buffers as needed. */
+static FILE *
+Files_append(struct Files *files, FILE *file, char *name){
+
+	if(file == NULL || (files->s == files->a
+			&& ((files->files = realloc(files->files,
+					(files->a += (files->a == 0)
+						? ALLOC_INITIAL
+						: ALLOC_INCREMENT)
+					* sizeof *(files->files))) == NULL
+				|| (files->names = realloc(files->names,
+					files->a * sizeof *(files->names))) == NULL)))
+		return NULL;
+
+	files->names[files->s] = name;
+	return files->files[files->s++] = file;
+}
+
+/* Opens the file at the path p and puts it in the files struct, returning NULL
+ * if either the opening or the placement of the open FILE pointer fail. */
+#define Files_open(files, p) \
+	Files_append((files), fopen((p), (files)->mode), (p))
+
+/* Prints a diagnostic message based on errno and returns an exit status
+ * appropriate for an OS error. */
+static int
+oserr(char *s, char *r){
+
+	fprintf(stderr, "%s: %s: %s\n", s, r, strerror(errno));
+
+	return EX_OSERR;
+}
+
+/* Hijacks i and j from main and destructs the files[2] struct used by main by
+ * closing its files and freeing its files and names arrays, returning retval
+ * from main. */
+#define terminate \
+	for(i = 0; i < 2; ++i){ \
+		for(j = 0; j < files[i].s; ++j) \
+			if(files[i].files[j] != stdin \
+					&& files[i].files[j] != stdout \
+					&& files[i].files[j] != stderr) \
+				fclose(files[i].files[j]); \
+		free(files[i].files); \
+		free(files[i].names); \
+	} \
+	return retval
+
+int main(int argc, char *argv[]){
+	int c;
+	struct Files files[2]; /* {read, write} */
+	size_t i;
+	size_t j;
+	size_t k; /* loop index but also unbuffer status */
+	int retval;
+
+	/* Initializes the files structs with their default values, standard
+	 * input and standard output. If an input or an output is specified
+	 * these initial values will be overwritten, so to, say, use mm(1)
+	 * equivalently to tee(1p), -o - will need to be specified before
+	 * additional files to ensure standard output is still written. */
+	for(i = 0; i < 2; ++i){
+		files[i].a = 0;
+		files[i].s = 0;
+		files[i].mode = fmode[i];
+		files[i].files = NULL;
+		files[i].names = NULL;
+		Files_append(&files[i], i == 0 ? stdin : stdout,
+			i == 0 ? stdin_name : stdout_name);
+		files[i].s = 0;
+	}
+
+	k = 0;
+
+	if(argc > 0)
+		program_name = argv[0];
+
+	if(argc > 1)
+		while((c = getopt(argc, argv, "aehi:no:u")) != -1)
+			switch(c){
+			case 'a': /* "rb+" -> "ab" */
+				files[1].mode[0] = 'a';
+				files[1].mode[2] = '\0';
+				break;
+			case 'e':
+				if(Files_append(&files[1], stderr, stderr_name) != NULL)
+					break;
+				retval = oserr(argv[0], "-e");
+				terminate;
+			case 'i':
+				if((strcmp(optarg, "-") == 0 && Files_append(&files[0],
+							stdin, stdin_name) != NULL)
+						|| Files_open(&files[0], optarg) != NULL)
+					break;
+				retval = oserr(argv[0], optarg);
+				terminate;
+			case 'o':
+				if((strcmp(optarg, "-") == 0 && Files_append(&files[1],
+							stdout, stdout_name) != NULL)
+						|| Files_open(&files[1], optarg) != NULL)
+					break;
+				/* does not exist, so try to create it */
+				if(errno == ENOENT){
+					files[1].mode = wharsh;
+					if(Files_open(&files[1], optarg) != NULL){
+						files[1].mode = fmode[1];
+						break;
+					}
+				}
+				retval = oserr(argv[0], optarg);
+				terminate;
+			case 'n':
+				if(signal(SIGINT, SIG_IGN) != SIG_ERR)
+					break;
+				retval = oserr(argv[0], "-n");
+				terminate;
+			case 'u':
+				k = 1;
+				break;
+			default:
+				fprintf(stderr, "Usage: %s (-aenu) (-i [input])..."
+					" (-o [output])...\n", argv[0]);
+				retval = EX_USAGE;
+				terminate;
+			}
+
+	files[0].s += files[0].s == 0;
+	files[1].s += files[1].s == 0;
+	
+	/* Unbuffer files. */
+	if(k){
+		for(i = 0;
+			i < files[0].s;
+			setvbuf(files[0].files[i++], NULL, _IONBF, 0));
+		for(i = 0;
+			i < files[1].s;
+			setvbuf(files[1].files[i++], NULL, _IONBF, 0));
+	}
+
+	retval = EX_OK;
+
+	/* Actual program loop. */
+	for(i = 0; i < files[0].s; ++i) /* iterate ins */
+		while((c = getc(files[0].files[i])) != EOF) /* iterate chars */
+			for(j = 0; j < files[1].s; ++j) /* iterate outs */
+				if(putc(c, files[1].files[j]) == EOF){
+					/* notebook's full */
+					retval = EX_IOERR;
+					fprintf(stderr, "%s: %s: %s\n",
+						program_name, files[1].names[j], strerror(errno));
+					if(fclose(files[1].files[j]) == EOF)
+						fprintf(stderr, "%s: %s: %s\n",
+							program_name, files[1].names[j], strerror(errno));
+					/* massage out the tense muscle */
+					for(k = j--; k < files[1].s - 1; ++k){
+						files[1].files[k] = files[1].files[k+1];
+						files[1].names[k] = files[1].names[k+1];
+					}
+					if(--files[1].s == 0)
+						terminate;
+				}
+
+	terminate;
+}

src/mm.rs

@@ -1,230 +0,0 @@
-/*
- * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
- * Copyright (c) 2024 DTB <trinity@trinity.moe>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- */
-
-use std::{
-	env::args,
-	fs::File,
-	io::{ stdin, stdout, stderr, BufWriter, Read, Write },
-	os::fd::{ AsRawFd, FromRawFd },
-	process::{ exit, ExitCode },
-};
-
-extern crate getopt;
-extern crate strerror;
-extern crate sysexits;
-
-use getopt::GetOpt;
-use strerror::StrError;
-use sysexits::{ EX_IOERR, EX_USAGE };
-
-#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
-#[cfg(target_os="openbsd")] extern crate openbsd;
-#[cfg(target_os="openbsd")]
-use openbsd::{
-	Promises,
-	UnveilPerms,
-	pledge,
-	unveil,
-};
-
-use ArgMode::*;
-
-enum ArgMode { In, Out }
-
-fn main() -> ExitCode {
-	let argv = args().collect::<Vec<_>>();
-	let usage = format!("Usage: {} [-aetu] [-i input] [-o output]", argv[0]);
-
-	#[cfg(target_os="openbsd")] {
-		let promises = Promises::new("cpath rpath stdio unveil wpath");
-		if let Err(e) = pledge(Some(promises), None) {
-			eprintln!("{}: {}", argv[0], e.strerror());
-			return ExitCode::from(EX_OSERR as u8);
-		}
-	}
-
-	let mut a = false; /* append to the file */
-	let mut e = false; /* use stderr as an output */
-	let mut t = true; /* do not truncate the file before writing */
-	let mut u = false; /* unbuffer i/o */
-	let mut ins = Vec::new(); /* initial input file path vector */
-	let mut outs = Vec::new(); /* initial output file path vector */
-	let mut mode: Option<ArgMode> = None; /* mode set by last-used option */
-	let mut optind = 0;
-
-	while let Some(opt) = argv.getopt("aei:o:tu") {
-		match opt.opt() {
-			Ok("a") => a = true,
-			Ok("e") => e = true, 
-			Ok("u") => u = true,
-			Ok("t") => t = false,
-			Ok("i") => { /* add inputs */
-				let input = opt.arg().unwrap();
-				ins.push(input);
-				mode = Some(In); /* latest argument == -i */
-			},
-			Ok("o") => { /* add output */
-				let output = opt.arg().unwrap();
-				outs.push(output);
-				mode = Some(Out); /* latest argument == -o */
-			},
-			Err(_) | Ok(_) => {
-				eprintln!("{}", usage);
-				return ExitCode::from(EX_USAGE as u8);
-			},
-		};
-
-		optind = opt.ind();
-	}
-
-	let remaining = argv.iter().skip(optind);
-
-	/* check the last flag specified */
-	if let Some(m) = mode {
-		for arg in remaining {
-			/* move the subsequent arguments to the list of inputs or outputs */
-			match m {
-				In => ins.push(arg.to_string()),
-				Out => outs.push(arg.to_string()),
-			};
-		}
-	}
-
-	#[cfg(target_os="openbsd")] {
-		for input in &ins {
-			let perms = UnveilPerms::new(vec!['r']);
-
-			if let Err(e) = unveil(Some(&input), Some(perms)) {
-				eprintln!("{}: {}", argv[0], e.strerror());
-				return ExitCode::from(EX_OSERR as u8);
-			}
-		}
-
-		for output in &outs {
-			let perms = UnveilPerms::new(vec!['c', 'w']);
-
-			if let Err(e) = unveil(Some(&output), Some(perms)) {
-				eprintln!("{}: {}", argv[0], e.strerror());
-				return ExitCode::from(EX_OSERR as u8);
-			}
-		}
-
-		if let Err(e) = unveil(None, None) {
-			eprintln!("{}: {}", argv[0], e.strerror());
-			return ExitCode::from(EX_OSERR as u8);
-		}
-	}
-
-	if ins.is_empty() && outs.is_empty() && argv.len() > optind {
-		eprintln!("Usage: {}", usage);
-		return ExitCode::from(EX_USAGE as u8);
-	}
-
-	/* use stdin if no inputs are specified */
-	if ins.is_empty() { ins.push("-".to_string()); }
-
-	/* use stdout if no outputs are specified */
-	if outs.is_empty() && !e { outs.push("-".to_string()); }
-	
-	/* map all path strings to files */
-	let inputs = ins.iter().map(|file| {
-		/* if a file is “-”, it is stdin */
-		if *file == "-" {
-			/* portable way to access stdin as a file */
-			return unsafe { File::from_raw_fd(stdin().as_raw_fd()) };
-		}
-
-		match File::open(file) {
-			Ok(f) => f,
-			Err(e) => {
-				eprintln!("{}: {}: {}", argv[0], file, e.strerror());
-				exit(EX_IOERR);
-			},
-		}
-	}).collect::<Vec<_>>();
-
-	/* map all path strings to files */
-	let mut outputs = outs.iter().map(|file| {
-		/* of a file is “-”, it is stdout */
-		if *file == "-" {
-			/* portable way to access stdout as a file */
-			return unsafe { File::from_raw_fd(stdout().as_raw_fd()) }; 
-		}
-
-		let options = File::options()
-			/* don’t truncate if -t is specified, append if -a is specified */
-			.truncate(t)
-			.append(a)
-			/* enable the ability to create and write to files */
-			.create(true)
-			.write(true)
-			/* finally, open the file! */
-			.open(file);
-
-		match options {
-			Ok(f) => return f,
-			Err(e) => {
-				eprintln!("{}: {}: {}", argv[0], file, e.strerror());
-				exit(EX_IOERR);
-			},
-		};
-	}).collect::<Vec<_>>();
-
-	/* if -e is specified, use stderr */
-	if e {
-		/* portable way to access stderr as a file */
-		outputs.push(unsafe { File::from_raw_fd(stderr().as_raw_fd()) });
-	}
-
-	let mut outputs = outputs.iter().map(|o| {
-		if u {
-			/* unbuffered writing through a buffer of capacity 0 */
-			BufWriter::with_capacity(0, o)
-		} else {
-			/* theoretically buffered writing */
-			BufWriter::new(o)
-		}
-	}).collect::<Vec<_>>();
-
-	for file in inputs {
-		for byte in file.bytes().map(|b| {
-			b.unwrap_or_else(|e| {
-				eprintln!("{}: {}", argv[0], e.strerror());
-				exit(EX_IOERR);
-			})
-		}) {
-			for out in &mut outputs {
-				if let Err(e) = out.write(&[byte]) {
-					eprintln!("{}: {}", argv[0], e.strerror());
-					return ExitCode::from(EX_IOERR as u8);
-				}
-
-				if u {
-					/* immediately flush the output for -u */
-					if let Err(e) = out.flush() { 
-						eprintln!("{}: {}", argv[0], e.strerror());
-						return ExitCode::from(EX_IOERR as u8);
-					}
-				}
-			}
-		}
-	}
-
-	ExitCode::SUCCESS
-}

