2025-04-24

3mu/Intel4004.c

@@ -15,6 +15,7 @@
  * nybbles     4--|4--|4--|4--|4--|4--|
  * bits        111111111111111111111111 */
 
+#include <complex.h>
 #if __STDC_VERSION__ >= 199901L
 /* C99 type definitions */
 #	include <stdint.h>
@@ -42,6 +43,7 @@ struct Intel4004_State {
 	Nybble acc;     /* Accumulator */
 	Nybble reg[16]; /* R0 through RF */
 	Word pc[4];     /* PC0 through PC3 */
+	Word *cc;       /* Current PC */
 	Byte *rom;
 	Byte *ram;
 };
@@ -117,11 +119,38 @@ enum Intel4004_Instruction {
 /* INVALID                             0xFF     0b 1111 1111 */
 };
 
+#define INTEL4004_THIS_OP (state->rom[*state->cc])
+#define INTEL4004_NEXT_OP (state->rom[*state->cc + 1])
+#define INTEL4004_INC_OP do{ ++*state->cc; }while(0)
+#define INTEL4004_INC2_OP do{ *state->cc += 2; }while(0)
+
+/* <http://e4004.szyc.org/>-style naming */
+#define INTEL4004_PL  (*state->cc & 0x00F)
+#define INTEL4004_PM ((*state->cc & 0x0F0) >> 4)
+#define INTEL4004_PH ((*state->cc & 0xF00) >> 8)
+
+/* Also see the Intel MCS-4 Assembly Language Programming Manual (1973). */
+
+/* From the datasheet. */
+void Intel4004_RESET(struct Intel4004_State *state){
+	Nybble i;
+
+	state->carry = 0;
+	state->test = 0;
+	state->acc = 0;
+	for(i = 0; i <= (sizeof state->reg) / (sizeof *state->reg); ++i)
+		state->reg[i] = 0;
+	for(i = 0; i <= (sizeof state->pc) / (sizeof *state->pc); ++i)
+		state->pc[i] = 0;
+	state->cc = &state->pc[0];
+
+	return;
+}
+
 /* Does nothing. */
 void Intel4004_NOP(struct Intel4004_State *state){ /* 0b 0000 0000 */
 
-	++*state->pc;
-
+	INTEL4004_INC_OP;
 	return;
 }
 
@@ -141,16 +170,16 @@ void Intel4004_NOP(struct Intel4004_State *state){ /* 0b 0000 0000 */
  * If *state->pc & 0x08, a one test flag satisfies the condition. */
 void Intel4004_JCN(struct Intel4004_State *state){ /* 0b 0001 CCCC */
 
-	*state->pc =
-			!INTEL4004_JCN_COND_ISINVERT(state->rom[*state->pc])
-			&& (   (INTEL4004_JCN_COND_ISACCZERO(state->rom[*state->pc])
+	*state->cc =
+			!INTEL4004_JCN_COND_ISINVERT(INTEL4004_THIS_OP)
+			&& (   (INTEL4004_JCN_COND_ISACCZERO(INTEL4004_THIS_OP)
 					&& state->acc == 0)
-				|| (INTEL4004_JCN_COND_ISCARRYON(state->rom[*state->pc])
+				|| (INTEL4004_JCN_COND_ISCARRYON(INTEL4004_THIS_OP)
 				    && state->carry == 1)
-				|| (INTEL4004_JCN_COND_ISTESTON(state->rom[*state->pc])
+				|| (INTEL4004_JCN_COND_ISTESTON(INTEL4004_THIS_OP)
 				    && state->test == 1))
-		? state->rom[*state->pc + 1]
-		: *state->pc + 2;
+		? state->rom[*state->cc + 1]
+		: *state->cc + 2;
 
 	return;
 }
@@ -166,14 +195,13 @@ void Intel4004_JCN(struct Intel4004_State *state){ /* 0b 0001 CCCC */
 /* Fetches an immediate byte from ROM. */
 void Intel4004_FIM(struct Intel4004_State *state){ /* 0b 0010 RRR0 */
 
-	state->reg[INTEL4004_REGPAIR(state->rom[*state->pc])]
-		= HIGH_NYBBLE(state->rom[*state->pc + 1]);
+	state->reg[INTEL4004_REGPAIR(INTEL4004_THIS_OP)]
+		= HIGH_NYBBLE(INTEL4004_NEXT_OP);
 
-	state->reg[INTEL4004_REGPAIR(state->rom[*state->pc]) + 1]
-		= LOW_NYBBLE(state->rom[*state->pc + 1]);
-
-	*state->pc += 2;
+	state->reg[INTEL4004_REGPAIR(INTEL4004_THIS_OP) + 1]
+		= LOW_NYBBLE(INTEL4004_NEXT_OP);
 
+	INTEL4004_INC2_OP;
 	return;
 }
 
@@ -182,3 +210,37 @@ void Intel4004_SRC(struct Intel4004_State *state){ /* 0b 0010 RRR1 */
 
 void Intel4004_FIN(struct Intel4004_State *state){ /* 0b 0011 RRR0 */
 }
+
+/* Loads the immediate value in the low nybble of the opcode into the
+ * accumulator. */
+void Intel4004_LDM(struct Intel4004_State *state){ /* 0b 1101 DDDD */
+
+	state->acc = LOW_NYBBLE(INTEL4004_THIS_OP);
+
+	INTEL4004_INC_OP;
+	return;
+}
+
+void Intel4004_BBL(struct Intel4004_State *state){ /* 0b 1100 DDDD */
+/* <http://e4004.szyc.org/> lists 0b 1100 RRRR, most likely as a typo. I found
+ * 0b 1100 DDDD on the Intel 4004 datasheet. */
+
+	return Intel4004_LDM(state);
+}
+
+/* Clears the carry bit. */
+void Intel4004_CLC(struct Intel4004_State *state){ /* 0b 1111 0001 */
+
+	state->carry = 0;
+
+	INTEL4004_INC_OP;
+	return;
+}
+
+/* Clears both the accumulator and the carry bit. */
+void Intel4004_CLB(struct Intel4004_State *state){ /* 0b 1111 0000 */
+
+	state->acc = 0;
+
+	return Intel4004_CLC(state);
+}

Retired/mm/mm.1

@@ -73,4 +73,4 @@ Copyright (C) 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
 
 .SH SEE ALSO
 
-cat(1), dd(1), dj(1), tee(1)
+cat(1p), dd(1), dj(1), tee(1p)

Retired/pschdir/pschdir.c

@@ -21,11 +21,10 @@ int main(int argc, char *argv[]){
 		fprintf(stderr, "%s: %s: %s\n", argv[0], argv[1],
 			strerror(errno));
 		switch(errno){
-		case EACCES:	return EX_NOPERM;
-		case ELOOP:	return EX_UNAVAILABLE;
 		case ENAMETOOLONG:	return EX_OSERR;
-		case ENOENT:	return EX_NOINPUT;
-		case ENOTDIR:	return EX_NOINPUT;
+		case EACCES:	return EX_NOPERM;
+		case ENOENT: case ENOTDIR:
+				return EX_NOINPUT;
 		default:	return EX_UNAVAILABLE;
 		}
 	}

Wip/bitch/gtk4.c

@@ -0,0 +1,73 @@
+#include <gtk/gtk.h>
+
+#define BUF 100
+
+static GtkApplication *app;
+
+static void activate(GtkApplication *app, gpointer user_data);
+static void button_pressed(GtkWidget *button, gpointer data);
+
+static void
+activate(GtkApplication *app, gpointer user_data){
+	GtkWidget *box;
+	GtkWidget *button;
+	int c;
+	char *s;
+	GtkWidget *scrolledwindow;
+	GtkWidget *window;
+
+	window = gtk_application_window_new(app);
+	gtk_window_set_title(GTK_WINDOW(window), "Bitch");
+	gtk_window_set_default_size(GTK_WINDOW(window), h, v);
+
+	scrolledwindow = gtk_scrolled_window_new();
+	gtk_scrolled_window_set_overlay_scrolling(GTK_SCROLLED_WINDOW(scrolledwindow), 1);
+	gtk_window_set_child(GTK_WINDOW(window), scrolledwindow);
+
+	box = gtk_list_box_new();
+	//gtk_widget_set_halign(box, GTK_ALIGN_CENTER);
+	//gtk_widget_set_valign(box, GTK_ALIGN_CENTER);
+	gtk_scrolled_window_set_child(GTK_SCROLLED_WINDOW(scrolledwindow), box);
+
+	for(;;){
+		if(sip() == NULL)
+			break;
+		button = gtk_button_new_with_label(buf);
+		g_signal_connect(
+			button, "clicked", G_CALLBACK(button_pressed), NULL
+		);
+		gtk_list_box_insert(GTK_LIST_BOX(box), button, -1);
+	}
+
+	gtk_window_present(GTK_WINDOW(window));
+
+	return;
+}
+
+static void
+button_pressed(GtkWidget *button, gpointer data){
+
+	switch(f){
+	case 'w':
+		g_print("%s\n", gtk_button_get_label(GTK_BUTTON(button)));
+		break;
+	case 'x':
+		system(gtk_button_get_label(GTK_BUTTON(button)));
+		break;
+	}
+	if(shy)
+		g_application_quit(G_APPLICATION(app));
+
+	return;
+}
+
+int setup(){
+	app = gtk_application_new(
+		"org.trinity.femaledog", G_APPLICATION_FLAGS_NONE
+	);
+	g_signal_connect(app, "activate", G_CALLBACK(activate), NULL);
+	status = g_application_run(G_APPLICATION(app), 1, fake_argv);
+	g_object_unref(app);
+
+	return status;
+}

Wip/bitch/motif.c

@@ -0,0 +1,42 @@
+#include <Xm/Xm.h>
+#include <Xm/PushB.h>
+
+static XtAppContext app_context;
+
+static void activate(void);
+static void button_pressed(
+	Widget w, XtPointer client_data, XmPushButtonCallbackStruct *cbs
+);
+
+void setup(void){
+	Widget button;
+	Widget top_wid;
+
+	top_wid = XtVaAppInitialize(
+		&app_context, "Bitch", NULL, 0, &fake_argc, fake_argv, NULL,
+		NULL
+	);
+
+	for(;;){
+		if(sip() == NULL)
+			break;
+
+		button = XmCreatePushButton(top_wid, buf, NULL, 0);
+		XtManageChild(button);
+		XtAddCallback(button, XmNactivateCallback, button_pressed, NULL);
+	}
+
+	XtRealizeWidget(top_wid);
+	XtAppMainLoop(app_context);
+}
+
+static void
+button_pressed(
+	Widget w,
+	XtPointer client_data,
+	XmPushButtonCallbackStruct *cbs
+){
+	printf("pressed\n");
+	if(shy)
+		XtAppSetExitFlag(app_context);
+}

Wip/bitswap/bitswap.c

@@ -0,0 +1,65 @@
+#include <stdio.h> /* fgetc(3), fprintf(3), fputc(3), stderr, stdin, stdout,
+                    * EOF */
+#include <sysexits.h> /* EX_OK, EX_USAGE */
+#include <unistd.h> /* getopt(3) */
+
+/* untested */
+
+int
+usage(char *argv0) {
+	(void)fprintf(stderr, "Usage: %s\n", argv0);
+	return EX_USAGE;
+}
+
+int main(int argc, char *argv[]){
+	int c;
+
+	{
+		int c;
+
+		while ((c = getopt(argc, argv, "")) != -1) {
+			switch (c) {
+				default: return usage(argv[0]);
+			}
+		}
+	}
+
+
+#if 0
+// Swapping algorithm:   For example, say c is 0b0101_0101 */
+//                             /*                 <<< <<<< */
+// c <<= 7;                    /* Now 0b010_1010_1000_0000 */
+//                             /*              ^ >^        */
+// c |= (c & (1 << 8)) >> 2;   /* Now 0b010_1010_1000_0000 */
+//                             /*             ^> >>^       */
+// c |= (c & (1 << 9)) >> 4;   /* Now 0b010_1010_1010_0000 */
+//                             /*            ^>> >>>^      */
+// c |= (c & (1 << 10)) >> 6;  /* Now 0b010_1010_1010_0000 */
+//                             /*           ^>>> >>>> ^    */
+// c |= (c & (1 << 11)) >> 8;  /* Now 0b010_1010_1010_1000 */
+//                             /*         ^ >>>> >>>> >^   */
+// c |= (c & (1 << 12)) >> 10; /* Now 0b010_1010_1010_1000 */
+//                             /*        ^> >>>> >>>> >>^  */
+// c |= (c & (1 << 13)) >> 12; /* Now 0b010_1010_1010_1010 */
+//                             /*       ^>> >>>> >>>> >>>^ */
+// c |= (c & (1 << 14)) >> 14; /* Now 0b010_1010_1010_1010 */
+//                             /*   & 0b000_0000_1111_1111 */
+// c &= 0xFF;                  /* Now          0b1010_1010 */
+#endif
+
+	{
+		int c;
+		int i;
+
+		while ((c = fgetc(stdin)) != EOF) {
+			for (c <<= 7, i = 8; i <= 14; ++i)
+				{ c |= (c & (1 << i)) >> ((i - 7) * 2); }
+
+			if (fputc(c, stdout) == EOF)
+				{ perror(argv[0]); return EX_IOERR; }
+		}
+		if (ferror(stdin) != 0) { perror(argv[0]); return EX_IOERR; }
+	}
+
+	return EX_OK;
+}

Wip/cstdlib/ctype.c

@@ -1,55 +0,0 @@
-int
-isblank(int c){
-	return c == '\t'
-		|| c == ' ';
-}
-
-int
-isspace(int c){
-	return isblank(c)
-		|| c == '\n'
-		|| c == '\v'
-		|| c == '\f'
-		|| c == '\r';
-}
-
-int
-isgraph(int c){ return c >= '!' && c <= '~'; }
-
-int
-isprint(int c){ return c == ' ' || isgraph(c); }
-
-int
-iscntrl(int c){ return !isprint(c); }
-
-int
-isdigit(int c){ return c >= '0' && c <= '9'; }
-
-int
-islower(int c){ return c >= 'a' && c <= 'z'; }
-
-int
-isupper(int c){ return c >= 'A' && c <= 'Z'; }
-
-int
-isxdigit(int c){
-	return
-		isdigit(c)
-		|| (c >= 'a' && c <= 'f')
-		|| (c >= 'A' && c <= 'F');
-}
-
-int
-isalpha(int c){ return islower(c) || isupper(c); }
-
-int
-isalnum(int c){ return isalpha(c) || isdigit(c) };
-
-int
-ispunct(int c){ return c != ' ' && !isalnum(c) };
-
-int
-tolower(int c){ return c - isupper(c) * ('A' - 'a'); }
-
-int
-toupper(int c){ return c + islower(c) * ('A' - 'a'); }

Wip/cstdlib/ctype.h

@@ -1,17 +0,0 @@
-#ifndef _CTYPE_H
-#	define CTYPE_H
-int isblank(int c);
-int isspace(int c);
-int isgraph(int c);
-int isprint(int c);
-int iscntrl(int c);
-int isdigit(int c);
-int islower(int c);
-int isupper(int c);
-int isxdigit(int c);
-int isalpha(int c);
-int isalnum(int c);
-int ispunct(int c);
-int tolower(int c);
-int toupper(int c);
-#endif /* ifndef _CTYPE_H */

Wip/cstdlib/string.c

@@ -1,53 +0,0 @@
-char *
-strchr(const char *s, int c){
-	char *r;
-
-	for(r = s; ; ++r){
-		if(*r == c)
-			return r;
-		if(*r == '\0')
-			return NULL;
-	}
-}
-
-char *
-strrchr(const char *s, int c){
-	char *r;
-	char *p;
-
-	for(p = s, r = NULL; ; ++p){
-		if(*p == c)
-			r = p;
-		if(*p == '\0')
-			break;
-	}
-
-	return r;
-}
-
-char *
-strchrnul(const char *s, int c){
-	char *r;
-
-	for(r = s; ; ++r)
-		if(*r == c || r == '\0')
-			return r;
-}
-
-size_t
-strlen(const char *s){
-	size_t r;
-
-	for(r = 0; s[r] != '\0'; ++r);
-
-	return r;
-}
-
-size_t
-strnlen(const char *s, size_t maxlen){
-	size_t r;
-
-	for(r = 0; s[r] != '\0' && r < maxlen; ++r);
-
-	return r;
-}

Wip/cstdlib/string.h

@@ -1,8 +0,0 @@
-#ifndef _STRING_H
-#	define _STRING_H
-char *   strchr(const char *s, int c);
-char *  strrchr(const char *s, int c);
-char *strchrnul(const char *s, int c);
-size_t   strlen(const char *s);
-size_t  strnlen(const char *s, size_t maxlen);
-#endif /* ifndef _STRING_H */

Wip/head/head.c

@@ -1,12 +1,26 @@
-#include <stdio.h>
+#include <stdio.h> /* fprintf(3), stderr */
 #include <stdlib.h>
+#include <unistd.h> /* getopt(3) */
 
-/* The philosophical bits - /should this be a shell script?/ -
- * are more complicated than the actual program. sed(1) is not currently a part
- * of this project so there shouldn't be reliance on it. */
+static int lines = 10; /* POSIX.1 */
+static char *program_name = "head";
 
 int main(int argc, char *argv[]){
-	char *argv0 = argv[0];
-	size_t i;
+	int c;
+	extern char *optarg;
+	extern int opterr, optind, optopt;
 
+	if(argc > 0)
+		program_name = argv[0];
 
+	while((c = getopt(argc, argv, "n:")) != -1)
+		switch(c){
+		case 'n':
+			break;
+		default:
+#ifdef IGIT /* parse -[digit] options */
+#endif /* ifdef IGIT */
+usage:			fprintf(stderr, "Usage: %s (-n [lines]) (file...)\n",
+				program_name);
+			return EX_USAGE;
+		}

Wip/it/bang.py

@@ -9,3 +9,5 @@ def main(buffer, command):
 		except Exception as err:
 			print("%s" % str(err))
 	return buffer
+
+bang = main

Wip/it/it

@@ -3,10 +3,7 @@ import sys
 from buffer import Buffer
 from get_command import get_command
 
-def version():
-	print("it.py line editor; ALPHA 2021")
-	return None
-
+#$
 def main(buffer, supplied_command):
 	if supplied_command != [] and len(supplied_command) > 1:
 		command = supplied_command[1:]
@@ -21,7 +18,8 @@ def main(buffer, supplied_command):
 		if command == []:
 			continue
 
-		if command[0] in buffer.modules.keys() or buffer.import_module_(command[0]):
+		if (command[0] in buffer.modules.keys()
+				or buffer.import_module_(command[0])):
 			buffer = buffer.modules[command[0]].main(buffer, command)
 			if type(buffer) is int:
 				break

Wip/libshell/libshell.c

@@ -3,18 +3,15 @@
 char **
 getpaths(void)
 {
-	char *p;
-	char **q;
 	char *path;
-	size_t path_s;
-	char *path_temp;
 	char **paths;
-	size_t paths_s;
 
-	if((path_temp = getenv(PATH_NAME)) == NULL){
-		errno = ENOMEM; /* Cannot allocate memory */
-		return NULL;
-	}
+	{
+		char *path_temp;
+		size_t path_s;
+
+		if((path_temp = getenv(PATH_NAME)) == NULL)
+			goto bail;
 
 		/* How long is path? */
 		for(path_s = 0; path_temp[path_s] != '\0'; ++path_s);
@@ -23,22 +20,22 @@ getpaths(void)
 
 		/* getenv's return value mustn't be modified so copy it into memory we
 		 * control */
-	if((path = malloc(sizeof(char) * (path_s + 1))) == NULL){
-		errno = ENOMEM; /* Cannot allocate memory */
-		return NULL;
-	}
+		if((path = malloc((sizeof *path) * (path_s + 1))) == NULL)
+			goto bail;
+
 		memcpy(path, path_temp, path_s + 1);
-	path_temp = NULL;
-	path_s = 0; /* This shouldn't be necessary anymore */
+	}
+
+	{
+		char *p;
+		char **q;
+		size_t paths_s;
 
 		/* How many paths in $PATH? */
 		for(paths_s = 1, p = path; *p != '\0'; paths_s += *p++ == PATH_DELIMITER);
 
-	if((paths = malloc(sizeof(char *) * (paths_s + 1))) == NULL){
-		free(path);
-		errno = ENOMEM; /* Cannot allocate memory */
-		return NULL;
-	}
+		if((paths = malloc((sizeof *paths) * (paths_s + 1))) == NULL)
+			goto bail1;
 
 		/* Replace all instances of the path delimiter with 0, and then put the
 		 * next path beginning into paths. */
@@ -50,10 +47,15 @@ getpaths(void)
 			}
 	
 		paths[path_s] = NULL;
+	}
 
 	/* Because paths[0] will always be path, we can just free(*paths) at
 	 * the end and discard path */
 	path = NULL;
 
 	return paths;
+
+bail1:	free(path);
+bail:	errno = ENOMEM; /* Cannot allocate memory */
+	return NULL;
 }

Wip/lsd/Makefile

@@ -0,0 +1,102 @@
+include hyperlinks.mk
+
+all: fhs learn
+
+fhs:
+	# Filesystem Hierarchy Standard 3.0, 2015
+	# https://refspecs.linuxfoundation.org/FHS_3.0/fhs-3.0.pdf
+
+	# section 3.2
+	mkdir -p	"$(PREFIX)/bin"
+	mkdir -p	"$(PREFIX)/boot"
+	mkdir -p	"$(PREFIX)/dev"
+	mkdir -p	"$(PREFIX)/etc"
+	mkdir -p	"$(PREFIX)/lib"
+	mkdir -p	"$(PREFIX)/media"
+	mkdir -p	"$(PREFIX)/mnt"
+	mkdir -p	"$(PREFIX)/opt"
+	mkdir -p	"$(PREFIX)/run"
+	mkdir -p	"$(PREFIX)/sbin"
+	mkdir -p	"$(PREFIX)/srv"
+	mkdir -p	"$(PREFIX)/tmp"
+	mkdir -p	"$(PREFIX)/usr"
+	mkdir -p	"$(PREFIX)/var"
+
+	# section 3.7.4
+	mkdir -p	"$(PREFIX)/etc/opt"
+
+	# section 4.2
+	mkdir -p	"$(PREFIX)/usr/bin"
+	mkdir -p	"$(PREFIX)/usr/lib"
+	mkdir -p	"$(PREFIX)/usr/local"
+	mkdir -p	"$(PREFIX)/usr/sbin"
+	mkdir -p	"$(PREFIX)/usr/share"
+
+	# section 4.3
+	mkdir -p	"$(PREFIX)/usr/include"
+	mkdir -p	"$(PREFIX)/var/spool"
+	mkdir -p	"$(PREFIX)/var/tmp"
+	mkdir -p	"$(PREFIX)/var/lock"
+	ln -s	"$(PREFIX)/usr/spool"	"$(PREFIX)/var/spool"
+	ln -s	"$(PREFIX)/usr/tmp"	"$(PREFIX)/var/tmp"
+	ln -s	"$(PREFIX)/usr/spool/locks"	"$(PREFIX)/var/lock"
+
+	# section 4.6
+	mkdir -p	"$(PREFIX)/usr/lib"
+
+	# section 4.9
+	mkdir -p	"$(PREFIX)/usr/local"
+
+	# section 4.9.2
+	mkdir -p	"$(PREFIX)/usr/local/bin"
+	#mkdir -p	"$(PREFIX)/usr/local/etc" # see section 4.9.3
+	mkdir -p	"$(PREFIX)/usr/local/games"
+	mkdir -p	"$(PREFIX)/usr/local/include"
+	mkdir -p	"$(PREFIX)/usr/local/lib"
+	mkdir -p	"$(PREFIX)/usr/local/man"
+	mkdir -p	"$(PREFIX)/usr/local/sbin"
+	mkdir -p	"$(PREFIX)/usr/local/share"
+	mkdir -p	"$(PREFIX)/usr/local/src"
+
+	# section 4.9.3
+	ln -s	"$(PREFIX)/usr/local/etc" "$(PREFIX)/etc/local"
+
+	# section 4.11.6
+	mkdir -p	"$(PREFIX)/usr/share/man"
+
+	# section 4.11.7
+	mkdir -p	"$(PREFIX)/usr/share/misc"
+
+	# section 4.12
+	mkdir -p	"$(PREFIX)/usr/src"
+
+	# section 5.2
+	mkdir -p	"$(PREFIX)/var/lib"
+	mkdir -p	"$(PREFIX)/var/local"
+	mkdir -p	"$(PREFIX)/var/log"
+	mkdir -p	"$(PREFIX)/var/opt"
+	#mkdir -p	"$(PREFIX)/var/run" # see section 5.13.2
+
+	# section 5.8.2
+	mkdir -p	"$(PREFIX)/var/lib/misc"
+
+	# section 5.13.2
+	ln -s	"$(PREFIX)/var/run" "$(PREFIX)/run"
+
+	# section 6.1.10
+	mkdir -p	"$(PREFIX)/var/spool/cron"
+
+$(PREFIX)/usr/src/linux: fhs
+	git clone "$(LINUX_UPSTREAM_GIT)" "$(PREFIX)/usr/src/linux.tmp"
+	mv "$(PREFIX)/usr/src/linux.tmp" "$(PREFIX)/usr/src/linux"
+
+$(PREFIX)/usr/src/musl: fhs
+	git clone "$(MUSL_UPSTREAM_GIT)" "$(PREFIX)/usr/src/musl.tmp"
+	mv "$(PREFIX)/usr/src/musl.tmp" "$(PREFIX)/usr/src/musl"
+
+musl: $(PREFIX)/usr/src/musl
+	cd "$(PREFIX)/usr/src/musl"
+	./configure --prefix="$(PREFIX)"
+	$(MAKE) install
+
+.PHONY: all

