tests: bonsai/peek.mk

I could trace strcmp(1) as far back as
<293436c5ad/src/streq.c>
in my repo.

.editorconfig

@@ -12,6 +12,3 @@ indent_size = 2
 
 [*.sh]
 indent_size = 2
-
-[configure]
-indent_size = 2

CONDUCT

@@ -0,0 +1,83 @@
+Code of Conduct
+
+This Code of Conduct is derived from the 10 Pāramitās of Theravadin Buddhism.
+You can read more about them in Ṭhānissaro Bhikkhu’s Ten Perfections: A Study
+Guide [0].
+
+1. Generosity (Dāna)
+
+Give contributions freely and willingly under the terms of the GNU Affero
+General Public License, version 3 or later, or a compatible license.
+
+2. Ethics (Sīla)
+
+Do not use nonfree code or uncredited code in contributions. Do not contribute
+code of dubious origins, such as code generated by large language models or
+unlicensed snippets found online [1]. Do not take credit for others’
+contributions. Make sure to utilize the copyright header and license notice on
+source files to credit yourself and others for their work.
+
+3. Renunciation (Nekkhamma)
+
+Stay committed to the principles of simplicity and interoperability embodied by
+the project. Keep your personal will and desire out of the project, for it can
+only prove harmful to its success.
+
+4. Wisdom (Pañña)
+
+Look to established sources for standards, best practices, and important
+implementation details when setting new precedence. Follow the existing
+precedence where it applies.
+
+5. Energy (Viriya)
+
+Focus on the currently-open, currently-assigned, and currently-in-progress
+issues, pull requests, and other endeavors in order to keep yourself and others
+from being overwhelmed with responsibility, either from your zeal or your
+negligence.
+
+If you notice an issue, open an issue as soon as you can. If you see a neglected
+branch, open a pull request or comment on an existing one, if applicable. Be
+diligent in your commitment to making this project work.
+
+6. Patience (Khanti)
+
+Be patient with maintainers and other contributors. We all have our own lives
+going on and may need significant time to get to things.
+
+7. Truthfulness (Sacca)
+
+Communicate honestly and openly. Do not embellish facts to get your way. Make
+sure to let maintainers know about any issues along the way and keep ample
+communication channels open.
+
+8. Determination (Adhiṭṭhāna)
+
+Stay focused on long-term objectives and cultivate attainment to that
+achievement by utilizing to the fullest extent possible the tools available to
+you for managing the workload.
+
+9. Loving-Kindness (Mettā)
+
+Treat everyone with respect, even if they treat you poorly. This does not mean
+you have to put up with abuse, but make sure to respond with kindness and with
+love in your heart. Support and uplift maintainers and other contributors with
+your words and actions.
+
+Do not use angry or hateful language toward contributors, such as demeaning
+phrases and slurs. Make sure that if you do not know the pronouns of a
+contributor to ask for them and, in the meantime, use gender-neutral they/them
+or equivalent pronouns.
+
+10. Equanimity (Upekkhā)
+
+Keep a balanced perspective on all suggestions and contributions and make
+judgements not from a place of ego and personal preference but on their
+usefulness and suitability to the project. Make sure to keep an eye on the
+bigger picture as implementing individual features may seem intuitive at first
+but scale poorly in practical use. Keep a level head about your own work: it is
+not shameful to make a mistake in this vein, and fixing it usually leads to
+more insight.
+
+[0] <https://www.dhammatalks.org/books/#/books/TenPerfections/Section0001.html>
+[1] <https://www.fsf.org/news/publication-of-the-fsf-funded-white-papers-on-questions-around-copilot>

CONTRIBUTING

@@ -1,3 +1,5 @@
+Make sure to read our code of conduct in the CONDUCT file.
+
 When contributing a pull request to the main branch, please sign your commits
 with a PGP key and add your name and the year to the bottom of the list of
 copyright holders for the file. For example, an existing copyright header might
@@ -90,26 +92,46 @@ notice:
  *     USE OR OTHER DEALINGS IN THE SOFTWARE.
  */
 
-When writing code, make sure lines never exceed 80 characters in width when
-using four-character-wide indentation steps.
+Make sure lines never exceed 80 columns in width when using four-character
+indentation steps. This helps contributors with smaller screens, those using
+side-by-side editor windows or panes, and those who have no text wrapping in
+their editor or terminal.
 
-For usage text and help messages, please do not implement a -h option. Just
-print usage information when any erroneous option is specified. Follow the
-NetBSD style guide for usage text output format [1].
+For usage text and help messages, do not implement a -h option. Instead, print
+usage information when any erroneous option is specified. Follow the NetBSD
+style guide for the usage text’s output format [0].
 
-If committing a new source file for a utility, format the commit message like
-this:
+If committing a new utility, please include tests and documentation (see
+tests/ and docs/) for the new tool.
 
-$ git commit -m 'tool(1): <information>'
+If committing a new source file, format the commit message following these
+guidelines:
+
+$ git commit -m 'tool(1): add feature x'
 
 If committing a new library or header file:
 
-$ git commit -m 'library(1): <information>'
+$ git commit -m 'library(3): fix overflow'
+$ git commit -m 'header.h(3): add header.h(3)'
+
+If committing a new manual page:
+
+$ git commit -m 'tool.1: add author details'
 
 If modifying some other file or directory:
 
-$ git commit -m 'README: clarification'
-$ git commit -m 'tests: posix: fixed bug #47'
-$ git commit -m 'docs: tool(1): added author information'
+$ git commit -m 'README: clarify'
+$ git commit -m 'tests/posix: fix bug #47'
 
-etc.
+For multiple of these:
+
+$ git commit -m 'Makefile, tool(1): add tool(1)'
+$ git commit -m 'tool(1): add tool(1); library(3), library.3: add library(3)'
+$ git commit -m 'tool(1): fix #42 & add feature x'
+
+Commit messages should be written in the present tense.
+
+[0] <http://cvsweb.netbsd.org/bsdweb.cgi/~checkout~/src/share/misc/style>
+--
+This work © 2023–2024 by Emma Tebibyte is licensed under CC BY-SA 4.0. To view a
+copy of this license, visit <http://creativecommons.org/licenses/by-sa/4.0/>

Makefile

@@ -1,61 +1,106 @@
 # Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
 # Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
 # Copyright (c) 2023 Sasha Koshka <sashakoshka@tebibyte.media>
+# Copyright (c) 2024 Aaditya Aryal <aryalaadi123@gmail.com>
 # SPDX-License-Identifier: FSFAP
 #
 # Copying and distribution of this file, with or without modification, are
 # permitted in any medium without royalty provided the copyright notice and this
 # notice are preserved.  This file is offered as-is, without any warranty.
 
+# The octal escape \043 is utilized twice in this file as make(1p) will
+# interpret a hash in a rule as an inline comment.
+
 .POSIX:
-.PRAGMA: posix_202x # future POSIX standard support à la pdpmake(1)
-.PRAGMA: command_comment # breaks without this?
 
-PREFIX=/usr/local
+DESTDIR ?= dist
+PREFIX ?= /usr/local
 
-CC=cc
-RUSTC=rustc
+# for conditionally compiling OS features
+OS != uname
+OS_INCLUDE != test -e include/$(OS).mk && printf 'include/$(OS).mk\n' \
+	|| printf '/dev/null\n'
+
+# normalized prefix
+PREFIX_N != dirname $(PREFIX)/.
+MANDIR != test $(PREFIX_N) = / && printf '/usr/share/man\n' \
+	|| printf '/share/man\n'
+SYSEXITS != printf '\043include <sysexits.h>\n' | cpp -M - | tr ' ' '\n' \
+	| sed -n 's/sysexits\.h//p' || printf 'include\n'
+
+CC ?= cc
+RUSTC ?= rustc
+RUSTFLAGS += --extern getopt=build/o/libgetopt.rlib \
+	--extern strerror=build/o/libstrerror.rlib \
+	--extern sysexits=build/o/libsysexits.rlib
+CFLAGS += -I$(SYSEXITS)
+
+# testing requires the absolute path to the bin directory set
+BIN = build/bin
+
+.PHONY: default
+default: all test
 
 .PHONY: all
-all: dj false fop intcmp rpn scrut str strcmp true
+all: dj false fop hru intcmp mm npc peek rpn scrut str strcmp swab true
 
+# keep build/include until bindgen(1) has stdin support
+# https://github.com/rust-lang/rust-bindgen/issues/2703
 build:
-	# keep build/include until bindgen(1) has stdin support
-	# https://github.com/rust-lang/rust-bindgen/issues/2703
-	mkdir -p build/bin build/include build/lib build/o build/test
+	mkdir -p build/bin build/docs build/include build/lib build/o build/test
 
 .PHONY: clean
 clean:
-	rm -rf build/ dist/
+	rm -rf build dist
 
-dist: all
-	mkdir -p dist/bin dist/share/man/man1
-	cp build/bin/* dist/bin/
-	cp docs/*.1 dist/share/man/man1/
+dist: all docs
+	mkdir -p $(DESTDIR)/$(PREFIX)/bin $(DESTDIR)/$(PREFIX)/$(MANDIR)/man1
+	cp build/bin/* $(DESTDIR)/$(PREFIX)/bin
+	cp build/docs/*.1 $(DESTDIR)/$(PREFIX)/$(MANDIR)/man1
 
 .PHONY: install
 install: dist
-	mkdir -p $(PREFIX)
-	cp -r dist/* $(PREFIX)/
+	cp -r $(DESTDIR)/* /
+
+include tests/tests.mk
 
 .PHONY: test
-test: build
-	tests/posix-compat.sh
-	$(RUSTC) --test src/getopt-rs/lib.rs -o build/test/getopt
+test: all $(TESTS) /tmp/getopt
+	@echo $(TESTS)
+	/tmp/getopt
 
-build/o/libsysexits.rlib: build
-	# bandage solution until bindgen(1) gets stdin support
-	printf '#define EXIT_FAILURE 1\n' | cat - include/sysexits.h \
-		> build/include/sysexits.h 
+/tmp/getopt: src/libgetopt.rs
+	$(RUSTC) --test -o /tmp/getopt src/libgetopt.rs
+
+.PHONY: docs
+docs: docs/ build
+	for file in docs/*; do original="$$(sed -n '/^\.TH/p' <"$$file")"; \
+		title="$$(printf '%s\n' "$$original" | sed \
+		"s/X\.X\.X/$$(git describe --tags --long | cut -d'-' -f1)/g")"; \
+		sed "s/$$original/$$title/g" <"$$file" >"build/$$file"; done
+
+# include OS feature libraries for compilation
+include $(OS_INCLUDE)
+
+.PHONY: rustlibs
+rustlibs: build/o/libgetopt.rlib build/o/libstrerror.rlib \
+	 build/o/libsysexits.rlib $(OSLIB)
+
+build/o/libgetopt.rlib: build src/libgetopt.rs
+	$(RUSTC) $(RUSTFLAGS) --crate-type=lib --crate-name=getopt \
+		-o $@ src/libgetopt.rs
+
+build/o/libstrerror.rlib: build src/libstrerror.rs
+	$(RUSTC) $(RUSTFLAGS) --crate-type=lib -o $@ \
+		src/libstrerror.rs
+
+build/o/libsysexits.rlib: build/include/sysexits.h
 	bindgen --default-macro-constant-type signed --use-core --formatter=none \
-		"$$(printf '#include <sysexits.h>\n' \
-			| cpp -M -idirafter "build/include" - \
-			| sed 's/ /\n/g' | grep sysexits.h)" \
-		| $(RUSTC) $(RUSTFLAGS) --crate-type lib -o build/o/libsysexits.rlib -
+		build/include/sysexits.h | $(RUSTC) $(RUSTFLAGS) --crate-type lib -o $@ -
 
-build/o/libgetopt.rlib: src/getopt-rs/lib.rs
-	$(RUSTC) $(RUSTCFLAGS) --crate-type=lib --crate-name=getopt \
-		-o build/o/libgetopt.rlib src/getopt-rs/lib.rs
+# bandage solution until bindgen(1) gets stdin support
+build/include/sysexits.h: build $(SYSEXITS)sysexits.h
+	printf '\043define EXIT_FAILURE 1\n' | cat - $(SYSEXITS)sysexits.h > $@
 
 .PHONY: dj
 dj: build/bin/dj
@@ -69,22 +114,38 @@ build/bin/false: src/false.c build
 
 .PHONY: fop
 fop: build/bin/fop
-build/bin/fop: src/fop.rs build build/o/libgetopt.rlib build/o/libsysexits.rlib
-	$(RUSTC) $(RUSTFLAGS) --extern getopt=build/o/libgetopt.rlib \
-		--extern sysexits=build/o/libsysexits.rlib \
-		-o $@ src/fop.rs
+build/bin/fop: src/fop.rs build rustlibs
+	$(RUSTC) $(RUSTFLAGS) -o $@ src/fop.rs
+
+.PHONY: hru
+hru: build/bin/hru
+build/bin/hru: src/hru.rs build rustlibs 
+	$(RUSTC) $(RUSTFLAGS) -o $@ src/hru.rs
 