src/npc.c

@@ -1,6 +1,5 @@
 /*
  * Copyright (c) 2023 DTB <trinity@trinity.moe>
- * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
  * SPDX-License-Identifier: AGPL-3.0-or-later
  *
  * This program is free software: you can redistribute it and/or modify it under
@@ -17,72 +16,46 @@
  * along with this program. If not, see https://www.gnu.org/licenses/.
  */
 
-#include <stdio.h> /* fprintf(3), fputs(3), getc(3), perror(3), putc(3), stdin,
-                    * stdout, EOF */
-#include <sysexits.h> /* EX_IOERR, EX_OK, EX_OSERR, EX_USAGE */
-#include <unistd.h> /* pledge(2), getopt(3) */
+#include <stdio.h> /* fprintf(3), fputs(3), getc(3), putc(3), stdin, stdout,
+                    * EOF */
+#include <stdlib.h> /* EXIT_FAILURE, EXIT_SUCCESS */
+#include <unistd.h> /* getopt(3) */
+#include <sysexits.h>
 
-char *program_name = "npc";
-
-static int
-ioerr(char *argv0) {
-	perror(argv0);
-
-	return EX_IOERR;
-}
-
-static int
-usage(char *argv0) {
-	(void)fprintf(stderr, "Usage: %s [-et]\n", argv0);
-
-	return EX_USAGE;
-}
-
-int main(int argc, char *argv[]) {
+int main(int argc, char *argv[]){
 	int c;
-	char showend = 0; /* print a dollar sign before each newline */
-	char showtab = 0; /* prints tab characters in caret notation */
+	char showend;
+	char showtab;
 
-#ifdef __OpenBSD__
-	if (pledge("stdio", NULL) == -1) {
-		perror(argv[0] == NULL ? program_name : argv[0]);
-		return EX_OSERR;
-	}
-#endif
+	showend = 0;
+	showtab = 0;
 
-	if (argc > 0) {
-		program_name = argv[0];
-
-		while ((c = getopt(argc, argv, "et")) != -1) {
-			switch (c){
-				case 'e': showend = 1; break;
-				case 't': showtab = 1; break;
-				default:  return usage(program_name);
+	if(argc > 0)
+		while((c = getopt(argc, argv, "et")) != -1)
+			switch(c){
+			case 'e':	showend = 1; break;
+			case 't':	showtab = 1; break;
+			default:	goto usage;
 			}
-		}
+
+	if(argc > optind){
+usage:		fprintf(stderr, "Usage: %s (-eht)\n", argv[0]);
+		return EX_USAGE;
 	}
 
-	if (argc > optind) { return usage(program_name); }
-
-	while ((c = getc(stdin)) != EOF) {
-		if ((c & 0x80) != 0 && fputs("M-", stdout) == EOF) {
-			return ioerr(argv[0]);
-		}
-
-		switch (c ^ 0x80 /* 0b 1000 0000 */) {
-			case 0x7f: /* ASCII DEL (127d) */
-				if(fputs("^?", stdout) == EOF) { return ioerr(argv[0]); }
+	while((c = getc(stdin)) != EOF){
+		if((c & 0x80) != 0)
+			fputs("M-", stdout);
+		switch(c ^ 0x80 /* 0b 1000 0000 */){
+		case 0x7f:	fputs("^?", stdout);
 				break;
-			case '\n':
-				if (showend && fputc('$', stdout) == EOF) {
-					return ioerr(argv[0]);
-				}
-			default:
-				if (c >= ' ' || c == '\n' || (!showtab && c == '\t')) {
-					if (fputc(c, stdout) == EOF) { return ioerr(argv[0]); }
-				} else if (fprintf(stdout, "^%c", c + '@') < 0) {
-					return ioerr(argv[0]);
-				}
+		case '\n':	if(showend)
+					putc('$', stdout);
+		default:
+			if(c >= ' ' || c == '\n' || (!showtab && c == '\t'))
+				putc(c, stdout);
+			else
+				fprintf(stdout, "^%c", c + '@');
 		}
 	}
 