Wip/lsd/hyperlinks.mk

@@ -0,0 +1,4 @@
+GCC_UPSTREAM_GIT=git://gcc.gnu.org/git/gcc.git
+LINUX_UPSTREAM_GIT=git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+MUSL_UPSTREAM_GIT=git://git.musl-libc.org/musl
+PKGSRC_UPSTREAM_HTTPS=https://cdn.netbsd.org/pub/pkgsrc/current/pkgsrc.tar.xz

Wip/lsd/trilsd.7

@@ -0,0 +1,65 @@
+.TH TRINITX 7
+
+.SH PRONUNCIATION
+"Try LSD"
+
+.SH SYNOPSIS
+.I TriLSD
+is a UNIX-like software distribution built upon the Linux kernel and the
+musl C standard library, with nearly all configuration options left to the
+user's own device.
+
+.SH BASE SYSTEM
+A
+.I TriLSD
+system always has the following packages:
+dash,
+the GNU compiler collection,
+GNU make,
+musl,
+and
+linux and util-linux.
+.PP
+In addition,
+.I TriLSD
+needs a core utilities package.
+The GNU coreutils are a popular choice but Busybox or your own may be used.
+.PP
+.I TriLSD
+also needs an initialization system.
+OpenRC is the suggested choice but others may be used.
+SystemD is discouraged; it's mentioned for its popularity and frowned upon for
+its generally lax security.
+
+.SH INSTALLATION
+To install
+.I TriLSD
+most of the POSIX specified utilities including awk, git(1), GNU make, and a C
+compiler that can build the GNU compiler collection must be installed.
+
+.PP
+For the installation process see
+.RB try (1)
+
+.SH PACKAGE MANAGEMENT
+.I TriLSD
+does not come with a package manager; the user may choose whatever
+system-independent package manager they prefer.
+
+.SH CONTRIBUTING
+Pay attention to projects' guidelines for distributions.
+.PP
+musl guidelines: https://wiki.musl-libc.org/guidelines-for-distributions.html
+
+.SH HISTORY
+The
+.I TriLSD
+project was started 2021-12-28 as Trinitx.
+
+.SH COPYRIGHT
+.I TriLSD
+documentation and all in-house tools are part of the public domain.
+Components of the distribution are of course subject to their own licenses.
+
+.SH SEE ALSO
+.RB try (1)

Wip/rss/Cargo.toml

@@ -0,0 +1,8 @@
+[package]
+name = "rss"
+version = "0.1.0"
+edition = "2021"
+
+# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
+
+[dependencies]

Wip/rss/pig.md

@@ -1,37 +0,0 @@
-# pig\_birth
-
-Initializes the pig.
-
-# pig\_feed
-
-Refreshes all the feed in the pigpen.
-
-# pig\_fetch
-
-Fetches the feed for the pigpen.
-
-Not intended to be called on its own.
-
-# pig\_latin
-
-Prints internal pig details for a given feed file.
-
-# pig\_name
-
-Prints the file name for a given pig feed.
-
-# pig\_pen
-
-Prints the location of the pigpen, which houses all stowed pig feed.
-
-A given feed will be stored as `"$(pig_pen)/$(pig_name)`.
-
-# pig\_recall
-
-Prints the contents of a given feed URL.
-
-If the URL isn't already stowed, stows it before printing.
-
-# pig\_stow
-
-Stows fetched feed in the pigpen.

Wip/rss/pig_birth

@@ -1,19 +0,0 @@
-#!/bin/sh
-set -e
-
-argv0="$0"
-
-depend(){
-	if ! command -v "$1" >/dev/null 2>&1; then
-		printf "%s: %s: Could not find dependency.\n" "$argv0" "$1" \
-			1>&2
-		exit 69 # sysexits(3) EX_UNAVAILABLE
-	fi
-	return 0
-}
-
-depend curl
-depend jq
-depend xq
-
-mkdir "$(pig_pen)"

Wip/rss/pig_feed

@@ -1,7 +0,0 @@
-#!/bin/sh
-
-for file in "$(pig_pen)"/*; do
-	pig_latin "$file" \
-		| jq '.feed_url' \
-		| xargs pig_stow &
-done

Wip/rss/pig_fetch

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-curl -so - -- "$1"

Wip/rss/pig_latin

@@ -1,10 +0,0 @@
-#!/bin/sh
-
-while str isvalue "$1"; do
-	case "$1" in
-	*xml)
-		xq '.feed.pig' <"$1" ;;
-	*json)
-		jq '.feed.pig' <"$1" ;;
-	esac
-done

Wip/rss/pig_name

@@ -1,4 +0,0 @@
-#!/bin/sh
-
-printf "%s\n" "$1" \
-	| tr -cd '[:alnum:]'

Wip/rss/pig_pen

@@ -1,15 +0,0 @@
-#!/bin/sh
-set -e
-
-str isvalue "$1" \
-		&& printf "Usage: %s\n" "$0" 1>&2 \
-		&& exit 64 \
-|| str isvalue "$PIGPEN" \
-		&& printf "%s\n" "$PIGPEN" \
-		&& exit 0 \
-	|| str isvalue "$XDG_CONFIG_HOME" \
-		&& printf "%s\n" "$XDG_CONFIG_HOME" \
-		&& exit 0 \
-	|| printf "%s/.pigpen\n" "$HOME" \
-		&& exit 0 \
-	|| exit 1

Wip/rss/pig_recall

@@ -1,7 +0,0 @@
-#!/bin/sh
-set -e
-
-filename="$(pig_pen)/$(pig_name "$1")"
-
-test -e "$filename" || pig_stow "$1"
-cat "$filename"

Wip/rss/pig_stow

@@ -1,18 +0,0 @@
-#!/bin/sh
-set -e
-
-while str isvalue "$1"; do
-
-	pig_fetch "$1" | xq -x "$(
-		printf '.
-	* {	feed: {	pig: {
-			feed_url: "%b",
-			pet_sound: "oink",
-			stow_date: "%b",
-			version: "0"
-	}	}	}' "$1" "$(date '+%Y-%m-%dT%T')"\
-		| tr -d '[:space:]' \
-	)" >"$(pig_pen)/$(pig_name "$1")"
-
-	shift
-done

Wip/rss/src/main.rs

@@ -0,0 +1,9 @@
+use json;
+fn feed() {
+    
+}
+fn stow(title: String) {
+    
+}
+fn main() {
+}

Wip/rss/youtube

@@ -1,182 +0,0 @@
-#!/bin/sh
-
-set -e
-
-argv0="$0"
-
-PIGPEN="$(pig_pen)"
-
-latin(){
-	case "$1" in
-	*json)	jq '.feed.pig' <"$1" ;;
-	*xml)	xq '.feed.pig' <"$1" ;;
-	esac
-}
-
-list_channels(){
-	pscat \
-		[ sh -c "for file in \"$PIGPEN\"/*.xml; \
-			do xq '{(.feed.link[0].\"@href\"): .feed.title}' \"\$file\"; \
-			done 2>/dev/null" ] \
-		[ sh -c "for file in \"$PIGPEN\"/*.json; \
-			do jq '{(.feed.link[0].\"@href\"): .feed.title}' \"\$file\"; \
-			done 2>/dev/null" ] \
-		[ printf "\n" ] \
-		| sed \
-			-e '/{/d' \
-			-e '/}/d' \
-			-e 's/^  \"//g' \
-			-e 's/\": \"/	/g' \
-			-e 's/\,$//g' \
-			-e 's/\"$//g'
-}
-
-list_videos(){
-	file="$(printf "$PIGPEN"/$( \
-		list_channels \
-			| sed "/$1/q" \
-			| tail -n 1 \
-			| cut -f 1 \
-			| xargs pig_name \
-	)*)"
-	case "$file" in
-	*json)
-		jq \
-			'reduce .feed.entry[] as $item (
-				{};
-				. + { ($item.link."@href"): $item.title }
-			)' "$file"
-		;;
-	*xml)
-		xq \
-			'reduce .feed.entry[] as $item (
-				{};
-				. + { ($item.link."@href"): $item.title }
-			)' "$file"
-		;;
-	*)
-		printf "No file found!\n" 1>&2
-		true
-		;;
-	esac | sed \
-		-e '1d' \
-		-e '$d' \
-		-e 's/\": \"/	/g' \
-		-e 's/^  \"//g' \
-		-e 's/\,$//g' \
-		-e 's/\"$//g' # this is really hacky
-
-}
-
-stow(){
-	name="$PIGPEN/$(pig_name "$1")"
-	pig_fetch "$1" | xq "$(
-			date '+%Y-%m-%dT%T' \
-			| xargs printf '
-			. * { feed: { pig: {
-				feed_url: "%b",
-				pet_sound: "choo",
-				stow_date: "%b",
-				version: "0"
-			} } }' "$1" \
-		)" >"$name.json"
-	rm -f "$name.xml"
-}
-
-watch(){
-	youtube-dl -F "$1"
-	printf "Pick a format [22]: "
-	input="$(head -n 1 | tr -d '\n')"
-	str isalnum "$input" \
-		&& str isdigit $input \
-		|| input=22 \
-		&& youtube-dl -f $input "$1" -o - \
-			| mpv -
-}
-
-usage(){
-	printf "\
-Usage: %s
-	list_channels
-	list_videos [channel name]
-	listen [video URL]
-	refresh (channel name...)
-	subscribe [channel URL...]
-	watch [video URL]
-	watch_latest [channel name]
-" "$argv0" 1>&2
-}
-
-case "$1" in
-list_channels)
-	! str isvalue "$2" \
-		|| usage
-	list_channels
-	;;
-list_videos) # do something with youtube-dl?
-	list_videos "$2"
-	;;
-listen)
-	str isvalue "$2" \
-		|| usage
-	while str isvalue "$2"
-		do youtube-dl "$2" -f bestaudio -o - \
-			| mpv -
-		shift
-	done
-	;;
-refresh)
-	if ! str isvalue "$2"
-		then for file in "$PIGPEN"/*
-			do stow "$( \
-				latin "$file" \
-					| jq -r '.feed_url' \
-			)"
-		done
-	else
-		while str isvalue "$2"
-			do stow "$( \
-				latin "$( \
-					list_channels \
-						| grep "$2" \
-						| cut -f 2 \
-				)" | jq '.feed_url' \
-			)"
-			shift
-		done
-	fi
-	;;
-subscribe)
-	str isvalue "$2" \
-		|| usage
-	while str isvalue "$2"
-		do stow "http://www.youtube.com/feeds/videos.xml?channel_id=$(
-				youtube-dl \
-					--get-filename \
-					--playlist-items 1 \
-					-o '%(channel_id)s' \
-					"$2" \
-		)"
-		shift
-	done
-	;;
-watch) # needs work
-	str isvalue "$2" \
-		|| usage
-	while str isvalue "$2"
-		do watch "$2"
-	done
-	;;
-watch_latest)
-	str isvalue "$2" \
-		|| usage
-	watch "$( \
-		list_videos "$2" \
-			| head -n 1 \
-			| cut -f 1 \
-	)"
-	;;
-*)	usage ;;
-esac
-
-exit 0

Wip/sysexits/Makefile

@@ -1,13 +1,8 @@
-TARGETS = sysexits sysexits.h
-CFLAGS = -I..
+all: sysexits sysexits.h
 
-all: $(TARGETS)
-
-clean:
-	rm -f $(TARGETS)
-
-%: %.c
-	$(CC) $(CFLAGS) -o $@ $@.c
+sysexits: sysexits.c
 
 sysexits.h: sysexits
 	./sysexits >sysexits.h
+
+.PHONY: all

Wip/sysexits/sysexits.c

@@ -1,6 +1,5 @@
 #include <stdio.h>
 #include <unistd.h>
-#include "arraylen.h"
 
 /* Thanks to u/smcameron on Reddit. */
 
@@ -12,7 +11,7 @@
  * technicality.
  * I implemented sysexits(3) in the enum method before reading the BSD 4.0
  * source to see how they did it. */
-#define ENUM 1
+#define DEFINE 1
 
 static char *program_name = "sysexits";
 

Wip/sysexits/sysexits.h

@@ -0,0 +1,21 @@
+#ifndef _SYSEXITS_H
+#	define _SYSEXITS_H
+enum{
+	EX_OK = 0,
+	EX_USAGE = 64,
+	EX_DATAERR = 65,
+	EX_NOINPUT = 66,
+	EX_NOUSER = 67,
+	EX_NOHOST = 68,
+	EX_UNAVAILABLE = 69,
+	EX_SOFTWARE = 70,
+	EX_OSERR = 71,
+	EX_OSFILE = 72,
+	EX_CANTCREAT = 73,
+	EX_IOERR = 74,
+	EX_TEMPFAIL = 75,
+	EX_PROTOCOL = 76,
+	EX_NOPERM = 77,
+	EX_CONFIG = 78
+};
+#endif /* ifndef _SYSEXITS_H */

Wip/toki/README.txt

@@ -1,3 +0,0 @@
-- move executables somewhere in path
-- `$ toki_update` to fetch dictionary
-- `$ toki_sitelen` to tokiponize

Wip/toki/toki_sitelen

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-set -e
-
-toki_ucsur "$@" | utf8

cbz/cbarchives.txt

@@ -1,23 +1,22 @@
 Comic Book Archives (CB7, CBR, CBZ)
 
+<http://justsolve.archiveteam.org/wiki/Comic_Book_Archive>
+<https://en.wikipedia.org/wiki/Comic_book_archive>
+
 A Comic Book Archive is just an archive with a bunch of sequentially-named
 images in it which collate ASCIIbetically to the order in which they should be
 read. Each image corresponds to a page presented by a comic book reader and a
 Comic Book Archive represents a digital comic book.
 
-No guarantees can be made regarding image format, image names (though you can
-expect them to match [:digit:]*\..*; that is, a bunch of numbers followed by a
-file extension), archive attributes (compression or metadata), or what is in
-archives besides the images. In fact, when a comic book only has one image, the
-most common type of file in a comic book archive may not be an image at all.
+No guarantees can be made regarding image format, image names, archive
+attributes (compression or metadata), or what is in archives besides the
+images. In fact, when a comic book only has one image, the most common type of
+file in a comic book archive may not be an image at all.
 
 The extension corresponds to what type of archive is being used. I haven't seen
 an extension that hasn't fit within DOS 8.3, which makes sense as amateur
 skiddies and repackers mostly use Windows.
 
-<http://justsolve.archiveteam.org/wiki/Comic_Book_Archive>
-<https://en.wikipedia.org/wiki/Comic_book_archive>
-
 Here's a table of Comic Book Archive types. I can't imagine this list is
 comprehensive but I can't find more on-line.
  ____________________  
@@ -32,10 +31,12 @@ comprehensive but I can't find more on-line.
 
 I normalize the files I get to the following settings:
 
-ARCHIVE: PKzip. DEFLATE algorithm. No other configuration.
+ARCHIVE: PKzip. DEFLATE algorithm. No other configuration and no
+	subdirectories. ($ zip -jZ DEFLATE)
 CONTENTS: ONLY images. Whatever encoding in which I found them.
 	Sequential naming starting from one, with leading zeroes to ensure file
-	names are all the same length.
+	names are all the same length. e.g. 5 pages are 1-5.ext, but 15 are
+	01-15.ext
 
 <https://en.wikipedia.org/wiki/7-Zip>
 7-Zip is free and open source. There are a number of implementations and you

cbz/cbr2cbz

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-set -e
+set -ex
 
 usage(){
 	printf 'Usage: %s [files...]\n' "$0"
@@ -22,9 +22,10 @@ else trap 'rm -rf "$d"; trap - EXIT; exit' EXIT INT HUP
 fi
 
 while test -n "$1"; do
-	unrar x -op"$d" "$1"
-	zip -jZ deflate "$1".cbz "$d"/*
-	rm "$d"/*
+	# unrar x -op"$d" "$1"
+	bsdtar xf "$1" -C "$d"
+	zip -jrZ deflate "$1".cbz "$d"/*
+	rm -r "$d"/*
 	shift
 done
 

cbz/cbzcat

@@ -10,49 +10,79 @@ usage(){
 test -n "$2" \
 	|| usage
 
-d="$(mktemp -d || printf '%s/.cbzcat' "$HOME/")"
+d="$(mktemp -d || printf '%s/.cbzcat\n' "$HOME/")"
+if test -n "$DEBUG"; then
+	printf 'Using temporary directory %s\n' "$d"
+	set -x
+else
 	trap 'rm -rf "$d"; trap - EXIT; exit' EXIT INT HUP
-mkdir -p "$d"/x
-
-i=1  # index
-il=1 # index length in digits
-
-for f in "$@"; do
-	test -e "$f" \
-		|| usage
-
-	unzip -d "$d"/x "$f"
-
-	rm -f "$d"/x/*.xml
-
-	for g in "$d"/x/*; do
-		# if there aren't enough leading zeroes
-		if ! printf '%s' "$i" \
-				| wc -c \
-				| xargs test "$il" =; then
-			for h in "$d"/*
-				do test "$h" = "$d"/x \
-					|| printf '%s\n' "$h" \
-						| sed 's|[^/]*$|0&|' \
-						| xargs mv "$h"
-			done
-			# update index digit length
-			il="$(printf '1 + %s\n' "$il" | bc)"
 fi
 
-		# move file to indexed position
-		printf '%s\n' "$g" \
-			| sed 's|^.*\.||' \
-			| xargs printf '%s/%s%s\n' "$d" "$i". \
-			| xargs mv "$g"
+parallel \
+		test -e {} \
+		::: "$@" \
+	|| usage
 
-		# increment i
-		i="$(printf '1 + %s\n' "$i" | bc)"
-	done
-done
+parallel --bar \
+	unzip -qqd "$d/"{#} {} \
+	::: "$@"
 
-rm -r "$d"/x
+# num is created by the shell (parallel in this case) before the pipeline is
+# run, so we have to compensate for it already being in the directory when the
+# files are listed
+parallel \
+	rm -f {}/*.xml \; \
+	ls {} \
+		\| grep -v \
+			-e '^num$' \
+		\| wc -l \
+		\>{}/num \; \
+	printf '0\\n' \
+		'>>'{}/prevs \; \
+	::: "$d"/*
 
-zip -Z deflate out.cbz "$d"/*
+parallel \
+	test {1/} -lt {2/} \
+		'&&' dd \
+			'<'{1}/num \
+			'>>'{2}/prevs \
+			'2>'/dev/null \
+		'||' true \
+	::: "$d"/* \
+	::: "$d"/*
+
+parallel \
+	\<{}/prevs \
+		sed 's/\\$/ + /' \
+		\| tr -d '\n' \
+		\| sed 's/ + \\$//' \
+		\| bc \
+		\>{}/sum \
+	::: "$d"/*
+
+false
+
+parallel \
+	ls {}/../ \; \
+	parallel -I [] --arg-sep :::: \
+			test [] -lt {} \
+				'&&' '<'[]/num xargs \
+					printf '%s + ' \
+			:::: {}/../* \
+		\| sed 's| + $||' \
+		\| bc \
+		\>{}/prevs \
+		::: "$d"/*
+
+
+
+mkdir "$d"/0
+
+false
+
+parallel --dry-run sh -c "\
+for dir in "
+
+zip -Z deflate out.cbz "$d"/0/*
 
 rm -r "$d"

dmenubar/Makefile

@@ -27,19 +27,12 @@ CFLAGS = \
 
 LDFLAGS  = -L$(X11LIB) -lX11 $(XINERAMALIBS) $(FREETYPELIBS)
 
-dmenubar: config.h dmenubar.o drw.h drw.o util.o
-	@echo dmenu build options:
-	@echo "CFLAGS   = $(CFLAGS)"
-	@echo "LDFLAGS  = $(LDFLAGS)"
-	@echo "CC       = $(CC)"
+dmenubar: dmenubar.o drw.h drw.o util.o
 	$(CC) -o $@ dmenubar.o drw.o util.o $(LDFLAGS)
 
 .c.o:
 	$(CC) -c $(CFLAGS) $<
 
-config.h:
-	cp config.def.h $@
-
 clean:
 	rm -f dmenubar *.o
 

dmenubar/dmenubar.c

@@ -1,75 +1,76 @@
 /* See LICENSE file for copyright and license details. */
 
-/* This is a hack I did years ago. Fork dmenu and start from there if you can.
- * ~ trinity */
-
 #include <locale.h> /* setlocale(3), LC_CTYPE */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h> /* strlen(3) */
+#include <stdio.h> /* fprintf(3), stderr */
 #include <sysexits.h> /* EX_USAGE */
 #include <unistd.h> /* getopt(3) */
-#include <X11/Xlib.h>
+#include <X11/Xlib.h> /* XSupportsLocale(3), Display, Window */
 #include <X11/Xutil.h>
 #ifdef XINERAMA
 #	include <X11/extensions/Xinerama.h>
 #endif
-#include <X11/Xft/Xft.h>
-#include "drw.h"
-#include "util.h"
-
-#define INTERSECT(x,y,w,h,r)  (MAX(0, MIN((x)+(w),(r).x_org+(r).width)  - MAX((x),(r).x_org)) \
-                             * MAX(0, MIN((y)+(h),(r).y_org+(r).height) - MAX((y),(r).y_org)))
+#include <X11/Xft/Xft.h> /* XftColor */
+#include "drw.h" /* drw_clr_create(3), drw_create(3), drw_fontset_create(3),
+                  * drw_fontset_getwidth(3), drw_free(3), drw_map(3),
+                  * drw_resize(3), drw_setscheme(3), drw_rect(3), drw_text(3),
+                  * Drw */
 
 /* chars to be allocated for the text displayed in the bar */
 #define BUFSIZE 1024
 