 .PHONY: intcmp
 intcmp: build/bin/intcmp
-build/bin/intcmp: src/intcmp.c build
-	$(CC) $(CFLAGS) -o $@ src/intcmp.c
+build/bin/intcmp: src/intcmp.rs build rustlibs
+	$(RUSTC) $(RUSTFLAGS) -o $@ src/intcmp.rs
+
+.PHONY: mm
+mm: build/bin/mm
+build/bin/mm: src/mm.rs build rustlibs 
+	$(RUSTC) $(RUSTFLAGS) -o $@ src/mm.rs
+
+.PHONY: npc
+npc: build/bin/npc
+build/bin/npc: src/npc.c build
+	$(CC) $(CFLAGS) -o $@ src/npc.c
+
+.PHONY: peek
+peek: build/bin/peek
+build/bin/peek: src/peek.c build
+	$(CC) $(CFLAGS) -o $@ src/peek.c
 
 .PHONY: rpn
 rpn: build/bin/rpn
-build/bin/rpn: src/rpn.rs build build/o/libsysexits.rlib
-	$(RUSTC) $(RUSTFLAGS) \
-		--extern sysexits=build/o/libsysexits.rlib \
-		-o $@ src/rpn.rs
+build/bin/rpn: src/rpn.rs build rustlibs
+	$(RUSTC) $(RUSTFLAGS) -o $@ src/rpn.rs
 
 .PHONY: scrut
 scrut: build/bin/scrut
@@ -101,6 +162,11 @@ strcmp: build/bin/strcmp
 build/bin/strcmp: src/strcmp.c build
 	$(CC) $(CFLAGS) -o $@ src/strcmp.c
 
+.PHONY: swab
+swab: build/bin/swab
+build/bin/swab: src/swab.rs build rustlibs
+	$(RUSTC) $(RUSTFLAGS) -o $@ src/swab.rs
+
 .PHONY: true
 true: build/bin/true
 build/bin/true: src/true.c build

README

@@ -1,28 +1,29 @@
 “Seek not to walk the path of the masters; seek what they sought.”
 – Matsuo Basho
 
-The Bonsai core utilities are the result of the careful examination of the
-current state of POSIX and Unix utilies. The Unix Philosophy, “do one thing and
-do it well” is its core but these tools do not cling to the names of the past.
+The Bonsai harakit utilities are a replacement for standard POSIX utilities
+which aim to fill its niche while expanding on their capabilities. These new
+tools are the result of the careful examination of the current state of POSIX
+and Unix utilies. The Unix Philosophy of “do one thing and do it well” are their
+core but they avoid clinging to the past.
 
 The era of the original Unix tools has been long and fruitful, but they have
-their flaws. The new, non-POSIX era of this project started with frustration
-with the way certain tools work and how other projects that extend POSIX don’t
-make anything better.
+their flaws. This project originated from frustrations with the way certain
+tools work and how other projects that extend POSIX don’t make anything better.
 
 This project will not follow in the footsteps of GNU; extensions of POSIX will
 not be found here. GNU extensions are a gateway to the misuse of the shell. The
-Bonsai core utilities will intentionally discourage use of the shell for
-purposes beyond its scope.
+harakit utilities will intentionally discourage use of the shell for purposes
+beyond its scope.
 
 See docs/ for more on the specific utilities currently implemented.
 
 Building
 
-The coreutils require a POSIX-compliant environment to compile, including a C
-compiler and preprocessor (cc(1) and cpp(1) by default) with the -idirafter
-flag, a Rust compiler (rustc(1) by default), bindgen(1), and a POSIX-compliant
-make(1) utility.
+Harakit utilities require a POSIX-compliant environment to compile, including a
+C compiler and preprocessor (cc(1) and cpp(1) by default), an edition 2023 Rust
+compiler (rustc(1) by default), bindgen(1), and a POSIX-compliant make(1)
+utility.
 
 To build and install:
 
@@ -38,7 +39,7 @@ To test the utilities:
 
 $ make test
 
-To remove all untracked files:
+To remove all build and distributable files:
 
 $ make clean
 

STYLE

@@ -0,0 +1,124 @@
+The following guidelines are conducive to clear and readable code that is
+consistent with the style of the rest of the Bonsai Computer System.
+
+0. Braces are mandatory for all control flow.
+
+1. Nested indentation should be kept to a minimum.
+
+2. Empty lines should be placed between different kinds of statements:
+
+	int t;
+
+	assert(io->bufuse > 0);
+	assert(io->bufuse <= io->bs);
+
+	if ((t = write(io->fd, io->buf, io->bufuse)) < 0) {
+		io->error = errno;
+		t = 0;
+	} else if (t > 0) {
+		memmove(io->buf, &(io->buf)[t], (io->bufuse -= t));
+	}
+
+	io->bytes += t;
+	io->prec  += (t > 0 && io->bufuse > 0);
+	io->rec   += (t > 0 && io->bufuse == 0);
+
+	return io;
+
+3. Each block of code should be indented once more than the keyword which
+initiated the block:
+
+	switch (c) {
+		case 'e': mode |= EQUAL;   break;
+		case 'g': mode |= GREATER; break;
+		case 'l': mode |= LESS;    break;
+		default:  return usage(s);
+	}
+
+4. In C, spaces should be placed in control flow statements after the keyword
+and before the opening brace:
+
+	for (i = 2; i < argc; ++i) {
+
+5. If a function, a C control flow statement, or a Rust macro has arguments that
+cause the statement to be broken into multiple lines, this should be done by
+placing the arguments on a new line inside the parentheses: 
+
+	let usage = format!(
+		"Usage: {} [-d delimiter] index command [args...]",
+		argv[0],
+	);
+
+6. If Rust function arguments or fields are on their own lines, they should
+always have a trailing comma:
+
+	return Err(EvaluationError {
+		message: format!("{}: Invalid token", i),
+		code: EX_DATAERR,
+	})
+
+7. If text is on the same line as a brace, spaces should be placed after an
+opening curly brace and before a closing one:
+
+	use sysexits::{ EX_DATAERR, EX_IOERR, EX_UNAVAILABLE, EX_USAGE };
+
+8. If a control flow statement is short enough to be easily understood in a
+glance, it may be placed on a single line:
+
+	if !(argc < 0) { usage(program_name); }
+
+9. In C, note everything you use from a library in a comment subsequent to its
+#include statement:
+
+	#include <unistd.h> /* close(2), getopt(3), lseek(2), read(2), write(2),
+                         * optarg, optind, STDIN_FILENO, STDOUT_FILENO */
+
+10. In Rust, place extern statements after use statements that include standard
+library crates. Group alike statements:
+
+	use std::fs::Path;
+
+	extern crate strerror;
+	extern crate sysexits;
+
+	use strerror::StrError;
+	use sysexits::{ EX_OSERR, EX_USAGE };
+
+11. Do not use do while loops in C.
+
+12. Adhere to the following rules from the paper The Power of 10: Rules for
+Developing Safety-Critical Code [0]:
+	1. Avoid complex flow constructs, such as goto and recursion.
+	2. All loops must have fixed bounds. This prevents runaway code.
+	3. Avoid heap memory allocation.
+	4. Restrict functions to the length of a single printed page.
+
+	6. Restrict the scope of data to the smallest possible.
+	7. Check the return value of all non-void functions, or cast to void to
+	indicate the return value is useless (such as in the case of using
+	fprintf(3p)	to print to the standard error).
+	8. Use the preprocessor sparingly.
+	9. Limit pointer use to a single dereference, and do not use function
+	pointers.
+	10. Compile with all possible warnings active; all warnings should then be
+	addressed before release of the software (for C compilers, compile with
+	-Wpedantic).
+
+13. Remember this quote from The Elements of Programming Style by Brian
+Kernighan:
+	Everyone knows that debugging is twice as hard as writing a program in the
+	first place. So if you're as clever as you can be when you write it, how
+	will you ever debug it?
+
+
+References
+==========
+
+[0] <https://web.eecs.umich.edu/~imarkov/10rules.pdf>
+
+--
+Copyright © 2024 Emma Tebibyte <emma@tebibyte.media>
+Copyright © Wikipedia contributors
+
+This work is licensed under CC BY-SA 4.0. To view a copy of this license, visit
+<http://creativecommons.org/licenses/by-sa/4.0/>.

docs/dj.1

@@ -1,160 +1,226 @@
 .\" Copyright (c) 2024 DTB <trinity@trinity.moe>
+.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-
-.TH dj 1
-
+.\"
+.TH DJ 1 2024-07-14 "Harakit X.X.X"
 .SH NAME
-
 dj \(en disk jockey
-
+.\"
 .SH SYNOPSIS
 
 dj
-.RB ( -AdHnq )
-.RB ( -a
-.RB [ byte ])
-.RB ( -c
-.RB [ count ])
+.RB [ -Hn ]
+.RB [ -a\ byte ]
+.RB [ -c\ count ]
 
-.RB ( -i
-.R [
-.B input file
-.R ])
-.RB ( -b
-.R [
-.B input block size
-.R ])
-.RB ( -s
-.R [
-.B input offset
-.R ])
+.RB [ -i\ file ]
+.RB [ -b\ block_size ]
+.RB [ -s\ offset ]
 
-.RB ( -o
-.R [
-.B output file
-.R ])
-.RB ( -B
-.R [
-.B output block size
-.R ])
-.RB ( -S
-.R [
-.B output offset
-.R ])
+.RB [ -o\ file ]
+.RB [ -B\ block_size ]
+.RB [ -S\ offset ]
+.\"
+.SH DESCRIPTION
 
-.SH USAGE
+Perform precise read and write operations on files. This utility is useful for
+reading and writing binary data to and from disks.
 
-The
-.B -i
-option takes a path as an argument to open and use in place of standard input.
-The
-.B -o
-option does the same in place of standard output. Dj does not truncate output
-files and instead writes over the bytes in the existing file.
-.PP
-The
-.B -b
-option takes a numeric argument as the size in bytes of the input buffer and
-the
-.B -B
-option does the same for the output buffer, the default for both being 1024
-bytes, or one kibibyte (KiB).
-.PP
-The
-.B -s
-option takes a numeric argument as the number of bytes to skip into the input
-before starting to read, and the
-.B -S
-option skips a number of bytes through the output before starting to write from
-the input. If the input is a stream the bytes are read and discarded. If the
-output is a stream, nul characters are printed.
-.PP
-The
-.B -a
-option takes one argument of one byte in length and pads the input buffer with
-that byte in the event that a read doesn't fill the input buffer, and the
-.B -A
-option takes no arguments and pads with nuls.
-The
-.B -c
-option specifies an amount of reads to make, and if 0 (the default) dj will
-continue reading until a partial or empty read.
-.PP
-On a partial or empty read, dj prints a diagnostic message (unless the
-.B -q
-option is specified) and exits (unless the
-.B -n
-option is specified, in which case only two consecutive empty reads will cause
-dj to exit).
-At exit, usage statistics are printed unless the option
-.B -q
-is specified a second time. The
-.B -H
-option will make these diagnostics human-readable.
+This manual page uses the terms \(lqskip\(rq and \(lqseek\(rq to refer to moving
+to a specified byte by index in the input and output of the program
+respectively. This language is inherited from the
+.BR dd (1p)
+utility and used here to decrease ambiguity.
 
+The offset used when skipping or seeking refers to how many bytes are skipped
+or sought. Running
+.BR dj (1)
+with a skip offset of 1 skips one byte into the input and reads from the second
+byte onwards. A programmer may think of a file as a zero-indexed array of
+bytes; in this analogy, the offset given is the index of the byte at which to
+start reading or writing.
+.\"
+.SH OPTIONS
+
+.IP \fB-i\fP\ \fIfile\fP
+Takes a file path as an argument and opens it for use as an input.
+.IP \fB-b\fP\ \fIblock_size\fP
+Takes a numeric argument as the size in bytes of the input buffer, the default
+being 1024.
+.IP \fB-s\fP
+Takes a numeric argument as the index of the byte at which reading will
+commence; \(lqskips\(rq that number of bytes. If the standard input is used,
+bytes read to this point are discarded.
+.IP \fB-o\fP
+Takes a file path as an argument and opens it for use as an output.
+.IP \fB-B\fP\ \fIblock_size\fP
+Takes a numeric argument as the size in bytes of the output buffer, the default
+being 1024. Note that this option only affects the size of output writes and not
+the amount of output data itself. See the CAVEATS section.
+.IP \fB-S\fP
+Takes a numeric argument as the index of the byte at which writing will
+commence; \(lqseeks\(rq that number of bytes. If the standard output is used,
+null characters are printed.
+.IP \fB-a\fP
+Accepts a single literal byte with which the input buffer is padded in the event
+of an incomplete read from the input file. If the option argument is empty, the
+null byte is used.
+.IP \fB-c\fP
+Specifies a number of blocks to read. The default is 0, in which case the input
+is read until a partial or empty read is made.
+.IP \fB-H\fP
+Prints diagnostic messages in a human-readable manner as described in the
+DIAGNOSTICS section.
+.IP \fB-n\fP
+Retries failed reads once before exiting.
+.\"
+.SH STANDARD INPUT
+
+The standard input shall be used as an input if no inputs are specified or if
+input file is \(lq-\(rq.
+.\"
+.SH STANDARD OUTPUT
+The standard output shall be used as an output if no inputs are specified or if
+the output file is \(lq-\(rq.
+.\"
+.SH EXAMPLES
+
+The following
+.BR sh (1p)
+line:
+
+.RS
+printf 'Hello, world!\(rsn' | dj -c 1 -b 7 -s 7 2>/dev/null
+.RE
+
+Produces the following output:
+
+.RS
+world!
+.RE
+
+The following
+.BR sh (1p)
+lines run sequentially:
+
+.RS
+tr '\(rs0' 0    </dev/zero | dj -c 1 -b 6 -o hello.txt
+
+tr '\(rs0' H    </dev/zero | dj -c 1 -b 1 -o hello.txt
+
+tr '\(rs0' e    </dev/zero | dj -c 1 -b 1 -o hello.txt -S 1
+
+tr '\(rs0' l    </dev/zero | dj -c 1 -b 2 -o hello.txt -S 2
+
+tr '\(rs0' o    </dev/zero | dj -c 1 -b 1 -o hello.txt -S 4
+
+tr '\(rs0' '\(rsn' </dev/zero | dj -c 1 -b 1 -o hello.txt -S 5
+
+dj -i hello.txt
+.RE
+
+Produce the following output:
+
+.RS
+Hello
+.RE
+
+It may be particularly illuminating to print the contents of the example
+.B hello.txt
+after each
+.BR dj (1)
+invocation.
+.\"
 .SH DIAGNOSTICS
 