src/peek.c

@@ -1,147 +0,0 @@
-/*
- * Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- */
-
-#include <signal.h> /* sigaction(2), signal(2), struct sigaction, SIGINT */
-#include <stdbool.h> /* bool */
-#include <stdio.h> /* fprintf(3), fgetc(3), perror(3), fputc(3), stderr, stdin,
-                    * stdout, EOF, NULL */
-#include <stdlib.h> /* exit(3), EXIT_FAILURE */
-#include <sysexits.h> /* EX_IOERR, EX_OK, EX_USAGE */
-#include <termios.h> /* tcgetattr(3), tcsetattr(3), struct termios, ECHO */
-#include <unistd.h> /* getopt(3), isatty(3), pledge(2), unveil(2),
-                     * STDIN_FILENO */
-
-char *program_name = "peek";
-
-/* Restores terminal echo; otherwise when a user ^Cs the terminal would
- * continue to not display typed text. If sig isn't zero, this will terminate
- * the program. */
-static void
-restore_echo(int sig) {
-	static struct termios t;
-
-	/* Failure isn't reported because this is the termination routine anyway;
-	 * errors will be obvious. */
-	if (tcgetattr(STDIN_FILENO, &t) == 0) {
-		t.c_lflag |= ECHO;
-		(void)tcsetattr(STDIN_FILENO, TCSAFLUSH, &t);
-	}
-
-	if (sig != 0) { exit(EXIT_FAILURE); } /* Terminated by signal. */
-
-	return;
-}
-
-static int
-ioerr(char *argv0) {
-	perror(argv0);
-	restore_echo(0);
-	return EX_IOERR;
-}
-
-static int
-usage(char *argv0) {
-	(void)fprintf(stderr, "Usage: %s [-i]\n", argv0);
-
-	return EX_USAGE;
-}
-
-int main(int argc, char *argv[]){
-	bool is_term; /* Is stdin a terminal? */
-	bool must_be_term = 1; /* Must it be? */
-
-#ifdef __OpenBSD__
-	if (pledge("stdio tty unveil", "") != 0 || unveil(NULL, NULL) != 0) {
-		/* This isn't fatal; these return values could be cast to void just as
-		 * easily. */
-		(void)perror(argv[0] == NULL ? argv[0] : program_name);
-	}
-#endif
-
-	is_term = isatty(STDIN_FILENO);
-
-	if (argc > 0) { /* option parsing */
-		int c;
-
-		program_name = argv[0];
-
-		while ((c = getopt(argc, argv, "i")) != -1) {
-			switch (c) {
-				case 'i':	must_be_term = 0; break;
-				default:	return usage(argv[0]);
-			}
-		}
-
-		if (argc > optind) { return usage(argv[0]); }
-	}
-
-	if (!is_term && must_be_term) {
-		(void)fprintf(
-		    stderr,
-		    "%s: Must be run in a terminal (specify -i to skip this check)\n",
-		    argv[0]
-		);
-		return EX_USAGE;
-	}
-
-	if (is_term) {
-		{ /* Install signal handler */
-			/* There isn't a difference in functionality between the signal(2)
-			 * and sigaction(2) methods. sigaction(2) is vastly preferred for
-			 * portability but some older systems only have signal(2). */
-			/* Errors aren't terminating because the worst that happens is some
-			 * terminal phooeyness if things go awry. */
-#if defined _POSIX_C_SOURCE
-			struct sigaction act = { 0 };
-
-			act.sa_handler = restore_echo;
-			if (sigaction(SIGINT, &act, NULL) != 0) { perror(program_name); }
-#else
-			if (signal(SIGINT, restore_echo) == SIG_ERR) {
-				perror(program_name);
-			}
-#endif
-		}
-
-		{ /* Banish terminal echo */
-			/* This terminates when it fails because it's the whole point of
-			 * the program. */
-			struct termios t;
-
-			if (tcgetattr(STDIN_FILENO, &t) != 0) {
-				return ioerr(program_name);
-			}
-			t.c_lflag ^= ECHO;
-			if (tcsetattr(STDIN_FILENO, TCSAFLUSH, &t) != 0) {
-				return ioerr(program_name);
-			}
-		}
-	}
-
-	{ /* Input loop */
-		int c;
-
-		while ((c = fgetc(stdin)) != EOF) {
-			if (fputc(c, stdout) == EOF) { return ioerr(program_name); }
-		}
-	}
-
-	if (is_term) { restore_echo(0); }
-
-	return EX_OK;
-}

src/pg.c

@@ -0,0 +1,260 @@
+/*
+ * Copyright (c) 2024 DTB <trinity@trinity.moe>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+#include <errno.h> /* errno */
+#include <stdio.h> /* fclose(3), feof(3), fgetc(3), fgets(3), fopen(3),
+                    * fprintf(3), fputc(3), stderr, stdin, stdout, EOF, FILE,
+                    * NULL */
+#include <stdlib.h> /* size_t */
+#include <string.h> /* strchr(3), strcmp(3), strerror(3), strtok(3) */
+#include <unistd.h> /* getopt(3) */
+
+/* Commands start with cmd_. They take an argc and NULL-terminated argv, like
+ * main, and return a status from <sysexits.h>. Return values other than EX_OK
+ * and EX_USAGE cause pg(1) to exit with that value, except EX_UNAVAILABLE,
+ * which causes pg(1) to exit with the status EX_OK. */
+#include <sysexits.h>
+
+#define CMDLINE_MAX 99+1 /* Maximum length of command line. */
+
+static char *whitespace = " \n\r\t\v";
+
+static struct {
+	size_t quantity;
+	enum { LINES = 0, BYTES = 1 } type;
+} default_page_unit = { 22, LINES } /* Plan 9 default */;
+static FILE *input;
+static char *prompt = ": ";
+static char *program_name = "pg";
+
+static char *permute_out(char *str, size_t index){
+	size_t j;
+
+	for(j = index; str[j - 1] != '\0'; ++j)
+		str[j - 1] = str[j];
+
+	return str;
+}
+
+/* strtok(3p), but supports double-quotes and escapes (but only for escaping
+ * quotes). UTF-8 is safe only in str. Unmatched quotes in str are considered
+ * literal. The behavior of strtok_quoted when '"' or '\\' are in sep is
+ * undefined. */
+/* TODO: Seems to only ever return NULL. */
+static char *strtok_quoted(char *str, char *sep){
+	static char *s;
+	size_t i;
+	size_t j;
+
+	if(str != NULL)
+		s = str;
+
+	while(strchr(sep, *s) == NULL)
+		if(*++s == '\0')
+			return NULL; /* no remaining characters except seperators */
+
+	{
+		char in_escape;
+		int in_quotes;
+
+		in_escape = 0;
+		in_quotes = -1;
+		for(i = 0; s[i] != '\0'; ++i)
+			switch(s[i]){
+			case '\\':
+				if(in_escape)
+					permute_out(s, i--);
+				in_escape = !in_escape;
+				break;
+			case '"':
+				if(in_escape){
+					s[i] = s[i - 1];
+					permute_out(s, i--);
+				}else if(in_quotes != -1){
+					permute_out(s, in_quotes);
+					--i;
+					permute_out(s, i--);
+					in_quotes = -1;
+				}else
+					in_quotes = i;
+				break;
+			case '\0':
+				return s;
+			default:
+				if(!in_escape && strchr(sep, s[i]) != NULL){
+					s[i] = '\0';
+					return s;
+				}
+			}
+	}
+
+	return s;
+}
+
+/* Page at most l bytes from f without consideration of a buffer (print them to
+ * stdout). */
+static int pg_b_u(FILE *f, size_t l){
+	int c;
+
+	while((c = fgetc(f)) != EOF)
+		if((c = fputc(c, stdout)) == EOF || --l == 0)
+			break;
+
+	return c;
+}
+
+/* Page at most l lines, which are lengths of characters terminated by nl, from
+ * f without consideration of a buffer (print them to stdout). */
+static int pg_l_u(FILE *f, size_t l, char nl){
+	int c;
+
+	while((c = fgetc(f)) != EOF)
+		if((c = fputc(c, stdout)) == EOF || (l -= (c == nl)) == 0)
+			break;
+
+	return c;
+}
+
+static int cmd_quit(int argc, char **argv, char **envp){return EX_UNAVAILABLE;}
+static int cmd_default_page(int argc, char **argv, char **envp){
+
+	if(argc > 1) /* This shouldn't be possible. */
+		return EX_USAGE;
+	if(default_page_unit.type == BYTES)
+		return pg_b_u(input, default_page_unit.quantity) == EOF
+			? EX_UNAVAILABLE
+			: EX_OK;
+	else if(default_page_unit.type == LINES)
+		return pg_l_u(input, default_page_unit.quantity, '\n') == EOF
+			? EX_UNAVAILABLE
+			: EX_OK;
+	else
+		return EX_SOFTWARE;
+}
+static int cmd_page_down_lines(int argc, char **argv, char **envp){
+
+	switch(argc){
+	case 1:
+		return cmd_default_page(argc, argv, envp);
+	case 2: /* not implemented */
+	default:
+		fprintf(stderr, "Usage: %s" /*" (lines)"*/ "\n", argv[0]);
+		return EX_USAGE;
+	}
+}
+
+/* A CmdMap must be NULL-terminated. */
+static struct CmdMap{ char *name; int (*fn)(int, char **, char **); }
+builtins[] = {
+	{ "", cmd_default_page },
+	{ "+", cmd_page_down_lines },
+
+	/* don't make the user feel trapped */
+	{ ":q", cmd_quit }, { ":q!", cmd_quit },
+	{ "exit", cmd_quit }, { "q", cmd_quit }, { "Q", cmd_quit },
+	{ "quit", cmd_quit }, { "ZZ", cmd_quit },
+	
+	{ NULL, NULL }
+};
+
+#define ARGV_MAX 10
+/* Find and execute the command in the command map, given a corresponding
+ * command line. */
+static int cmdline_exec(struct CmdMap *map, char *cmdline, char **envp){
+	/* Command line word splitting is naive and based on whitespace ONLY; no
+	 * fancy quoting or escaping here. Adding that would (ideally) entail
+	 * replacing strtok(3) with something specific to this task. */
+	static int argc;
+	static char *argv[ARGV_MAX];
+
+	if((argv[(argc = 0)] = strtok(cmdline, whitespace)) == NULL){
+		while(cmdline[0] != '\0')
+			cmdline = &cmdline[1];
+		argv[argc] = cmdline;
+		argv[++argc] = NULL;
+	}else{
+		while((argv[++argc] = strtok(NULL, whitespace)) != NULL
+		      && argc < ARGV_MAX);
+	}
+
+	for(; map->name != NULL; map = &map[1])
+		if(strcmp(map->name, argv[0]) == 0)
+			return map->fn(argc, argv, envp);
+
+	fprintf(stderr, "%s: %s: not found\n", program_name, argv[0]);
+	return EX_USAGE;
+}
+
+int usage(char *s){
+	fprintf(stderr, "Usage: %s (-p [prompt])\n", s);
+	return EX_USAGE;
+}
+
+int main(int argc, char *argv[]){
+	unsigned char cmd[CMDLINE_MAX];
+	FILE *t;
+
+	input = stdin;
+
+	if(argc < 1)
+		program_name = argv[0];
+	else{
+		int c;
+
+		while((c = getopt(argc, argv, "p:")) != -1)
+			switch(c){
+			case 'p': prompt = optarg; break;
+			default:
+				return usage(program_name);
+			}
+	}
+
+	if(argc > optind)
+		return usage(program_name);
+
+
+	if((t = fopen("/dev/tty", "rb")) == NULL){
+		fprintf(stderr, "%s: /dev/tty: %s\n", program_name, strerror(errno));
+		return EX_OSERR;
+	}
+
+	for(;;){
+		fputs(prompt, stderr);
+		fgets((char *)cmd, (sizeof cmd) / (sizeof *cmd), t);
+		if(strchr((char *)cmd, '\n') == NULL){ /* fast-forward stream */
+			int c;
+
+			while((c = fgetc(t)) != '\n')
+				if(c == EOF)
+					break;
+		}
+
+		if(feof(t))
+			return EX_OK;
+
+		{	int r;
+			switch((r = cmdline_exec(builtins, (char *)cmd, NULL))){
+			case EX_OK: case EX_USAGE: break;
+			case EX_UNAVAILABLE: return EX_OK;
+			default: return r;
+		}	}
+	}
+
+	/* UNREACHABLE */
+	return EX_SOFTWARE;
+}