-enum { Scheme, SchemeLast }; /* color schemes */
-/* enumerated because Suckless has SchemeNorm, SchemeSel, etc.
- * should be made into like one char *Scheme[2] */
+#define MIN(A, B) ((A) < (B) ? (A) : (B))
+#define MAX(A, B) ((A) > (B) ? (A) : (B))
 
-static int bh;
 static XClassHint ch = {"dmenubar", "dmenubar"};
-static Display *dpy;
-static Drw *drw;
-static char *embed;
-static int inputw = 0;
-static int lrpad; /* sum of left and right padding */
-static int mh;
-static int mon = -1;
-static int mw;
-static Window parentwin;
-static Window root;
-static Clr *scheme[SchemeLast];
-static int screen;
-static Window win;
 
-#define BREAK_ON_EOF 0
+#define bool char
+static struct {
+	bool topbar;       /* -b */
+	char *bg_hex;      /* -B */
+	bool break_on_eof; /* -e */
+	char *fg_hex;      /* -F */
+	int mon;           /* -m */
+	char *embed;       /* -w */
+} args;
+#undef bool
 
-/* -f option overrides fonts[0]; default X11 font or font set */
-static const char *fonts[] = {
-	"monospace:size=10"
-};
+#define topbar_default 1
+static char *bg_hex_default = "#005577";
+#define break_on_eof_default 0
+static char *fg_hex_default = "#EEEEEE";
+#define mon_default -1
+#define embed_default NULL
 
-static const char *colors[SchemeLast][2] = {
-	/* fg, bg */
-	[Scheme] = { "#eeeeee", "#005577" }
+/* default X11 font or font set */
+static const char *fonts[] = { /* drw_fontset_create(3) wants const char ** */
+	"monospace:size=10" /* -f overrides this */
 };
 
 int
 main(int argc, char *argv[]){
+	int bh;
+	XftColor bg;
 	int c;
+	Display *dpy;
+	Drw *drw;
 	unsigned int du;
 	Window dw;
 	Window *dws;
+	XftColor fg;
 	int i;
 	int j;
+	int lrpad; /* sum of left and right padding */
+	int mh;
+	int mw;
 	extern char *optarg;
+	Window parentwin;
+	Window root;
+	int screen;
 	XSetWindowAttributes swa;
 	char text[BUFSIZE];
-	int topbar; /* 0=bottom 1=top */
 	Window w;
 	XWindowAttributes wa;
+	Window win;
 	int x;
 	int y;
 #ifdef XINERAMA
@@ -78,110 +79,147 @@ main(int argc, char *argv[]){
 	int a, di, n, area = 0;
 #endif
 
-	topbar = 1;
+	args.topbar = topbar_default;
+	args.bg_hex = bg_hex_default;
+	args.break_on_eof = break_on_eof_default;
+	args.fg_hex = fg_hex_default;
+	args.mon = mon_default;
+	args.embed = embed_default;
 	while((c = getopt(argc, argv, ":bf:m:B:F:w:")) != -1)
 		switch(c){
 		case 'b':
-			topbar = 0;
+			args.topbar = !args.topbar;
+			break;
+		case 'e':
+			args.break_on_eof = !args.break_on_eof;
 			break;
 		case 'B': if(optarg){
-			colors[Scheme][ColBg] = optarg;
+			args.bg_hex = optarg;
 			break;
 		}case 'f': if(optarg){
 			fonts[0] = optarg;
 			break;
 		}case 'F': if(optarg){
-			colors[Scheme][ColFg] = optarg;
+			args.fg_hex = optarg;
 			break;
 		}case 'm': if(optarg){
-			mon = atoi(optarg);
+			args.mon = atoi(optarg);
 			break;
 		}case 'w': if(optarg){
-			embed = optarg;
+			args.embed = optarg;
 			break;
 		}default: /* optarg==0 falls through */
 			fprintf(stderr,
-				"Usage: %s (-b) (-B [background color])"
+				"Usage: %s (-be) (-B [background color])"
 				"(-f [font]) (-F foreground color)\n"
 				"\t(-m [monitor]) (-w [windowid)\n",
 				argv[0]);
 			return EX_USAGE;
 		}
 
-	if (!setlocale(LC_CTYPE, "") || !XSupportsLocale())
+	if(setlocale(LC_CTYPE, "") == NULL || !XSupportsLocale())
 		fprintf(stderr, "%s: No locale support.\n", argv[0]);
-	if (!(dpy = XOpenDisplay(NULL)))
-		die("cannot open display");
+
+	if((dpy = XOpenDisplay(NULL)) == NULL){
+		fprintf(stderr, "%s: Cannot open X display.\n", argv[0]);
+		return EX_UNAVAILABLE;
+	}
 	screen = DefaultScreen(dpy);
 	root = RootWindow(dpy, screen);
-	if (!embed || !(parentwin = strtol(embed, NULL, 0)))
+	if (args.embed == NULL || !(parentwin = strtol(args.embed, NULL, 0)))
 		parentwin = root;
-	if (!XGetWindowAttributes(dpy, parentwin, &wa))
-		die("could not get embedding window attributes: 0x%lx",
-		    parentwin);
+	if (!XGetWindowAttributes(dpy, parentwin, &wa)){
+		fprintf(stderr, "%s: Could not get embedding window "
+			"attributes: 0x%lx", argv[0], parentwin);
+		return EX_UNAVAILABLE;
+	}
 	drw = drw_create(dpy, screen, root, wa.width, wa.height);
-	if (!drw_fontset_create(drw, fonts, (sizeof fonts) / (sizeof *fonts)))
-		die("no fonts could be loaded.");
+	if (!drw_fontset_create(drw, fonts, (sizeof fonts) / (sizeof *fonts))){
+		fprintf(stderr, "%s: No fonts could be loaded.\n", argv[0]);
+		return EX_UNAVAILABLE;
+	}
 	lrpad = drw->fonts->h;
 
-	/* ??? */
 #ifdef __OpenBSD__
-	if (pledge("stdio rpath", NULL) == -1)
-		die("pledge");
+	if(pledge("stdio rpath", NULL) == -1){
+		fprintf(stderr, "%s: Could not pledge(2).\n", argv[0]);
+		return EX_UNAVAILABLE;
+	}
 #endif
 
-	/* init appearance */
-	for (j = 0; j < SchemeLast; j++)
-		scheme[j] = drw_scm_create(drw, colors[j], 2);
+	drw_clr_create(drw, &bg, args.bg_hex);
+	drw_clr_create(drw, &fg, args.fg_hex);
 
 	/* calculate menu geometry */
 	bh = drw->fonts->h + 2;
 	mh = bh;
 #ifdef XINERAMA
+#	define INTERSECT(x, y, w, h, r) (\
+		MAX(0, \
+			MIN((x) + (w), (r).x_org + (r).width) \
+			- MAX((x), (r).x_org)) \
+		* MAX(0, \
+			MIN((y) + (h), (r).y_org + (r).height) \
+			- MAX((y), (r).y_org))\
+	)
 	i = 0;
 	if(parentwin == root && (info = XineramaQueryScreens(dpy, &n))){
 		XGetInputFocus(dpy, &w, &di);
-		if (mon >= 0 && mon < n)
-			i = mon;
+		if(args.mon >= 0 && args.mon < n)
+			i = args.mon;
 		else if(w != root && w != PointerRoot && w != None){
-			/* find top-level window containing current input focus */
+			/* find top-level window containing current input focus
+			 */
 			do{
-				if (XQueryTree(dpy, (pw = w), &dw, &w, &dws, &du) && dws)
+				if(		XQueryTree(dpy, (pw = w), &dw,
+							&w, &dws, &du)
+						&& dws)
 					XFree(dws);
 			}while(w != root && w != pw);
-			/* find xinerama screen with which the window intersects most */
+			/* find xinerama screen with which the window
+			 * intersects most */
 			if(XGetWindowAttributes(dpy, pw, &wa))
 				for(j = 0; j < n; j++)
-					if ((a = INTERSECT(wa.x, wa.y, wa.width, wa.height, info[j])) > area) {
+					if(		(a = INTERSECT(wa.x,
+								wa.y, wa.width,
+								wa.height,
+								info[j]))
+							> area){
 						area = a;
 						i = j;
 					}
 		}
 		/* no focused window is on screen, so use pointer location instead */
-		if (mon < 0 && !area && XQueryPointer(dpy, root, &dw, &dw, &x, &y, &di, &di, &du))
+		if(		args.mon < 0
+				&& !area
+				&& XQueryPointer(dpy, root, &dw, &dw, &x, &y,
+					&di, &di, &du))
 			for(i = 0; i < n; i++)
 				if(INTERSECT(x, y, 1, 1, info[i]))
 					break;
 
 		x = info[i].x_org;
-		y = info[i].y_org + (topbar ? 0 : info[i].height - mh);
+		y = info[i].y_org + (args.topbar ? 0 : info[i].height - mh);
 		mw = info[i].width;
 		XFree(info);
 	} else
-#endif
+#endif /* ifdef XINERAMA */
 	{
-		if (!XGetWindowAttributes(dpy, parentwin, &wa))
-			die("could not get embedding window attributes: 0x%lx",
-			    parentwin);
+		if(!XGetWindowAttributes(dpy, parentwin, &wa)){
+			fprintf(stderr, 
+				"%s: could not get embedding window"
+				"attributes: 0x%lx\n",
+				argv[0], parentwin);
+			return EX_UNAVAILABLE; /* appropriate sysexit? */
+		}
 		x = 0;
-		y = topbar ? 0 : wa.height - mh;
+		y = args.topbar ? 0 : wa.height - mh;
 		mw = wa.width;
 	}
-	inputw = MIN(inputw, mw/3);
 
 	/* create menu window */
 	swa.override_redirect = True;
-	swa.background_pixel = scheme[Scheme][ColBg].pixel;
+	swa.background_pixel = bg.pixel;
 	swa.event_mask = ExposureMask | KeyPressMask | VisibilityChangeMask;
 	win = XCreateWindow(dpy, parentwin, x, y, mw, mh, 0,
 	                    CopyFromParent, CopyFromParent, CopyFromParent,
@@ -190,7 +228,7 @@ main(int argc, char *argv[]){
 
 
 	XMapRaised(dpy, win);
-	if (embed) {
+	if (args.embed != NULL) {
 		XSelectInput(dpy, parentwin, FocusChangeMask | SubstructureNotifyMask);
 		if (XQueryTree(dpy, parentwin, &dw, &w, &dws, &du) && dws) {
 			for (i = 0; i < du && dws[i] != win; ++i)
@@ -199,6 +237,7 @@ main(int argc, char *argv[]){
 		}
 	}
 	drw_resize(drw, mw, mh);
+	drw_setscheme(drw, fg, bg);
 
 	text[0] = '\0';
 	do{
@@ -207,7 +246,6 @@ main(int argc, char *argv[]){
 		if(text[i] == '\n')
 			text[i] = '\0';
 
-		drw_setscheme(drw, scheme[Scheme]);
 		drw_rect(drw, 0, 0, mw, mh, 1, 1);
 
 		if(*text != '\0')
@@ -221,11 +259,9 @@ main(int argc, char *argv[]){
 		drw_map(drw, win, 0, 0, mw, mh);
 	}while(
 		fgets(text, (sizeof text) / (sizeof *text), stdin) != NULL
-		|| !BREAK_ON_EOF
+		|| !args.break_on_eof
 	);
 
-	for (i = 0; i < SchemeLast; i++)
-		free(scheme[i]);
 	drw_free(drw);
 	XSync(dpy, False);
 	XCloseDisplay(dpy);

dmenubar/drw.c

@@ -1,12 +1,16 @@
 /* See LICENSE file for copyright and license details. */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <X11/Xlib.h>
+#include <stdarg.h> /* va_start(3), va_end(3), va_list */
+#include <stdio.h> /* fputc(3), perror(3) */
+#include <stdlib.h> /* calloc(3), exit(3) */
+#include <string.h> /* strlen(3) */
+#include <X11/Xlib.h> /* Display */
 #include <X11/Xft/Xft.h>
 
 #include "drw.h"
-#include "util.h"
+
+#define MAX(A, B) ((A) > (B) ? (A) : (B))
+#define MIN(A, B) ((A) < (B) ? (A) : (B))
+#define BETWEEN(X, A, B) ((A) <= (X) && (X) <= (B))
 
 #define UTF_INVALID 0xFFFD
 #define UTF_SIZ     4
@@ -16,6 +20,34 @@ static const unsigned char utfmask[UTF_SIZ + 1] = {0xC0, 0x80, 0xE0, 0xF0, 0xF8}
 static const long utfmin[UTF_SIZ + 1] = {       0,    0,  0x80,  0x800,  0x10000};
 static const long utfmax[UTF_SIZ + 1] = {0x10FFFF, 0x7F, 0x7FF, 0xFFFF, 0x10FFFF};
 
+void
+die(const char *fmt, ...) {
+	va_list ap;
+
+	va_start(ap, fmt);
+	vfprintf(stderr, fmt, ap);
+	va_end(ap);
+
+	if (fmt[0] && fmt[strlen(fmt)-1] == ':') {
+		fputc(' ', stderr);
+		perror(NULL);
+	} else {
+		fputc('\n', stderr);
+	}
+
+	exit(1);
+}
+
+void *
+ecalloc(size_t nmemb, size_t size)
+{
+	void *p;
+
+	if (!(p = calloc(nmemb, size)))
+		die("calloc:");
+	return p;
+}
+
 static long
 utf8decodebyte(const char c, size_t *i)
 {
@@ -194,7 +226,7 @@ drw_fontset_free(Fnt *font)
 }
 
 void
-drw_clr_create(Drw *drw, Clr *dest, const char *clrname)
+drw_clr_create(Drw *drw, XftColor *dest, const char *clrname)
 {
 	if (!drw || !dest || !clrname)
 		return;
@@ -205,23 +237,6 @@ drw_clr_create(Drw *drw, Clr *dest, const char *clrname)
 		die("error, cannot allocate color '%s'", clrname);
 }
 
-/* Wrapper to create color schemes. The caller has to call free(3) on the
- * returned color scheme when done using it. */
-Clr *
-drw_scm_create(Drw *drw, const char *clrnames[], size_t clrcount)
-{
-	size_t i;
-	Clr *ret;
-
-	/* need at least two colors for a scheme */
-	if (!drw || !clrnames || clrcount < 2 || !(ret = ecalloc(clrcount, sizeof(XftColor))))
-		return NULL;
-
-	for (i = 0; i < clrcount; i++)
-		drw_clr_create(drw, &ret[i], clrnames[i]);
-	return ret;
-}
-
 void
 drw_setfontset(Drw *drw, Fnt *set)
 {
@@ -230,18 +245,20 @@ drw_setfontset(Drw *drw, Fnt *set)
 }
 
 void
-drw_setscheme(Drw *drw, Clr *scm)
+drw_setscheme(Drw *drw, XftColor fg, XftColor bg)
 {
-	if (drw)
-		drw->scheme = scm;
+	if (drw) {
+		drw->bg = bg;
+		drw->fg = fg;
+	}
 }
 
 void
 drw_rect(Drw *drw, int x, int y, unsigned int w, unsigned int h, int filled, int invert)
 {
-	if (!drw || !drw->scheme)
+	if (!drw || !drw->bg || !drw->fg)
 		return;
-	XSetForeground(drw->dpy, drw->gc, invert ? drw->scheme[ColBg].pixel : drw->scheme[ColFg].pixel);
+	XSetForeground(drw->dpy, drw->gc, invert ? drw->bg.pixel : drw->fg.pixel);
 	if (filled)
 		XFillRectangle(drw->dpy, drw->drawable, drw->gc, x, y, w, h);
 	else
@@ -266,13 +283,13 @@ drw_text(Drw *drw, int x, int y, unsigned int w, unsigned int h, unsigned int lp
 	XftResult result;
 	int charexists = 0;
 
-	if (!drw || (render && !drw->scheme) || !text || !drw->fonts)
+	if (!drw || (render && (!drw->bg || !drw->fg)) || !text || !drw->fonts)
 		return 0;
 
 	if (!render) {
 		w = ~w;
 	} else {
-		XSetForeground(drw->dpy, drw->gc, drw->scheme[invert ? ColFg : ColBg].pixel);
+		XSetForeground(drw->dpy, drw->gc, (invert ? drw->fg : drw->bg).pixel);
 		XFillRectangle(drw->dpy, drw->drawable, drw->gc, x, y, w, h);
 		d = XftDrawCreate(drw->dpy, drw->drawable,
 		                  DefaultVisual(drw->dpy, drw->screen),
@@ -322,7 +339,7 @@ drw_text(Drw *drw, int x, int y, unsigned int w, unsigned int h, unsigned int lp
 
 				if (render) {
 					ty = y + (h - usedfont->h) / 2 + usedfont->xfont->ascent;
-					XftDrawStringUtf8(d, &drw->scheme[invert ? ColBg : ColFg],
+					XftDrawStringUtf8(d, &(invert ? drw->bg : drw->fg),
 					                  usedfont->xfont, x, ty, (XftChar8 *)buf, len);
 				}
 				x += ew;

dmenubar/drw.h

@@ -16,14 +16,16 @@ enum { ColFg, ColBg }; /* Clr scheme index */
 typedef XftColor Clr;
 
 typedef struct {
-	unsigned int w, h;
+	XftColor bg;
 	Display *dpy;
-	int screen;
-	Window root;
 	Drawable drawable;
-	GC gc;
-	Clr *scheme;
+	XftColor fg;
 	Fnt *fonts;
+	GC gc;
+	unsigned int h;
+	Window root;
+	int screen;
+	unsigned int w;
 } Drw;
 
 /* Drawable abstraction */
@@ -47,7 +49,7 @@ void drw_cur_free(Drw *drw, Cur *cursor);
 
 /* Drawing context manipulation */
 void drw_setfontset(Drw *drw, Fnt *set);
-void drw_setscheme(Drw *drw, Clr *scm);
+void drw_setscheme(Drw *drw, XftColor fg, XftColor bg);
 
 /* Drawing functions */
 void drw_rect(Drw *drw, int x, int y, unsigned int w, unsigned int h, int filled, int invert);

homepage-bookmarks/README.txt

@@ -0,0 +1,3 @@
+homepage-bookmarks
+
+my bookmarks, punk. got something to say about it?

homepage-bookmarks/bookmarks.py

@@ -1,11 +1,11 @@
 from json import dumps, loads
 
-bookmarks = "bookmarks.json"
+bookmarks_filename = "bookmarks.json"
 
 def load():
-    with open(bookmarks) as f:
+    with open(bookmarks_filename) as f:
         return loads(f.read())
 
 def store(b):
-    with open(bookmarks + ".new", 'w') as f:
+    with open(bookmarks_filename + ".new", 'w') as f:
         return f.write(dumps(b))

lib3/include/lstring.h

@@ -0,0 +1,16 @@
+/* #include <stdint.h> /* uint8_t, uint16_t, uint32_t, uint64_t */
+
+/* This interface was conceived by an anonymous contributor. Library functions
+ * were needed for their undisclosed uses. This could be copyrighted. */
+typedef struct  lstr8 {  uint8_t len; char *str; } __packed  lstr8;
+typedef struct lstr16 { uint16_t len; char *str; } __packed lstr16;
+typedef struct lstr32 { uint32_t len; char *str; } __packed lstr32;
+typedef struct lstr64 { uint64_t len; char *str; } __packed lstr64;
+
+/* Okay, the rest of this is */
+/* public domain. dtb. 2024. */// :3 <3 -3
+
+ lstr8  *lstr8_next( lstr8 *current);
+lstr16 *lstr16_next(lstr16 *current);
+lstr32 *lstr32_next(lstr32 *current);
+lstr64 *lstr64_next(lstr64 *current);

lib3/src/lstring.c

@@ -0,0 +1,17 @@
+/* public domain. dtb. 2024. */// :3 <3 -3
+
+#include <stdint.h>
+#include "lstring.h"
+
+/* Returns the address immediately following the current lstr. */
+#define RETEXP(type) \
+	&((uint8_t *)(current))[sizeof type + sizeof char * current->len - 1]
+/*                          |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *                          | This is the size (in bytes) of the lstr8,
+ *                          | ASSUMING the string contents are stored as part
+ *                          | of the struct (i.e. str == &len[1]). */
+ lstr8  *lstr8_next( lstr8 *current){ return RETEXP( lstr8); }
+lstr16 *lstr16_next(lstr16 *current){ return RETEXP(lstr16); }
+lstr32 *lstr32_next(lstr32 *current){ return RETEXP(lstr32); }
+lstr64 *lstr64_next(lstr64 *current){ return RETEXP(lstr64); }
+#undef RETEXP

libpsargs/Makefile

@@ -1 +1,3 @@
+CFLAGS += -g
+
 libpsargs.o:

lowercase/Makefile

@@ -1,4 +1,10 @@
-all: lowercase-ascii uppercase-ascii
+all: lowercase uppercase
+
+lowercase: lowercase-ascii
+	mv lowercase-ascii lowercase
+
+uppercase: uppercase-ascii
+	mv uppercase-ascii uppercase
 
 lowercase-ascii: case.c case-ascii.h
 	$(CC) -DCONV=TOLOWER -include case-ascii.h -o lowercase-ascii case.c

lowercase/lowercase.1

@@ -6,24 +6,19 @@ lowercase \(en make text lowercase
 
 .SH SYNOPSIS
 
-lowercase (-f)
+lowercase
 
 .SH DESCRIPTION
 
-Lowercase prints text from standard input to standard output as lowercase.
-
-.SH DIAGNOSTICS
-
-Lowercase will print an error message and exit with the appropriate status from sysexits(3) if it attempts
-to process a glyph outside the supported encoding range; this is to not inadverdently mangle multi-byte
-characters. The -f option exists to override this and process every character anyway.
+Lowercase prints text from standard input to standard output as lowercase. It
+passes through text it can't convert.
 
 .SH BUGS
 
-Lowercase is not Unicode aware unless it's compiled with the USE_ICU flag, which requires libicu.
-This isn't tested to any extent.
+Lowercase is not Unicode aware.
 .PP
-Lowercase is redundant to usages of tr(1) among other POSIX-specified utilities.
+Lowercase is redundant to usages of tr(1) among other POSIX-specified
+utilities.
 