-The
-.B -d
-option prints all information, user-specified or otherwise, before program
-execution.
-.PP
-When dj exits, by default statistics are printed for input and output to
-standard error in the following format:
-.PP
-.R {records read} {ASCII unit separator} {partial records read}
-.R {ASCII record separator} {records written} {ASCII unit separator}
-.R {partial records written} {ASCII group separator} {bytes read}
-.R {ASCII record separator} {bytes written} {ASCII file separator}
-.PP
-If the
-.B -H
-option is specified dj instead uses this following format:
-.PP
-.R {records read} '+' {partial records read} '>' {records written}
-.R '+' {partial records written} ';' {bytes read} '>' {bytes written}
-.R {ASCII line feed}
-.PP
-The
-.B -q
-option suppresses error messages which print when a read or write is partial or
-empty and when used twice suppresses diagnostic output entirely.
-.PP
-In non-recoverable errors that don't pertain to dj's read-write cycle, a
-diagnostic message is printed and dj exits with the appropriate sysexits(3)
-status.
+On a partial or empty read, a diagnostic message is printed. Then, the program
+exits unless the
+.B -n
+option is specified.
 
+By default, statistics are printed for input and output to the standard error in
+the following format:
+
+.RS
+{records read} {ASCII unit separator} {partial records read}
+{ASCII record separator} {records written} {ASCII unit separator}
+{partial records written} {ASCII group separator} {bytes read}
+{ASCII record separator} {bytes written} {ASCII file separator}
+.RE
+
+This format for diagnostic output is designed to be machine-parseable for
+convenience. For a more human-readable format, the
+.B -H
+option may be specified. In this event, the following format is used instead:
+
+.RS
+{records read} '+' {partial records read} '>' {records written}
+'+' {partial records written} ';' {bytes read} '>' {bytes written}
+{ASCII line feed}
+.RE
+
+In non-recoverable errors that don\(cqt pertain to the read-write cycle, a
+diagnostic message is printed and the program exits with the appropriate
+.BR sysexits.h (3)
+status.
+.\"
 .SH BUGS
 
 If
 .B -n
-is specified along with a specified count, actual byte output may be lower than
-expected (the product of the count multiplied by the input block size). If the
+is specified along with the
+.B -c
+option and a count, actual byte output is the product of the count and the input
+block size and therefore may be lower than expected. If the
 .B -a
-or
-.B -A
-options are used this could make data written nonsensical.
-.PP
-Many lowercase options have capitalized variants and vice-versa which can be
-confusing. Capitalized options tend to affect output or are more intense
-versions of lowercase options.
+option is specified, this could make written data nonsensical.
+.\"
+.SH CAVEATS
 
+Existing files are not truncated on ouput and are instead overwritten.
+
+Option variants that have lowercase and uppercase forms could be confused for
+each other. The former affects input and the latter affects output.
+
+The
+.B -B
+option could be mistaken for the count in bytes of data written to the output.
+This conception is intuitive but incorrect, as the
+.B -c
+option controls the number of blocks to read and the
+.B -b
+option sets the size of the blocks. The
+.B -B
+option is similar to the latter but sets the size of blocks to be written,
+regardless of the amount of data that will actually be written. In practice,
+this means the input buffer should be very large to make use of modern hardware
+input and output speeds.
+
+The skipped or sought bytes while processing irregular files, such as streams,
+are reported in the diagnostic output, because they were actually read or
+written. This is as opposed to bytes skipped while processing regular files,
+which are not reported.
+.\"
 .SH RATIONALE
 
-Dj was modeled after the dd utility specified in POSIX but adds additional
-features: typical option formatting, allowing seeks to be specified in bytes
-rather than in blocks, allowing arbitrary bytes as padding, and printing in a
-format that's easy to parse for machines. It also neglects character
-conversion, which may be dd's original intent but is irrelevant to its modern
-use.
-
+This program was based on the
+.BR dd (1p)
+utility as specified in POSIX. While character conversion may have been the
+original intent of
+.BR dd (1p),
+it is irrelevant to its modern use. Because of this, this program eschews
+character conversion and adds typical option formatting, allowing seeks to be
+specified in bytes rather than in blocks, allowing arbitrary bytes as padding,
+and printing in a format that\(cqs easy for machines to parse.
+.\"
 .SH COPYRIGHT
 
-Copyright (C) 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
+Copyright \(co 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-
+.\"
 .SH SEE ALSO
-
-dd(1)
+.BR dd (1p)
+.BR lseek (3p)
+.BR mm (1)

docs/false.1

@@ -1,35 +1,35 @@
 .\" Copyright (c) 2022, 2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-
-.TH FALSE 1
-
+.\"
+.TH FALSE 1 2024-06-06 "Harakit X.X.X"
 .SH NAME
-
 false \(en do nothing, unsuccessfully
-
+.\"
 .SH DESCRIPTION
 
-False does nothing regardless of operands or standard input.
-False will always return an exit code of 1.
-
+Do nothing regardless of operands or standard input. An exit code of 1 will
+always be returned.
+.\"
 .SH RATIONALE
 
-False exists for the construction of control flow and loops based on a failure.
-
-False functions as described in POSIX.1-2017.
-
+In POSIX.1-2017,
+.BR false (1p)
+exists for the construction of control flow and loops based on a failure. This
+implementation functions as described in that standard.
+.\"
 .SH AUTHOR
 
-Written by Emma Tebibyte <emma@tebibyte.media>.
-
+Written by Emma Tebibyte
+.MT emma@tebibyte.media
+.ME .
+.\"
 .SH COPYRIGHT
 
 This work is marked with CC0 1.0. To see a copy of this license, visit
 <http://creativecommons.org/publicdomain/zero/1.0>.
-
+.\"
 .SH SEE ALSO
-
-true(1p)
+.BR true (1p)

docs/fop.1

@@ -0,0 +1,62 @@
+.\" Copyright (c) 2024 DTB <trinity@trinity.moe>
+.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+.\"
+.\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
+.\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
+.\"
+.TH FOP 1 2024-06-17 "Harakit X.X.X"
+.SH NAME
+fop \(en field operator
+.\"
+.SH SYNOPSIS
+
+fop
+.RB ( -d )
+.RB [ delimiter ]
+.RB index 
+.RB program...
+.\"
+.SH DESCRIPTION
+
+Performs operations on specified fields in data read from the standard input.
+.\"
+.SH OPTIONS
+
+.IP \fB-d\fP\ \fIdelimiter\fP
+Sets a delimiter by which the input data will be split into fields. The default
+is an ASCII record separator.
+.\"
+.SH CAVEATS
+
+Field indices are zero-indexed, which may be unexpected behavior for some users.
+.\"
+.SH RATIONALE
+
+With the assumption that tools will output data separated with ASCII field
+separators, there is a need for the ability to modify select fields in this data
+easily and quickly.
+
+The idea for this utility originated in the fact that the GNU
+.BR ls (1)
+utility contains a
+.B -h
+option which enables human-readable units in file size outputs. This
+functionality was broken out into
+.BR hru (1),
+but there was no easy way to modify the field in the ouput of
+.BR ls (1p)
+without creating a new tool.
+.\"
+.SH AUTHOR
+
+Written by Emma Tebibyte
+.MT emma@tebibyte.media
+.ME .
+.\"
+.SH COPYRIGHT
+
+Copyright \(co 2024 Emma Tebibyte. License AGPLv3+: GNU AGPL version 3 or later
+<https://gnu.org/licenses/agpl.html>.
+.\"
+.SH SEE ALSO
+.BR sed (1p)

docs/hru.1

@@ -0,0 +1,69 @@
+.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+.\"
+.\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
+.\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
+.\"
+.TH HRU 1 2024-06-17 "Harakit X.X.X"
+.SH NAME
+hru \(en human readable units
+.\"
+.SH SYNOPSIS
+
+hru
+.\"
+.SH DESCRIPTION
+
+Convert counts to higher units.
+
+Byte counts will be read in the form of whole numbers from the standard input
+and be written to the standard output the same number converted to a higher unit
+of data as defined by the \fIInternational System of Units\fP.
+
+The program will convert the byte count to the highest unit possible where the
+value is greater than one.
+.\"
+.SH DIAGNOSTICS
+
+If encountering non-integer characters in the standard input, the program will
+exit with the appropriate error code as defined by
+.BR sysexits.h (3)
+and print an error message.
+.\"
+.SH RATIONALE
+
+The GNU project\(cqs
+.BR ls (1)
+implementation contains a human-readable option (\fB-h\fP) that, when specified,
+makes the tool print size information in a format more immediately
+readable. This functionality is useful not only in this context, so the decision
+was made to split it into a new tool. The original functionality from GNU\(cqs
+.BR ls (1)
+can be emulated with
+.BR fop (1)
+combined with this program.
+.\"
+.SH STANDARDS
+
+The standard unit prefixes as specified by the
+.I Bureau International des Poids et Mesures
+.RI ( BIPM )
+in the ninth edition of
+.I The International System of Units
+.RI ( SI )
+are utilized for the ouput of conversions.
+.\"
+.SH AUTHOR
+
+Written by Emma Tebibyte
+.MT emma@tebibyte.media
+.ME .
+.\"
+.SH COPYRIGHT
+
+Copyright \(co 2024 Emma Tebibyte. License AGPLv3+: GNU AGPL version 3 or later
+<https://gnu.org/licenses/agpl.html>.
+.\"
+.SH SEE ALSO
+GNU
+.BR ls (1),
+.I The International System of Units (SI) 9th Edition

docs/intcmp.1

@@ -1,78 +1,103 @@
 .\" Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-
-.TH intcmp 1
-
+.\"
+.TH INTCMP 1 2024-06-06 "Harakit X.X.X"
 .SH NAME
-
 intcmp \(en compare integers
-
+.\"
 .SH SYNOPSIS
 
 intcmp
-.RB ( -eghl )
-.RB [ integer ]
-.RB [ integer... ]
-
+.RB [ -egl ]\ integer\ integer...
 .SH DESCRIPTION
+Compare integers to each other.
+.\"
+.SH OPTIONS
 
-Intcmp compares integers.
-
-.SH USAGE
-
-The -e option permits given integers to be equal to each other. If combined
-with -g or -l, only adjacent integers in the argument sequence can be equal.
-.PP
-The -g option permits a given integer to be greater than the following integer.
-.PP
-The -l option permits a given integer to be less than the following integer.
-.PP
-It may help to think of the -e, -g, and -l options as equivalent to the
-infix algebraic “=”, “>”, and “<” operators respectively, with each option
-putting its symbol between every given integer. For example,
-.R intcmp -l 1 2 3
-is equivalent to evaluating "1 < 2 < 3".
+.IP \fB-e\fP
+Permits given integers to be equal to each other.
+.IP \fB-g\fP
+Permits a given integer to be greater than the following integer.
+.IP \fB-l\fP
+Permits a given integer to be less than the following integer.
+.\"
+.SH EXAMPLES
 
+It may help to think of the
+.BR -e ,
+.BR -g ,
+and
+.B -l
+options as equivalent to the infix algebraic \(lq=\(rq, \(lq>\(rq, and \(lq<\(rq
+operators respectively, with each option putting its symbol between every given
+integer. The following example is equivalent to evaluating \(lq1 < 2 < 3\(rq:
+\"
+.RS
+intcmp -l 1 2 3
+.RE
+.\"
 .SH DIAGNOSTICS
 
-Intcmp exits 0 for a valid expression and 1 for an invalid expression.
-.PP
-Intcmp prints a debug message and exits with the appropriate sysexits(3) error
-code in the event of an error.
+The program will exit with a successfully for a valid expression and with an
+error code of 1 for an invalid expression.
 
+In the event of an error, a debug message will be printed and the program will
+exit with the appropriate
+.BR sysexits.h (3)
+error code.
+.\"
 .SH BUGS
 
-There are multiple ways to express compound comparisons; “less than or equal
-to” can be -le or -el, for example.
-.PP
-The inequality comparison is -gl or -lg for “less than or greater than”; this
-is elegant but unintuitive.
-.PP
--egl, "equal to or less than or greater than", exits 0 no matter what for valid
-program usage and may be abused to function as an integer validator.
-Use str(1) instead.
+.BR -egl ,
+\(lqequal to or less than or greater than\(rq, always exits successfully for
+valid program usage and may be abused to function as an integer validator. Use
+.BR str (1)
+instead.
+.\"
+.SH CAVEATS
 
+There are multiple ways to express compound comparisons; \(lqless than or equal
+to\(rq can be
+.B -le
+or
+.BR -el ,
+for example.
+
+The inequality comparison is
+.B -gl
+.B or
+.B -lg
+for \(lqless than or greater than\(rq;
+this is elegant but unintuitive.
+.\"
 .SH RATIONALE
 
 The traditional tool for integer comparisons in POSIX and other Unix shells has
-been test(1). This tool also handles string comparisons and file scrutiny.
-These parts of its functionality have been broken out into multiple utilities.
-
-Strcmp’s functionality may be performed on a POSIX-compliant system with
-test(1p).
+been
+.BR test (1).
+This tool also handles string comparisons and file scrutiny. These parts of its
+functionality have been broken out into multiple utilities.
 