src/rpn.rs

@@ -56,14 +56,8 @@ extern crate sysexits;
 
 use sysexits::EX_DATAERR;
 
-#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
-#[cfg(target_os="openbsd")] extern crate strerror;
-#[cfg(target_os="openbsd")] extern crate openbsd;
-#[cfg(target_os="openbsd")] use strerror::StrError;
-#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
-
 #[derive(Clone, PartialEq, PartialOrd, Debug)]
-/* enum CalcType is a type containing operations used in the calculator */
+// enum CalcType is a type containing operations used in the calculator
 enum CalcType {
 	Add,
 	Subtract,
@@ -123,8 +117,8 @@ struct EvaluationError {
 	code: i32,
 }
 
-/* I’m no math nerd but I want the highest possible approximation of 0.9
- * repeating and it seems this can give it to me */
+// I’m no math nerd but I want the highest possible approximation of 0.9
+// repeating and it seems this can give it to me
 const PRECISION_MOD: f64 = 0.9 + f64::EPSILON * 100.0;
 
 fn eval(
@@ -139,7 +133,7 @@ fn eval(
 		return Ok((stack, oper));
 	}
 
-	/* Split the input into tokens. */
+	// Split the input into tokens.
 	let mut toks: VecDeque<CalcType> = input
 		.split_whitespace()
 		.rev()
@@ -189,7 +183,7 @@ fn eval(
 	Ok((stack, oper))
 }
 
-/* Round a float to the given precision level */
+// Round a float to the given precision level
 fn round_precise(value: &f64, precision: usize) -> f64 {
 	let multiplier = 10_f64.powi(precision as i32);
 	(value * multiplier).round() / multiplier
@@ -197,22 +191,13 @@ fn round_precise(value: &f64, precision: usize) -> f64 {
 
 fn main() -> ExitCode {
 	let argv = args().collect::<Vec<String>>();
-
-	#[cfg(target_os="openbsd")] {
-		let promises = Promises::new("stdio");
-		if let Err(e) = pledge(Some(promises), None) {
-			eprintln!("{}: {}", argv[0], e.strerror());
-			return ExitCode::from(EX_OSERR as u8);
-		}
-	}
-
 	let mut stack = VecDeque::new();
 	let mut buf = String::new();
-	/* Set floating-point precision for correcting rounding errors based on
-	 * machine epsilon */
+	// Set floating-point precision for correcting rounding errors based on
+	// machine epsilon
 	let precision = (-f64::EPSILON.log10() * PRECISION_MOD).ceil() as usize;
 	
-	if argv.get(1).is_none() { /* read from stdin */
+	if argv.get(1).is_none() {
 		while let Ok(_) = stdin().read_line(&mut buf) {
 			match eval(&buf.trim(), stack) {
 				Ok(s) => {
@@ -234,13 +219,12 @@ fn main() -> ExitCode {
 				},
 			};
 		}
-	} else { /* read from argv */
-		/* join argv into an owned String joined by spaces minus argv[0] */
+	} else {
 		let input = argv
 			.iter()
 			.skip(1)
 			.map(|x| x.to_owned())
-			.collect::<Vec<_>>()
+			.collect::<Vec<String>>()
 			.join(" ");
 
 		match eval(&input, stack) {
@@ -249,7 +233,7 @@ fn main() -> ExitCode {
 
 				let val = match stack.iter().last() {
 					Some(v) => v,
-					None => return ExitCode::SUCCESS,
+					None => return ExitCode::from(0),
 				};
 
 				println!("{}", round_precise(val, precision).to_string())
@@ -260,5 +244,5 @@ fn main() -> ExitCode {
 			},
 		};
 	}
-	ExitCode::SUCCESS
+	ExitCode::from(0)
 }

src/scrut.c

@@ -1,6 +1,5 @@
 /*
- * Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
- * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+ * Copyright (c) 2023 DTB <trinity@trinity.moe>
  * SPDX-License-Identifier: AGPL-3.0-or-later
  *
  * This program is free software: you can redistribute it and/or modify it under
@@ -17,100 +16,89 @@
  * along with this program. If not, see https://www.gnu.org/licenses/.
  */
 
-#include <assert.h> /* assert(3) */
 #include <stdio.h> /* fprintf(3), stderr, NULL */
-#include <stdlib.h> /* EXIT_FAILURE, EXIT_SUCCESS */
+#include <stdlib.h> /* EXIT_FAILURE */
 #include <string.h> /* memset(3), strchr(3) */
-#include <sysexits.h> /* EX_OSERR, EX_USAGE */
-#include <unistd.h> /* access(3), getopt(3), pledge(2), unveil(2), F_OK, R_OK,
-					 * W_OK, X_OK */
+#include <unistd.h> /* access(3), getopt(3), F_OK, R_OK, W_OK, X_OK */
 #include <sys/stat.h> /* lstat(3), stat struct, S_ISBLK, S_ISCHR, S_ISDIR,
                        * S_ISFIFO, S_ISGID, S_ISREG, S_ISLNK, S_ISSOCK,
                        * S_ISUID, S_ISVTX */
+#include <sysexits.h>
 
-char *program_name = "scrut";
-#define OPTS "bcdefgkprsuwxLS"
-/* this is an array so main:sel's size can be known at compile time */
-static char opts[] = OPTS;
+static char args[] = "bcdefghkprsuwxLS";
+static char ops[(sizeof args) / (sizeof *args)];
+static char *program_name = "scrut";
 
-static int
-usage(char *argv0) {
-	(void)fprintf(stderr, "Usage: %s [-" OPTS "] file...\n", argv0);
+int main(int argc, char *argv[]){
+	struct stat buf;
+	int c;
+	size_t i;
+	char *p;
 