 .SH HISTORY
 

niceties/data

@@ -70,13 +70,13 @@ get_memory_usage() {
 PUBLIC_IP="$(ifpublic)"
 
 printbar() {
-	printf "%b" "$(get_current_desktop)"
+#	printf "%b" "$(get_current_desktop)"
 	printf "%b" $($DATE)
 	printf "%b" "$DELIMITER"
 	printf "%b" "BAT: $(battery)"
 	printf "%b" "$DELIMITER"
-	printf "%b" "CPU: $(get_cpu_temp)"
-	printf "%b" "$DELIMITER"
+#	printf "%b" "CPU: $(get_cpu_temp)"
+#	printf "%b" "$DELIMITER"
 	printf "%b" "PuIP: $PUBLIC_IP"
 	#printf "%b" "$DELIMITER"
 	#printf "%b" "MEM: $(get_memory_usage)"

niceties/openbsd

@@ -0,0 +1,139 @@
+#!/bin/sh
+
+set -e
+
+# found this here... may auto install openbsd... may not... who knows
+
+prog(){ while test -n "$!" # ask your doctor about progesterone
+	do	if ! command -v "$1" >/dev/null
+		then	printf '%s: %s command not found. Please install it.\n' \
+				"$0" "$1" 1>&2
+			false
+fi	done	}
+
+prog curl
+if ! prog signify
+then	if prog signify-openbsd
+	then	alias signify=signify-openbsd
+	else	false
+fi	fi
+
+OBSD="$HOME"/OpenBSD
+REL=7.5
+SREL="$(printf '%s\n' "$REL" | tr -d .)"
+
+test -n "$ARCH" \
+||	case "$(uname -m)" in
+#	aarch64) ARCH=arm64   ;;
+	amd64)   ARCH=amd64   ;;
+#	arm64)   ARCH=arm64   ;;
+	i386)    ARCH=i386    ;;
+#	*)       ARCH=riscv64 ;;
+	*)       ARCH=arm64   ;;
+	esac
+
+test -n "$MIRROR" \
+	|| MIRROR=ftp://mirrors.mit.edu/pub/OpenBSD
+
+case "$ARCH" in
+amd64) QEMU=x86_64  ;;
+i386)  QEMU=i386    ;;
+*)     QEMU=aarch64 ;;
+esac
+
+printf '%s: enter a public SSH key for accessing the virtual machine.\n:: ' "$0"
+PUBSSH="$(head -n 1)"
+printf "\
+%s: Setting up a virtualized OpenBSD %s (%s) instance from the mirror %s.
+%s: Control+C to cancel. Waiting 10s to continue...
+"	"$0" "$REL" "$ARCH" "$MIRROR" \
+	"$0" 1>&2
+sleep 10
+
+# <https://www.skreutz.com/posts/autoinstall-openbsd-on-qemu/>
+
+mkdir -p "$OBSD"/mirror/pub/OpenBSD/"$REL"/"$ARCH"
+curl -O --output-dir "$OBSD"/mirror/pub/OpenBSD/"$REL"/ \
+	https://ftp.openbsd.org/pub/OpenBSD/"$REL"/openbsd-"$SREL"-base.pub
+
+for f in	SHA256.sig bsd bsd.mp bsd.rd pxeboot \
+		base"$SREL".tgz comp"$SREL".tgz man"$SREL".tgz
+do	curl -O --output-dir "$OBSD"/mirror/pub/OpenBSD/"$REL"/"$ARCH" \
+		"$MIRROR"/"$REL"/"$ARCH"/"$f" 
+done
+signify -C -p "$OBSD"/mirror/pub/OpenBSD/"$REL"/openbsd-"$SREL"-base.pub \
+	-x "$OBSD"/mirror/pub/OpenBSD/"$REL"/"$ARCH"/SHA256.sig \
+	-- bsd* pxeboot *"$SREL".tgz
+
+printf "\
+%s: Using the following autoinstall(8) install.conf:
+	Change the default console to com0 = yes
+	Which speed should com0 use = 115200
+	System hostname = openbsd
+	Password for root = *************
+	Allow root ssh login = no
+	Setup a user = puffy
+	Password for user = *************
+	Public ssh key for user = %s
+	What timezone are you in = UTC
+	Location of sets = http
+	HTTP Server = 10.33.2.1
+	Unable to connect using https. Use http instead = yes
+	URL to autopartitioning template for disklabel = http://10.33.2.1/disklabel
+	Set name(s) = site%s.tgz
+	Checksum test for site%s.tgz failed. Continue anyway = yes
+	Unverified sets: site%s.tgz. Continue without verification = yes
+" "$0" "$PUBSSH" "$SREL" "$SREL" "$SREL" \
+	| tee -a /dev/stderr \
+	| sed -e 1d -e 's:^\t::g' \
+	>"$OBSD"/mirror/install.conf
+
+printf "\
+%s: Using the following disklabel(8) template:
+	/    8G
+	swap 256M
+" "$0" \
+	| tee -a /dev/stderr \
+	| sed -e 1d -e 's:^\t::g' \
+	>"$OBSD"/mirror/disklabel
+
+mkdir -p site
+printf "\
+#!/bin/sh
+printf 'https://cdn.openbsd.org/pub/OpenBSD\n' \
+	>/etc/installurl
+printf 'permit keepenv nopass :wheel\n' \
+	>>/etc/doas.conf
+"	>"$OBSD"/site/install.site
+chmod +x "$OBSD"/site/install.site
+tar -C site czf "$OBSD"/mirror/pub/OpenBSD/"$REL"/"$ARCH"/site"$SREL".tgz
+# probably not necessary
+#ls -l "$OBSD"/mirror/pub/OpenBSD/"$REL"/"$ARCH" >"$OBSD"/index.txt
+
+mkdir -p tftp/etc
+ln "$OBSD"/mirror/pub/OpenBSD/"$REL"/"$ARCH"/pxeboot "$OBSD"/tftp/auto_install
+ln "$OBSD"/mirror/pub/OpenBSD/"$REL"/"$ARCH"/bsd.rd "$OBSD"/tftp/bsd.rd
+printf "\
+stty com0 115200
+set tty com0
+boot tftp:/bsd.rd
+" >"$OBSD"/tftp/etc/boot.conf
+
+qemu-img create -f qcow2 "$OBSD"/hd0.qcow2 9G
+
+chmod +x
+
+python3 -m http.server --directory "$OBSD"/mirror --bind 127.0.0.1 8080 &
+
+qemu-system-"$QEMU" \
+		-drive file=\"\$OBSD\"/hd0.qcow2,media=disk,if=virtio \
+		-device e1000,netdev=n1 \
+		-m 512M \
+		-netdev user,id=n1,hostname=openbsd-vm,tftp-server-name=10.0.2.1,tftp=tftp,bootfile=auto_install,hostfwd=tcp::2222-:22,guestfwd=tcp:10.0.2.1:80-cmd:socat STDIO TCP4:127.0.0.1:8080 \
+		-nographic &
+
+printf "\
+%s: ssh into puffy@127.0.0.1:2222 to connect.
+%s: press Enter to quit.
+" "$0" "$0" 1>&2
+head -n 1

niceties/uwu

@@ -4,7 +4,7 @@
 # Not a great use of disk...
 dd 2>/dev/null \
 | sed \
-	-e 's/l/w/g' \
-	-e 's/r/w/g' \
-	-e 's/smaww/smol/g' \
-	-e 's/wove/wuv/g'
+	-e s/l/w/g \
+	-e s/r/w/g \
+	-e s/smaww/smol/g \
+	-e s/wove/wuv/g

niceties/volume

@@ -52,7 +52,7 @@ case "$1" in
 -) "$0" r -"$2" ;;
 
 a*)
-	str isvalue $2 && ! str isvalue $3 && str isdigit "$2" \
+	test -n $2 && ! str isvalue $3 && str isdigit "$2" \
 		|| usage
 	"$0".$VOLUME_SYSTEM "$@"
 	;;

npc.rs

@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2023 DTB <trinity@trinity.moe>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+use std::{
+	env::args,
+	io::{ stdin, stdout, Error, Read, Write },
+	process::ExitCode
+};
+
+extern crate getopt;
+use getopt::{ Opt, Parser };
+
+extern crate sysexits;
+use sysexits::{ EX_OK, EX_OSERR, EX_USAGE };
+
+fn oserr(s: &str, e: Error) -> ExitCode {
+	eprintln!("{}: {}", s, e);
+	ExitCode::from(EX_OSERR as u8)
+}
+
+fn usage(s: &str) -> ExitCode {
+	eprintln!("Usage: {} (-aet)", s);
+	ExitCode::from(EX_USAGE as u8)
+}
+
+fn main() -> ExitCode {
+	let argv = args().collect::<Vec<String>>();
+	let input = stdin();
+	let mut output = stdout().lock();
+
+	let mut opts = Parser::new(&argv, "7et");
+	let mut ascii = false;
+	let mut showend = false;
+	let mut showtab = false;
+
+	loop {
+		match opts.next() {
+			None => break,
+			Some(o) =>
+				match o {
+					Ok(Opt('7', None)) => ascii = true,
+					Ok(Opt('e', None)) => showend = true,
+					Ok(Opt('t', None)) => showtab = true,
+					_ => { return usage(&argv[0]); }
+				}
+		}
+	}
+
+	/* cat -v emulation */
+	if ascii {
+		let mut c: u8 = 0;
+
+		for r in input.bytes() {
+			match r {
+				Ok(v) => { c = v; },
+				Err(e) => { return oserr(&argv[0], e); }
+			}
+			/* If a given byte isn't expressable in ASCII, print "M-[char]",
+			 * where char is the chosen representation of the byte with its
+			 * high bit set to 0. */
+			if c & 0x80 /* 0b 1000 0000 */ != 0 { print!("M-"); }
+			c ^= 0x80;
+
+			/* ASCII DEL is represented as ^? */
+			if c == 0x7f as u8 {
+				if let Err(e) = output.write_all(b"^?") {
+					return oserr(&argv[0], e);
+				}
+				break;
+			}
+
+			if c == '\n' as u8 && showend {
+				if let Err(e) = output.write_all(b"$") {
+					return oserr(&argv[0], e);
+				}
+			}
+
+			/* ASCII visual characters are shown literally. */
+			if c >= ' ' as u8 || c == '\n' as u8
+					|| (!showtab && c == '\t' as u8) {
+				if let Err(e) = output.write_all(&[c]) {
+					return oserr(&argv[0], e);
+				}
+			}
+
+			/* Otherwise, characters are shown as their control code, with NUL
+			 * being ^@ and successive characters shown as "^" catenated with
+			 * successive visual characters past "@". */
+			else {
+				c += '@' as u8;
+				if let Err(e) = output.write_all(b"^") {
+					return oserr(&argv[0], e);
+				}
+				if let Err(e) = output.write_all(&[c]) {
+					return oserr(&argv[0], e);
+				}
+			}
+		}
+	} else {
+		eprintln!("not implemented");
+	}
+
+	ExitCode::from(EX_OK as u8)
+}

psrelay/psrelay.c

@@ -1,6 +1,6 @@
 #include <fcntl.h> /* open(2), O_RDONLY */
 #include <stdio.h> /* fprintf(3), perror(3) */
-#if !defined EX_OK || !defined EX_OSERR || !defined EX_USAGE
+#if !defined EX_OSERR || !defined EX_USAGE
 #	include <sysexits.h>
 #endif
 #include <unistd.h> /* dup(2), dup2(2), fork(2), STDIN_FILENO */

roll/Makefile

@@ -1,14 +1,5 @@
-TARGETS = roll
-
-all: $(TARGETS)
-
+CFLAGS += -g
+roll: roll.c
+.PHONY: clean
 clean:
-	rm -f $(TARGETS)
-
-sane: roll.c ../include/sysexits.h
-	$(CC) -DDONT_USE_SYSTEM_SYSEXITS -o roll roll.c
-
-roll: %.c
-	$(CC) -o $@ $@.c
-
-.PHONY: all clean sane
+	rm roll.c

rot/rot13

@@ -1,3 +0,0 @@
-#!/bin/sh
-
-exec rot 13

soft/android-udev-rules

@@ -6,9 +6,9 @@ UPSTREAM=https://github.com/M0Rf30/android-udev-rules.git
 . soft
 
 # rather than requiring user to be in `adbusers`, just use group wheel
-sed -i .orig -e s.adbusers.wheel.g "$SRC"/51-android.rules
+sed s.adbusers.wheel.g <"$SRC"/51-android.rules >"$SRC"/51-android.rules.new
 mkdir -p /etc/udev/rules.d
-cp "$SRC"/51-android.rules /etc/udev/rules.d/51-android.rules
+cp "$SRC"/51-android.rules.new /etc/udev/rules.d/51-android.rules
 chmod a+r /etc/udev/rules.d/51-android.rules
 
 soft_advise '#' udevadm control --reload-rules

soft/man-pages-posix2017

@@ -14,3 +14,4 @@ stream_license(){
 . soft
 
 cp "$SRC"/man0p "$SRC"/man1p "$SRC"/man3p "$MAN"
+makewhatis "$MAN"

soft/nethack_3.6.7

@@ -0,0 +1,23 @@
+#!/bin/sh
+
+NAME=nethack
+VERSION=3.6.7
+UPSTREAM=https://www.nethack.org/download/3.6.7/nethack-367-src.tgz
+UPSTREAM_TYPE=custom
+get_upstream(){
+	curl "$UPSTREAM" | gzip -cd | tar x -C "$PREFIX/src"
+	mv "$PREFIX/src/NetHack-3.6.7" "$SRC"
+}
+. soft
+
+NETHACKDIR="$PREFIX/games/nethackdir"
+mkdir -p "$NETHACKDIR"
+
+# depends on
+#	ncurses-libtinfo-devel
+sed -i .orig -e "22s_^\$_PREFIX = $PREFIX_" "$SRC"/sys/unix/Makefile.top
+sh -c 'cd "$SRC"/sys/unix; sh setup.sh hints/linux'
+sed -i .orig -e "355s_^\$_#define HACKDIR \"$NETHACKDIR\"_" \
+	"$SRC"/include/config.h # TODO better way to define HACKDIR?
+$GMAKE -C "$SRC" all
+$GMAKE -C "$SRC" install

soft/soft

@@ -11,6 +11,7 @@ FONTS="$SHARE"/fonts
 LICENSES="$PREFIX"/licenses
 MAN="$PREFIX"/man
 SRC="$PREFIX/src/$NAME"
+mkdir -p "$BIN" "$SHARE" "$FONTS" "$LICENSES" "$MAN" "$SRC"
 
 soft_advise(){
 	printf "\
@@ -24,8 +25,8 @@ custom)	;;
 		case "$UPSTREAM_TYPE" in
 		custom)	;;
 		http*)	mkdir -p "$SRC"
-			curl -O "$UPSTREAM" --output-dir "$SRC" ;;
-		git)	git clone "$UPSTREAM" "$SRC" ;;
+			curl -LO "$UPSTREAM" --output-dir "$SRC" ;;
+		git)	git clone "$UPSTREAM" "$SRC" || git -C "$SRC" pull;;
 		*)	case "$UPSTREAM" in
 			git:*)	UPSTREAM_TYPE=git; get_upstream ;;
 			*.git)	UPSTREAM_TYPE=git; get_upstream ;;

soft/unscii-16-full-ttf

@@ -1,4 +1,6 @@
 NAME=unscii-16-full-ttf
+# I couldn't find this anywhere except the pkgsrc /fonts/unscii/Makefile
+LICENSE=gpl20
 VERSION=nightly
 UPSTREAM=http://viznut.fi/unscii/unscii-16-full.ttf
 UPSTREAM_TYPE=http

soft/wip/arduino18

@@ -0,0 +1,293 @@
+# System utilities
+CC = cc
+CFLAGS = -Iinclude/ -Ilib/ -g -Wall -Wextra -Wpedantic
+HOME = /home/trinity
+PREFIX = /usr/local
+RM = rm -f
+
+all:
+
+HOMEPAGE_FILES = homepage propaganda/*
+dist/homepage:
+	mkdir -p dist/homepage.tmp
+	cp $(HOMEPAGE_FILES) dist/homepage.tmp
+	cd dist/homepage.tmp; sh homepage; cd ../..
+	$(RM) dist/homepage.tmp/homepage dist/homepage.tmp/homepage.local
+	mv dist/homepage.tmp dist/homepage
+dist/homepage.tar.gz: dist/homepage
+	tar cz -C dist/homepage . >dist/homepage.tar.gz
+
+# i made this script to fetch icons for my grandmother and put them in icons/
+# so i wouldn't have to fetch the icons for her desktop when i made her a new
+# system.
+# i could have downloaded all the icons and put them into a repo for her but
+# this uses less space
+dist/grammy:	dist/grammy.tmp/989wclz.com.png \
+		dist/grammy.tmp/amazon.com.ico \
+		dist/grammy.tmp/bangordailynews.com.png \
+		dist/grammy.tmp/theguardian.com.png \
+		dist/grammy.tmp/centralmaine.com.png \
+		dist/grammy.tmp/dictionary.com.png \
+		dist/grammy.tmp/google.com.jpg \
+		dist/grammy.tmp/longfellowsgreenhouses.com.jpg \
+		dist/grammy.tmp/mainepublic.org.png \
+		dist/grammy.tmp/news.google.com.png \
+		dist/grammy.tmp/newscentermaine.com.png \
+		dist/grammy.tmp/pressherald.com.png \
+		dist/grammy.tmp/weather.com.png
+	mv dist/grammy.tmp dist/grammy
+dist/grammy.tmp:
+	mkdir -p dist/grammy.tmp
+dist/grammy.tmp/989wclz.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/989wclz.com.png" "https://web.archive.org/web/20200629174002if_/https://989wclz.com/wp-content/themes/wclz/img/touch-icon-144.png"
+dist/grammy.tmp/amazon.com.ico: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/amazon.com.ico" "https://web.archive.org/web/20200718050400if_/https://www.amazon.com/favicon.ico"
+dist/grammy.tmp/bangordailynews.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/bangordailynews.com.png" "http://web.archive.org/web/20200721195123if_/https://i0.wp.com/bdn-data.s3.amazonaws.com/uploads/2020/06/BDN-logo_green-3-1.png"
+dist/grammy.tmp/theguardian.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/theguardian.com.png" "https://web.archive.org/web/20200720041457if_/https://assets.guim.co.uk/images/favicons/fee5e2d638d1c35f6d501fa397e53329/152x152.png"
+dist/grammy.tmp/centralmaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/centralmaine.com.png" "https://web.archive.org/web/20200720023956if_/https://multifiles.pressherald.com/uploads/sites/2/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/dictionary.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/dictionary.com.png" "https://web.archive.org/web/20200719135458if_/https://www.dictionary.com/hp-assets/dcom_favicon-1bff2f1b49c077ed504e55c3649f2a4b.png"
+dist/grammy.tmp/google.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/google.com.jpg" "https://web.archive.org/web/20170621105937if_/https://yt3.ggpht.com/-v0soe-ievYE/AAAAAAAAAAI/AAAAAAAAAAA/OixOH_h84Po/s900-c-k-no/photo.jpg"
+dist/grammy.tmp/longfellowsgreenhouses.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/longfellowsgreenhouses.com.jpg" "https://web.archive.org/web/20200718173559im_/https://longfellowsgreenhouses.com/wp-content/uploads/2020/03/Longfellows-Logo-Light-Green.jpg"
+dist/grammy.tmp/mainepublic.org.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/mainepublic.org.png" "https://d3kle7qwymxpcy.cloudfront.net/images/broadcasts/e5/8e/30457/1/c300.png"
+dist/grammy.tmp/news.google.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/news.google.com.png" "https://upload.wikimedia.org/wikipedia/commons/0/0b/Google_News_icon.png"
+dist/grammy.tmp/newscentermaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/newscentermaine.com.png" "https://web.archive.org/web/20200721190548if_/https://www.newscentermaine.com/assets/favicons/WCSH.png?ver=2.4.7.4"
+dist/grammy.tmp/pressherald.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/pressherald.com.png" "https://multifiles.pressherald.com/uploads/sites/4/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/weather.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/weather.com.png" "https://upload.wikimedia.org/wikipedia/commons/thumb/7/77/The_Weather_Channel_logo_2005-present.svg/1200px-The_Weather_Channel_logo_2005-present.svg.png"
+
+dist/ifpublic:
+	cp ifpublic/ifpublic dist/
+
+dist/pschdir:
+	$(MAKE) -C pschdir
+	cp pschdir/pschdir dist/pschdir
+
+dist/spacer.bin:
+	# creates an 8GB empty file
+	# that way when the alarm bells go off you can delete it to save a
+	# couple minutes before the system really runs out of disk
+	#
+	#     512     * 16777216 = 8GB
+	dd bs=512 count=16777216 </dev/zero >dist/spacer.bin
+
+dist/str:
+	$(MAKE) -C str
+	cp str/str dist/
+
+dist/streq:
+	$(MAKE) -C streq
+	cp streq/streq dist/
+
+$(HOME)/.fonts/unscii-16-full.ttf:
+	mkdir -p $(HOME)/.fonts/
+	curl -o $(HOME)/.fonts/unscii-16-full.ttf.tmp http://viznut.fi/unscii/unscii-16-full.ttf
+	mv $(HOME)/.fonts/unscii-16-full.ttf.tmp $(HOME)/.fonts/unscii-16-full.ttf
+
+# I never finished this because I realized it needed OpenJDK. Fuck Java.
+# depends on
+#	apk:chimerautils (on Chimera Linux)
+#	apk:curl
+$(PREFIX)/src/arduino18:
+	# the person that made the tarball used the absolute file location in
+	# the sha512 file, so it looks like
+	# [sum]  /home/user/dir/tarball.tar.xz
+	# so filter out the file locations before diffing
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz.sha512 \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512
+	sha512sum arduino-1.8.19.tar.xz \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512.local
+	# if the sums differ the makefile will terminate
+	cat arduino-1.8.19.tar.xz.sha512 $(PREFIX)/src/arduino-1.8.19.tar.xz.sha512.local \
+		| uniq \
+		| wc -l \
+		| xargs echo \
+		| xargs test 1 =
+	xz -cd "$(PREFIX)"/src/arduino-1.8.19.tar.xz \
+		| tar -C "$(PREFIX)" x
+	mv "$(PREFIX)"/arduino-1.8.19 "$(PREFIX)"/arduino18
+
+$(PREFIX)/bin/bar:
+	git clone https://github.com/LemonBoy/bar.git "$(PREFIX)"/src/bar
+	$(MAKE) -C "$(PREFIX)"/src/bar PREFIX="$(PREFIX)" install
+
+# depends on
+# 	apk:clang
+# 	apk:git
+#	apk:gmake
+#	apk:libx11-devel
+#	apk:libxau-devel
+#	apk:libxcb-devel
+#	apk:libxinerama-devel
+#	apk:xcb-util-devel
+#	apk:xcb-util-keysyms-devel
+#	apk:xcb-util-wm-devel
+$(PREFIX)/bin/bspwm:
+	git clone https://github.com/baskerville/bspwm.git "$(PREFIX)"/src/bspwm
+	$(MAKE) -C "$(PREFIX)"/src/bspwm install
+
+# depends on:
+#	apk:git (build)
+#	apk:ncurses-devel (optional if curses.h is present on system)
+$(PREFIX)/bin/cmatrix:
+	git clone https://github.com/abishekvashok/cmatrix.git $(PREFIX)/src/cmatrix
+	sh -c 'cd "$(PREFIX)"/src/cmatrix; autoreconf -i && ./configure --prefix="$(PREFIX)"'
+	$(MAKE) -C "$(PREFIX)"/src/cmatrix install
+
+# game.tar should extract to
+# 'The Coffin of Andy and Leyley'/
+#	Game.exe
+#	[files on which Game.exe depends]
+# I originally got it as a RAR which I decompressed and packed into a TAR.
+# _CommonRedist/
+#	dotNetFx40_Full_setup.exe
+#	dxwebsetup.exe
+#	oalinst.exe
+#	vcredist_2015-2019_x64.exe
+#	vcredist_2015-2019_x86.exe
+#	vcredist_x64.exe
+#	vcredist_x86.exe
+#	xnafx40_redist.msi
+# depends on
+#	apk:curl
+#	apk:git
+#	apk:qemu-system-arm
+#	apk:xz
+$(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img:
+	mkdir -p "$(PREFIX)"/bin/coffin_files
+	curl http://downloads.raspberrypi.org/raspios_full_armhf/images/raspios_full_armhf-2021-11-08/2021-10-30-raspios-bullseye-armhf-full.zip -o "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+	tar -C "$(PREFIX)"/bin/coffin_files xf "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+#$(PREFIX)/bin/coffin: $(PREFIX)/bin/coffin_files/game.tar $(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img $(PREFIX)/src/qemu-rpi-kernel
+
+# Installs the Python script without documentation because I'm lazy and don't
+# wanna run the upstream Makefile and then deal with filtering out the Python
+# stuff (which is specific to 3.6 which is a little outdated).
+# depends on apk:git apk:python
+$(PREFIX)/bin/git-filter-repo:
+	git clone https://github.com/newren/git-filter-repo.git $(PREFIX)/src/git-filter-repo
+	$(INSTALL) -Dm0755 $(PREFIX)/src/git-filter-repo/git-filter-repo $(PREFIX)/bin/git-filter-repo
+
+# depends on
+#	apk:git
+#	apk:texinfo
+$(PREFIX)/bin/macchanger:
+	git clone https://github.com/alobbs/macchanger.git "$(PREFIX)"/src/macchanger
+	sh -c 'cd "$(PREFIX)"/src/macchanger; ./autogen.sh --prefix=/usr/local/'
+	# https://github.com/alobbs/macchanger/issues/14
+	sed -i .orig -e 's/caddr_t/void */' "$(PREFIX)"/src/macchanger/src/netinfo.c
+	$(MAKE) -C "$(PREFIX)"/src/macchanger install
+
+# nmap 7.80 is the last Free nmap release
+# depends on apk:linux-headers
+# had to # ln -s /bin/gmake /usr/local/bin/make
+# with clang 16.0.6 aarch75-chimera-linux-musl, cannot compile (4 errors?)
+$(PREFIX)/bin/nmap:
+	curl "https://nmap.org/dist/nmap-7.80.tar.bz2" | bzip2 -cd | tar x -C /usr/local/src/
+	cd /usr/local/src/nmap-7.80; ./configure --prefix=/usr/local
+	$(MAKE) -C /usr/local/src/nmap-7.80
+
+# depends on
+#	apk:git
+$(PREFIX)/bin/pandoc: $(PREFIX)/bin/cabal
+	git clone https://github.com/jgm/pandoc.git "$(PREFIX)"/src/pandoc.tmp
+	mv "$(PREFIX)"/pandoc.tmp "$(PREFIX)"/pandoc
+
+# depends on
+# 	apk:bison
+# 	apk:cairo-devel
+# 	apk:flex
+# 	apk:gdk-pixbuf-devel
+# 	apk:glib-devel
+# 	apk:libxkbcommon-devel
+# 	apk:pango-devel
+# 	apk:pkgconf
+# 	apk:meson
+# 	apk:startup-notification-devel
+# 	apk:xcb-util-cursor-devel
+$(PREFIX)/bin/rofi:
+	git clone https://davatorium/rofi.git $(PREFIX)/src/rofi
+	sh -c 'cd $(PREFIX)/src/rofi; meson setup build'
+	ninja -C $(PREFIX)/src/rofi/build install
+
+# depends on
+# 	apk:autoconf
+# 	apk:autoconf-archive
+# 	apk:imlib2-devel
+# 	apk:libxcomposite-devel
+# 	apk:libxfixes-devel
+$(PREFIX)/bin/scrot:
+	git clone https://github.com/resurrecting-open-source-projects/scrot.git "$(PREFIX)"/src/scrot
+	sh -c 'cd $(PREFIX)/src/scrot && ./autogen.sh && ./configure MAKE=$(MAKE) PREFIX=$(PREFIX)'
+	$(MAKE) -C $(PREFIX)/src/scrot install
+
+# depends on
+#	apk:g++
+$(PREFIX)/bin/unrar:
+	git clone https://github.com/pmachapman/unrar.git "$(PREFIX)"/src/unrar
+	$(MAKE) -C "$(PREFIX)"/src/unrar
+	$(INSTALL) -Dm0755 "$(PREFIX)"/src/unrar/unrar "$(PREFIX)"/bin/unrar
+
+# I tried final_official_2.50 but it wouldn't build
+# (ld: error: duplicate symbol: comDat)
+# depends on
+#	apk:sudo
+$(PREFIX)/src/wiringpi:
+	git clone https://github.com/WiringPi/WiringPi.git $(PREFIX)/src/wiringpi
+	git -C $(PREFIX)/src/wiringpi checkout 2.61-1
+	sed -i .old -e /^sudo/d $(PREFIX)/src/wiringpi/build
+	sed -i .old -e s/root\.root/root\:root/ $(PREFIX)/src/wiringpi/gpio
+	sh -c 'cd $(PREFIX)/src/wiringpi; sudo=sudo ./build'
+
+$(PREFIX)/bin/xdo:
+	git clone https://github.com/baskerville/xdo.git $(PREFIX)/src/xdo
+	$(MAKE) -C $(PREFIX)/src/xdo install
+
+$(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz:
+	mkdir -p $(PREFIX)/share/audacious/Skins
+	curl https://archive.org/download/winampskin_Sailor_Moon_Gang/Sailor_Moon_Gang.wsz -o $(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz
+
+# depends on
+#	apk:git
+$(PREFIX)/src/qemu-rpi-kernel:
+	git clone https://github.com/dhruvvyas90/qemu-rpi-kernel "$(PREFIX)"/src/qemu-rpi-kernel
+
+# depends on
+#	apk:git
+$(PREFIX)/src/moreutils:
+	git clone git://git.joeyh.name/moreutils "$(PREFIX)"/src/moreutils.tmp
+	mv "$(PREFIX)"/src/moreutils.tmp "$(PREFIX)"/src/moreutils
+
+# depends on
+#	apk:git
+$(PREFIX)/src/syslinux:
+	git clone --recursive https://repo.or.cz/syslinux.git "$(PREFIX)"/src/syslinux
+
+.PHONY: android-udev-rules
+android-udev-rules:
+	git clone https://github.com/M0Rf30/android-udev-rules.git "$(PREFIX)"/src/android-udev-rules
+	# rather than requiring user to be in `adbusers`, just use group wheel
+	sed -i .orig -e s/adbusers/wheel/g "$(PREFIX)"/src/android-udev-rules/51-android.rules
+	mkdir -p /etc/udev/rules.d
+	cp "$(PREFIX)"/src/android-udev-rules/51-android.rules /etc/udev/rules.d/51-android.rules
+	chmod a+r /etc/udev/rules.d/51-android.rules
+	udevadm control --reload-rules
+	# assumes dinit
+	dinitctl restart udevd
+
+
+.PHONY: unscii-pkgsrc
+unscii-pkgsrc:
+	$(MAKE) -C /usr/pkgsrc/fonts/unscii install clean clean-depends