+This program\(cqs functionality may be performed on a POSIX-compliant system
+with
+.BR test (1p).
+.\"
 .SH AUTHOR
 
-Written by DTB <trinity@trinity.moe>.
-
+Written by DTB
+.MT trinity@trinity.moe
+.ME .
+.\"
 .SH COPYRIGHT
-
-Copyright © 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
+.\"
+Copyright \(co 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/gpl.html>.
-
+.\"
 .SH SEE ALSO
-
-strcmp(1), scrut(1), str(1), test(1p)
+.BR scrut (1),
+.BR strcmp (1),
+.BR str (1),
+.BR test (1p)

docs/mm.1

@@ -0,0 +1,73 @@
+.\" Copyright (c) 2024 DTB <trinity@trinity.moe>
+.\"
+.\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
+.\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
+.\"
+.TH MM 1 2024-07-14 "Harakit X.X.X"
+.SH NAME
+mm \(en middleman
+.\"
+.SH SYNOPSIS
+
+mm
+.RB [ -aetu ]
+.RB [ -i\ input ]
+.RB [ -o\ output ]
+.\"
+.SH DESCRIPTION
+
+Catenate input files and write them to the start of each output file or stream.
+.\"
+.SH OPTIONS
+
+.IP \fB-a\fP
+Opens outputs for appending rather than updating.
+.IP \fB-e\fP
+Use the standard error as an output.
+.IP \fB-t\fP
+Causes outputs to be overwritten instead of being truncated.
+.IP \fB-u\fP
+Ensures neither input or output will be buffered.
+.IP \fB-i\fP\ \fIinput\fP
+Opens a path as an input. If one or more of the input files is \(lq-\(rq or if
+no inputs are specified, the standard input shall be used. If specified as the
+last option and if there are trailing arguments to the program, they shall be
+appended to the list of files to use as inputs.
+.IP \fB-o\fP\ \fIoutput\fP
+Opens a path as an output. If one or more of the output files is \(lq-\(rq or if
+no outputs are specified and the
+.B -e
+option is not specified, the standard output shall be used. If specified as the
+last option and if there are trailing arguments to the program, they shall be
+appended to the list of files to use as outputs.
+.\"
+.SH DIAGNOSTICS
+
+If an output cannot be written to, an error occurs; however, exiting will be 
+deferred until writing to any other specified outputs completes.
+
+When an error is encountered, a diagnostic message is printed and the program
+exits with the appropriate
+.BR sysexits.h (3)
+status.
+.\"
+.SH RATIONALE
+
+The
+.BR cat (1p)
+and
+.BR tee (1p)
+programs specified in POSIX together provide similar functionality. The
+separation of the two sets of functionality into separate APIs seemed
+unncessary.
+.\"
+.SH COPYRIGHT
+
+Copyright \(co 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
+<https://gnu.org/licenses/agpl.html>.
+.\"
+.SH SEE ALSO
+.BR cat (1p),
+.BR dd (1),
+.BR dj (1),
+.BR tee (1p)

docs/npc.1

@@ -1,68 +1,74 @@
 .\" Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-
-.TH npc 1
-
+.\"
+.TH NPC 1 2024-06-17 "Harakit X.X.X"
 .SH NAME
-
 npc \(en show non-printing characters
-
+.\"
 .SH SYNOPSIS
 
 npc
-.RB ( -eht )
-
+.RB [ -et ]
+.\"
 .SH DESCRIPTION
 
-Npc reads from standard input and writes to standard output, replacing non-
-printing characters with printable equivalents. Control characters print as a
-carat ('^') followed by the character '@' through '_' corresponding to the
-character replaced (e.g. control-X becomes "^X"). The delete character (0x7F)
-becomes "^?". Characters with the high bit set (>127) are printed as "M-"
+Print normally non-printing characters.
+
+The program reads from standard input and writes to standard output, replacing
+non-printing characters with printable equivalents. Control characters print as
+a carat ('^') followed by the character '@' through '_' corresponding to the
+character replaced (e.g. control-X becomes '^X'). The delete character (0x7F)
+becomes '^?'. Characters with the high bit set (>127) are printed as 'M-'
 followed by the graphical representation for the same character without the
 high bit set.
-.PP
-The
-.B -e
-option prints a currency sign ('$') before each line ending.
-.PP
-The
-.B -t
-option prints tab characters as "^I" rather than a literal horizontal tab.
+.\"
+.SH OPTIONS
 
+.IP \fB-e\fP
+Prints a dollar sign ('$') before each newline.
+.IP \fB-t\fP
+Prints tab characters as '^I' rather than a literal horizontal tab.
+.\"
 .SH DIAGNOSTICS
 
-Npc prints a debug message and exits with the appropriate sysexits(3) error
-code in the event of an error, otherwise it exits successfully.
-
+In the event of an error, a debug message will be printed and the program will
+exit with the appropriate
+.BR sysexits.h (3)
+error code.
+.\"
 .SH BUGS
 
-Npc operates in single-byte chunks regardless of intended encoding.
-
+The program operates in single-byte chunks regardless of intended encoding.
+.\"
 .SH RATIONALE
 
 POSIX currently lacks a way to display non-printing characters in the terminal
-using a standard tool. A popular extension to cat(1p), the -v option, is the
-bandage solution GNU and other software suites use.
-
-This functionality should be a separate tool because its usefulness extends
-beyond that of cat(1p).
+using a standard tool. A popular extension to
+.BR cat (1p),
+the
+.B -v
+option, is the bandage solution GNU and other software suites use.
 
+This functionality is included in a separate tool because its usefulness extends
+beyond that of
+.BR cat (1p).
+.\"
 .SH AUTHOR
 
-Written by DTB <trinity@trinity.moe>.
-
+Written by DTB
+.MT trinity@trinity.moe
+.ME .
+.\"
 .SH COPYRIGHT
 
 Copyright © 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-
+.\"
 .SH SEE ALSO
-
-cat(1p), cat-v(1)
-
+.BR cat (1p),
+.BR cat-v (1),
 .I UNIX Style, or cat -v Considered Harmful
 by Rob Pike

docs/peek.1

@@ -0,0 +1,111 @@
+.\" Copyright (c) 2023-2024 DTB <trinity@trinity.moe>
+.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+.\"
+.\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
+.\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
+.\"
+.TH PEEK 1 2024-08-14 "Harakit X.X.X"
+.SH NAME
+peek \(en read from the standard input, furtively
+.\"
+.SH SYNOPSIS
+
+peek
+.RB [ -i ]
+.\"
+.SH DESCRIPTION
+
+Read input from the standard input with terminal echo disabled.
+.\"
+.SH OPTIONS
+
+.IP \fB-i\fP
+Allows input to come from sources other than terminals (pipes).
+.\"
+.SH DIAGNOSTICS
+
+In the event of an error, a debug message will be printed and the program will
+exit with the appropriate
+.BR sysexits.h (3)
+error code.
+
+In order to ensure the user\(cqs terminal is still usable after premature
+termination, the program attempts to handle the SIGINT signal; if it cannot,
+an error message is printed and execution continues. If the program is
+interrupted, it exits unsuccessfully without an error message.
+.\"
+.SH RATIONALE
+
+This tool was originally written to accept passwords in shell scripts as an
+extremely simple alternative to the GNU Privacy Guard project\(cqs
+.BR pinentry (1)
+utility.
+
+Accepting input without showing what is being typed is useful when keying in
+secrets in public settings or in places where surveillance cameras are
+installed.
+.\"
+.SH CAVEATS
+
+This program does nothing to prevent others from seeing the key presses input to
+a keyboard. It also does not protect against the sound of typing being analyzed
+to determine what was input without needing to see screen or keyboard.
+
+Accepting secrets in shell scripts is probably not advisable.
+
+On systems that support it, the
+.BR ioctl (2)
+command TIOCSTI can be used to insert characters into the standard input. This
+doesn't allow snooping but can be used for general mischief.
+.\"
+.SH EXAMPLES
+
+This is an
+.BR sh (1p)
+command line that hashes a given password. It uses
+.BR head (1p)
+to only accept one line of input,
+.BR xargs (1p)
+and
+.BR printf (1p)
+to strip the trailing newline,
+.BR htpasswd (1) 
+from Apache\(cqs utilities to hash the input with the bcrypt algorithm, and
+.BR cut (1p)
+to print only the resulting hash:
+
+.RS
+$ peek | head -n 1 | xargs printf '%s' | htpasswd -nBi _ | cut -d : -f 2
+.RE
+
+This is an
+.BR sh (1p)
+command line that allows a user to write blindly into a text file but displaying
+only written lines. Some writers have the habit of prematurely revising their 
+work and use tools with functionality similar to this to prevent it. 
+It uses
+.BR mm (1)
+to pipe the output of the program to both the standard error and the regular
+file writing.txt:
+
+.RS
+$ echo Input ^D to quit. && peek | mm -eo - >writing.txt
+.RE
+.\"
+.SH AUTHOR
+
+Written by DTB
+.MT trinity@trinity.moe
+.ME .
+.\"
+.SH COPYRIGHT
+
+Copyright \(co 2023-2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
+<https://gnu.org/licenses/gpl.html>.
+.\"
+.SH SEE ALSO
+.BR ioctl (2),
+.BR ioctl_tty (2),
+.BR read (1p),
+.BR sh (1p),
+.BR stty (1p)

docs/rpn.1

@@ -3,68 +3,84 @@
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-
-.TH rpn 1
-
+.\"
+.TH RPN 1 2024-06-17 "Harakit X.X.X"
 .SH NAME
-
 rpn \(en reverse polish notation evaluation
-
+.\"
 .SH SYNOPSIS
 
 rpn
-.RB [numbers...]\ [operators...]
-
+.RB [ numbers... ]
+.RB [ operators... ]
+.\"
 .SH DESCRIPTION
 
-Rpn evaluates reverse polish notation expressions either read from the standard
-input or parsed from provided arguments. See the STANDARD INPUT section.
+Evaluate reverse polish notation.
 
-Upon evaluation, rpn will print the resulting number on the stack to the
-standard output. Any further specified numbers will be placed at the end of the
+The program evaluates reverse polish notation expressions read either from the
+standard input or parsed from provided arguments. See the STANDARD INPUT
+section.
+
+Upon evaluation, the resulting number on the stack will be printed to the
+standard output. Any further numbers specified will be placed at the end of the
 stack.
 
-For information on for reverse polish notation syntax, see rpn(7).
-
+For information on for reverse polish notation syntax, see
+.BR rpn (7).
+.\"
 .SH STANDARD INPUT
 
-If arguments are passed to rpn, it interprets them as an expression to be
-evaluated. Otherwise, it reads whitespace-delimited numbers and operations from
+If arguments are specified, they are interpreted as an expression to be
+evaluated. Otherwise, whitespace-delimited numbers and operations are read from
 the standard input.
-
+.\"
 .SH DIAGNOSTICS
 
-If encountering a syntax error, rpn will exit with the appropriate error code
-as defined by sysexits.h(3) and print an error message.
-
+In the event of an error, a debug message will be printed and the program will
+exit with the appropriate
+.BR sysexits.h (3)
+error code; however, in the event of a syntax error, the program will print an
+error message and continue accepting input.
+.\"
 .SH CAVEATS
 
 Due to precision constraints and the way floats are represented in accordance
-with the IEEE Standard for Floating Point Arithmetic (IEEE 754), floating-point
-arithmetic has rounding errors. This is somewhat curbed by using the
-machine epsilon as provided by the Rust standard library to which to round
-numbers. Because of this, variation is expected in the number of decimal places 
-rpn can handle based on the platform and hardware of any given machine.
-
+with the
+.I IEEE Standard for Floating Point Arithmetic
+(\fIIEEE 754\fP), floating-point arithmetic has rounding errors. This is
+somewhat curbed by using the machine epsilon as provided by the Rust standard
+library to which numbers are rounded. Because of this, variation is expected in
+the number of decimal places the program can handle based on the platform and
+hardware of any given machine.
+.\"
 .SH RATIONALE
 
-An infix notation calculation utility, bc(1p), is included in the POSIX
-standard, but does not accept expressions as arguments; in scripts, any
-predefined, non-interactive input must be piped into the program. A dc(1)
-pre-dates the standardized bc(1p), the latter originally being a preprocessor
-for the former, and was included in UNIX v2 onward. While it implements reverse
-polish notation, it still suffers from being unable to accept an expression as
-an argument.
-
+An infix notation calculation utility,
+.BR bc (1p),
+is included in the POSIX standard, but does not accept expressions as arguments;
+in scripts, any predefined, non-interactive input must be piped into the
+program. A
+.BR dc (1)
+pre-dates the standardized
+.BR bc (1p),
+the latter originally being a preprocessor for the former, and was included in
+Second Edition UNIX and onward. While it implements reverse polish notation, it
+still suffers from being unable to accept an expression as an argument.
+.\"
 .SH AUTHOR
 