-	return EX_USAGE;
-}
-
-int main(int argc, char *argv[]) {
-	char sel[(sizeof opts) / (sizeof *opts)];
-
-	program_name = argv[0] == NULL ? program_name : argv[0];
-
-#ifdef __OpenBSD__
-	if (pledge("rpath stdio unveil", NULL) == -1) {
-		perror(program_name);
-		return EX_OSERR;
-	}
-#endif
-
-	if (argc < 2) { return usage(program_name); }
-
-	{ /* option parsing */
-		char *p;
-
-		memset(sel, '\0', sizeof sel);
-		for (int c; (c = getopt(argc, argv, opts)) != -1;) {
-			if ((p = strchr(opts, c)) == NULL) { return usage(argv[0]); }
-			else {
-				assert(p - opts < sizeof sel / sizeof *sel); /* bounds check */
-				sel[p - opts] = c;
-			}
-		}
-
-		/* straighten out selections; permute out nulls */
-		p = sel;
-		for (size_t i = 0; i < (sizeof sel) / (sizeof *sel); ++i) {
-			if (sel[i] != '\0') {
-				*p = sel[i];
-				if (&sel[i] != p++) { sel[i] = '\0'; }
-			}
-		}
-	}
-
-	if (optind == argc) { return usage(argv[0]); }
-
-	for (argv += optind ; *argv != NULL; argv = &argv[1]) {
-		struct stat buf;
-
-#ifdef __OpenBSD__
-		if (unveil(*argv, "r") == -1) {
-			perror(program_name);
-			return EX_OSERR;
-		}
-#endif
-
-		if(access(*argv, F_OK) != 0 || lstat(*argv, &buf) == -1) {
-			return EXIT_FAILURE; /* doesn't exist or isn't stattable */
-		}
-
-		for (size_t i = 0; sel[i] != '\0'; ++i) {
-			if (
-					(sel[i] == 'b' && !S_ISBLK(buf.st_mode))
-					|| (sel[i] == 'c' && !S_ISCHR(buf.st_mode))
-					|| (sel[i] == 'd' && !S_ISDIR(buf.st_mode))
-					|| (sel[i] == 'e' && 0)
-					|| (sel[i] == 'f' && !S_ISREG(buf.st_mode))
-					|| (sel[i] == 'g' && !(buf.st_mode & S_ISGID))
-					|| (sel[i] == 'k' && !(buf.st_mode & S_ISVTX))
-					|| (sel[i] == 'p' && !S_ISFIFO(buf.st_mode))
-					|| (sel[i] == 'r' && access(*argv, R_OK) != 0)
-					|| (sel[i] == 'u' && !(buf.st_mode & S_ISUID))
-					|| (sel[i] == 'w' && access(*argv, W_OK) != 0)
-					|| (sel[i] == 'x' && access(*argv, X_OK) != 0)
-					|| (sel[i] == 'L' && !S_ISLNK(buf.st_mode))
-					|| (sel[i] == 'S' && !S_ISSOCK(buf.st_mode))
-			) { return EXIT_FAILURE; }
-		}
-	}
-
-	return EXIT_SUCCESS;
+	if(argc < 2)
+		goto usage;
+
+	memset(ops, '\0', sizeof ops);
+	while((c = getopt(argc, argv, args)) != -1)
+		if((p = strchr(args, c)) == NULL)
+			goto usage;
+		else
+			ops[p - args] = c;
+	/* straighten out ops */
+	for(i = 0, p = ops; i < (sizeof ops) / (sizeof *ops); ++i)
+		if(ops[i] != '\0'){
+			*p = ops[i];
+			if(&ops[i] != p++)
+				ops[i] = '\0';
+		}
+
+	if(optind == argc)
+		goto usage;
+
+	argv += optind;
+	do{	if(access(*argv, F_OK) != 0 || lstat(*argv, &buf) == -1)
+			return 1; /* doesn't exist or isn't stattable */
+
+		for(i = 0; ops[i] != '\0'; ++i)
+			if(ops[i] == 'e')
+				continue;
+			else if(ops[i] == 'h'){
+usage:				fprintf(stderr, "Usage: %s (-%s) [file...]\n",
+					argv[0] == NULL
+						? program_name
+						: argv[0],
+					args);
+
+				return EX_USAGE;
+			}else if(
+					(ops[i] == 'b'
+						&& !S_ISBLK(buf.st_mode))
+					|| (ops[i] == 'c'
+						&& !S_ISCHR(buf.st_mode))
+					|| (ops[i] == 'd'
+						&& !S_ISDIR(buf.st_mode))
+					|| (ops[i] == 'f'
+						&& !S_ISREG(buf.st_mode))
+					|| (ops[i] == 'g'
+						&& !(buf.st_mode & S_ISGID))
+					|| (ops[i] == 'k'
+						&& !(buf.st_mode & S_ISVTX))
+					|| (ops[i] == 'p'
+						&& !S_ISFIFO(buf.st_mode))
+					|| (ops[i] == 'r'
+						&& access(*argv, R_OK) != 0)
+					|| (ops[i] == 'u'
+						&& !(buf.st_mode & S_ISUID))
+					|| (ops[i] == 'w'
+						&& access(*argv, W_OK) != 0)
+					|| (ops[i] == 'x'
+						&& access(*argv, X_OK) != 0)
+					|| (ops[i] == 'L'
+						&& !S_ISLNK(buf.st_mode))
+					|| (ops[i] == 'S'
+						&& !S_ISSOCK(buf.st_mode)))
+				return 1;
+	}while(*++argv != NULL);
+
+	return 0;
 }

src/str.c

@@ -19,21 +19,17 @@
 
 #include <ctype.h>
 #include <stddef.h> /* NULL */
-#include <stdio.h> /* fprintf(3), perror(3) */
-#include <stdlib.h> /* size_t, EXIT_FAILURE */
+#include <stdio.h> /* fprintf(3) */
+#include <stdlib.h> /* EXIT_FAILURE */
 #include <string.h> /* strcmp(3) */
-#include <sysexits.h> /* EX_OSERR, EX_USAGE */
+#include <sysexits.h>
 
-#ifdef __OpenBSD__
-#	include <unistd.h> /* pledge(2) */
-#endif
-
-char *program_name = "str";
+static char *program_name = "str";
 
 static struct {
 	char *name;
 	int (*f)(int);
-} ctypes[] = {
+}ctypes[] = {
 	{ "isalnum", isalnum },
 	{ "isalpha", isalpha },
 	{ "isblank", isblank },
@@ -45,52 +41,35 @@ static struct {
 	{ "isprint", isprint },
 	{ "ispunct", ispunct },
 	{ "isspace", isspace },
-	{ "isupper", isupper },
-	{ NULL, NULL } /* marks end */
+	{ "isupper", isupper }
 };
 
-static int
-usage(char *argv0) {
-	(void)fprintf(stderr, "Usage: %s type string...\n", argv0);
+int main(int argc, char *argv[]){
+	int ctype;
+	int i;
+	int r;
+
+	if(argc >= 3){
+		for(ctype = 0; ctype < (sizeof ctypes) / (sizeof *ctypes);
+				++ctype)
+			if(strcmp(argv[1], ctypes[ctype].name) == 0)
+				goto pass;
+	}
+
+	fprintf(stderr, "Usage: %s [type] [string...]\n",
+		argv[0] == NULL ? program_name : argv[0]);
 
 	return EX_USAGE;
-}
-
-int main(int argc, char *argv[]) {
-	size_t ctype; // selected from ctypes.h; index of ctype
-	int retval; // initially fail but becomes success on the first valid char
-	program_name = argv[0] == NULL ? program_name : argv[0];
-
-#ifdef __OpenBSD__
-	if (pledge("stdio", NULL) == -1) {
-		perror(program_name);
-		return EX_OSERR;
-	}
-#endif
-
-	if (argc < 3) { return usage(program_name); }
-
-	for ( /* iterate ctypes */
-		ctype = 0;
-		ctypes[ctype].f != NULL /* break at the end of ctypes */
-			&& strcmp(argv[1], ctypes[ctype].name) != 0; /* break at match */
-		++ctype
-	);
-
-	if (ctypes[ctype].f == NULL) { return usage(argv[0]); }
-
-	/* iterate args */
-	for (argv += 2, retval = EXIT_FAILURE; *argv != NULL; ++argv) {
-		for (size_t i = 0; argv[0][i] != '\0'; ++i) { /* iterate arg bytes */
-			/* First checks if argv[0][i] is valid ASCII; ctypes(3) don't
-			 * handle non-ASCII. This is bad. */
-			if(
-				(unsigned char)argv[0][i] < 0x80 // argv[0][i] is ASCII,
-					&& !ctypes[ctype].f(argv[0][i]) // so use ctypes(3)
-			) { return EXIT_FAILURE; }
-			else { retval = EXIT_SUCCESS; }
-		}
-	}
-
-	return retval;
+
+pass:	for(argv += 2, r = 1; *argv != NULL; ++argv)
+		for(i = 0; argv[0][i] != '\0'; ++i)
+			/* First checks if argv[0][i] is valid ASCII; ctypes(3)
+			 * don't handle non-ASCII.
+			 * This is bad. */
+			if((unsigned char)argv[0][i] < 0x80 && !ctypes[ctype].f(argv[0][i]))
+				return 1;
+			else
+				r = 0;
+
+	return r;
 }

src/strcmp.c

@@ -1,62 +1,24 @@
-/*
- * Copyright (c) 2023 DTB <trinity@trinity.moe>
- * Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- */
-#include <stdio.h> /* fprintf(3), perror(3), stderr */
-#include <sysexits.h> /* EX_OK, EX_OSERR, EX_USAGE */
+#include <stdio.h> /* fprintf(3), stderr */
+#include <stdlib.h> /* EXIT_FAILURE */
+#include <sysexits.h>
 
-#ifdef __OpenBSD__
-#	include <unistd.h> /* pledge(2) */
-#endif
+static char *program_name = "strcmp";
 
-char *program_name = "strcmp";
-
-int main(int argc, char *argv[]) {
-	unsigned int i;
-
-#ifdef __OpenBSD__
-	if (pledge("stdio", NULL) == -1) {
-		perror(argv[0] == NULL ? program_name : argv[0]);
-
-		return EX_OSERR;
-	}
-#endif
-
-	if (argc < 3) {
-		(void)fprintf(
-			stderr,
-			"Usage: %s string string...\n",
-			argv[0] == NULL ? program_name : argv[0]
-		);
+int main(int argc, char *argv[]){
+	int i;
 
+	if(argc < 3){
+		fprintf(stderr, "Usage: %s [string] [string...]\n",
+			argv[0] == NULL ? program_name : argv[0]);
 		return EX_USAGE;
 	}
 
-	for (; *argv[1] != '\0'; ++argv[1]) {
-		for (i = 2; i < argc; ++i) {
-			/* a former string has a greater byte value */
-			if (*argv[i-1] > *argv[i]) { 
+	for(; *argv[1] != '\0'; ++argv[1])
+		for(i = 2; i < argc; ++i)
+			if(*argv[i-1] > *argv[i])
 				return 1;
-			/* a latter string has a greater byte value */
-			} else if (*argv[i-1] < *argv[i]++) {
+			else if(*argv[i-1] < *argv[i]++)
 				return -1; /* actually 255 */
-			}
-		}
-	}
 