soft/wip/coffin

@@ -0,0 +1,293 @@
+# System utilities
+CC = cc
+CFLAGS = -Iinclude/ -Ilib/ -g -Wall -Wextra -Wpedantic
+HOME = /home/trinity
+PREFIX = /usr/local
+RM = rm -f
+
+all:
+
+HOMEPAGE_FILES = homepage propaganda/*
+dist/homepage:
+	mkdir -p dist/homepage.tmp
+	cp $(HOMEPAGE_FILES) dist/homepage.tmp
+	cd dist/homepage.tmp; sh homepage; cd ../..
+	$(RM) dist/homepage.tmp/homepage dist/homepage.tmp/homepage.local
+	mv dist/homepage.tmp dist/homepage
+dist/homepage.tar.gz: dist/homepage
+	tar cz -C dist/homepage . >dist/homepage.tar.gz
+
+# i made this script to fetch icons for my grandmother and put them in icons/
+# so i wouldn't have to fetch the icons for her desktop when i made her a new
+# system.
+# i could have downloaded all the icons and put them into a repo for her but
+# this uses less space
+dist/grammy:	dist/grammy.tmp/989wclz.com.png \
+		dist/grammy.tmp/amazon.com.ico \
+		dist/grammy.tmp/bangordailynews.com.png \
+		dist/grammy.tmp/theguardian.com.png \
+		dist/grammy.tmp/centralmaine.com.png \
+		dist/grammy.tmp/dictionary.com.png \
+		dist/grammy.tmp/google.com.jpg \
+		dist/grammy.tmp/longfellowsgreenhouses.com.jpg \
+		dist/grammy.tmp/mainepublic.org.png \
+		dist/grammy.tmp/news.google.com.png \
+		dist/grammy.tmp/newscentermaine.com.png \
+		dist/grammy.tmp/pressherald.com.png \
+		dist/grammy.tmp/weather.com.png
+	mv dist/grammy.tmp dist/grammy
+dist/grammy.tmp:
+	mkdir -p dist/grammy.tmp
+dist/grammy.tmp/989wclz.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/989wclz.com.png" "https://web.archive.org/web/20200629174002if_/https://989wclz.com/wp-content/themes/wclz/img/touch-icon-144.png"
+dist/grammy.tmp/amazon.com.ico: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/amazon.com.ico" "https://web.archive.org/web/20200718050400if_/https://www.amazon.com/favicon.ico"
+dist/grammy.tmp/bangordailynews.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/bangordailynews.com.png" "http://web.archive.org/web/20200721195123if_/https://i0.wp.com/bdn-data.s3.amazonaws.com/uploads/2020/06/BDN-logo_green-3-1.png"
+dist/grammy.tmp/theguardian.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/theguardian.com.png" "https://web.archive.org/web/20200720041457if_/https://assets.guim.co.uk/images/favicons/fee5e2d638d1c35f6d501fa397e53329/152x152.png"
+dist/grammy.tmp/centralmaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/centralmaine.com.png" "https://web.archive.org/web/20200720023956if_/https://multifiles.pressherald.com/uploads/sites/2/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/dictionary.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/dictionary.com.png" "https://web.archive.org/web/20200719135458if_/https://www.dictionary.com/hp-assets/dcom_favicon-1bff2f1b49c077ed504e55c3649f2a4b.png"
+dist/grammy.tmp/google.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/google.com.jpg" "https://web.archive.org/web/20170621105937if_/https://yt3.ggpht.com/-v0soe-ievYE/AAAAAAAAAAI/AAAAAAAAAAA/OixOH_h84Po/s900-c-k-no/photo.jpg"
+dist/grammy.tmp/longfellowsgreenhouses.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/longfellowsgreenhouses.com.jpg" "https://web.archive.org/web/20200718173559im_/https://longfellowsgreenhouses.com/wp-content/uploads/2020/03/Longfellows-Logo-Light-Green.jpg"
+dist/grammy.tmp/mainepublic.org.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/mainepublic.org.png" "https://d3kle7qwymxpcy.cloudfront.net/images/broadcasts/e5/8e/30457/1/c300.png"
+dist/grammy.tmp/news.google.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/news.google.com.png" "https://upload.wikimedia.org/wikipedia/commons/0/0b/Google_News_icon.png"
+dist/grammy.tmp/newscentermaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/newscentermaine.com.png" "https://web.archive.org/web/20200721190548if_/https://www.newscentermaine.com/assets/favicons/WCSH.png?ver=2.4.7.4"
+dist/grammy.tmp/pressherald.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/pressherald.com.png" "https://multifiles.pressherald.com/uploads/sites/4/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/weather.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/weather.com.png" "https://upload.wikimedia.org/wikipedia/commons/thumb/7/77/The_Weather_Channel_logo_2005-present.svg/1200px-The_Weather_Channel_logo_2005-present.svg.png"
+
+dist/ifpublic:
+	cp ifpublic/ifpublic dist/
+
+dist/pschdir:
+	$(MAKE) -C pschdir
+	cp pschdir/pschdir dist/pschdir
+
+dist/spacer.bin:
+	# creates an 8GB empty file
+	# that way when the alarm bells go off you can delete it to save a
+	# couple minutes before the system really runs out of disk
+	#
+	#     512     * 16777216 = 8GB
+	dd bs=512 count=16777216 </dev/zero >dist/spacer.bin
+
+dist/str:
+	$(MAKE) -C str
+	cp str/str dist/
+
+dist/streq:
+	$(MAKE) -C streq
+	cp streq/streq dist/
+
+$(HOME)/.fonts/unscii-16-full.ttf:
+	mkdir -p $(HOME)/.fonts/
+	curl -o $(HOME)/.fonts/unscii-16-full.ttf.tmp http://viznut.fi/unscii/unscii-16-full.ttf
+	mv $(HOME)/.fonts/unscii-16-full.ttf.tmp $(HOME)/.fonts/unscii-16-full.ttf
+
+# I never finished this because I realized it needed OpenJDK. Fuck Java.
+# depends on
+#	apk:chimerautils (on Chimera Linux)
+#	apk:curl
+$(PREFIX)/src/arduino18:
+	# the person that made the tarball used the absolute file location in
+	# the sha512 file, so it looks like
+	# [sum]  /home/user/dir/tarball.tar.xz
+	# so filter out the file locations before diffing
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz.sha512 \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512
+	sha512sum arduino-1.8.19.tar.xz \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512.local
+	# if the sums differ the makefile will terminate
+	cat arduino-1.8.19.tar.xz.sha512 $(PREFIX)/src/arduino-1.8.19.tar.xz.sha512.local \
+		| uniq \
+		| wc -l \
+		| xargs echo \
+		| xargs test 1 =
+	xz -cd "$(PREFIX)"/src/arduino-1.8.19.tar.xz \
+		| tar -C "$(PREFIX)" x
+	mv "$(PREFIX)"/arduino-1.8.19 "$(PREFIX)"/arduino18
+
+$(PREFIX)/bin/bar:
+	git clone https://github.com/LemonBoy/bar.git "$(PREFIX)"/src/bar
+	$(MAKE) -C "$(PREFIX)"/src/bar PREFIX="$(PREFIX)" install
+
+# depends on
+# 	apk:clang
+# 	apk:git
+#	apk:gmake
+#	apk:libx11-devel
+#	apk:libxau-devel
+#	apk:libxcb-devel
+#	apk:libxinerama-devel
+#	apk:xcb-util-devel
+#	apk:xcb-util-keysyms-devel
+#	apk:xcb-util-wm-devel
+$(PREFIX)/bin/bspwm:
+	git clone https://github.com/baskerville/bspwm.git "$(PREFIX)"/src/bspwm
+	$(MAKE) -C "$(PREFIX)"/src/bspwm install
+
+# depends on:
+#	apk:git (build)
+#	apk:ncurses-devel (optional if curses.h is present on system)
+$(PREFIX)/bin/cmatrix:
+	git clone https://github.com/abishekvashok/cmatrix.git $(PREFIX)/src/cmatrix
+	sh -c 'cd "$(PREFIX)"/src/cmatrix; autoreconf -i && ./configure --prefix="$(PREFIX)"'
+	$(MAKE) -C "$(PREFIX)"/src/cmatrix install
+
+# game.tar should extract to
+# 'The Coffin of Andy and Leyley'/
+#	Game.exe
+#	[files on which Game.exe depends]
+# I originally got it as a RAR which I decompressed and packed into a TAR.
+# _CommonRedist/
+#	dotNetFx40_Full_setup.exe
+#	dxwebsetup.exe
+#	oalinst.exe
+#	vcredist_2015-2019_x64.exe
+#	vcredist_2015-2019_x86.exe
+#	vcredist_x64.exe
+#	vcredist_x86.exe
+#	xnafx40_redist.msi
+# depends on
+#	apk:curl
+#	apk:git
+#	apk:qemu-system-arm
+#	apk:xz
+$(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img:
+	mkdir -p "$(PREFIX)"/bin/coffin_files
+	curl http://downloads.raspberrypi.org/raspios_full_armhf/images/raspios_full_armhf-2021-11-08/2021-10-30-raspios-bullseye-armhf-full.zip -o "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+	tar -C "$(PREFIX)"/bin/coffin_files xf "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+#$(PREFIX)/bin/coffin: $(PREFIX)/bin/coffin_files/game.tar $(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img $(PREFIX)/src/qemu-rpi-kernel
+
+# Installs the Python script without documentation because I'm lazy and don't
+# wanna run the upstream Makefile and then deal with filtering out the Python
+# stuff (which is specific to 3.6 which is a little outdated).
+# depends on apk:git apk:python
+$(PREFIX)/bin/git-filter-repo:
+	git clone https://github.com/newren/git-filter-repo.git $(PREFIX)/src/git-filter-repo
+	$(INSTALL) -Dm0755 $(PREFIX)/src/git-filter-repo/git-filter-repo $(PREFIX)/bin/git-filter-repo
+
+# depends on
+#	apk:git
+#	apk:texinfo
+$(PREFIX)/bin/macchanger:
+	git clone https://github.com/alobbs/macchanger.git "$(PREFIX)"/src/macchanger
+	sh -c 'cd "$(PREFIX)"/src/macchanger; ./autogen.sh --prefix=/usr/local/'
+	# https://github.com/alobbs/macchanger/issues/14
+	sed -i .orig -e 's/caddr_t/void */' "$(PREFIX)"/src/macchanger/src/netinfo.c
+	$(MAKE) -C "$(PREFIX)"/src/macchanger install
+
+# nmap 7.80 is the last Free nmap release
+# depends on apk:linux-headers
+# had to # ln -s /bin/gmake /usr/local/bin/make
+# with clang 16.0.6 aarch75-chimera-linux-musl, cannot compile (4 errors?)
+$(PREFIX)/bin/nmap:
+	curl "https://nmap.org/dist/nmap-7.80.tar.bz2" | bzip2 -cd | tar x -C /usr/local/src/
+	cd /usr/local/src/nmap-7.80; ./configure --prefix=/usr/local
+	$(MAKE) -C /usr/local/src/nmap-7.80
+
+# depends on
+#	apk:git
+$(PREFIX)/bin/pandoc: $(PREFIX)/bin/cabal
+	git clone https://github.com/jgm/pandoc.git "$(PREFIX)"/src/pandoc.tmp
+	mv "$(PREFIX)"/pandoc.tmp "$(PREFIX)"/pandoc
+
+# depends on
+# 	apk:bison
+# 	apk:cairo-devel
+# 	apk:flex
+# 	apk:gdk-pixbuf-devel
+# 	apk:glib-devel
+# 	apk:libxkbcommon-devel
+# 	apk:pango-devel
+# 	apk:pkgconf
+# 	apk:meson
+# 	apk:startup-notification-devel
+# 	apk:xcb-util-cursor-devel
+$(PREFIX)/bin/rofi:
+	git clone https://davatorium/rofi.git $(PREFIX)/src/rofi
+	sh -c 'cd $(PREFIX)/src/rofi; meson setup build'
+	ninja -C $(PREFIX)/src/rofi/build install
+
+# depends on
+# 	apk:autoconf
+# 	apk:autoconf-archive
+# 	apk:imlib2-devel
+# 	apk:libxcomposite-devel
+# 	apk:libxfixes-devel
+$(PREFIX)/bin/scrot:
+	git clone https://github.com/resurrecting-open-source-projects/scrot.git "$(PREFIX)"/src/scrot
+	sh -c 'cd $(PREFIX)/src/scrot && ./autogen.sh && ./configure MAKE=$(MAKE) PREFIX=$(PREFIX)'
+	$(MAKE) -C $(PREFIX)/src/scrot install
+
+# depends on
+#	apk:g++
+$(PREFIX)/bin/unrar:
+	git clone https://github.com/pmachapman/unrar.git "$(PREFIX)"/src/unrar
+	$(MAKE) -C "$(PREFIX)"/src/unrar
+	$(INSTALL) -Dm0755 "$(PREFIX)"/src/unrar/unrar "$(PREFIX)"/bin/unrar
+
+# I tried final_official_2.50 but it wouldn't build
+# (ld: error: duplicate symbol: comDat)
+# depends on
+#	apk:sudo
+$(PREFIX)/src/wiringpi:
+	git clone https://github.com/WiringPi/WiringPi.git $(PREFIX)/src/wiringpi
+	git -C $(PREFIX)/src/wiringpi checkout 2.61-1
+	sed -i .old -e /^sudo/d $(PREFIX)/src/wiringpi/build
+	sed -i .old -e s/root\.root/root\:root/ $(PREFIX)/src/wiringpi/gpio
+	sh -c 'cd $(PREFIX)/src/wiringpi; sudo=sudo ./build'
+
+$(PREFIX)/bin/xdo:
+	git clone https://github.com/baskerville/xdo.git $(PREFIX)/src/xdo
+	$(MAKE) -C $(PREFIX)/src/xdo install
+
+$(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz:
+	mkdir -p $(PREFIX)/share/audacious/Skins
+	curl https://archive.org/download/winampskin_Sailor_Moon_Gang/Sailor_Moon_Gang.wsz -o $(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz
+
+# depends on
+#	apk:git
+$(PREFIX)/src/qemu-rpi-kernel:
+	git clone https://github.com/dhruvvyas90/qemu-rpi-kernel "$(PREFIX)"/src/qemu-rpi-kernel
+
+# depends on
+#	apk:git
+$(PREFIX)/src/moreutils:
+	git clone git://git.joeyh.name/moreutils "$(PREFIX)"/src/moreutils.tmp
+	mv "$(PREFIX)"/src/moreutils.tmp "$(PREFIX)"/src/moreutils
+
+# depends on
+#	apk:git
+$(PREFIX)/src/syslinux:
+	git clone --recursive https://repo.or.cz/syslinux.git "$(PREFIX)"/src/syslinux
+
+.PHONY: android-udev-rules
+android-udev-rules:
+	git clone https://github.com/M0Rf30/android-udev-rules.git "$(PREFIX)"/src/android-udev-rules
+	# rather than requiring user to be in `adbusers`, just use group wheel
+	sed -i .orig -e s/adbusers/wheel/g "$(PREFIX)"/src/android-udev-rules/51-android.rules
+	mkdir -p /etc/udev/rules.d
+	cp "$(PREFIX)"/src/android-udev-rules/51-android.rules /etc/udev/rules.d/51-android.rules
+	chmod a+r /etc/udev/rules.d/51-android.rules
+	udevadm control --reload-rules
+	# assumes dinit
+	dinitctl restart udevd
+
+
+.PHONY: unscii-pkgsrc
+unscii-pkgsrc:
+	$(MAKE) -C /usr/pkgsrc/fonts/unscii install clean clean-depends

soft/wip/moreutils

@@ -0,0 +1,6 @@
+#!/bin/sh
+
+NAME=moreutils
+VERSION=nightly
+UPSTREAM=git://git.joeyh.name/moreutils
+. soft

soft/wip/netbsd-rogue

@@ -0,0 +1,15 @@
+#!/bin/sh
+
+NAME=netbsd-rogue
+VERSION=nightly
+UPSTREAM=https://github.com/NetBSD/src.git
+UPSTREAM_TYPE=custom
+. soft
+
+# fetch
+git clone --filter=blob:none --no-checkout --depth 1 "$UPSTREAM" "$SRC"
+git -C "$SRC" sparse-checkout set --sparse-index games/rogue include/machine sys
+git -C "$SRC" checkout trunk
+
+# mangle
+

soft/wip/nethack

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+NAME=nethack
+VERSION=nightly
+UPSTREAM=https://github.com/NetHack/NetHack.git
+. soft
+
+sh -c 'cd "$SRC"/sys/unix; sh setup.sh'
+$MAKE -C "$SRC" fetch-lua
+# the following doesn't work for me
+$MAKE -C "$SRC"