-Written by Emma Tebibyte <emma@tebibyte.media>.
-
+Written by Emma Tebibyte
+.MT emma@tebibyte.media
+.ME .
+.\"
 .SH COPYRIGHT
 
 Copyright (c) 2024 Emma Tebibyte. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/agpl.html>.
-
+.\"
 .SH SEE ALSO
-
-bc(1p), dc(1), rpn(7), IEEE 754
+.BR bc (1p),
+.BR dc (1),
+.BR rpn (7),
+.I IEEE 754

docs/scrut.1

@@ -0,0 +1,86 @@
+.\" Copyright (c) 2024 DTB <trinity@trinity.moe>
+.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+.\"
+.\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
+.\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
+.\"
+.TH SCRUT 1 2024-06-06 "Harakit X.X.X"
+.SH NAME
+scrut \(en scrutinize file properties
+.SH SYNOPSIS
+
+scrut
+.RB [ -LSbcdefgkprsuwx ]
+.B file...
+.\"
+.SH DESCRIPTION
+
+Determine if files comply with requirements. If the given files comply with the
+specified requirements, the program will exit successfully. Otherwise, it exits
+unsuccessfully.
+.\"
+.SH OPTIONS
+
+.IP \fB-L\fB
+Requires the given files to exist and be symbolic links.
+.IP \fB-S\fP
+Requires the given files to exist and be sockets.
+.IP \fB-b\fP
+Requires the given files to exist and be block special files.
+.IP \fB-c\fP
+Requires the given files to exist and be character special files.
+.IP \fB-d\fP
+Requires the given files to exist and be directories.
+.IP \fB-e\fP
+Requires the given files to exist, and is redundant to any other option.
+.IP \fB-f\fP
+Requires the given files to exist and be regular files.
+.IP \fB-g\fP
+Requires the given files to exist and have their set group ID flags set.
+.IP \fB-k\fP
+Requires the given files to exist and have their sticky bit set.
+.IP \fB-p\fP
+Requires the given files to exist and be named pipes.
+.IP \fB-r\fP
+Requires the given files to exist and be readable.
+.IP \fB-u\fP
+Requires the given files to exist and have their set user ID flags set.
+.IP \fB-w\fP
+Requires the given files to exist and be writable.
+.IP \fB-x\fP
+Requires the given files to exist and be executable.
+.\"
+.SH DIAGNOSTICS
+
+When invoked incorrectly, a debug message will be printed and the program will
+exit with the appropriate
+.BR sysexits.h (3)
+error code.
+.\"
+.SH RATIONALE 
+
+The 
+.BR test (1p)
+utility contains functionality that was broken out into separate programs. Thus,
+the scope of this program is narrower than it. Notably, the
+.B -h
+option is now invalid and therefore shows usage information instead of being an
+alias to the modern
+.B -L
+option.
+.\"
+.SH AUTHOR
+
+Written by DTB
+.MT trinity@trinity.moe
+.ME .
+.\"
+.SH COPYRIGHT
+
+Copyright \(co 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
+<https://gnu.org/licenses/agpl.html>.
+.\"
+.SH SEE ALSO
+.BR access (3p),
+.BR lstat (3p),
+.BR test (1p)

docs/str.1

@@ -1,58 +1,59 @@
 .\" Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-
-.TH STR 1
-
+.\"
+.TH STR 1 2024-06-17 "Harakit X.X.X"
 .SH NAME
-
-str \(en test the character types of string arguments
-
+str \(en test string arguments
+.\"
 .SH SYNOPSIS
 
 str
-.RB [ type ]
-.RB [ string... ]
-
+.B type string...
+.\"
 .SH DESCRIPTION
 
-Str tests each character in an arbitrary quantity of string arguments against
-the function of the same name within ctype(3).
+Test the character types of string arguments.
 
+The tests in this program are equivalent to the functions with the same names in
+.BR ctype.h (0p)
+and are the methods by which string arguments are tested.
+.\"
 .SH DIAGNOSTICS
 
-Str exits successfully if all tests pass and unsuccessfully if a test failed.
-.PP
-Str will exit unsuccessfully if a string is empty, as none of its contents
-passed the test.
-.PP
-Str will print a message to standard error and exit unsuccessfully if used
-improperly.
+If all tests pass, the program will exit successfully. If any of the tests fail,
+the program will exit unsuccessfully with an error code of 1.
 
-.SH DEPRECATED FEATURES
+When invoked incorrectly, a debug message will be printed and the program will
+exit with the appropriate
+.BR sysexits.h (3)
+error code.
+.\"
+.SH CAVEATS
 
-Str used to have an "isvalue" type as an extension to ctype(3). This was
-removed in favor of using strcmp(1) to compare strings against the empty string
-('').
+None of an empty string\(cqs contents pass any of the tests, so the program will
+exit unsuccessfully if one is specified.
 
-.SH BUGS
-
-There's no way of knowing which argument failed the test without re-testing
+There\(cqs no way of knowing which argument failed the test without re-testing
 arguments individually.
-.PP
-If a character in a string isn't valid ASCII str will exit unsuccessfully.
 
+If a character in a string isn\(cqt valid ASCII, the program will exit
+unsuccessfully.
+.\"
 .SH AUTHOR
 
-Written by DTB <trinity@trinity.moe>.
-
+Written by DTB
+.MT trinity@trinity.moe
+.ME .
+.\"
 .SH COPYRIGHT
 
-Copyright © 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
+Copyright \(co 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/gpl.html>.
-
+.\"
 .SH SEE ALSO
-
-ctype(3p), strcmp(1), ascii(7)
+.BR ctype (3p),
+.BR strcmp(1),
+.BR ascii(7)

docs/strcmp.1

@@ -1,62 +1,75 @@
 .\" Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-
-.TH STRCMP 1
-
+.\"
+.TH STRCMP 1 2024-07-15 "Harakit X.X.X"
 .SH NAME
-
 strcmp \(en compare strings
-
+.\"
 .SH SYNOPSIS
 
 strcmp
-.RM [ string ]
-.RB [ strings... ]
-
+.B string string...
+.\"
 .SH DESCRIPTION
 
-Strcmp checks whether the given strings are the same.
-Strcmp exits successfully if the strings are identical. Otherwise, strcmp exits
-with the value 1 if an earlier string has a greater byte value than a later
-string (e.g.
-.R strcmp b a
-)
-and 255 if an earlier string has a lesser byte value (e.g.
-.R strcmp a b
-).
-
+Check whether string arguments are the same.
+.\"
 .SH DIAGNOSTICS
 
-Strcmp will print an error message and exit unsuccessfully with a status
-described in sysexits(3) if used incorrectly (given less than two operands).
+The program will exit successfully if the strings are identical. Otherwise, it
+will exit with an error code less than 128 if a string passed has a lesser byte
+value than one of the prior strings:
 
-.SH UNICODE
+.RS
+strcmp b a
+.RE
 
-Strcmp will exit unsuccessfully if the given strings are not identical;
-Unicode strings may need to be normalized if the intent is to check visual
-similarity and not byte similarity.
+or with an error code greater than 128 if it has a greater byte value than one
+of the prior strings:
 
+.RS
+strcmp a b
+.RE
+
+When invoked incorrectly, a debug message will be printed and the program will
+exit with the appropriate
+.BR sysexits.h (3)
+error code.
+.\"
+.SH CAVEATS
+
+The program will exit unsuccessfully if the given strings are not identical;
+therefore, Unicode strings may need to be normalized if the intent is to check
+visual similarity and not byte similarity.
+.\"
 .SH RATIONALE
 
 The traditional tool for string comparisons in POSIX and other Unix shells has
-been test(1). This tool also handles integer comparisons and file scrutiny.
-These parts of its functionality have been broken out into multiple utilities.
-
-Strcmp’s functionality may be performed on a POSIX-compliant system with
-test(1p).
+been
+.BR test (1).
+This tool also handles integer comparisons and file scrutiny. These parts of its
+functionality have been broken out into multiple utilities.
 
+This program\(cqs functionality may be performed on a POSIX-compliant system
+with
+.BR test (1p).
+.\"
 .SH AUTHOR
 
-Written by DTB <trinity@trinity.moe>.
-
+Written by DTB 
+.MT trinity@trinity.moe
+.ME .
+.\"
 .SH COPYRIGHT
 
-Copyright © 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
+Copyright \(co 2023 DTB. License AGPLv3+: GNU AGPL version 3 or later
 <https://gnu.org/licenses/gpl.html>.
-
+.\"
 .SH SEE ALSO
-
-strcmp(3), intcmp(1), scrut(1), test(1p)
+.BR strcmp (3),
+.BR intcmp (1),
+.BR scrut (1),
+.BR test (1p)

docs/swab.1

@@ -0,0 +1,75 @@
+.\" Copyright (c) 2024 DTB <trinity@trinity.moe>
+.\" Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+.\"
+.\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
+.\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
+.\"
+.TH SWAB 1 2024-06-17 "Harakit X.X.X"
+.SH NAME
+swab \(en swap bytes
+.\"
+.SH SYNOPSIS
+
+swab
+.RB [ -w\ word_size ]
+.\"
+.SH DESCRIPTION
+
+Swap the latter and former halves of a block of bytes.
+.\"
+.SH OPTIONS
+
+.IP \fB-w\fP\ \fIword_size\fP
+Configures the word size; that is, the size in bytes of the block size on which
+to operate. The default word size is 2. The word size must be cleanly divisible
+by 2, otherwise the block of bytes being processed can\(cqt be halved.
+.\"
+.SH EXAMPLES
+
+The following
+.BR sh (1p)
+line:
+
+.RS
+printf 'hello world!\(rsn' | swab
+.RE
+.\" If you change this, make sure to change it in tests/bonsai/swab.mk too.
+
+Produces the following output:
+
+.RS
+ehll oowlr!d
+.RE
+.\"
+.SH DIAGNOSTICS
+
+In the event of an error, a debug message will be printed and the program will
+exit with the appropriate
+.BR sysexits.h (3)
+error code.
+.\"
+.SH RATIONALE
+
+This program was modeled and named after the
+.B conv=swab
+functionality specified
+in the
+.BR dd (1p)
+utility. It additionally allows the word size to be configured.
+
+This functionality is useful for fixing the endianness of binary files produced
+on other machines.
+.\"
+.SH AUTHOR
+
+Written by DTB
+.MT trinity@trinity.moe
+.ME .
+.\"
+.SH COPYRIGHT
+
+Copyright \(co 2024 DTB. License AGPLv3+: GNU AGPL version 3 or later
+<https://gnu.org/licenses/agpl.html>.
+.\"
+.SH SEE ALSO
+.BR dd (1p)

docs/true.1

@@ -1,35 +1,36 @@
 .\" Copyright (c) 2022, 2024 DTB <trinity@trinity.moe>
-.\" Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+.\" Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
 .\"
 .\" This work is licensed under CC BY-SA 4.0. To see a copy of this license,
 .\" visit <http://creativecommons.org/licenses/by-sa/4.0/>.
-
-.TH TRUE 1
-
+.\"
+.TH TRUE 1 2024-06-06 "Harakit X.X.X"
 .SH NAME
-
 true \(en do nothing, successfully
-
+.\"
 .SH DESCRIPTION
 
-True does nothing regardless of operands or standard input.
-True will always return an exit code of 0.
-
+Do nothing regardless of operands or standard input. An exit code of 0 will
+always be returned.
+.\"
 .SH RATIONALE
 
-True exists for the construction of control flow and loops based on a success.
-
-True functions as described in POSIX.1-2017.
-
+In \fIPOSIX.1-2017\fP,
+.BR true (1p)
+exists for the construction of control flow and loops based on a success. This
+implementation functions as described in that standard.
+.\"
 .SH AUTHOR
 
-Written by Emma Tebibyte <emma@tebibyte.media>.
-
+Written by Emma Tebibyte
+.MT emma@tebibyte.media
+.ME .
+.\"
 .SH COPYRIGHT
 
 This work is marked with CC0 1.0. To see a copy of this license, visit
 <http://creativecommons.org/publicdomain/zero/1.0>.
-
+.\"
 .SH SEE ALSO
-
-false(1p)
+.BR false (1p),
+.BR true (1p)

include/FreeBSD.mk

@@ -0,0 +1,6 @@
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.

include/OpenBSD.mk

@@ -0,0 +1,13 @@
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+OSLIB = build/o/libopenbsd.rlib
+RUSTFLAGS += --extern openbsd=$(OSLIB)
+
+$(OSLIB): src/libopenbsd.rs
+	$(RUSTC) $(RUSTFLAGS) --crate-type=lib --crate-name=openbsd \
+		-o $@ src/libopenbsd.rs

src/dj.c

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2024 DTB <trinity@trinity.moe>
+ * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
  * SPDX-License-Identifier: AGPL-3.0-or-later
  *
  * This program is free software: you can redistribute it and/or modify it under
@@ -16,437 +17,422 @@
  * along with this program. If not, see https://www.gnu.org/licenses/.
  */
 