-	return EX_OK;
+	return 0;
 }

src/swab.rs

@@ -1,6 +1,5 @@
 /*
  * Copyright (c) 2024 DTB <trinity@trinity.moe>
- * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
  * SPDX-License-Identifier: AGPL-3.0-or-later
  *
  * This program is free software: you can redistribute it and/or modify it under
@@ -19,90 +18,72 @@
 
 use std::{
 	env::args,
-	io::{ stdin, stdout, Error, Read, Write },
+	io::{ stdin, stdout, Error, ErrorKind, Read, Write },
 	process::ExitCode,
 	vec::Vec
 };
 
 extern crate getopt;
+use getopt::{ Opt, Parser };
+
 extern crate sysexits;
-extern crate strerror;
+use sysexits::{ EX_OK, EX_OSERR, EX_USAGE };
 
-use getopt::GetOpt;
-use sysexits::{ EX_IOERR, EX_OK, EX_OSERR, EX_USAGE };
-use strerror::StrError;
-
-#[cfg(target_os="openbsd")] extern crate openbsd;
-#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
-
-
-fn oserr(argv0: &str, e: Error) -> ExitCode {
-	eprintln!("{}: {}", argv0, e.strerror());
+fn oserr(s: &str, e: Error) -> ExitCode {
+	eprintln!("{}: {}", s, e);
 	ExitCode::from(EX_OSERR as u8)
 }
 
-fn ioerr(argv0: &str, e: Error) -> ExitCode {
-	eprintln!("{}: {}", argv0, e.strerror());
-	ExitCode::from(EX_IOERR as u8)
-}
-
 fn usage(s: &str) -> ExitCode {
-	eprintln!("Usage: {} [-w word_size]", s);
+	eprintln!("Usage: {} (-f) (-w [wordsize])", s);
 	ExitCode::from(EX_USAGE as u8)
 }
 
 fn main() -> ExitCode {
 	let argv = args().collect::<Vec<String>>();
-	
-	#[cfg(target_os="openbsd")] {
-		let promises = Promises::new("stdio");
-		if let Err(e) = pledge(Some(promises), None) {
-			return oserr(&argv[0], e);
-		}
-	}
-
-	let mut buf: Vec<u8> = Vec::new(); // holds the sequence getting swabbed
+	let mut buf: Vec<u8> = Vec::new();
 	let mut input = stdin();
 	let mut output = stdout().lock();
-	let mut optind: usize = 1;   // argv[0]
-	let mut wordsize: usize = 2; // default; mimics dd(1p) conv=swab
 
-	while let Some(opt) = argv.getopt("w:") {
-		match opt.opt() {
-			Ok("w") => {
-					match opt.arg().unwrap().parse::<usize>() {
-						Ok(w) if w % 2 == 0 => { wordsize = w; },
-						_ => { return usage(&argv[0]); },
-					}
-				optind = opt.ind();
-			},
-			_ => { return usage(&argv[0]); }
+	let mut opts = Parser::new(&argv, "fw:");
+	let mut force = false;
+	let mut wordsize: usize = 2;
+
+	loop {
+		match opts.next() {
+			None => break,
+			Some(opt) =>
+				match opt {
+					Ok(Opt('f', None)) => force = true,
+					Ok(Opt('w', Some(arg))) => {
+						match arg.parse::<usize>() {
+							Ok(w) if w % 2 == 0 => { wordsize = w; () },
+							_ => { return usage(&argv[0]); },
+						}
+					},
+					_ => { return usage(&argv[0]); }
+				}
 		}
 	}
 
-	if optind < argv.len() {
-		return usage(&argv[0]);
-	}
-
 	buf.resize(wordsize, 0);
 
 	loop {
 		match input.read(&mut buf) {
-			Ok(0) => break ExitCode::from(EX_OK as u8), // read nothing; bye
-			Ok(v) if v == wordsize => { // read full block; swab
+			Ok(0) => break ExitCode::from(EX_OK as u8),
+			Ok(v) if v == wordsize => {
 				let (left, right) = buf.split_at(v/2);
-
 				if let Err(e) = output.write(&right)
 						.and_then(|_| output.write(&left)) {
-					break ioerr(&argv[0], e);
+					break oserr(&argv[0], e)
 				}
-
 			},
-			Ok(v) => { // partial read; partially write
+			Ok(v) => {
 				if let Err(e) = output.write(&buf[..v]) {
-					break ioerr(&argv[0], e);
+					break oserr(&argv[0], e)
 				}
 			},
+			Err(e) if e.kind() == ErrorKind::Interrupted && force => continue,
 			Err(e) => break oserr(&argv[0], e)
 		}
 	}

src/test.rs

@@ -0,0 +1,10 @@
+extern crate strerror;
+
+use strerror::raw_message;
+
+fn main() {
+	stdout.write_all(b"meow\n").unwrap_or_else(|e| {
+		eprintln!("{}", raw_message(e));
+		std::process::exit(1);
+	});
+}

src/true.c

@@ -1,18 +1,9 @@
 /*
- * Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
- * Copyright (c) 2024 DTB <trinity@trinity.moe>
+ * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
  * SPDX-License-Identifier: CC0
  *
  * This work is marked with CC0 1.0. To view a copy of this license, visit
  * <http://creativecommons.org/publicdomain/zero/1.0>.
  */
 
-#ifdef __OpenBSD__
-#	include <unistd.h> /* pledge(2) */
-#endif
-
-int main(void) {
-#ifdef __OpenBSD__
-	pledge(NULL, NULL);
-#endif
-}
+int main() {}

tests/README

@@ -1,36 +0,0 @@
-The testing suite contains two trees: the Bonsai tree and the POSIX tree:
-
-.
-├── README
-├── bonsai/
-│   ├── dj.mk
-│   ├── false.mk
-│   ├── fop.mk
-│   └── ...
-├── posix/
-└── tests.mk
-
-The Bonsai tree tests the functionality of Harakit utilities for regressions and
-other issues relating to compliance to our standards of practice.
-
-The POSIX tests are currently a work-in-progress. Their status in this
-repository is uncertain.
-
-Both sets of tests also inherit the environment set by the top-level Makefile,
-which sets the BIN variable to the build/bin directory at the root of the
-project; therefore, each binary is located at $(BIN)/tool for idiomatic access.
-
-Each test contains a set of PHONY targets which are prefixed with the name of
-the tool being tested and an underscore. The first target is tests, which
-depends on all the other targets in the test file. These test files are each
-included in the top Makefile, so they can be called from the root of the
-repository. This also means that BIN can be set manually so that tests can be
-run using make(1) inside of the tests directory:
-
-	$ make -f tests.mk BIN=../build/bin dj_tests
-
---
-Copyright © 2024 Emma Tebibyte <emma@tebibyte.media>
-
-This work is licensed under CC BY-SA 4.0. To view a copy of this license, visit
-<http://creativecommons.org/licenses/by-sa/4.0/>.

tests/bonsai/dj.mk

@@ -1,48 +0,0 @@
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PRAGMA: command_comment
-
-/dev/full:
-/dev/null:
-
-.PHONY: dj_tests
-dj_tests: dj_help dj_full dj_null # dj_skip_stdin
-
-.PHONY: dj_full
-# Linux has a /dev/full pseudodevice useful for testing errors.
-dj_full: $(BIN)/dj /dev/full
-	case "$$(uname)" in \
-	Linux) \
-		! $(BIN)/dj -Hi /dev/zero -o /dev/full 2>&1 \
-			| tee /dev/stderr \
-			| xargs -I out test '1+0 > 0+0; 1024 > 0' = out \
-		;; \
-	esac
-
-.PHONY: dj_help
-dj_help: $(BIN)/dj
-	! $(BIN)/dj -h
-
-.PHONY: dj_null
-# Read nothing from /dev/null, write nothing to /dev/null.
-dj_null: $(BIN)/dj /dev/null
-	$(BIN)/dj -Hi /dev/null -o /dev/null 2>&1 \
-		| tee /dev/stderr \
-		| xargs -I out test '0+0 > 0+0; 0 > 0' = out
-
-# This test currently fails. This is probably due to dj(1) being stale relative
-# to the main harakit branch. TODO: Reassess once the testing branch is merged.
-# .PHONY: dj_skip_stdin
-# # Test skipping stdin.
-# dj_skip_stdin: $(BIN)/dj
-# 	# Pipe 1024B of '\0' into dj(1); skip the first 24B; expect 1000B written.
-# 	dd count=1 bs=1024 </dev/zero 2>/dev/null \
-# 		| $(BIN)/dj -H -s 24 -o /dev/null 2>&1 \
-# 		| tee /dev/stderr \
-# 		| xargs -I out test '1+0 > 1+0; 1024 > 1000' = out

tests/bonsai/false.mk

@@ -1,18 +0,0 @@
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PHONY: false_tests
-false_tests: false_test false_help
-
-.PHONY: false
-false_test: $(BIN)/false
-	! $(BIN)/false
-
-.PHONY: false_help
-false_help: $(BIN)/false
-	! $(BIN)/false -h