soft/wip/pandoc

@@ -0,0 +1,293 @@
+# System utilities
+CC = cc
+CFLAGS = -Iinclude/ -Ilib/ -g -Wall -Wextra -Wpedantic
+HOME = /home/trinity
+PREFIX = /usr/local
+RM = rm -f
+
+all:
+
+HOMEPAGE_FILES = homepage propaganda/*
+dist/homepage:
+	mkdir -p dist/homepage.tmp
+	cp $(HOMEPAGE_FILES) dist/homepage.tmp
+	cd dist/homepage.tmp; sh homepage; cd ../..
+	$(RM) dist/homepage.tmp/homepage dist/homepage.tmp/homepage.local
+	mv dist/homepage.tmp dist/homepage
+dist/homepage.tar.gz: dist/homepage
+	tar cz -C dist/homepage . >dist/homepage.tar.gz
+
+# i made this script to fetch icons for my grandmother and put them in icons/
+# so i wouldn't have to fetch the icons for her desktop when i made her a new
+# system.
+# i could have downloaded all the icons and put them into a repo for her but
+# this uses less space
+dist/grammy:	dist/grammy.tmp/989wclz.com.png \
+		dist/grammy.tmp/amazon.com.ico \
+		dist/grammy.tmp/bangordailynews.com.png \
+		dist/grammy.tmp/theguardian.com.png \
+		dist/grammy.tmp/centralmaine.com.png \
+		dist/grammy.tmp/dictionary.com.png \
+		dist/grammy.tmp/google.com.jpg \
+		dist/grammy.tmp/longfellowsgreenhouses.com.jpg \
+		dist/grammy.tmp/mainepublic.org.png \
+		dist/grammy.tmp/news.google.com.png \
+		dist/grammy.tmp/newscentermaine.com.png \
+		dist/grammy.tmp/pressherald.com.png \
+		dist/grammy.tmp/weather.com.png
+	mv dist/grammy.tmp dist/grammy
+dist/grammy.tmp:
+	mkdir -p dist/grammy.tmp
+dist/grammy.tmp/989wclz.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/989wclz.com.png" "https://web.archive.org/web/20200629174002if_/https://989wclz.com/wp-content/themes/wclz/img/touch-icon-144.png"
+dist/grammy.tmp/amazon.com.ico: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/amazon.com.ico" "https://web.archive.org/web/20200718050400if_/https://www.amazon.com/favicon.ico"
+dist/grammy.tmp/bangordailynews.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/bangordailynews.com.png" "http://web.archive.org/web/20200721195123if_/https://i0.wp.com/bdn-data.s3.amazonaws.com/uploads/2020/06/BDN-logo_green-3-1.png"
+dist/grammy.tmp/theguardian.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/theguardian.com.png" "https://web.archive.org/web/20200720041457if_/https://assets.guim.co.uk/images/favicons/fee5e2d638d1c35f6d501fa397e53329/152x152.png"
+dist/grammy.tmp/centralmaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/centralmaine.com.png" "https://web.archive.org/web/20200720023956if_/https://multifiles.pressherald.com/uploads/sites/2/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/dictionary.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/dictionary.com.png" "https://web.archive.org/web/20200719135458if_/https://www.dictionary.com/hp-assets/dcom_favicon-1bff2f1b49c077ed504e55c3649f2a4b.png"
+dist/grammy.tmp/google.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/google.com.jpg" "https://web.archive.org/web/20170621105937if_/https://yt3.ggpht.com/-v0soe-ievYE/AAAAAAAAAAI/AAAAAAAAAAA/OixOH_h84Po/s900-c-k-no/photo.jpg"
+dist/grammy.tmp/longfellowsgreenhouses.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/longfellowsgreenhouses.com.jpg" "https://web.archive.org/web/20200718173559im_/https://longfellowsgreenhouses.com/wp-content/uploads/2020/03/Longfellows-Logo-Light-Green.jpg"
+dist/grammy.tmp/mainepublic.org.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/mainepublic.org.png" "https://d3kle7qwymxpcy.cloudfront.net/images/broadcasts/e5/8e/30457/1/c300.png"
+dist/grammy.tmp/news.google.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/news.google.com.png" "https://upload.wikimedia.org/wikipedia/commons/0/0b/Google_News_icon.png"
+dist/grammy.tmp/newscentermaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/newscentermaine.com.png" "https://web.archive.org/web/20200721190548if_/https://www.newscentermaine.com/assets/favicons/WCSH.png?ver=2.4.7.4"
+dist/grammy.tmp/pressherald.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/pressherald.com.png" "https://multifiles.pressherald.com/uploads/sites/4/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/weather.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/weather.com.png" "https://upload.wikimedia.org/wikipedia/commons/thumb/7/77/The_Weather_Channel_logo_2005-present.svg/1200px-The_Weather_Channel_logo_2005-present.svg.png"
+
+dist/ifpublic:
+	cp ifpublic/ifpublic dist/
+
+dist/pschdir:
+	$(MAKE) -C pschdir
+	cp pschdir/pschdir dist/pschdir
+
+dist/spacer.bin:
+	# creates an 8GB empty file
+	# that way when the alarm bells go off you can delete it to save a
+	# couple minutes before the system really runs out of disk
+	#
+	#     512     * 16777216 = 8GB
+	dd bs=512 count=16777216 </dev/zero >dist/spacer.bin
+
+dist/str:
+	$(MAKE) -C str
+	cp str/str dist/
+
+dist/streq:
+	$(MAKE) -C streq
+	cp streq/streq dist/
+
+$(HOME)/.fonts/unscii-16-full.ttf:
+	mkdir -p $(HOME)/.fonts/
+	curl -o $(HOME)/.fonts/unscii-16-full.ttf.tmp http://viznut.fi/unscii/unscii-16-full.ttf
+	mv $(HOME)/.fonts/unscii-16-full.ttf.tmp $(HOME)/.fonts/unscii-16-full.ttf
+
+# I never finished this because I realized it needed OpenJDK. Fuck Java.
+# depends on
+#	apk:chimerautils (on Chimera Linux)
+#	apk:curl
+$(PREFIX)/src/arduino18:
+	# the person that made the tarball used the absolute file location in
+	# the sha512 file, so it looks like
+	# [sum]  /home/user/dir/tarball.tar.xz
+	# so filter out the file locations before diffing
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz.sha512 \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512
+	sha512sum arduino-1.8.19.tar.xz \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512.local
+	# if the sums differ the makefile will terminate
+	cat arduino-1.8.19.tar.xz.sha512 $(PREFIX)/src/arduino-1.8.19.tar.xz.sha512.local \
+		| uniq \
+		| wc -l \
+		| xargs echo \
+		| xargs test 1 =
+	xz -cd "$(PREFIX)"/src/arduino-1.8.19.tar.xz \
+		| tar -C "$(PREFIX)" x
+	mv "$(PREFIX)"/arduino-1.8.19 "$(PREFIX)"/arduino18
+
+$(PREFIX)/bin/bar:
+	git clone https://github.com/LemonBoy/bar.git "$(PREFIX)"/src/bar
+	$(MAKE) -C "$(PREFIX)"/src/bar PREFIX="$(PREFIX)" install
+
+# depends on
+# 	apk:clang
+# 	apk:git
+#	apk:gmake
+#	apk:libx11-devel
+#	apk:libxau-devel
+#	apk:libxcb-devel
+#	apk:libxinerama-devel
+#	apk:xcb-util-devel
+#	apk:xcb-util-keysyms-devel
+#	apk:xcb-util-wm-devel
+$(PREFIX)/bin/bspwm:
+	git clone https://github.com/baskerville/bspwm.git "$(PREFIX)"/src/bspwm
+	$(MAKE) -C "$(PREFIX)"/src/bspwm install
+
+# depends on:
+#	apk:git (build)
+#	apk:ncurses-devel (optional if curses.h is present on system)
+$(PREFIX)/bin/cmatrix:
+	git clone https://github.com/abishekvashok/cmatrix.git $(PREFIX)/src/cmatrix
+	sh -c 'cd "$(PREFIX)"/src/cmatrix; autoreconf -i && ./configure --prefix="$(PREFIX)"'
+	$(MAKE) -C "$(PREFIX)"/src/cmatrix install
+
+# game.tar should extract to
+# 'The Coffin of Andy and Leyley'/
+#	Game.exe
+#	[files on which Game.exe depends]
+# I originally got it as a RAR which I decompressed and packed into a TAR.
+# _CommonRedist/
+#	dotNetFx40_Full_setup.exe
+#	dxwebsetup.exe
+#	oalinst.exe
+#	vcredist_2015-2019_x64.exe
+#	vcredist_2015-2019_x86.exe
+#	vcredist_x64.exe
+#	vcredist_x86.exe
+#	xnafx40_redist.msi
+# depends on
+#	apk:curl
+#	apk:git
+#	apk:qemu-system-arm
+#	apk:xz
+$(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img:
+	mkdir -p "$(PREFIX)"/bin/coffin_files
+	curl http://downloads.raspberrypi.org/raspios_full_armhf/images/raspios_full_armhf-2021-11-08/2021-10-30-raspios-bullseye-armhf-full.zip -o "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+	tar -C "$(PREFIX)"/bin/coffin_files xf "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+#$(PREFIX)/bin/coffin: $(PREFIX)/bin/coffin_files/game.tar $(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img $(PREFIX)/src/qemu-rpi-kernel
+
+# Installs the Python script without documentation because I'm lazy and don't
+# wanna run the upstream Makefile and then deal with filtering out the Python
+# stuff (which is specific to 3.6 which is a little outdated).
+# depends on apk:git apk:python
+$(PREFIX)/bin/git-filter-repo:
+	git clone https://github.com/newren/git-filter-repo.git $(PREFIX)/src/git-filter-repo
+	$(INSTALL) -Dm0755 $(PREFIX)/src/git-filter-repo/git-filter-repo $(PREFIX)/bin/git-filter-repo
+
+# depends on
+#	apk:git
+#	apk:texinfo
+$(PREFIX)/bin/macchanger:
+	git clone https://github.com/alobbs/macchanger.git "$(PREFIX)"/src/macchanger
+	sh -c 'cd "$(PREFIX)"/src/macchanger; ./autogen.sh --prefix=/usr/local/'
+	# https://github.com/alobbs/macchanger/issues/14
+	sed -i .orig -e 's/caddr_t/void */' "$(PREFIX)"/src/macchanger/src/netinfo.c
+	$(MAKE) -C "$(PREFIX)"/src/macchanger install
+
+# nmap 7.80 is the last Free nmap release
+# depends on apk:linux-headers
+# had to # ln -s /bin/gmake /usr/local/bin/make
+# with clang 16.0.6 aarch75-chimera-linux-musl, cannot compile (4 errors?)
+$(PREFIX)/bin/nmap:
+	curl "https://nmap.org/dist/nmap-7.80.tar.bz2" | bzip2 -cd | tar x -C /usr/local/src/
+	cd /usr/local/src/nmap-7.80; ./configure --prefix=/usr/local
+	$(MAKE) -C /usr/local/src/nmap-7.80
+
+# depends on
+#	apk:git
+$(PREFIX)/bin/pandoc: $(PREFIX)/bin/cabal
+	git clone https://github.com/jgm/pandoc.git "$(PREFIX)"/src/pandoc.tmp
+	mv "$(PREFIX)"/pandoc.tmp "$(PREFIX)"/pandoc
+
+# depends on
+# 	apk:bison
+# 	apk:cairo-devel
+# 	apk:flex
+# 	apk:gdk-pixbuf-devel
+# 	apk:glib-devel
+# 	apk:libxkbcommon-devel
+# 	apk:pango-devel
+# 	apk:pkgconf
+# 	apk:meson
+# 	apk:startup-notification-devel
+# 	apk:xcb-util-cursor-devel
+$(PREFIX)/bin/rofi:
+	git clone https://davatorium/rofi.git $(PREFIX)/src/rofi
+	sh -c 'cd $(PREFIX)/src/rofi; meson setup build'
+	ninja -C $(PREFIX)/src/rofi/build install
+
+# depends on
+# 	apk:autoconf
+# 	apk:autoconf-archive
+# 	apk:imlib2-devel
+# 	apk:libxcomposite-devel
+# 	apk:libxfixes-devel
+$(PREFIX)/bin/scrot:
+	git clone https://github.com/resurrecting-open-source-projects/scrot.git "$(PREFIX)"/src/scrot
+	sh -c 'cd $(PREFIX)/src/scrot && ./autogen.sh && ./configure MAKE=$(MAKE) PREFIX=$(PREFIX)'
+	$(MAKE) -C $(PREFIX)/src/scrot install
+
+# depends on
+#	apk:g++
+$(PREFIX)/bin/unrar:
+	git clone https://github.com/pmachapman/unrar.git "$(PREFIX)"/src/unrar
+	$(MAKE) -C "$(PREFIX)"/src/unrar
+	$(INSTALL) -Dm0755 "$(PREFIX)"/src/unrar/unrar "$(PREFIX)"/bin/unrar
+
+# I tried final_official_2.50 but it wouldn't build
+# (ld: error: duplicate symbol: comDat)
+# depends on
+#	apk:sudo
+$(PREFIX)/src/wiringpi:
+	git clone https://github.com/WiringPi/WiringPi.git $(PREFIX)/src/wiringpi
+	git -C $(PREFIX)/src/wiringpi checkout 2.61-1
+	sed -i .old -e /^sudo/d $(PREFIX)/src/wiringpi/build
+	sed -i .old -e s/root\.root/root\:root/ $(PREFIX)/src/wiringpi/gpio
+	sh -c 'cd $(PREFIX)/src/wiringpi; sudo=sudo ./build'
+
+$(PREFIX)/bin/xdo:
+	git clone https://github.com/baskerville/xdo.git $(PREFIX)/src/xdo
+	$(MAKE) -C $(PREFIX)/src/xdo install
+
+$(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz:
+	mkdir -p $(PREFIX)/share/audacious/Skins
+	curl https://archive.org/download/winampskin_Sailor_Moon_Gang/Sailor_Moon_Gang.wsz -o $(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz
+
+# depends on
+#	apk:git
+$(PREFIX)/src/qemu-rpi-kernel:
+	git clone https://github.com/dhruvvyas90/qemu-rpi-kernel "$(PREFIX)"/src/qemu-rpi-kernel
+
+# depends on
+#	apk:git
+$(PREFIX)/src/moreutils:
+	git clone git://git.joeyh.name/moreutils "$(PREFIX)"/src/moreutils.tmp
+	mv "$(PREFIX)"/src/moreutils.tmp "$(PREFIX)"/src/moreutils
+
+# depends on
+#	apk:git
+$(PREFIX)/src/syslinux:
+	git clone --recursive https://repo.or.cz/syslinux.git "$(PREFIX)"/src/syslinux
+
+.PHONY: android-udev-rules
+android-udev-rules:
+	git clone https://github.com/M0Rf30/android-udev-rules.git "$(PREFIX)"/src/android-udev-rules
+	# rather than requiring user to be in `adbusers`, just use group wheel
+	sed -i .orig -e s/adbusers/wheel/g "$(PREFIX)"/src/android-udev-rules/51-android.rules
+	mkdir -p /etc/udev/rules.d
+	cp "$(PREFIX)"/src/android-udev-rules/51-android.rules /etc/udev/rules.d/51-android.rules
+	chmod a+r /etc/udev/rules.d/51-android.rules
+	udevadm control --reload-rules
+	# assumes dinit
+	dinitctl restart udevd
+
+
+.PHONY: unscii-pkgsrc
+unscii-pkgsrc:
+	$(MAKE) -C /usr/pkgsrc/fonts/unscii install clean clean-depends

soft/wip/qemu-rpi-kernel

@@ -0,0 +1,293 @@
+# System utilities
+CC = cc
+CFLAGS = -Iinclude/ -Ilib/ -g -Wall -Wextra -Wpedantic
+HOME = /home/trinity
+PREFIX = /usr/local
+RM = rm -f
+
+all:
+
+HOMEPAGE_FILES = homepage propaganda/*
+dist/homepage:
+	mkdir -p dist/homepage.tmp
+	cp $(HOMEPAGE_FILES) dist/homepage.tmp
+	cd dist/homepage.tmp; sh homepage; cd ../..
+	$(RM) dist/homepage.tmp/homepage dist/homepage.tmp/homepage.local
+	mv dist/homepage.tmp dist/homepage
+dist/homepage.tar.gz: dist/homepage
+	tar cz -C dist/homepage . >dist/homepage.tar.gz
+
+# i made this script to fetch icons for my grandmother and put them in icons/
+# so i wouldn't have to fetch the icons for her desktop when i made her a new
+# system.
+# i could have downloaded all the icons and put them into a repo for her but
+# this uses less space
+dist/grammy:	dist/grammy.tmp/989wclz.com.png \
+		dist/grammy.tmp/amazon.com.ico \
+		dist/grammy.tmp/bangordailynews.com.png \
+		dist/grammy.tmp/theguardian.com.png \
+		dist/grammy.tmp/centralmaine.com.png \
+		dist/grammy.tmp/dictionary.com.png \
+		dist/grammy.tmp/google.com.jpg \
+		dist/grammy.tmp/longfellowsgreenhouses.com.jpg \
+		dist/grammy.tmp/mainepublic.org.png \
+		dist/grammy.tmp/news.google.com.png \
+		dist/grammy.tmp/newscentermaine.com.png \
+		dist/grammy.tmp/pressherald.com.png \
+		dist/grammy.tmp/weather.com.png
+	mv dist/grammy.tmp dist/grammy
+dist/grammy.tmp:
+	mkdir -p dist/grammy.tmp
+dist/grammy.tmp/989wclz.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/989wclz.com.png" "https://web.archive.org/web/20200629174002if_/https://989wclz.com/wp-content/themes/wclz/img/touch-icon-144.png"
+dist/grammy.tmp/amazon.com.ico: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/amazon.com.ico" "https://web.archive.org/web/20200718050400if_/https://www.amazon.com/favicon.ico"
+dist/grammy.tmp/bangordailynews.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/bangordailynews.com.png" "http://web.archive.org/web/20200721195123if_/https://i0.wp.com/bdn-data.s3.amazonaws.com/uploads/2020/06/BDN-logo_green-3-1.png"
+dist/grammy.tmp/theguardian.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/theguardian.com.png" "https://web.archive.org/web/20200720041457if_/https://assets.guim.co.uk/images/favicons/fee5e2d638d1c35f6d501fa397e53329/152x152.png"
+dist/grammy.tmp/centralmaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/centralmaine.com.png" "https://web.archive.org/web/20200720023956if_/https://multifiles.pressherald.com/uploads/sites/2/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/dictionary.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/dictionary.com.png" "https://web.archive.org/web/20200719135458if_/https://www.dictionary.com/hp-assets/dcom_favicon-1bff2f1b49c077ed504e55c3649f2a4b.png"
+dist/grammy.tmp/google.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/google.com.jpg" "https://web.archive.org/web/20170621105937if_/https://yt3.ggpht.com/-v0soe-ievYE/AAAAAAAAAAI/AAAAAAAAAAA/OixOH_h84Po/s900-c-k-no/photo.jpg"
+dist/grammy.tmp/longfellowsgreenhouses.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/longfellowsgreenhouses.com.jpg" "https://web.archive.org/web/20200718173559im_/https://longfellowsgreenhouses.com/wp-content/uploads/2020/03/Longfellows-Logo-Light-Green.jpg"
+dist/grammy.tmp/mainepublic.org.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/mainepublic.org.png" "https://d3kle7qwymxpcy.cloudfront.net/images/broadcasts/e5/8e/30457/1/c300.png"
+dist/grammy.tmp/news.google.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/news.google.com.png" "https://upload.wikimedia.org/wikipedia/commons/0/0b/Google_News_icon.png"
+dist/grammy.tmp/newscentermaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/newscentermaine.com.png" "https://web.archive.org/web/20200721190548if_/https://www.newscentermaine.com/assets/favicons/WCSH.png?ver=2.4.7.4"
+dist/grammy.tmp/pressherald.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/pressherald.com.png" "https://multifiles.pressherald.com/uploads/sites/4/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/weather.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/weather.com.png" "https://upload.wikimedia.org/wikipedia/commons/thumb/7/77/The_Weather_Channel_logo_2005-present.svg/1200px-The_Weather_Channel_logo_2005-present.svg.png"
+
+dist/ifpublic:
+	cp ifpublic/ifpublic dist/
+
+dist/pschdir:
+	$(MAKE) -C pschdir
+	cp pschdir/pschdir dist/pschdir
+
+dist/spacer.bin:
+	# creates an 8GB empty file
+	# that way when the alarm bells go off you can delete it to save a
+	# couple minutes before the system really runs out of disk
+	#
+	#     512     * 16777216 = 8GB
+	dd bs=512 count=16777216 </dev/zero >dist/spacer.bin
+
+dist/str:
+	$(MAKE) -C str
+	cp str/str dist/
+
+dist/streq:
+	$(MAKE) -C streq
+	cp streq/streq dist/
+
+$(HOME)/.fonts/unscii-16-full.ttf:
+	mkdir -p $(HOME)/.fonts/
+	curl -o $(HOME)/.fonts/unscii-16-full.ttf.tmp http://viznut.fi/unscii/unscii-16-full.ttf
+	mv $(HOME)/.fonts/unscii-16-full.ttf.tmp $(HOME)/.fonts/unscii-16-full.ttf
+
+# I never finished this because I realized it needed OpenJDK. Fuck Java.
+# depends on
+#	apk:chimerautils (on Chimera Linux)
+#	apk:curl
+$(PREFIX)/src/arduino18:
+	# the person that made the tarball used the absolute file location in
+	# the sha512 file, so it looks like
+	# [sum]  /home/user/dir/tarball.tar.xz
+	# so filter out the file locations before diffing
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz.sha512 \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512
+	sha512sum arduino-1.8.19.tar.xz \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512.local
+	# if the sums differ the makefile will terminate
+	cat arduino-1.8.19.tar.xz.sha512 $(PREFIX)/src/arduino-1.8.19.tar.xz.sha512.local \
+		| uniq \
+		| wc -l \
+		| xargs echo \
+		| xargs test 1 =
+	xz -cd "$(PREFIX)"/src/arduino-1.8.19.tar.xz \
+		| tar -C "$(PREFIX)" x
+	mv "$(PREFIX)"/arduino-1.8.19 "$(PREFIX)"/arduino18
+
+$(PREFIX)/bin/bar:
+	git clone https://github.com/LemonBoy/bar.git "$(PREFIX)"/src/bar
+	$(MAKE) -C "$(PREFIX)"/src/bar PREFIX="$(PREFIX)" install
+
+# depends on
+# 	apk:clang
+# 	apk:git
+#	apk:gmake
+#	apk:libx11-devel
+#	apk:libxau-devel
+#	apk:libxcb-devel
+#	apk:libxinerama-devel
+#	apk:xcb-util-devel
+#	apk:xcb-util-keysyms-devel
+#	apk:xcb-util-wm-devel
+$(PREFIX)/bin/bspwm:
+	git clone https://github.com/baskerville/bspwm.git "$(PREFIX)"/src/bspwm
+	$(MAKE) -C "$(PREFIX)"/src/bspwm install
+
+# depends on:
+#	apk:git (build)
+#	apk:ncurses-devel (optional if curses.h is present on system)
+$(PREFIX)/bin/cmatrix:
+	git clone https://github.com/abishekvashok/cmatrix.git $(PREFIX)/src/cmatrix
+	sh -c 'cd "$(PREFIX)"/src/cmatrix; autoreconf -i && ./configure --prefix="$(PREFIX)"'
+	$(MAKE) -C "$(PREFIX)"/src/cmatrix install
+
+# game.tar should extract to
+# 'The Coffin of Andy and Leyley'/
+#	Game.exe
+#	[files on which Game.exe depends]
+# I originally got it as a RAR which I decompressed and packed into a TAR.
+# _CommonRedist/
+#	dotNetFx40_Full_setup.exe
+#	dxwebsetup.exe
+#	oalinst.exe
+#	vcredist_2015-2019_x64.exe
+#	vcredist_2015-2019_x86.exe
+#	vcredist_x64.exe
+#	vcredist_x86.exe
+#	xnafx40_redist.msi
+# depends on
+#	apk:curl
+#	apk:git
+#	apk:qemu-system-arm
+#	apk:xz
+$(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img:
+	mkdir -p "$(PREFIX)"/bin/coffin_files
+	curl http://downloads.raspberrypi.org/raspios_full_armhf/images/raspios_full_armhf-2021-11-08/2021-10-30-raspios-bullseye-armhf-full.zip -o "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+	tar -C "$(PREFIX)"/bin/coffin_files xf "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+#$(PREFIX)/bin/coffin: $(PREFIX)/bin/coffin_files/game.tar $(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img $(PREFIX)/src/qemu-rpi-kernel
+
+# Installs the Python script without documentation because I'm lazy and don't
+# wanna run the upstream Makefile and then deal with filtering out the Python
+# stuff (which is specific to 3.6 which is a little outdated).
+# depends on apk:git apk:python
+$(PREFIX)/bin/git-filter-repo:
+	git clone https://github.com/newren/git-filter-repo.git $(PREFIX)/src/git-filter-repo
+	$(INSTALL) -Dm0755 $(PREFIX)/src/git-filter-repo/git-filter-repo $(PREFIX)/bin/git-filter-repo
+
+# depends on
+#	apk:git
+#	apk:texinfo
+$(PREFIX)/bin/macchanger:
+	git clone https://github.com/alobbs/macchanger.git "$(PREFIX)"/src/macchanger
+	sh -c 'cd "$(PREFIX)"/src/macchanger; ./autogen.sh --prefix=/usr/local/'
+	# https://github.com/alobbs/macchanger/issues/14
+	sed -i .orig -e 's/caddr_t/void */' "$(PREFIX)"/src/macchanger/src/netinfo.c
+	$(MAKE) -C "$(PREFIX)"/src/macchanger install
+
+# nmap 7.80 is the last Free nmap release
+# depends on apk:linux-headers
+# had to # ln -s /bin/gmake /usr/local/bin/make
+# with clang 16.0.6 aarch75-chimera-linux-musl, cannot compile (4 errors?)
+$(PREFIX)/bin/nmap:
+	curl "https://nmap.org/dist/nmap-7.80.tar.bz2" | bzip2 -cd | tar x -C /usr/local/src/
+	cd /usr/local/src/nmap-7.80; ./configure --prefix=/usr/local
+	$(MAKE) -C /usr/local/src/nmap-7.80
+
+# depends on
+#	apk:git
+$(PREFIX)/bin/pandoc: $(PREFIX)/bin/cabal
+	git clone https://github.com/jgm/pandoc.git "$(PREFIX)"/src/pandoc.tmp
+	mv "$(PREFIX)"/pandoc.tmp "$(PREFIX)"/pandoc
+
+# depends on
+# 	apk:bison
+# 	apk:cairo-devel
+# 	apk:flex
+# 	apk:gdk-pixbuf-devel
+# 	apk:glib-devel
+# 	apk:libxkbcommon-devel
+# 	apk:pango-devel
+# 	apk:pkgconf
+# 	apk:meson
+# 	apk:startup-notification-devel
+# 	apk:xcb-util-cursor-devel
+$(PREFIX)/bin/rofi:
+	git clone https://davatorium/rofi.git $(PREFIX)/src/rofi
+	sh -c 'cd $(PREFIX)/src/rofi; meson setup build'
+	ninja -C $(PREFIX)/src/rofi/build install
+
+# depends on
+# 	apk:autoconf
+# 	apk:autoconf-archive
+# 	apk:imlib2-devel
+# 	apk:libxcomposite-devel
+# 	apk:libxfixes-devel
+$(PREFIX)/bin/scrot:
+	git clone https://github.com/resurrecting-open-source-projects/scrot.git "$(PREFIX)"/src/scrot
+	sh -c 'cd $(PREFIX)/src/scrot && ./autogen.sh && ./configure MAKE=$(MAKE) PREFIX=$(PREFIX)'
+	$(MAKE) -C $(PREFIX)/src/scrot install
+
+# depends on
+#	apk:g++
+$(PREFIX)/bin/unrar:
+	git clone https://github.com/pmachapman/unrar.git "$(PREFIX)"/src/unrar
+	$(MAKE) -C "$(PREFIX)"/src/unrar
+	$(INSTALL) -Dm0755 "$(PREFIX)"/src/unrar/unrar "$(PREFIX)"/bin/unrar
+
+# I tried final_official_2.50 but it wouldn't build
+# (ld: error: duplicate symbol: comDat)
+# depends on
+#	apk:sudo
+$(PREFIX)/src/wiringpi:
+	git clone https://github.com/WiringPi/WiringPi.git $(PREFIX)/src/wiringpi
+	git -C $(PREFIX)/src/wiringpi checkout 2.61-1
+	sed -i .old -e /^sudo/d $(PREFIX)/src/wiringpi/build
+	sed -i .old -e s/root\.root/root\:root/ $(PREFIX)/src/wiringpi/gpio
+	sh -c 'cd $(PREFIX)/src/wiringpi; sudo=sudo ./build'
+
+$(PREFIX)/bin/xdo:
+	git clone https://github.com/baskerville/xdo.git $(PREFIX)/src/xdo
+	$(MAKE) -C $(PREFIX)/src/xdo install
+
+$(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz:
+	mkdir -p $(PREFIX)/share/audacious/Skins
+	curl https://archive.org/download/winampskin_Sailor_Moon_Gang/Sailor_Moon_Gang.wsz -o $(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz
+
+# depends on
+#	apk:git
+$(PREFIX)/src/qemu-rpi-kernel:
+	git clone https://github.com/dhruvvyas90/qemu-rpi-kernel "$(PREFIX)"/src/qemu-rpi-kernel
+
+# depends on
+#	apk:git
+$(PREFIX)/src/moreutils:
+	git clone git://git.joeyh.name/moreutils "$(PREFIX)"/src/moreutils.tmp
+	mv "$(PREFIX)"/src/moreutils.tmp "$(PREFIX)"/src/moreutils
+
+# depends on
+#	apk:git
+$(PREFIX)/src/syslinux:
+	git clone --recursive https://repo.or.cz/syslinux.git "$(PREFIX)"/src/syslinux
+
+.PHONY: android-udev-rules
+android-udev-rules:
+	git clone https://github.com/M0Rf30/android-udev-rules.git "$(PREFIX)"/src/android-udev-rules
+	# rather than requiring user to be in `adbusers`, just use group wheel
+	sed -i .orig -e s/adbusers/wheel/g "$(PREFIX)"/src/android-udev-rules/51-android.rules
+	mkdir -p /etc/udev/rules.d
+	cp "$(PREFIX)"/src/android-udev-rules/51-android.rules /etc/udev/rules.d/51-android.rules
+	chmod a+r /etc/udev/rules.d/51-android.rules
+	udevadm control --reload-rules
+	# assumes dinit
+	dinitctl restart udevd
+
+
+.PHONY: unscii-pkgsrc
+unscii-pkgsrc:
+	$(MAKE) -C /usr/pkgsrc/fonts/unscii install clean clean-depends