-#include <ctype.h> /* isupper(3), tolower(3) */
+#include <assert.h> /* assert(3) */
 #include <errno.h> /* errno */
 #include <fcntl.h> /* open(2) */
+#include <stdbool.h> /* bool */
 #include <stdio.h> /* fprintf(3), stderr */
-#include <stdlib.h> /* free(3), malloc(3), strtol(3), size_t */
+#include <stdlib.h> /* malloc(3), strtol(3), size_t */
 #include <string.h> /* memcpy(3), memmove(3), memset(3) */
-#include <sysexits.h> /* EX_OK, EX_USAGE */
+#include <sysexits.h> /* EX_OK, EX_OSERR, EX_USAGE */
 #include <unistd.h> /* close(2), getopt(3), lseek(2), read(2), write(2),
-                     * optarg, optind, STDIN_FILENO, STDOUT_FILENO */
-extern int errno;
+                     * pledge(2), unveil(2), optarg, optind, STDIN_FILENO,
+					 * STDOUT_FILENO */
+#include <sys/stat.h> /* S_IRGRP, S_IROTH, S_IRUSR, S_IWGRP, S_IWOTH, S_IWUSR */
+
+char *program_name = "dj";
 
 /* dj uses two structures that respectively correspond to the reading and
  * writing ends of its jockeyed "pipe". User-configurable members are noted
  * with their relevant options. */
-struct Io{
-	int bs;			/* buffer size (-bB) */
+struct Io {
+	char *buf;      /* buffer */
+	char *fn;       /* file name (-io) */
+	size_t bs;    	/* buffer size (-bB) */
 	size_t bufuse;	/* buffer usage */
-	char *buf;		/* buffer */
-	int bytes;		/* bytes processed */
-	int fd;			/* file descriptor */
-	int fl;			/* file opening flags */
-	char *fn;		/* file name (may be stdin_name or stdout_name) (-io) */
-	int prec;		/* partial records processed */
-	int rec;		/* records processed */
-	long seek;		/* bytes to seek/skip (will be 0 after skippage) (-sS) */
-} ep[2]; /* "engineered pipe"; also "extended play", for the deejay */
+	size_t bytes; 	/* bytes processed */
+	size_t prec;  	/* partial records processed */
+	size_t rec;   	/* records processed */
+	long seek;  	/* remaining bytes to seek/skip (-sS) */
+	int error;  	/* errno */
+	int fd;         /* file descriptor */
+	int fl;         /* file opening flags */
+};
 
-/* Additionally, the following global variables are used to store user options.
- */
-
-/* (-a)  */ static int align; /* Only the lower 8b are used but align is
-                               * negative if no alignment is being done. */
-
-/* (-c)  */ static int count; /* 0 if dj(1) runs until no more reads are
-                               * possible. */
-
-/* ASCII field separator delimited statistics */
-            static char *fmt_asv   = "%d\037%d\036%d\037%d\035%d\036%d\034";
-/* human-readable statistics */
-            static char *fmt_human = "%d+%d > %d+%d; %d > %d\n";
-/* pointer to chosen formatting */
-/* (-H)  */ static char *fmt_output; /* fmt_asv (default) or fmt_human (-H) */
-
-/* (-dq) */ static char debug;       /*
- *  -d  increments             dj -qq | 0 - no diagnostic output whatsoever
- *   -q decrements             dj -q  | 1 - typical output without
- *                                    |     notifications on partial reads or
- *                                    |     writes
- *                             dj     | 2 - typical output (default)
- *                             dj -d  | 3 - verbose status messages */
-
-/* (-n)  */ static char noerror;     /* 0 - exits on partial reads or writes
-                                      *     (default)
-                                      * 1 - retries on partial reads/writes
-                                      *     (-n) */
-
-/* Non-configurable defaults. */
-#define bs_default 1024 /* GNU dd(1) default; twice POSIX but a neat 2^10 */
-static char *program_name = "<no argv[0]>";
 static char *stdin_name = "<stdin>";
 static char *stdout_name = "<stdout>";
-static int read_flags = O_RDONLY; /* These flags are consistent with Busybox */
-static int write_flags = O_WRONLY | O_CREAT; /* dd(1). */
 
-/* Macro to set defaults for user-configurable options. */
-#define setdefaults do{ \
-	align = -1; \
-	count = 0; \
-	debug = 2; \
-	fmt_output = fmt_asv; \
-	noerror = 0; \
-	ep[0].fl = read_flags; \
-	Io_setdefaults(&ep[0]); \
-	ep[1].fl = write_flags; \
-	Io_setdefaults(&ep[1]); }while(0)
+static int creat_mode = S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH
+	| S_IWOTH; /* Consistent with touch(1p). */
+static int read_flags = O_RDONLY; /* Consistent with Busybox dd(1). */
+static int write_flags = O_WRONLY | O_CREAT;
 
 #define MIN(a, b) (((a) < (b)) ? (a) : (b))
 
-/* Macro to check if fd is a std* file, e.g. stdin. */
-#define fdisstd(fd) \
-		((fd) == STDIN_FILENO \
-		|| (fd) == STDOUT_FILENO \
-		|| (fd) == STDERR_FILENO)
+/* Macro to check if fd is stdin or stdout */
+#define fdisstd(fd) ((fd) == STDIN_FILENO || (fd) == STDOUT_FILENO)
 
-/* Macro to call the cleanup functions that operate on struct io on the
- * particular io[2] used in main. Error conditions are not checked because this
- * is only used when the program is about to terminate (hence its name). */
-#define terminate(io) do{ \
-	Io_buffree(&(io)[0]); \
-	Io_buffree(&(io)[1]); \
-	Io_fdclose(&(io)[0]); \
-	Io_fdclose(&(io)[1]); }while(0)
-
-/* Allocates *io's buffer. Returns NULL if unsuccessful. */
-static void *
-Io_bufalloc(struct Io *io){
-
-	return (io->buf = malloc(io->bs * (sizeof *io->buf)));
-}
-
-/* Frees *io's buffer. Returns io. */
+/* Completes one Io block read */
 static struct Io *
-Io_buffree(struct Io *io){
-
-	free(io->buf);
-
-	return io;
-}
-
-/* Fills the unused portion of io's buffer with padding, updating io->bufuse.
- * Returns io. */
-static struct Io *
-Io_bufrpad(struct Io *io, int padding){
-	
-	memset(io->buf + io->bufuse, padding, io->bs - io->bufuse);
-	io->bufuse = io->bs;
-
-	return io;
-}
-
-/* Copies from the buffer in src as much as possible to the free space in the
- * dest buffer, removing the copied units from src and permuting the remaining
- * units in the src buffer to the start of the buffer, modifying both the src
- * and dest bufuse and returning dest. */
-static struct Io*
-Io_bufxapp(struct Io *dest, struct Io *src){
-	int n;
-
-	n = MIN(src->bufuse, dest->bs - dest->bufuse);
-	memcpy(dest->buf + dest->bufuse, src->buf, n);
-	dest->bufuse += n;
-	memmove(src->buf, src->buf + n, src->bs - n);
-	src->bufuse -= n;
-
-	return dest;
-}
-
-/* Copies from the buffer in src to the buffer in dest no more than n units,
- * removing the copied units from src and permuting the remaining units in the
- * src buffer to the start of the buffer, modifying both the src and dest
- * bufuse and returning dest. */
-static struct Io*
-Io_bufxfer(struct Io *dest, struct Io *src, int n){
-
-	memcpy(dest->buf, src->buf, (dest->bufuse = n));
-	memmove(src->buf, src->buf + n, (src->bufuse -= n));
-
-	return dest;
-}
-
-/* Closes io->fn and returns -1 on error, otherwise io->fd. */
-static int
-Io_fdclose(struct Io *io){
-
-	return fdisstd(io->fd)
-		? 0
-		: close(io->fd);
-}
-
-/* Opens io->fn and saves the file descriptor into io->fd. Returns io->fd,
- * which will be -1 if an error occured. */
-static int
-Io_fdopen(struct Io *io, char *fn){
-	int fd;
-	
-	if((fd = open(fn, io->fl,
-					/* these are the flags used by touch(1p) */
-					S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH))
-				!= -1
-			&& Io_fdclose(io) == 0){
-		io->fd = fd;
-		io->fn = fn;
-	}
-
-	return fd;
-}
-
-/* Seeks io->seek bytes through *io's file descriptor, (counter-intuitively)
- * returning -1 if successful and a sysexits.h exit code if an unrecoverable
- * error occurred. io->buf will be cleared of useful bytes and io->seek will
- * be set to zero to indicate the seek occurred. */
-static int
-Io_fdseek(struct Io *io){
-	int (*op)(int, void *, size_t);
-	
-	if(!fdisstd(io->fd) && lseek(io->fd, io->seek, SEEK_SET) != -1)
-		return -1;
-	else if(io->fl == write_flags){
-		memset(io->buf, '\0', io->bs);
-		/* This is a dirty trick; rather than testing conditions and operating
-		 * likewise, because the parameters to read or write are going to be
-		 * the same either way, just use a function pointer to keep track of
-		 * the intended operation. */
-		op = (int (*)(int, void *, size_t))&write;
-		/* Function pointer casts are risky; this works because the difference
-		 * is in the second parameter and only that write(2) makes the buffer
-		 * const whereas read(2) does not. To avoid even the slightest
-		 * undefined behavior comment out the cast, just be ready for a
-		 * -Wincompatible-function-pointer-types if your compiler notices it.
-		 */
-	}else
-		op = &read;
-
-	/* We're going to cheat and use bufuse as the retval for write(2), which is
-	 * fine because it'll be zeroed as this function returns anyway. */
-	do{	if(	(io->bufuse = (*op)(io->fd, io->buf, MIN(io->bs, io->seek))) == 0)
-			/* second chance */
-			io->bufuse = (*op)(io->fd, io->buf, MIN(io->bs, io->seek));
-	}while((io->seek -= io->bufuse) > 0 && io->bufuse != 0);
-
-	io->bufuse = 0;
-
-	return -1;
-}
-
-/* Reads io->bs bytes from *io's file descriptor into io->buf, storing the
- * number of read bytes in io->bufuse and updating io->bytes. If io->bufuse is
- * 0, errno will probably be set. Returns io. */
-static struct Io *
-Io_read(struct Io *io){
-
-	io->bytes += (io->bufuse = read(io->fd, io->buf, io->bs));
-
-	return io;
-}
-
-/* Sets the variables in a struct *io to the defaults. Identifies the read/
- * write ends of the "pipe" by checking io->fl. Returns io. */
-static struct Io *
-Io_setdefaults(struct Io *io){
-
-	io->bs = bs_default;
-	io->buf = NULL;
-	io->bytes = 0;
-	io->fd = (io->fl == read_flags) ? STDIN_FILENO : STDOUT_FILENO;
-	io->fn = (io->fl == read_flags) ? stdin_name   : stdout_name;
-	io->prec = 0;
-	io->rec = 0;
-	io->seek = 0;
-
-	return io;
-}
-
-/* Writes io->bufuse units from io->buf to io->fd, permuting any unwritten
- * bytes to the start of io->buf and updating io->bufuse. If io->bufuse doesn't
- * change, errno will probably be set. Returns io. */
-static struct Io *
-Io_write(struct Io *io){
+Io_read(struct Io *io) {
 	int t;
 
-	if((t = write(io->fd, io->buf, io->bufuse)) > 0)
-		memmove(io->buf, io->buf + t, (io->bufuse -= t));
-	io->bytes += t;
+	assert(io->bs > 0);
+	assert(io->bufuse < io->bs);
+
+	if ((t = read(io->fd, &(io->buf)[io->bufuse], io->bs - io->bufuse)) < 0) {
+		io->error = errno;
+		t = 0;
+	}
+
+	io->bufuse += t;
+	io->bytes  += t;
+	io->prec   += (0 < io->bufuse && io->bufuse < io->bs);
+	io->rec    += (io->bufuse == io->bs);
+
+	assert(io->bufuse <= io->bs);
 
 	return io;
 }
 
-/* Prints an error message suitable for the event of an operating system error,
- * with the error itself to be described in the string s. */
-static int
-oserr(char *s){
+/* Completes one Io block write */
+static struct Io *
+Io_write(struct Io *io) {
+	int t;
 
-	fprintf(stderr, "%s: %s: %s\n", program_name, s, strerror(errno));
+	assert(io->bufuse > 0);
+	assert(io->bufuse <= io->bs);
+
+	if ((t = write(io->fd, io->buf, io->bufuse)) < 0) {
+		io->error = errno;
+		t = 0;
+	} else if (t > 0) {
+		(void)memmove(io->buf, &(io->buf)[t], (io->bufuse -= t));
+	}
+
+	io->bytes += t;
+	io->prec  += (t > 0 && io->bufuse > 0);
+	io->rec   += (t > 0 && io->bufuse == 0);
+
+	return io;
+}
+
+static int
+oserr(char *e, int n) { /* program_name: [failing component:] error */
+	(void)fprintf(stderr, "%s: ", program_name);
+	if (e != NULL) { (void)fprintf(stderr, "%s: ", e); }
+	(void)fprintf(stderr, "%s\n", strerror(n));
 
 	return EX_OSERR;
 }
 
 /* Prints statistics regarding the use of dj, particularly partially and
- * completely read and written records, accessing debug, ep, and fmt_output. */
-static void
-output(void){
-
-	if(debug >= 1)
-		fprintf(stderr, fmt_output,
-			ep[0].rec, ep[0].prec, ep[1].rec, ep[1].prec,
-			ep[0].bytes, ep[1].bytes);
-
-	return;
+ * completely read and written records. */
+static int
+fprintio(FILE *stream, char *fmt, struct Io io[2]) {
+	return fprintf(
+		stream,
+		fmt,
+		io[0].rec,
+		io[0].prec,
+		io[1].rec,
+		io[1].prec,
+		io[0].bytes,
+		io[1].bytes
+	);
 }
 