tests/bonsai/fop.mk

@@ -1,31 +0,0 @@
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PHONY: fop_tests
-fop_tests: fop_functionality fop_delimiter fop_help fop_fail
-
-.PHONY: fop_help
-fop_help: $(BIN)/fop
-	! $(BIN)/fop -h
-
-.PHONY: fop_delimiter
-fop_delimiter: $(BIN)/fop
-	test "$$(printf 'test1 test1 test1\n' | $(BIN)/fop -d' ' 2 sed 's/1/4/g')" \
-		= 'test1 test1 test4'
-	test "$$(printf 'meowsetwoofsetribbit\n' \
-		| $(BIN)/fop -d 'set' 1 sed 's/woof/meow/g')" = 'meowsetmeowsetribbit'
-
-.PHONY: fop_fail
-fop_fail: $(BIN)/fop
-	! printf 'test\n' | $(BIN)/fop 1 cat
-	! printf 'test\n' | $(BIN)/fop 'test' cat
-	! printf 'test\n' | $(BIN)/fop -d'test' cat
-
-.PHONY: fop_functionality
-fop_functionality: $(BIN)/fop
-	test "$$(printf 'test1\036test1\036test1\n' | $(BIN)/fop 1 sed 's/1/4/g')" \
-		= "$$(printf 'test1\036test4\036test1\n')"

tests/bonsai/hru.mk

@@ -1,32 +0,0 @@
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PHONY: hru_tests
-hru_tests: hru_help hru_functionality hru_negative hru_regressions
-
-.PHONY: hru_help
-hru_help: $(BIN)/hru
-	! $(BIN)/hru -h
-
-.PHONY: hru_functionality
-hru_functionality: $(BIN)/hru
-	test "$$(printf '1234\n' | $(BIN)/hru)" = '1.2 kB'
-	test "$$(printf '0\n' | $(BIN)/hru)" = '0 B'
-
-.PHONY: hru_negative
-hru_negative: $(BIN)/hru
-	! printf '%s\n' '-1' | $(BIN)/hru
-
-.PHONY: hru_regressions
-hru_regressions: $(BIN)/hru
-	n=1; \
-	while true; \
-	do \
-		printf '%s\n' "$$n" | $(BIN)/hru || break; \
-		n="$$(($$n * 10))"; \
-	done; \
-	printf 'Max float: %s\n' "$$n"

tests/bonsai/intcmp.mk

@@ -1,67 +0,0 @@
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PHONY: intcmp_tests
-intcmp_tests: intcmp_help intcmp_none intcmp_e intcmp_g intcmp_l intcmp_combined
-
-.PHONY: intcmp_help
-intcmp_help: $(BIN)/intcmp
-	! $(BIN)/intcmp -h
-
-# These test that integer comparisons are working as they should. For the sake
-# of readability (to facilitate faster skimming) these recipes follow a
-# columned format:
-#	$binary       -flags d d d d  # op
-# For flag meanings reference intcmp(1) (though they are somewhat self
-# explanatory). d here refers to a decimal number; a mixture of 1s, 2s, and 3s
-# (a particularly lovely number) arranged to demonstrate easily the operation
-# under scrutiny. The commented op is the operation that is true for the given
-# numbers. For example:
-#	$(BIN)/intcmp   -e   3 3 3 3  # ==
-# op here is ==; 3 == 3 == 3 == 3. The flag being used is -e, to test for
-# equality, so this test should succeed.
-#	! $(BIN)/intcmp -l   3 2 1    # >
-# op here is >; 3 > 2 > 1. The flag being used is -l, to test for each integer
-# being less than the next, so intcmp should fail - hence the ! at the start of
-# the invocation. If this test failed, intcmp(1) would be confusing -l for -g,
-# so that would be a good place to start looking for bugs.
-
-.PHONY: intcmp_none
-intcmp_none: $(BIN)/intcmp
-	! $(BIN)/intcmp 1 2
-
-.PHONY: intcmp_e
-intcmp_e: $(BIN)/intcmp
-	$(BIN)/intcmp   -e   3 3 3    # ==
-	! $(BIN)/intcmp -e   1 2 3    # <
-	! $(BIN)/intcmp -e   3 2 1    # >
-
-.PHONY: intcmp_g
-intcmp_g: $(BIN)/intcmp
-	$(BIN)/intcmp   -g   3 2 1    # >
-	! $(BIN)/intcmp -g   3 3 3    # ==
-	! $(BIN)/intcmp -g   1 2 3    # <
-	$(BIN)/intcmp   -ge  3 3 1    # >=
-	! $(BIN)/intcmp -ge  1 2 3    # <
-
-.PHONY: intcmp_l
-intcmp_l: $(BIN)/intcmp
-	$(BIN)/intcmp   -l   1 2 3    # <
-	! $(BIN)/intcmp -l   3 3 3    # ==
-	! $(BIN)/intcmp -l   3 2 1    # >
-	$(BIN)/intcmp   -le  1 3 3    # <=
-	! $(BIN)/intcmp -le  3 2 1    # >
-
-.PHONY: intcmp_combined
-intcmp_combined: $(BIN)/intcmp
-	$(BIN)/intcmp   -gl  1 2 3    # <
-	$(BIN)/intcmp   -gl  3 2 1    # >
-	$(BIN)/intcmp   -gl  1 3 1    # !=
-	! $(BIN)/intcmp -gl  3 3 3    # ==
-	$(BIN)/intcmp   -egl 3 1 1 3  # >, ==, <
-	! $(BIN)/intcmp -egl foo      # huh?

tests/bonsai/mm.mk

@@ -1,34 +0,0 @@
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PHONY: mm_tests
-mm_tests: mm_args mm_help mm_stderr mm_remaining
-
-.PHONY: mm_none
-mm_none: $(BIN)/mm
-	test "$$(printf 'meow\n' | $(BIN)/mm)" = meow
-
-.PHONY: mm_args
-# mm(1) will error if positional arguments are given without -i or -o
-mm_args: $(BIN)/mm
-	! $(BIN)/mm argument
-
-.PHONY: mm_help
-mm_help: $(BIN)/mm
-	! $(BIN)/mm -h
-
-.PHONY: mm_stderr
-# check if stderr is empty upon specifying -e
-mm_stderr: $(BIN)/mm
-	test "$$(printf 'test\n' | $(BIN)/mm -e 2>&1 >/dev/null )" = "test"
-
-.PHONY: mm_remaining
-# check to make sure remaining arguments are used
-mm_remaining: $(BIN)/mm
-	test "$$($(BIN)/mm -i README COPYING)" = "$$(cat README COPYING)"
-	$(BIN)/mm -i README -o /tmp/mm_test0 /tmp/mm_test1
-	diff /tmp/mm_test0 /tmp/mm_test1

tests/bonsai/npc.mk

@@ -1,90 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PRAGMA: command_comment
-
-.PHONY: npc_tests
-npc_tests: npc_help npc_args npc_ascii
-
-.PHONY: npc_help
-npc_help: $(BIN)/npc
-	! $(BIN)/npc -h
-
-.PHONY: npc_args
-# arg parsing
-npc_args:
-	$(BIN)/npc -e </dev/null
-	$(BIN)/npc -t </dev/null
-	$(BIN)/npc -et </dev/null
-	! $(BIN)/npc -et 5 </dev/null
-
-.PHONY: npc_ascii
-# Test 0x00 to 0x7f in input; in other words, the full 7b ASCII range.
-npc_ascii: npc_ascii_controls npc_ascii_symbols npc_ascii_uppers # \
-#	npc_ascii_lowers
-
-.PHONY: npc_ascii_controls
-# (control characters)
-npc_ascii_controls:
-	# The following test prints the bytes 0x00 (inclusive) through 0x20
-	# (exclusive) and pipes them through npc(1). npc(1) should then replace all
-	# non-printing, non-space (in the isspace(3p) sense) characters with their
-	# graphical carat-char counterparts (see the npc(1) man page). The head(1p)
-	# invocation then strips off everything past the first line (or past the
-	# first newline byte, 0x0A) and xargs(1p) is used to test(1p) the output
-	# against the known good answer.
-
-	# Immediately before that newline, 0x09 is printed - in ASCII, the
-	# horizontal tab. If xargs' -I option is used, tr(1p) should used to delete
-	# that tab. If the tab is left as part of input, OpenBSD's xargs(1)
-	# implementation has been observed to strip it along with the other
-	# trailing whitespace (the newline), but Busybox's and GNU's xargs(1)
-	# implementations have been observed to leave the tab in. All three
-	# implementations strip off the trailing tab if `-I` is not used. The POSIX
-	# specification for `-I` is ambiguous as to which behavior is correct.
-	# This comment is the result of much bewilderment and debugging.
-
-	# ASCII 0x00 to 0x0a (before the newline, due to xargs(1p) issues)
-	awk 'BEGIN{ for (i = 0; i < 32; ++i) printf("%c", i); }' \
-		| $(BIN)/npc \
-		| head -n 1 \
-		| xargs test "^@^A^B^C^D^E^F^G^H" =
-
-	# ASCII 0x0a (otherwise the head|tail sequence won't work) to 0x1f
-	awk 'BEGIN{ for (i = 0; i < 32; ++i) printf("%c", i); print }' \
-		| $(BIN)/npc \
-		| head -n 2 \
-		| tail -n 1 \
-		| xargs -I out test "^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_"
-
-.PHONY: npc_ascii_symbols
-# ASCII 0x1f to 0x3f (^_ and symbols)
-npc_ascii_symbols:
-	# shell quoting olympics
-	awk 'BEGIN{ for (i = 31; i < 64; ++i) printf("%c", i); print }' \
-		| $(BIN)/npc \
-		| sed -e s"/\'/\\\'/g" -e 's/"/\\"/g' \
-		| xargs -I out test "^_ !\"#$$%&'()*+,-./0123456789:;<=>?" = out
-
-.PHONY: npc_ascii_uppers
-# ASCII 0x40 to 0x5f (uppercases)
-npc_ascii_uppers:
-	awk 'BEGIN{ for (i = 64; i < 96; ++i) printf("%c", i); print }' \
-		| $(BIN)/npc \
-		| sed 's/\\/\\\\/' \
-		| xargs -I out test @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_ = out
-
-# This test is broken and will need closer inspection along with the npc(1)
-# source.
-# .PHONY: npc_ascii_lowers
-# # ASCII 0x60 to 0x7f (lowercases)
-# npc_ascii_lowers:
-# 	awk 'BEGIN{ for (i = 96; i < 128; ++i) printf("%c", i); print }' \
-# 		| $(BIN)/npc \
-# 		| xargs -I out test "\`abcdefghijklmnopqrstuvwxyz{|}~^?" = out