soft/wip/syslinux

@@ -0,0 +1,293 @@
+# System utilities
+CC = cc
+CFLAGS = -Iinclude/ -Ilib/ -g -Wall -Wextra -Wpedantic
+HOME = /home/trinity
+PREFIX = /usr/local
+RM = rm -f
+
+all:
+
+HOMEPAGE_FILES = homepage propaganda/*
+dist/homepage:
+	mkdir -p dist/homepage.tmp
+	cp $(HOMEPAGE_FILES) dist/homepage.tmp
+	cd dist/homepage.tmp; sh homepage; cd ../..
+	$(RM) dist/homepage.tmp/homepage dist/homepage.tmp/homepage.local
+	mv dist/homepage.tmp dist/homepage
+dist/homepage.tar.gz: dist/homepage
+	tar cz -C dist/homepage . >dist/homepage.tar.gz
+
+# i made this script to fetch icons for my grandmother and put them in icons/
+# so i wouldn't have to fetch the icons for her desktop when i made her a new
+# system.
+# i could have downloaded all the icons and put them into a repo for her but
+# this uses less space
+dist/grammy:	dist/grammy.tmp/989wclz.com.png \
+		dist/grammy.tmp/amazon.com.ico \
+		dist/grammy.tmp/bangordailynews.com.png \
+		dist/grammy.tmp/theguardian.com.png \
+		dist/grammy.tmp/centralmaine.com.png \
+		dist/grammy.tmp/dictionary.com.png \
+		dist/grammy.tmp/google.com.jpg \
+		dist/grammy.tmp/longfellowsgreenhouses.com.jpg \
+		dist/grammy.tmp/mainepublic.org.png \
+		dist/grammy.tmp/news.google.com.png \
+		dist/grammy.tmp/newscentermaine.com.png \
+		dist/grammy.tmp/pressherald.com.png \
+		dist/grammy.tmp/weather.com.png
+	mv dist/grammy.tmp dist/grammy
+dist/grammy.tmp:
+	mkdir -p dist/grammy.tmp
+dist/grammy.tmp/989wclz.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/989wclz.com.png" "https://web.archive.org/web/20200629174002if_/https://989wclz.com/wp-content/themes/wclz/img/touch-icon-144.png"
+dist/grammy.tmp/amazon.com.ico: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/amazon.com.ico" "https://web.archive.org/web/20200718050400if_/https://www.amazon.com/favicon.ico"
+dist/grammy.tmp/bangordailynews.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/bangordailynews.com.png" "http://web.archive.org/web/20200721195123if_/https://i0.wp.com/bdn-data.s3.amazonaws.com/uploads/2020/06/BDN-logo_green-3-1.png"
+dist/grammy.tmp/theguardian.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/theguardian.com.png" "https://web.archive.org/web/20200720041457if_/https://assets.guim.co.uk/images/favicons/fee5e2d638d1c35f6d501fa397e53329/152x152.png"
+dist/grammy.tmp/centralmaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/centralmaine.com.png" "https://web.archive.org/web/20200720023956if_/https://multifiles.pressherald.com/uploads/sites/2/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/dictionary.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/dictionary.com.png" "https://web.archive.org/web/20200719135458if_/https://www.dictionary.com/hp-assets/dcom_favicon-1bff2f1b49c077ed504e55c3649f2a4b.png"
+dist/grammy.tmp/google.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/google.com.jpg" "https://web.archive.org/web/20170621105937if_/https://yt3.ggpht.com/-v0soe-ievYE/AAAAAAAAAAI/AAAAAAAAAAA/OixOH_h84Po/s900-c-k-no/photo.jpg"
+dist/grammy.tmp/longfellowsgreenhouses.com.jpg: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/longfellowsgreenhouses.com.jpg" "https://web.archive.org/web/20200718173559im_/https://longfellowsgreenhouses.com/wp-content/uploads/2020/03/Longfellows-Logo-Light-Green.jpg"
+dist/grammy.tmp/mainepublic.org.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/mainepublic.org.png" "https://d3kle7qwymxpcy.cloudfront.net/images/broadcasts/e5/8e/30457/1/c300.png"
+dist/grammy.tmp/news.google.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/news.google.com.png" "https://upload.wikimedia.org/wikipedia/commons/0/0b/Google_News_icon.png"
+dist/grammy.tmp/newscentermaine.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/newscentermaine.com.png" "https://web.archive.org/web/20200721190548if_/https://www.newscentermaine.com/assets/favicons/WCSH.png?ver=2.4.7.4"
+dist/grammy.tmp/pressherald.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/pressherald.com.png" "https://multifiles.pressherald.com/uploads/sites/4/2014/06/apple-touch-icon-iphone-retina-display.png"
+dist/grammy.tmp/weather.com.png: dist/grammy.tmp
+	curl -o "dist/grammy.tmp/weather.com.png" "https://upload.wikimedia.org/wikipedia/commons/thumb/7/77/The_Weather_Channel_logo_2005-present.svg/1200px-The_Weather_Channel_logo_2005-present.svg.png"
+
+dist/ifpublic:
+	cp ifpublic/ifpublic dist/
+
+dist/pschdir:
+	$(MAKE) -C pschdir
+	cp pschdir/pschdir dist/pschdir
+
+dist/spacer.bin:
+	# creates an 8GB empty file
+	# that way when the alarm bells go off you can delete it to save a
+	# couple minutes before the system really runs out of disk
+	#
+	#     512     * 16777216 = 8GB
+	dd bs=512 count=16777216 </dev/zero >dist/spacer.bin
+
+dist/str:
+	$(MAKE) -C str
+	cp str/str dist/
+
+dist/streq:
+	$(MAKE) -C streq
+	cp streq/streq dist/
+
+$(HOME)/.fonts/unscii-16-full.ttf:
+	mkdir -p $(HOME)/.fonts/
+	curl -o $(HOME)/.fonts/unscii-16-full.ttf.tmp http://viznut.fi/unscii/unscii-16-full.ttf
+	mv $(HOME)/.fonts/unscii-16-full.ttf.tmp $(HOME)/.fonts/unscii-16-full.ttf
+
+# I never finished this because I realized it needed OpenJDK. Fuck Java.
+# depends on
+#	apk:chimerautils (on Chimera Linux)
+#	apk:curl
+$(PREFIX)/src/arduino18:
+	# the person that made the tarball used the absolute file location in
+	# the sha512 file, so it looks like
+	# [sum]  /home/user/dir/tarball.tar.xz
+	# so filter out the file locations before diffing
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz
+	curl -L https://github.com/arduino/Arduino/releases/download/1.8.19/arduino-1.8.19.tar.xz.sha512 \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512
+	sha512sum arduino-1.8.19.tar.xz \
+		| sed 's/  .*//' \
+		>"$(PREFIX)"/src/arduino-1.8.19.tar.xz.sha512.local
+	# if the sums differ the makefile will terminate
+	cat arduino-1.8.19.tar.xz.sha512 $(PREFIX)/src/arduino-1.8.19.tar.xz.sha512.local \
+		| uniq \
+		| wc -l \
+		| xargs echo \
+		| xargs test 1 =
+	xz -cd "$(PREFIX)"/src/arduino-1.8.19.tar.xz \
+		| tar -C "$(PREFIX)" x
+	mv "$(PREFIX)"/arduino-1.8.19 "$(PREFIX)"/arduino18
+
+$(PREFIX)/bin/bar:
+	git clone https://github.com/LemonBoy/bar.git "$(PREFIX)"/src/bar
+	$(MAKE) -C "$(PREFIX)"/src/bar PREFIX="$(PREFIX)" install
+
+# depends on
+# 	apk:clang
+# 	apk:git
+#	apk:gmake
+#	apk:libx11-devel
+#	apk:libxau-devel
+#	apk:libxcb-devel
+#	apk:libxinerama-devel
+#	apk:xcb-util-devel
+#	apk:xcb-util-keysyms-devel
+#	apk:xcb-util-wm-devel
+$(PREFIX)/bin/bspwm:
+	git clone https://github.com/baskerville/bspwm.git "$(PREFIX)"/src/bspwm
+	$(MAKE) -C "$(PREFIX)"/src/bspwm install
+
+# depends on:
+#	apk:git (build)
+#	apk:ncurses-devel (optional if curses.h is present on system)
+$(PREFIX)/bin/cmatrix:
+	git clone https://github.com/abishekvashok/cmatrix.git $(PREFIX)/src/cmatrix
+	sh -c 'cd "$(PREFIX)"/src/cmatrix; autoreconf -i && ./configure --prefix="$(PREFIX)"'
+	$(MAKE) -C "$(PREFIX)"/src/cmatrix install
+
+# game.tar should extract to
+# 'The Coffin of Andy and Leyley'/
+#	Game.exe
+#	[files on which Game.exe depends]
+# I originally got it as a RAR which I decompressed and packed into a TAR.
+# _CommonRedist/
+#	dotNetFx40_Full_setup.exe
+#	dxwebsetup.exe
+#	oalinst.exe
+#	vcredist_2015-2019_x64.exe
+#	vcredist_2015-2019_x86.exe
+#	vcredist_x64.exe
+#	vcredist_x86.exe
+#	xnafx40_redist.msi
+# depends on
+#	apk:curl
+#	apk:git
+#	apk:qemu-system-arm
+#	apk:xz
+$(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img:
+	mkdir -p "$(PREFIX)"/bin/coffin_files
+	curl http://downloads.raspberrypi.org/raspios_full_armhf/images/raspios_full_armhf-2021-11-08/2021-10-30-raspios-bullseye-armhf-full.zip -o "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+	tar -C "$(PREFIX)"/bin/coffin_files xf "$(PREFIX)"/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.zip
+#$(PREFIX)/bin/coffin: $(PREFIX)/bin/coffin_files/game.tar $(PREFIX)/bin/coffin_files/2021-10-30-raspios-bullseye-armhf-full.img $(PREFIX)/src/qemu-rpi-kernel
+
+# Installs the Python script without documentation because I'm lazy and don't
+# wanna run the upstream Makefile and then deal with filtering out the Python
+# stuff (which is specific to 3.6 which is a little outdated).
+# depends on apk:git apk:python
+$(PREFIX)/bin/git-filter-repo:
+	git clone https://github.com/newren/git-filter-repo.git $(PREFIX)/src/git-filter-repo
+	$(INSTALL) -Dm0755 $(PREFIX)/src/git-filter-repo/git-filter-repo $(PREFIX)/bin/git-filter-repo
+
+# depends on
+#	apk:git
+#	apk:texinfo
+$(PREFIX)/bin/macchanger:
+	git clone https://github.com/alobbs/macchanger.git "$(PREFIX)"/src/macchanger
+	sh -c 'cd "$(PREFIX)"/src/macchanger; ./autogen.sh --prefix=/usr/local/'
+	# https://github.com/alobbs/macchanger/issues/14
+	sed -i .orig -e 's/caddr_t/void */' "$(PREFIX)"/src/macchanger/src/netinfo.c
+	$(MAKE) -C "$(PREFIX)"/src/macchanger install
+
+# nmap 7.80 is the last Free nmap release
+# depends on apk:linux-headers
+# had to # ln -s /bin/gmake /usr/local/bin/make
+# with clang 16.0.6 aarch75-chimera-linux-musl, cannot compile (4 errors?)
+$(PREFIX)/bin/nmap:
+	curl "https://nmap.org/dist/nmap-7.80.tar.bz2" | bzip2 -cd | tar x -C /usr/local/src/
+	cd /usr/local/src/nmap-7.80; ./configure --prefix=/usr/local
+	$(MAKE) -C /usr/local/src/nmap-7.80
+
+# depends on
+#	apk:git
+$(PREFIX)/bin/pandoc: $(PREFIX)/bin/cabal
+	git clone https://github.com/jgm/pandoc.git "$(PREFIX)"/src/pandoc.tmp
+	mv "$(PREFIX)"/pandoc.tmp "$(PREFIX)"/pandoc
+
+# depends on
+# 	apk:bison
+# 	apk:cairo-devel
+# 	apk:flex
+# 	apk:gdk-pixbuf-devel
+# 	apk:glib-devel
+# 	apk:libxkbcommon-devel
+# 	apk:pango-devel
+# 	apk:pkgconf
+# 	apk:meson
+# 	apk:startup-notification-devel
+# 	apk:xcb-util-cursor-devel
+$(PREFIX)/bin/rofi:
+	git clone https://davatorium/rofi.git $(PREFIX)/src/rofi
+	sh -c 'cd $(PREFIX)/src/rofi; meson setup build'
+	ninja -C $(PREFIX)/src/rofi/build install
+
+# depends on
+# 	apk:autoconf
+# 	apk:autoconf-archive
+# 	apk:imlib2-devel
+# 	apk:libxcomposite-devel
+# 	apk:libxfixes-devel
+$(PREFIX)/bin/scrot:
+	git clone https://github.com/resurrecting-open-source-projects/scrot.git "$(PREFIX)"/src/scrot
+	sh -c 'cd $(PREFIX)/src/scrot && ./autogen.sh && ./configure MAKE=$(MAKE) PREFIX=$(PREFIX)'
+	$(MAKE) -C $(PREFIX)/src/scrot install
+
+# depends on
+#	apk:g++
+$(PREFIX)/bin/unrar:
+	git clone https://github.com/pmachapman/unrar.git "$(PREFIX)"/src/unrar
+	$(MAKE) -C "$(PREFIX)"/src/unrar
+	$(INSTALL) -Dm0755 "$(PREFIX)"/src/unrar/unrar "$(PREFIX)"/bin/unrar
+
+# I tried final_official_2.50 but it wouldn't build
+# (ld: error: duplicate symbol: comDat)
+# depends on
+#	apk:sudo
+$(PREFIX)/src/wiringpi:
+	git clone https://github.com/WiringPi/WiringPi.git $(PREFIX)/src/wiringpi
+	git -C $(PREFIX)/src/wiringpi checkout 2.61-1
+	sed -i .old -e /^sudo/d $(PREFIX)/src/wiringpi/build
+	sed -i .old -e s/root\.root/root\:root/ $(PREFIX)/src/wiringpi/gpio
+	sh -c 'cd $(PREFIX)/src/wiringpi; sudo=sudo ./build'
+
+$(PREFIX)/bin/xdo:
+	git clone https://github.com/baskerville/xdo.git $(PREFIX)/src/xdo
+	$(MAKE) -C $(PREFIX)/src/xdo install
+
+$(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz:
+	mkdir -p $(PREFIX)/share/audacious/Skins
+	curl https://archive.org/download/winampskin_Sailor_Moon_Gang/Sailor_Moon_Gang.wsz -o $(PREFIX)/share/audacious/Skins/Sailor_Moon_Gang.wsz
+
+# depends on
+#	apk:git
+$(PREFIX)/src/qemu-rpi-kernel:
+	git clone https://github.com/dhruvvyas90/qemu-rpi-kernel "$(PREFIX)"/src/qemu-rpi-kernel
+
+# depends on
+#	apk:git
+$(PREFIX)/src/moreutils:
+	git clone git://git.joeyh.name/moreutils "$(PREFIX)"/src/moreutils.tmp
+	mv "$(PREFIX)"/src/moreutils.tmp "$(PREFIX)"/src/moreutils
+
+# depends on
+#	apk:git
+$(PREFIX)/src/syslinux:
+	git clone --recursive https://repo.or.cz/syslinux.git "$(PREFIX)"/src/syslinux
+
+.PHONY: android-udev-rules
+android-udev-rules:
+	git clone https://github.com/M0Rf30/android-udev-rules.git "$(PREFIX)"/src/android-udev-rules
+	# rather than requiring user to be in `adbusers`, just use group wheel
+	sed -i .orig -e s/adbusers/wheel/g "$(PREFIX)"/src/android-udev-rules/51-android.rules
+	mkdir -p /etc/udev/rules.d
+	cp "$(PREFIX)"/src/android-udev-rules/51-android.rules /etc/udev/rules.d/51-android.rules
+	chmod a+r /etc/udev/rules.d/51-android.rules
+	udevadm control --reload-rules
+	# assumes dinit
+	dinitctl restart udevd
+
+
+.PHONY: unscii-pkgsrc
+unscii-pkgsrc:
+	$(MAKE) -C /usr/pkgsrc/fonts/unscii install clean clean-depends

status/.gitignore

@@ -0,0 +1,4 @@
+*.o
+order.c
+settings.c
+status

status/Makefile

@@ -0,0 +1,28 @@
+CFLAGS += -g
+
+.PHONY: run
+run: status
+	./status
+
+.PHONY: cleanall
+cleanall: clean
+	rm -f order.c settings.c
+
+.PHONY: clean
+clean:
+	rm -f status *.o
+
+status: status.c order.c libio.o libkeyval.o
+	time $(CC) $(CFLAGS) -o $@ $@.c libio.o libkeyval.o
+
+order.c: order.def.c
+	- cp -v order.def.c $@
+
+libio.o: libio.c libio.h
+	$(CC) $(CFLAGS) -c -o $@ libio.c
+
+libkeyval.o: libkeyval.c libkeyval.h settings.c
+	$(CC) $(CFLAGS) -c -o $@ libkeyval.c
+
+settings.c: settings.def.c
+	- cp -v settings.def.c $@

status/README

@@ -0,0 +1,13 @@
+   __  ___  __  ___  _  _  __
+  / _//   //  //   // // // _/ STATUS
+ _'.  / // _  // / / // /_'.   how's your day going?
+/__/ /_//_//_//_/  /__/ /__/   2025 DTB. Public Domain.
+
+build: $ make
+
+libio.c, libio.h:         libio, a wrapper around I/O functions for status(1)
+libkeyval.c, libkeyval.h: libkeyval, a key/value system for status(1)
+*.def.c:                  the default for foo.c, a configuration file #included
+                          directly in a source-file
+mod_*.c:                  modules to be #included directly in status.h
+status.c:                 main() and boilerplate