+/* To be assigned to main:fmt and used with printio(). */
+static char *fmt_asv =
+	"%d" /* io[0].rec   */ "\037" /* ASCII US */
+	"%d" /* io[0].prec  */ "\036" /* ASCII RS */
+	"%d" /* io[1].rec   */ "\037" /* ASCII US */
+	"%d" /* io[1].prec  */ "\035" /* ASCII GS */
+	"%d" /* io[0].bytes */ "\036" /* ASCII RS */
+	"%d" /* io[1].bytes */ "\034" /* ASCII FS */
+	"\n"
+;
+static char *fmt_human = "%d+%d > %d+%d; %d > %d\n";
+
 /* Parses the string s to an integer, returning either the integer or in the
  * case of an error a negative integer. This is used for argument parsing
  * (e.g. -B [int]) in dj and no negative integer would be valid anyway. */
 static long
-parse(char *s){
+parse(char *s) {
 	long r;
 
 	errno = 0;
 	r = strtol(s, &s, 0);
-	return (*s == '\0' /* no chars left unparsed */ && errno == 0)
-		? r
-		: -1;
+	return (*s == '\0' /* no chars left unparsed */ && errno == 0) ? r : -1;
 }
 
 static int
-usage(void){
-
-	fprintf(stderr, "Usage: %s (-AdfHqQ) (-a [byte]) (-c [count])\n"
-		"\t(-i [input file]) (-b [input block size]) (-s [input offset])\n"
-		"\t(-o [output file]) (-B [output block size]) (-S [output offset])\n",
-		program_name);
+usage(char *argv0) {
+	(void)fprintf(
+		stderr,
+		"Usage: %s [-Hn] [-a byte] [-c count]\n"
+		"\t[-i file] [-b block_size] [-s offset]\n"
+		"\t[-o file] [-B block_size] [-S offset]\n",
+		argv0
+	);
 
 	return EX_USAGE;
 }
 
-int main(int argc, char *argv[]){
-	int c;
-	int i;
+int main(int argc, char *argv[]) {
+   	int align;    /* low 8b used, negative if no alignment is being done */
+	int count;    /* -1 if dj(1) runs until no more reads are possible */
+	char *fmt;    /* set to fmt_asv (default) or fmt_human (-H) */
+	size_t i;     /* side of io (in or out) being modified */
+	bool retry;   /* false if exits on partial reads or writes */
+	struct Io io[2 /* { in, out } */];
 
-	setdefaults;
+#ifdef __OpenBSD__
+	if (pledge("cpath rpath stdio unveil wpath", NULL) == -1) {
+		return oserr(NULL, errno);
+	}
+#endif
+
+	/* Set defaults. */
+	align = -1;
+	count = -1;
+	fmt = fmt_asv;
+	retry = 0;
+	for (i = 0; i < (sizeof io) / (sizeof *io); ++i) {
+		io[i].bs = 1024 /* 1 KiB */; /* GNU dd(1) default; POSIX says 512B */
+		io[i].bufuse = 0;
+		io[i].bytes = 0;
+		io[i].fd = i == 0 ? STDIN_FILENO : STDOUT_FILENO;
+		io[i].fn = i == 0 ? stdin_name   : stdout_name;
+		io[i].fl = i == 0 ? read_flags   : write_flags;
+		io[i].error = 0;
+		io[i].prec = 0;
+		io[i].rec = 0;
+		io[i].seek = 0;
+	}
+
+	if (argc > 0) {
+		int c;
 
-	if(argc > 0){
 		program_name = argv[0];
-		while((c = getopt(argc, argv, "a:Ab:B:c:di:hHnqs:S:o:")) != -1)
-			switch(c){
-			case 'i': case 'o':
-				i = (c == 'o');
-				if(optarg[0] == '-' && optarg[1] == '\0'){ /* optarg == "-" */
-					ep[i].fd = (i == 0) ? STDIN_FILENO : STDOUT_FILENO;
-					ep[i].fn = (i == 0) ? stdin_name   : stdout_name;
-					break;
-				}else if(Io_fdopen(&ep[i], optarg) != -1)
-					break;
-				terminate(ep);
-				return oserr(optarg);
-			case 'A': align = '\0'; break;
-			case 'd': ++debug; break;
-			case 'n': noerror = 1; break;
-			case 'H': fmt_output = fmt_human; break;
-			case 'q': --debug; break;
-			case 'a':
-				if(optarg[0] != '\0' && optarg[1] == '\0'){
-					align = optarg[0];
-					break;
-				}
-				/* FALLTHROUGH */
-			case 'c': case 'b': case 's': case 'B': case 'S':
-				if(c == 'c' && (count = parse(optarg)) >= 0)
-					break;
-				i = isupper(c);
-				c = tolower(c);
-				if((c == 'b' && (ep[i].bs = parse(optarg)) > 0)
-						|| (c == 's' && (ep[i].seek = parse(optarg)) >= 0))
-					break;
-				/* FALLTHROUGH */
-			default:
-				terminate(ep);
-				return usage();
+		while ((c = getopt(argc, argv, "a:b:B:c:i:hHns:S:o:")) != -1) {
+			switch (c) {
+				case 'i': case 'o': /* input, output */
+					i = (c == 'o');
+
+					/* optarg == "-" (stdin/stdout) */
+					if (optarg[0] == '-' && optarg[1] == '\0') { 
+						io[i].fd = i == 0 ? STDIN_FILENO : STDOUT_FILENO;
+						io[i].fn = i == 0 ? stdin_name   : stdout_name;
+						break;
+					} else {
+						int fd;
+
+#ifdef __OpenBSD__
+						if (unveil(optarg, i == 0 ? "r" : "wc") == -1) {
+							return oserr(NULL, errno);
+						}
+#endif
+
+						if (
+							(fd = open(optarg, io[i].fl, creat_mode)) != -1
+							&& (fdisstd(io[i].fd) || close(io[i].fd) == 0)
+						) {
+							io[i].fd = fd;
+							io[i].fn = optarg;
+							break;
+						}
+					}
+
+					return oserr(optarg, errno);
+					/* UNREACHABLE */
+				case 'n': retry = 1; break; /* retry failed reads once */
+				case 'H': fmt = fmt_human; break; /* human-readable output */
+				case 'a': /* input buffer padding */
+					if (optarg[0] == '\0' || optarg[1] == '\0') {
+						align = optarg[0];
+						break;
+					}
+					/* FALLTHROUGH */
+				case 'c': /* number of reads */
+				case 'b': case 'B': /* input/output block size */
+				case 's': case 'S': /* (s)kip/(S)eek in input/output */
+					if (c == 'c' && (count = parse(optarg)) >= 0) { break; }
+
+					i = (c >= 'A' && c <= 'Z');
+					c |= 0x20; /* 0b 0010 0000 (ASCII) make lowercase */
+
+					if ( /* if -b or -s is parsed out correctly */
+						(c == 'b' && (io[i].bs = parse(optarg)) > 0)
+						|| (c == 's' && (io[i].seek = parse(optarg)) >= 0)
+					) { break; } /* don't error */
+
+					/* FALLTHROUGH */
+				default:
+					return usage(program_name);
 			}
+		}
 	}
 
-	if(debug >= 3)
-		fprintf(stderr,
-			"argv0=%s\n"
-			"in=%s\tibs=%d\tskip=%ld\talign=%hhx\tcount=%d\n"
-			"out=%s\tobs=%d\tseek=%ld\tdebug=%2d\tnoerror=%d\n",
-			program_name,
-			ep[0].fn, ep[0].bs, ep[0].seek, align, count,
-			ep[1].fn, ep[1].bs, ep[1].seek, debug, noerror);
+#ifdef __OpenBSD__
+	if (unveil(NULL, NULL) == -1) { return oserr(NULL, errno); }
+#endif
 
-	if(argc > optind){
-		terminate(ep);
-		return usage();
-	}
+	assert(io->fd != STDIN_FILENO  || io->fl == read_flags);
+	assert(io->fd != STDOUT_FILENO || io->fl == write_flags);
 
-	for(i = 0; i <= 1; ++i){
-		if(Io_bufalloc(&ep[i]) == NULL){
-			fprintf(stderr, "%s: Failed to allocate %d bytes\n",
-				program_name, ep[i].bs);
-			terminate(ep);
+	if (argc > optind) { return usage(program_name); }
+
+	for (i = 0; i < (sizeof io) / (sizeof *io); ++i) {
+		/* buffer allocation */
+		if ((io[i].buf = malloc(io[i].bs * (sizeof *(io[i].buf)))) == NULL) {
+			(void)fprintf(
+				stderr, "%s: Failed to allocate %zd bytes\n",
+				program_name, io[i].bs
+			);
 			return EX_OSERR;
-		}else if(ep[i].seek > 0)
-			switch(Io_fdseek(&ep[i])){
-			case EX_OK:
-				output();
-				terminate(ep);
-				return EX_OK;
-			}
+		}
+
+		/* easy seeking */
+		if (!fdisstd(io[i].fd) && lseek(io[i].fd, io[i].seek, SEEK_SET) != -1) {
+			io[i].seek = 0;
+		}
 	}
 
-	do{	/* read */
-		Io_read(&ep[0]);
-		if(!noerror && ep[0].bufuse == 0)
-			Io_read(&ep[0]); /* second chance */
-		if(ep[0].bufuse == 0) /* that's all she wrote */
-			break;
-		else if(ep[0].bufuse < ep[0].bs){
-			++ep[0].prec;
-			if(debug >= 2){
-				fprintf(stderr, "%s: Partial read:\n\t", program_name);
-				output();
+	assert(io[1].bufuse == 0); /* requirement for hard seeking */
+
+	/* hard seeking; t is io[1].bufuse, before Io_write subtracts from it */
+	for(size_t t; io[1].seek > 0; io[1].seek -= (t - io[1].bufuse)) {
+		(void)memset(
+			io[1].buf, '\0', /* set buf to all nulls */
+			(t = io[1].bufuse = MIN(io[1].bs, io[1].seek)) /* saturate block */
+		);
+
+		if (Io_write(&io[1])->bufuse == t && !retry && io[1].error == 0) {
+			(void)Io_write(&io[1]); /* second chance */
+		}
+
+		if (io[1].error != 0) { return oserr(io[1].fn, io[1].error); }
+
+		if (io[1].bufuse == t) { break; } /* all writes failed! */
+	}
+
+	io[1].bufuse = 0; /* reset after hard seek */
+
+	if (io[1].seek > 0) { /* hard seeking failed */
+		(void)fprintio(stderr, fmt, io);
+		return oserr(io[1].fn, errno);
+	}
+
+	for (	;
+			count == -1 || count > 0;
+			count -= (count != -1) /* decrement if counting */
+	) {
+		assert(io[0].bufuse == 0);
+
+		{ /* read */
+			long skipping;
+			size_t t;
+
+			/* hack to intentionally get a partial read from Io_read */
+			if ((skipping = MIN(io[0].seek, io[0].bs)) > 0) {
+				io[0].bufuse = io[0].bs - (size_t)skipping;
 			}
-			if(!noerror)
-				count = 1;
-			if(align >= 0)
-				Io_bufrpad(&ep[0], align);
-		}else
-			++ep[0].rec;
 
-		/* write */
-		do{	if(ep[1].bs > ep[0].bs){ /* io[1].bs > io[0].bs */
-				Io_bufxapp(&ep[1], &ep[0]);
-				if(ep[0].bs + ep[1].bufuse <= ep[1].bs && count != 1)
-					continue; /* we could write more */
-			}else
-				Io_bufxfer(&ep[1], &ep[0], MIN(ep[0].bufuse, ep[1].bs));
+			t = io[0].bufuse;
+			if (Io_read(&io[0])->bufuse == t && !retry && io[0].error == 0) {
+				(void)Io_read(&io[0]); /* second chance */
+			}
 
-			c = ep[1].bufuse;
-			Io_write(&ep[1]);
-			if(!noerror && ep[1].bufuse == c)
-				Io_write(&ep[1]); /* second chance */
-			if(c == ep[1].bufuse){ /* no more love */
-				count = 1;
-				break;
-			}else if(c > ep[1].bufuse && ep[1].bufuse > 0){
-				ep[1].prec += 1;
-				if(debug >= 2){
-					fprintf(stderr, "%s: Partial write:\n\t", program_name);
-					output();
+			assert(io[0].bufuse >= t);
+
+			if (io[0].bufuse == t) { break; } /* that's all she wrote */
+
+			if (/* t < io[0].bufuse && */ io[0].bufuse < io[0].bs) {
+				(void)fprintf(stderr, "%s: Partial read:\n\t", program_name);
+				(void)fprintio(stderr, fmt, io);
+
+				if (!retry) { count = 1; }
+
+				if (align >= 0) {
+					/* fill the rest of the ibuf with padding */
+					(void)memset(
+						&(io[0].buf)[io[0].bufuse],
+						align,
+						io[0].bs - io[0].bufuse
+					);
+
+					io->bufuse = io->bs;
 				}
-				if(!noerror)
-					count = 1;
-			}else if(ep[1].bufuse == 0 && c < ep[1].bs)
-				++ep[1].prec;
-			else
-				++ep[1].rec;
-		}while(ep[0].bufuse > 0);
-	}while(count == 0 || --count > 0);
+			}
 