tests/bonsai/peek.mk

@@ -1,24 +0,0 @@
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-# Testing peek is hard as it requires visual confirmation that text isn't being
-# echoed. These tests don't go that far but are a start, and have already
-# caught a bug in -i behavior.
-
-.PHONY: peek_tests
-peek_tests: peek_help peek_stdio
-
-.PHONY: peek_help
-peek_help: $(BIN)/peek
-	! $(BIN)/peek -h
-
-.PHONY: peek_stdio
-# Test peek -i
-peek_stdio: $(BIN)/peek
-	printf 'Test.\n' \
-		| $(BIN)/peek -i \
-		| xargs test 'Test.' =

tests/bonsai/rpn.mk

@@ -1,43 +0,0 @@
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PHONY: rpn_tests
-rpn_tests: rpn_help rpn_add rpn_sub rpn_mul rpn_div rpn_mod rpn_flr
-
-.PHONY: rpn_help
-rpn_help: $(BIN)/rpn
-	! $(BIN)/rpn -h
-
-.PHONY: rpn_add
-rpn_add: $(BIN)/rpn
-	test "$$($(BIN)/rpn 1 2 +)" -eq 3
-	test "$$($(BIN)/rpn 0.2 0.1 +)" = 0.3
-
-.PHONY: rpn_sub
-rpn_sub: $(BIN)/rpn
-	test "$$($(BIN)/rpn 23 5 -)" -eq 18
-	test "$$($(BIN)/rpn 0.3 0.1 -)" = 0.2
-
-.PHONY: rpn_mul
-rpn_mul: $(BIN)/rpn
-	test "$$($(BIN)/rpn 1.2 3 '*')" = 3.6
-	test "$$($(BIN)/rpn 0 3 '*')" -eq 0
-
-.PHONY: rpn_div
-rpn_div: $(BIN)/rpn
-	test "$$($(BIN)/rpn 12 5 /)" = 2.4
-	test "$$($(BIN)/rpn 3 0 /)" = inf
-
-.PHONY: rpn_mod
-rpn_mod: $(BIN)/rpn
-	test "$$($(BIN)/rpn 12 5 %)" -eq 2
-	test "$$($(BIN)/rpn 9 4 %)" -eq 1
-
-.PHONY: rpn_flr
-rpn_flr: $(BIN)/rpn
-	test "$$($(BIN)/rpn 12 5 //)" -eq 2
-	test "$$($(BIN)/rpn 9 4 //)" -eq 2

tests/bonsai/scrut.mk

@@ -1,46 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PRAGMA: command_comment
-
-.PHONY: scrut_tests
-scrut_tests: scrut_help scrut_options
-
-.PHONY: scrut_help
-scrut_help: $(BIN)/scrut
-	! $(BIN)/scrut -h
-
-.PHONY: scrut_options
-# scrut tests file attributes, but files of a certain attribute aren't
-# guaranteed to be present on a system. This test checks all of the files in
-# harakit and, if test(1p) says a file matches a certain attribute, then checks
-# scrut.
-# opts are space-delimited (for command splitting), sel is not
-scrut_options: $(BIN)/scrut
-	set -e; \
-	opts="b c d e f g k p r s u w x L S"; \
-	sel=; \
-	find . -name .git -prune -o -print \
-		| while read -r f; do \
-			for opt in $$opts; \
-				do if ! printf "%s\n" $$sel | grep $$opt >/dev/null; then \
-					if test -$$opt "$$f"; then \
-						if ! $(BIN)/scrut -$$opt "$$f"; \
-							then printf "[!!] scrut -%s failed on %s.\n" \
-								$$opt "$$f"; \
-						fi; \
-						sel="$$sel$$opt"; \
-						printf "[OK] Tested scrut -%s using %s\n" \
-							$$opt "$$f"; \
-					fi; \
-				fi; \
-			done; \
-			if printf "%s\n" "$$opts" | sed 's/ //g' | xargs test "$$sel" =; \
-				then break; \
-			fi; \
-		done

tests/bonsai/str.mk

@@ -1,20 +0,0 @@
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PRAGMA: command_comment
-
-.PHONY: str_tests
-str_tests: str_help str_isalpha
-
-.PHONY: str_help
-str_help: $(BIN)/str
-	! $(BIN)/str -h
-
-.PHONY: str_isalpha
-str_isalpha: $(BIN)/str
-	$(BIN)/str   isalpha c
-	! $(BIN)/str isalpha 3

tests/bonsai/strcmp.mk

@@ -1,31 +0,0 @@
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-NAME = strcmp
-TARGET = $(NAME)_tests
-BINARY = $(BIN)/$(NAME)
-
-.PHONY: strcmp_tests
-strcmp_tests: strcmp_equals strcmp_help strcmp_nocmp strcmp_unequals
-
-.PHONY: strcmp_equals
-strcmp_equals: $(BIN)/strcmp
-	$(BIN)/strcmp equals equals
-	$(BIN)/strcmp - -
-
-.PHONY: strcmp_help
-strcmp_help: $(BIN)/strcmp
-	! $(BIN)/strcmp -h
-
-.PHONY: strcmp_nocmp
-strcmp_nocmp: $(BIN)/strcmp
-	! $(BIN)/strcmp nocmp
-
-.PHONY: strcmp_unequals
-strcmp_unequals: $(BIN)/strcmp
-	! $(BIN)/strcmp unequals equals

tests/bonsai/swab.mk

@@ -1,22 +0,0 @@
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PRAGMA: command_comment
-
-.PHONY: swab_tests
-swab_tests: swab_help swab_examples
-
-.PHONY: swab_help
-swab_help: $(BIN)/swab
-	! $(BIN)/swab -h
-
-.PHONY: swab_examples
-# These are the examples present in the man page.
-swab_examples: $(BIN)/swab
-	printf 'hello world!\n' \
-		| $(BIN)/swab \
-		| xargs -I out test 'ehll oowlr!d' = out

tests/bonsai/true.mk

@@ -1,19 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-.PHONY: true_tests
-true_tests: true_test
-
-.PHONY: true_help
-true_help: $(BIN)/true
-	$(BIN)/true -h
-
-.PHONY: true_test
-true_test: $(BIN)/true
-	$(BIN)/true

tests/posix-compat.sh

@@ -0,0 +1,24 @@
+#!/bin/sh
+
+# Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+set -e
+
+if ! ls Makefile >/dev/null 2>&1
+then
+	printf '%s: Run this script in the root of the project.\n' "$0" 1>&2 
+	exit 1
+fi
+
+printf "Starting POSIX compatibility testing.\n"
+
+for utility in tests/posix/*; do
+	printf '%s: %s: Testing utility.\n' "$0" "$utility"
+	"$utility"
+	printf '\n'
+done

tests/posix/bin/cat

@@ -1,22 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-# Strictly POSIX-compliant cat(1) implementation. See cat(1p)
-
-for arg in "$@"; do
-	case "$arg" in
-		-u) args="$(printf '%s	%s\n' "$args" "$arg")" ;;
-		*) args="$(printf -- '%s	-i	%s\n' "$args" "$arg")" ;;
-	esac
-done
-
-# See IEEE Std 1003.1-2017 3.282
-# https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_282
-IFS='	'
-
-mm $args

tests/posix/bin/false

@@ -1,12 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-# Strictly POSIX-compliant false(1) implementation. See false(1p)
-
-false "$@"

tests/posix/bin/true

@@ -1,11 +0,0 @@
-#!/bin/sh
-# Copyright (c) 2024 DTB <trinity@trinity.moe>
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-# Strictly POSIX-compliant true(1) implementation. See true(1p)
-true "$@"

tests/posix/posix_env

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-set -ex
-
-PATH="$PWD/bin:$PATH"

tests/tests.mk

@@ -1,15 +0,0 @@
-# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this 
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-
-#TESTFILES != for file in tests/bonsai/*.mk tests/posix/*.mk; do printf '%s ' "$$file"; done;
-TESTFILES != for file in tests/bonsai/*.mk; do printf '%s ' "$$file"; done;
-
-TESTS != printf '%s\n' "$(TESTFILES)" | xargs -n1 basename \
-	| sed 's/\.mk/_tests/g'
-
-include $(TESTFILES)