status/libio.c

@@ -0,0 +1,19 @@
+/* 2025 DTB. Public Domain. */
+#undef NDEBUG /* LOAD-BEARING ASSERTS! */
+#include <assert.h> /* assert(3) */
+#include <errno.h> /* errno */
+#include <stdio.h> /* fputs(3), stdout, NULL */
+#include "libio.h"
+
+/* output */
+static char *hold = NULL;
+
+void
+drop(void) { hold = NULL; }
+
+void
+out(char *s) {
+	if (hold != NULL)
+		{ errno = 0; fputs(hold, stdout); assert(errno == 0); }
+	hold = s;
+}

status/libio.h

@@ -0,0 +1,8 @@
+/* 2025 DTB. Public Domain. */
+
+/* libio is a microscopic library that exists to separate less relevant code
+ * from status(1). It should not be used in critical applications for lack of
+ * recoverability (as opposed to <stdio.h> on its own). */
+
+void drop(void);   /* Set the buffer to NULL. */
+void out(char *s); /* Print the buffer if not NULL and replace it with s. */

status/libkeyval.c

@@ -0,0 +1,68 @@
+/* 2025 DTB. Public domain. */
+
+#undef NDEBUG /* LOAD-BEARING ASSERTS! */
+#include <assert.h> /* assert(3) */
+#include <stdlib.h> /* atoi(3) */
+#include <string.h> /* strcmp(3) */
+#include "libkeyval.h"
+
+static struct State state = { 0 };
+
+void
+cpy(char *key) {
+	state.settings[state.setting_last].key = key;
+	state.settings[state.setting_last].val = get(key);
+	assert(++state.setting_last < state_settings_size);
+}
+
+void
+del(char *key) {
+	size_t i;
+	for (i = idx(key); i < state.setting_last; ++i) {
+		state.settings[i].key = state.settings[i + 1].key;
+		state.settings[i].val = state.settings[i + 1].val;
+	}
+	--state.setting_last;
+}
+
+char *
+get(char *key) { return state.settings[idx(key)].val; }
+
+int
+getd(char *key) { return atoi(get(key)); }
+
+size_t
+idx(char *key) {
+	size_t r;
+	for (r = 0; state.settings[r].key != NULL
+				&& strcmp(state.settings[r].key, key) != 0;
+			++r);
+	return (state.settings[r].key == NULL) ? state.setting_last : r;
+}
+
+void
+keyval_init(void) {
+	/* Unnecessary, but means a wrong state.setting_last won't blow up. */
+	(void)memset(&state.settings[state.setting_last],
+		state_settings_size - state.setting_last, '\0');
+#include "settings.c"
+}
+
+size_t
+ren(char *key, char *new) {
+	size_t i;
+	if ((i = idx(key)) != state.setting_last)
+		{ state.settings[i].key = new; }
+	return i;
+}
+
+size_t
+set(char *key, char *val) {
+	size_t i;
+	i = idx(key);
+	state.settings[i].key = key;
+	state.settings[i].val = val;
+	if (i == state.setting_last)
+		{ assert(++state.setting_last < state_settings_size); }
+	return i;
+}

status/libkeyval.h

@@ -0,0 +1,29 @@
+/* 2025 DTB. Public domain. */
+
+/* libkeyval is a key/value store library to be used for nonessential
+ * applications due to lack of recoverability (errors fail assert(3)).
+ * libkeyval deals with pointers and pointers only, and an effort has been made
+ * to reflect the simplicity of the procedure in the code itself. */
+
+/* keyval store */
+#ifndef state_settings_size
+#	define state_settings_size 100
+#endif
+
+struct State {
+	size_t setting_last;
+	struct Setting { char *key; char *val; } settings[state_settings_size];
+};
+
+void    cpy(char *key); /* Duplicate the setting key. */
+void    del(char *key); /* Delete the first instance of key in settings. */
+char *  get(char *key); /* Get the corresponding val to key in settings. */
+int    getd(char *key); /* get() that returns a decimal number if key was a
+                         * number, or 0. */
+void keyval_init(void); /* Sanitize the settings store. */
+size_t  idx(char *key); /* Returns the index of key if in settings, or
+                         * state.setting_last. */
+size_t ren(char *key, char *dst); /* Rename the first instance of key in
+                                   * settings. */
+size_t set(char *key, char *val); /* Set the first instance of key in
+                                   * settings. */

status/mod_static.c

@@ -0,0 +1,5 @@
+// #include "io.h" /* out(3) */
+// #include "keyval.h" /* get(3) */
+
+void
+mod_static(char *s) { out(s); out(get("separator")); }

status/mod_time.c

@@ -0,0 +1,35 @@
+/* 2025 DTB. Public Domain. */
+// #undef NDEBUG /* LOAD BEARING ASSERTS */
+// #include <assert.h> /* assert(3) */
+// #include <stdlib.h> /* setenv(3), unsetenv(3), NULL */
+// #include <time.h> /* localtime(3), strftime(3), time(2), tzset(3), time_t,
+//                    * struct tm */
+// #include "io.h" /* out(3) */
+// #include "keyval.h" /* get(3) */
+#ifndef mod_time_bufsize
+#	define mod_time_bufsize 100
+#endif
+
+void
+set_timezone(char *zone) {
+	if (zone == NULL) { assert(unsetenv("TZ") == 0); }
+	else { assert(setenv("TZ", zone, 1) == 0); }
+	tzset();
+}
+
+void
+mod_time(char *fmt) {
+	static char buf[mod_time_bufsize];
+	struct tm *tm;
+	static time_t t = 0;
+	static tick_t last_tick = 0;
+
+	if (ticker == 0) { t = time(NULL); }
+	else if (ticker != last_tick) { t += slept; }
+	last_tick = ticker;
+	assert((tm = localtime(&t)) != NULL);
+	assert(strftime(buf, sizeof(buf) / sizeof(*buf), fmt, tm) != 0);
+
+	out(buf);
+	out(get("separator"));
+}

status/order.def.c

@@ -0,0 +1,52 @@
+/* This is a C source file #included at global scope in status.c. There are a
+ * number of useful functions defined in status.c and #included headers to try
+ * to make iteration a little more convenient. */
+
+/* Environment
+ * getenv(key) gets the value of an environment variable
+ * setenv(key, val, overwrite) sets key to val in the environment, overwriting
+ *	val if key was already defined and overwrite is 0
+ * set_timezone(val) sets TZ to val in the environment, then calls tzset(3) to
+ *	set appropriate timezone values. if val is NULL, it clears the TZ val,
+ *	which restores the timezone to the system local time
+ * get(key) gets the val corresponding to key in settings
+ * set(key, val) sets the val corresponding to key in settings
+ * idx(key) returns the index of key in settings
+ * del(key) deletes the first instance of key in settings
+ * cpy(key) creates an identical instance to key in settings
+ * ren(key, dst) renames key to dst in settings
+ * keyval_init() cleans the settings in case of a glitch */
+
+/* I/O
+ * out(s) holds s and prints what it was previously holding, if it wasn't NULL
+ * drop() sets out()'s held value to NULL */
+
+/* Modules
+ * mod_static(s) outputs s and then the separator val, unless mod_static() is
+ *	called as the last function in order
+ * mod_time(fmt) outputs the time for the current time zone in the strftime(3)
+ *	fmt */
+void
+order() {
+	/* there are a couple good ways to print without the separator. the
+	 * best is to use out() to write directly to the output buffer */
+	out("utc"); /* => "utc" */
+	/* but another way is to use status_static to write a message and
+	 * separator, then use drop() to recall the last thing written (always
+	 * the separator in status_* functions) */
+	mod_static(" "); drop(); /* => " " */
+	set_timezone("");
+	mod_time("%Y-%m-%dT%H:%M"); /* => "2025-03-27T00:00 // " */
+
+	/* and another way is to use the weird key-val system */
+	cpy("separator");      /* duplicate setting */
+	set("separator", " "); /* overwrite first setting */
+	set_timezone(NULL);
+	mod_static("local"); /* use first setting */
+	del("separator");       /* delete the first, restoring the second */
+	mod_time("%Y-%m-%dT%H:%M");
+	drop();
+	/* => "local 2025-03-26T18:00" */
+
+	/* all => "utc 2025-03-27T00:00 // local 2025-03-26T18:00" */
+}

status/settings.def.c

@@ -0,0 +1,2 @@
+set("interval_seconds", "1");
+set("separator", " // ");

status/status.c

@@ -0,0 +1,32 @@
+#undef NDEBUG /* LOAD-BEARING ASSERTS! */
+#include <assert.h> /* "mod_time.c" */
+#include <limits.h> /* UCHAR_MAX */
+#include <stdlib.h> /* "mod_time.c" */
+#include <time.h> /* "mod_time.c" */
+#include <unistd.h> /* sleep(3) */
+#include "libio.h" /* drop(3), out(3), "mod_static.c" */
+#include "libkeyval.h" /* cpy(3), del(3), get(3), keyval_init(3), set(3),
+		     * "mod_static.c" */
+
+#define ever (;;)
+
+unsigned int slept = 0;
+
+typedef unsigned char tick_t;
+#define TICK_MAX UCHAR_MAX
+tick_t ticker = 0;
+
+#include "mod_static.c"
+#include "mod_time.c"
+
+#include "order.c"
+
+int main(int argc, char *argv) {
+	keyval_init();
+
+	for ever {
+		order(); drop(); out("\n");
+		slept = sleep(getd("interval_seconds"));
+		ticker = ++ticker % TICK_MAX;
+	}
+}

trinitystuff/Makefile

@@ -11,6 +11,7 @@ TARGETS = \
 	$(HOME)/.config/sway/config \
 	$(HOME)/.env \
 	$(HOME)/.gitconfig \
+	$(HOME)/.ircrc \
 	$(HOME)/.nethackrc \
 	$(HOME)/.profile \
 	$(HOME)/.vimrc \
@@ -37,6 +38,10 @@ $(HOME)/.config/helix/config.toml: helix/config.toml
 	mkdir -p $(HOME)/.config/helix
 	ln -s helix/config.toml $@
 
+$(HOME)/.config/helix/languages.toml: helix/languages.toml
+	mkdir -p $(HOME)/.config/helix
+	ln -s helix/config.toml $@
+
 $(HOME)/.config/helix/themes/trinity.toml: helix/trinity.toml
 	mkdir -p $(HOME)/.config/helix/themes
 	ln -s helix/trinity.toml $@
@@ -67,6 +72,9 @@ $(HOME)/.env: sh/env
 $(HOME)/.gitconfig: git/gitconfig
 	cp git/gitconfig $@
 
+$(HOME)/.ircrc: ircII/ircrc
+	ln -s ircII/ircrc $@
+
 $(HOME)/.nethackrc: nethack/nethackrc
 	ln -s nethack/nethackrc $@
 

trinitystuff/helix/languages.toml

@@ -1,9 +1,9 @@
 [[language]]
 file-types = ["c"]
 indent.unit = "\t"
-indent.tab-width = 8
-language-id = "C"
-name = "C"
+indent.tab-width = 4
+language-id = "c"
+name = "c"
 roots = ["Makefile"]
 scope = "source.c"
 

trinitystuff/ircII/ircrc

@@ -0,0 +1 @@
+channel #subgeneral,#media

trinitystuff/nvim/init.lua

@@ -0,0 +1,26 @@
+vim.cmd.colorscheme("torte");
+vim.cmd.syntax("on");
+vim.cmd([[
+set mouse=
+set noautoindent
+set nocp
+set noexpandtab
+set noim
+set nois
+set nowrap
+
+call plug#begin('~/.vim/plugged')
+Plug 'Olical/conjure'
+Plug 'atweiden/vim-fennel'
+call plug#end()
+]]);
+vim.opt.bg = "dark";
+vim.opt.colorcolumn = "80";
+vim.opt.nu = true;
+vim.opt.relativenumber = true;
+vim.opt.rnu = true;
+vim.opt.ruler = true;
+vim.opt.tabstop = 8;
+vim.opt.tf = true;
+vim.opt.title = true;
+vim.opt.vb = true;

trinitystuff/nvim/init.vim

@@ -1,19 +0,0 @@
-colorscheme torte
-set bg=dark
-set colorcolumn=80
-set mouse=
-set noautoindent
-set nocp
-set noexpandtab
-set noim
-set nois
-set nu
-set relativenumber
-set rnu
-set ruler
-set tabstop=8
-set tf
-set title
-set vb
-set nowrap
-syntax on

trinitystuff/sh/aliases

@@ -1,22 +1,59 @@
 #!/bin/sh
 
+ls3(){
+	ls -1hlA --color=auto "$@";
+}
 #alias awk=nawk # not packaged for chimera
 alias cls=clear
 alias cp='cp -iv'
 alias doas="$SUDO"
 alias e="$EDITOR"
-alias ls='lsd -1A --long --icon never'
+if command -v lsd >/dev/null
+then	alias ls='lsd -1A --long --icon never'
+else	alias ls=ls3
+fi
 # shim for NetBSD X200 Tablet, Raspberry Pi 4B+
-alias mpv='LIBGL_ALWAYS_SOFTWARE=1 mpv --vo=x11' 
+alias mpv='mpv --vo=x11' 
 alias mullvad="curl https://am.i.mullvad.net/connected"
 alias mv='mv -iv'
+# workaround for Arch Linux ARM 2025-03
+alias nicotine="PYTHONPATH=/usr/lib/python3.11/site-packages/ nicotine"
+alias obsd1='doas virsh net-start --network default'
+alias obsd-1='doas virsh net-destroy --network default'
+alias obsd2='\
+doas qemu-system-aarch64 \
+	-enable-kvm -M virt -cpu host -m 1.5G \
+	-bios "$HOME"/Machines/QEMU_EFI.fd \
+	-device virtio-rng-device \
+	-device virtio-net,netdev=n0 \
+	-netdev bridge,id=n0,br=virbr0 \
+	-nographic \
+	-drive file="$HOME"/Machines/obsd.qcow2,media=disk,if=virtio \
+'
+alias obsd3='ssh 192.168.122.76'
+#	-nic user,model=virtio-net-pci \
 alias p='ping 1.1.1.1'
+alias secret="$SUDO mount /secret"
+alias usecret="$SUDO umount /secret"
 alias sensors='watch sensors'
 alias sudo="$SUDO"
+# please use responsibly
+alias torrent="TORSOCKS_ALLOW_INBOUND=1 torsocks -d aria2c --disable-ipv6 --enable-dht=false"
 alias units='units --history /dev/null'
 alias v="$VISUAL"
 # BEWARE -- injectable
 # (though unauthorized $EDITOR $VISUAL modification is a problem on its own)
-alias vidir="doas env EDITOR='$EDITOR' VISUAL='$VISUAL' vidir"
+alias vidir="doas env VISUAL='$VISUAL' vidir"
+alias winxp='
+weisu qemu-system-x86_64 \
+	-M pc -cpu qemu64 -m 1G \
+	-rtc base=localtime \
+	-device VGA,vgamem_mb=64 \
+	-device rtl8139,netdev=n0 \
+	-netdev bridge,id=n0,br=virbr0 \
+	-usb -device usb-tablet \
+	-monitor stdio \
+	-hda "$HOME"/Machines/winxp.qcow2 \
+'
 alias youtube-dl=yt-dlp
 alias yay=paru

trinitystuff/sh/profile

@@ -1,40 +1,61 @@
+#!/bin/sh
+
 BROWSER=netsurf-gtk; export BROWSER
+CARGO_MOMMYS_LITTLE=cat/catgirl/girl/kitten/kitty/lass/lassie; export CARGO_MOMMYS_LITTLE
 test -f /usr/lib/plan9 && PLAN9=/usr/lib/plan9
 test -f /usr/local/plan9 && PLAN9=/usr/local/plan9
 export PLAN9
 EDITOR="$PLAN9/bin/sam -d"; export EDITOR
+IRCNAME=dtb; export IRCNAME
+IRCSERVER=feeling.murderu.us; export IRCSERVER
+LIBGL_ALWAYS_SOFTWARE=1; export LIBGL_ALWAYS_SOFTWARE # Raspberry Pi shim
+MANPATH="$MANPATH:/usr/pkg/man"
+MOZ_ENABLE_WAYLAND=1; export MOZ_ENABLE_WAYLAND
+if	command -v bat >/dev/null
+	then	PAGER=bat
+elif	command -v less >/dev/null
+	then	PAGER=less
+else
+	PAGER=more
+fi
+export PAGER
 PATH="\
 /bin:\
 /sbin:\
 /usr/bin:\
 /usr/games:\
 /usr/sbin:\
-/usr/local/bin:\
-/usr/local/sbin:\
+/usr/X11R7/bin:\
 /usr/pkg/bin:\
 /usr/pkg/sbin:\
 /usr/pkg/qt5/bin:\
-/usr/X11R7/bin:\
+/usr/local/bin:\
+/usr/local/sbin:\
 $HOME/bin/:\
 $HOME/.local/bin:\
 $HOME/src/dist:\
 $PLAN9/bin:\
-$PATH"; export PATH
-PAGER=less; export PAGER
-TERMINAL=urxvt; export TERMINAL
+"; export PATH
+TERMINAL=foot; export TERMINAL
 UNITS_SYSTEM=si; export UNITS_SYSTEM
-if	command -v hx >/dev/null
+if	command -v nvim >/dev/null
+	then	VISUAL=nvim
+elif	command -v vim >/dev/null
+	then VISUAL=vim
+elif	command -v hx >/dev/null
 	then	VISUAL=hx
-elif	command -v vi >/dev/null
-	then	VISUAL=vi
+elif	command -v kak >/dev/null
+	then	VISUAL=kak
+else
+	VISUAL=vi
 fi
 export VISUAL
 WALLPAPER="$HOME/Pictures/Wallpapers/ghibli_wars.jpg"; export WALLPAPER
 XDG_RUNTIME_DIR="/tmp/$(id -u)-runtime-dir"; export XDG_RUNTIME_DIR
 
 # lowest to highest priority
-command -v sudo >/dev/null 2>&1 && SUDO="sudo" && export SUDO
-command -v doas >/dev/null 2>&1 && SUDO="doas" && export SUDO
+command -v sudo >/dev/null 2>&1 && SUDO=sudo && export SUDO
+command -v doas >/dev/null 2>&1 && SUDO=doas && export SUDO
 
-ENV=$HOME/.env; export ENV
-. $ENV
+ENV="$HOME"/.env; export ENV
+. "$ENV"

trinitystuff/sway/config

@@ -13,9 +13,13 @@ bar {
     }
     font Unscii:size=12
     position top
-    status_command while date +'%Y-%m-%dT%H:%M:%S'; do sleep 1; done
+    status_command bar
 }
 
+#bindsym Print exec grim
+#bindsym XF86AudioLowerVolume exec pactl set-sink-volume @DEFAULT_SINK@ 
+#bindsym XF86AudioRaiseVolume exec pactl set-sink-volume @DEFAULT_SINK@ 
+
 bindsym $mod+1 workspace number 1
 bindsym $mod+Shift+1 move container to workspace number 1
 bindsym $mod+2 workspace number 2
@@ -37,8 +41,12 @@ mode "resize" {
     bindsym Return mode "default"
 }
 bindsym $mod+Shift+r reload
+bindsym $mod+Shift+i exec rpi-backlight on
+bindsym $mod+Shift+o exec rpi-backlight off
 
-bindsym $mod+d exec followtrail | wofi --show dmenu | xargs swaymsg exec --
+#bindsym $mod+d exec followtrail | wofi --show dmenu | xargs swaymsg exec --
+#bindsym $mod+d exec dmenu-wl_run -i
+bindsym $mod+d exec rofi -show drun
 bindsym $mod+f fullscreen
 bindsym $mod+h focus left
 bindsym $mod+Shift+h move left
@@ -53,6 +61,8 @@ bindsym $mod+Return exec foot
 bindsym $mod+b splith
 bindsym $mod+Shift+b exec $BROWSER
 bindsym $mod+v splitv
+bindsym XF86MonBrightnessDown exec rpi-backlight down
+bindsym XF86MonBrightnessUp exec rpi-backlight up
 
 bindsym $mod+space focus mode_toggle
 bindsym $mod+Shift+space floating toggle
@@ -68,4 +78,11 @@ input "type:keyboard" {
     xkb_options ctrl:nocaps
 }
 
+# ClockworkPi uConsole
+output DSI-1 transform 90
+# output DSI-1 disable
+# output HDMI-A-1
+
 include /etc/sway/config.d/*
+
+exec mako

walk/walk.rs

@@ -0,0 +1,122 @@
+/*
+ * Copyright (c) 2024 DTB <trinity@trinity.moe>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ *
+ * This file incorporates work covered by the following copyright and permission
+ * notice:
+ *
+ *     Copyright 2019 Google LLC
+ *
+ *     Licensed under the Apache License, Version 2.0 (the "License");
+ *     you may not use this file except in compliance with the License.
+ *     You may obtain a copy of the License at
+ *
+ *         https://www.apache.org/licenses/LICENSE-2.0
+ *
+ *     Unless required by applicable law or agreed to in writing, software
+ *     distributed under the License is distributed on an "AS IS" BASIS,
+ *     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *     See the License for the specific language governing permissions and
+ *     limitations under the License.
+ */
+
+use std::{
+    env::{args, current_dir},
+    fs::{read_dir, DirEntry},
+    path::Path,
+};
+
+extern crate getopt;
+use getopt::{Opt, Parser};
+
+extern crate sysexits;
+use sysexits::{EX_SOFTWARE, EX_USAGE};
+
+enum Terminator {
+    USER,
+    NUL,
+    NEWL,
+    ASV,
+}
+
+/* Recursively walks d, yielding all contained files and folders. */
+fn walk(d: &Path, l: i8) -> impl Iterator<Item = DirEntry> {
+    assert!(d.is_dir());
+
+    // TODO: read_dir(d)??
+    for entry in read_dir(d)? {
+        let e = entry?;
+        yield e;
+        if e.is_dir() {
+            for f in walk(e.path(), l - 1)? {
+                yield f;
+            }
+        }
+    }
+}
+
+fn usage(s: &str) -> ExitCode {
+    eprintln!("Usage: {} (-0n) (-d [delimiter]) (-l [levels])", s);
+    ExitCode::from(EX_USAGE as u8)
+}
+
+fn main() -> ExitCode {
+    let argv = args().collect::<Vec<String>>();
+
+    let mut opts = Parser::new(&argv, "0d:l:nq");
+    let mut levels: i8 = -1;
+    let mut t: (Terminator, Option<String>) = (ASV, None);
+
+    loop {
+        match opts.next() {
+            None => break,
+            Some(opt) => match opt {
+                Ok(Opt('0', None)) => t = (NUL, None),
+                Ok(Opt('n', None)) => t = (NEWL, None),
+                Ok(Opt('d', Some(arg))) => t = (USER, arg),
+                Ok(Opt('l', Some(arg))) => match arg.parse::<u8>() {
+                    Ok(l) => levels = l,
+                    _ => {
+                        return usage(&argv[0]);
+                    }
+                },
+                _ => {
+                    return usage(&argv[0]);
+                }
+            },
+        }
+    }
+    /* t.2 can only be Some if t.1 is USER */
+    assert_eq!(t.1 == USER, !t.2.is_none());
+
+    //	if(*argv == NULL)
+    //		argv = dot;
+    //
+    //	{
+    //		int retval;
+    //
+    //		for(retval = 0; *argv != NULL; ++argv)
+    //			if((retval = walk(*argv, levels, verbosity >= 2 ? argv0 : NULL))
+    //					!= EX_OK){
+    //				if(verbosity >= 1)
+    //					fprintf(stderr, "%s: %s: %s\n",
+    //						argv0, *argv, strerror(errno));
+    //				return retval;
+    //			}
+    //	}
+
+    EX_OK as u8
+}