-	output();
-	terminate(ep);
+			if (skipping > 0) {
+				io[0].seek -= skipping;
+				io[0].bufuse = 0;
+				count += (count != -1); /* increment if counting */
+				continue;
+			}
+		}
+
+		assert(io[0].bufuse > 0);
+
+		while (io[0].bufuse > 0) { /* write */
+			if (io[0].bs <= io[1].bs) {
+				int n;
+
+				(void)memcpy( /* saturate obuf */
+					io[1].buf, io[0].buf,
+				   (io[1].bufuse = (n = MIN(io[0].bufuse, io[1].bs)))
+				);
+
+				/* permute the copied units out of ibuf */
+				(void)memmove(io[0].buf, &(io[0].buf)[n], (io[0].bufuse -= n));
+			} else /* if(io[0].bs > io[1].bs) */ {
+				int n;
+
+				/* drain what we can from ibuf */
+				(void)memcpy(
+					&(io[1].buf)[io[1].bufuse], io[0].buf,
+				    (n = MIN(io[0].bufuse, io[1].bs - io[1].bufuse))
+				);
+				io[1].bufuse += n;
+
+				/* permute out the copied units */
+				(void)memmove(io[0].buf, &(io[0].buf)[n], io[0].bs - n);
+				io[0].bufuse -= n;
+
+				if(io[0].bs + io[1].bufuse <= io[1].bs && count != 1) {
+					continue; /* obuf not saturated - we could write more */
+				}
+			}
+
+			{ /* writes actually happen, or die */
+				size_t t;
+
+				t = io[1].bufuse;
+				if (Io_write(&io[1])->bufuse == t
+						&& !retry
+						&& io[1].error == 0) {
+					(void)Io_write(&io[1]); /* second chance */
+				}
+
+				assert(io[1].error == 0 || io[1].bufuse == t);
+				/* if the Io_writes errored, bufuse wouldn't have changed, and
+				 * the error will be reported at the end of the read/write
+				 * loop */
+
+				assert(io[1].bufuse <= t);
+
+				if (io[1].bufuse == t) { /* no more love */
+					count = 1;
+					break;
+				}
+			}
+
+			if (0 < io[1].bufuse /* && io[1].bufuse < t */) {
+				(void)fprintf(stderr, "%s: Partial write:\n\t", program_name);
+				(void)fprintio(stderr, fmt, io);
+
+				if(!retry) { count = 1; }
+			}
+		}
+	}
+
+	(void)fprintio(stderr, fmt, io);
+
+	for (i = 0; i < (sizeof io) / (sizeof *io); ++i) {
+		if (io[i].error) { return oserr(io[i].fn, io[i].error); }
+	}
 
 	return EX_OK;
 }

src/false.c

@@ -1,9 +1,19 @@
 /*
- * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+ * Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+ * Copyright (c) 2024 DTB <trinity@trinity.moe>
  * SPDX-License-Identifier: CC0
  *
  * This work is marked with CC0 1.0. To view a copy of this license, visit
  * <http://creativecommons.org/publicdomain/zero/1.0>.
  */
 
-int main() { return 1; }
+#ifdef __OpenBSD__
+#	include <unistd.h> /* pledge(2) */
+#endif
+
+int main(void) {
+#ifdef __OpenBSD__
+	pledge(NULL, NULL);
+#endif
+	return 1;
+}

src/fop.rs

@@ -18,79 +18,143 @@
 
 use std::{
 	env::args,
-	io::{ Read, stdin, Write },
+	io::{ Read, stdin, stdout, Write },
 	process::{ Command, exit, Stdio },
 };
 
-extern crate sysexits;
 extern crate getopt;
+extern crate strerror;
+extern crate sysexits;
 
-use getopt::{ Opt, Parser };
-use sysexits::{ EX_DATAERR, EX_USAGE };
+use getopt::GetOpt;
+use strerror::StrError;
+use sysexits::{ EX_DATAERR, EX_IOERR, EX_UNAVAILABLE, EX_USAGE };
+
+#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
+#[cfg(target_os="openbsd")] extern crate openbsd;
+#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
 
 fn main() {
 	let argv = args().collect::<Vec<String>>();
-	let mut d = '␞';
-	let mut arg_parser = Parser::new(&argv, "d:");
+	let mut d = '\u{1E}'.to_string(); /* ASCII record separator */
+	let mut optind = 1;
 
-	while let Some(opt) = arg_parser.next() {
-		match opt {
-			Ok(Opt('d', Some(arg))) => {
-				let arg_char = arg.chars().collect::<Vec<char>>();
-				if arg_char.len() > 1 {
-					eprintln!("{}: {}: Not a character.", argv[0], arg);
-					exit(EX_USAGE);
-				} else { d = arg_char[0]; }
+	#[cfg(target_os="openbsd")] {
+		let promises = Promises::new("stdio proc exec");
+		if let Err(e) = pledge(Some(promises), None) {
+			eprintln!("{}: {}", argv[0], e.strerror());
+			exit(EX_OSERR);
+		}
+	}
+
+	let usage = format!(
+		"Usage: {} [-d delimiter] index command [args...]",
+		argv[0],
+	);
+
+	while let Some(opt) = argv.getopt("d:") {
+		match opt.opt() {
+			Ok("d") => {
+				/* delimiter */
+				d = opt.arg().unwrap();
+				optind = opt.ind();
 			},
-			_ => {},
+			_ => {
+				eprintln!("{}", usage);
+				exit(EX_USAGE);
+			}
 		};
 	}
 
-	let index_arg = arg_parser.index();
-	let command_arg = arg_parser.index() + 1;
-
-	argv.get(command_arg).unwrap_or_else(|| {
-		eprintln!("Usage: {} [-d delimiter] index command [args...]", argv[0]);
-		exit(EX_USAGE);
-	});
-
-	let index = argv[index_arg].parse::<usize>().unwrap_or_else(|_| {
-		eprintln!("{}: {}: Not an integer.", argv[0], argv[1]);
+	/* parse the specified index as a number we can use */
+	let index = argv[optind].parse::<usize>().unwrap_or_else(|e| {
+		eprintln!("{}: {}: {}", argv[0], argv[1], e);
 		exit(EX_DATAERR);
 	});
 
+	/* index of the argv[0] for the operator command */
+	let command_arg = optind as usize + 1;
+
+	/* argv[0] of the operator command */
+	let operator = argv.get(command_arg).unwrap_or_else(|| {
+		eprintln!("{}", usage);
+		exit(EX_USAGE);
+	});
+
+	/* read entire standard input into memory */
 	let mut buf = String::new();
-	stdin().read_to_string(&mut buf).unwrap();
-	let mut fields = buf.split(d).collect::<Vec<&str>>();
+	if let Err(e) = stdin().read_to_string(&mut buf) {
+		eprintln!("{}: {}", argv[0], e.strerror());
+		exit(EX_IOERR);
+	};
 
-	let opts = argv.iter().clone().skip(command_arg + 1).collect::<Vec<&String>>();
+	/* split the buffer by the delimiter (by default, '\u{1E}') */
+	let mut fields = buf.split(&d).collect::<Vec<&str>>();
 
-	let mut spawned = Command::new(argv.get(command_arg).unwrap())
-		.args(opts)
+	/* collect arguments for the operator command */
+	let command_args = argv
+		.iter()
+		.clone()
+		.skip(command_arg + 1) /* skip the command name */
+		.collect::<Vec<&String>>();
+
+	/* spawn the command to operate on the field */
+	let mut spawned = Command::new(operator)
+		.args(command_args) /* spawn with the specified arguments */
 		.stdin(Stdio::piped())
-		.stdout(Stdio::piped())
+		.stdout(Stdio::piped()) /* piped stdout to handle output ourselves */
 		.spawn()
-		.unwrap();
+		.unwrap_or_else( |e| {
+			eprintln!("{}: {}: {}", argv[0], argv[command_arg], e.strerror());
+			exit(EX_UNAVAILABLE);
+		});
 
+	/* get field we want to pipe into spawned program */
 	let field = fields.get(index).unwrap_or_else(|| {
 		eprintln!(
-			"{}: {}: No such index in input.",
+			"{}: {}: No such index in input",
 			argv[0],
-			index.to_string()
+			index.to_string(),
 		);
 		exit(EX_DATAERR);
 	});
 
+	/* get the stdin of the newly spawned program and feed it the field val */
 	if let Some(mut child_stdin) = spawned.stdin.take() {
-		child_stdin.write_all(field.as_bytes()).unwrap();
-		drop(child_stdin);
+		let _ = child_stdin.write_all(field.as_bytes());
+		drop(child_stdin); /* stay safe! drop your children! */
 	}
 
-	let output = spawned.wait_with_output().unwrap();
+	let output = spawned.wait_with_output().unwrap_or_else(|e| {
+		eprintln!("{}: {}: {}", argv[0], argv[command_arg], e.strerror());
+		exit(EX_IOERR);
+	});
 
-	let new_field = String::from_utf8(output.stdout).unwrap();
+	/* get the output with which the original field will be replaced */
+	let mut replace = output.stdout.clone();
 
+	/* pop trailing newline out if the input did not contain it */
+	if fields[index].chars().last() != Some('\n') /* no newline */
+		&& replace.pop() != Some(b'\n') { /* pop last char of replacement */
+		/* restore replacement to original command output if popped char was not
+		 * a newline */
+		replace = output.stdout;
+	}
+
+	/* convert the output of the program to UTF-8 */
+	let new_field = String::from_utf8(replace).unwrap_or_else(|e| {
+		eprintln!("{}: {}: {}", argv[0], argv[command_arg], e);
+		exit(EX_IOERR);
+	});
+
+	/* store the new field in the old fields vector */
 	fields[index] = &new_field;
 
-	print!("{}", fields.join(&d.to_string()));
+	/* fop it */ 
+	stdout().write_all(
+		fields.join(&d.to_string()).as_bytes()
+	).unwrap_or_else(|e| {
+		eprintln!("{}: {}", argv[0], e.strerror());
+		exit(EX_IOERR);
+	});
 }

src/getopt-rs/error.rs

@@ -1,95 +0,0 @@
-/*
- * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and permission
- * notice:
- *     The Clear BSD License
- *
- *     Copyright © 2017-2023 David Wildasin
- *     All rights reserved.
- *
- *     Redistribution and use in source and binary forms, with or without
- *     modification, are permitted (subject to the limitations in the disclaimer
- *     below) provided that the following conditions are met:
- *
- *          * Redistributions of source code must retain the above copyright
- *          notice, this list of conditions, and the following disclaimer.
- *
- *          * Redistributions in binary form must reproduce the above copyright
- *          notice, this list of conditions, and the following disclaimer in the
- *          documentation and/or other materials provided with the distribution.
- *
- *          * Neither the name of the copyright holder nor the names of its
- *          contributors may be used to endorse or promote products derived from
- *          this software without specific prior written permission.
- *
- *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
- *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
- *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-use std::{ error, fmt };
-
-use crate::ErrorKind::{ self, * };
-
-/// A basic error type for [`Parser`](struct.Parser.html)
-#[derive(Debug, Eq, PartialEq)]
-pub struct Error {
-    culprit: char,
-    kind: ErrorKind,
-}
-
-impl Error {
-    /// Creates a new error using a known kind and the character that caused the
-	/// issue.
-    pub fn new(kind: ErrorKind, culprit: char) -> Self {
-        Self { culprit, kind }
-    }
-
-    /// Returns the [`ErrorKind`](enum.ErrorKind.html) for this error.
-    pub fn kind(self) -> ErrorKind {
-        self.kind
-    }
-}
-
-impl fmt::Display for Error {
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        match self.kind {
-            MissingArgument => write!(
-				f, 
-				"option requires an argument -- {:?}",
-				self.culprit,
-			),
-            UnknownOption => write!(f, "unknown option -- {:?}", self.culprit),
-        }
-    }
-}
-
-impl error::Error for Error {
-    fn source(&self) -> Option<&(dyn error::Error + 'static)> {
-        None
-    }
-}

src/getopt-rs/errorkind.rs

@@ -1,61 +0,0 @@
-/*
- * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and permission
- * notice:
- *     The Clear BSD License
- *
- *     Copyright © 2017-2023 David Wildasin
- *     All rights reserved.
- *
- *     Redistribution and use in source and binary forms, with or without
- *     modification, are permitted (subject to the limitations in the disclaimer
- *     below) provided that the following conditions are met:
- *
- *          * Redistributions of source code must retain the above copyright
- *          notice, this list of conditions, and the following disclaimer.
- *
- *          * Redistributions in binary form must reproduce the above copyright
- *          notice, this list of conditions, and the following disclaimer in the
- *          documentation and/or other materials provided with the distribution.
- *
- *          * Neither the name of the copyright holder nor the names of its
- *          contributors may be used to endorse or promote products derived from
- *          this software without specific prior written permission.
- *
- *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
- *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
- *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/// What kinds of errors [`Parser`](struct.Parser.html) can return.
-#[derive(Debug, Eq, PartialEq)]
-pub enum ErrorKind {
-    /// An argument was not found for an option that was expecting one.
-    MissingArgument,
-    /// An unknown option character was encountered.
-    UnknownOption,
-}

src/getopt-rs/lib.rs

@@ -1,72 +0,0 @@
-/*
- * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and permission
- * notice:
- *     The Clear BSD License
- *
- *     Copyright © 2017-2023 David Wildasin
- *     All rights reserved.
- *
- *     Redistribution and use in source and binary forms, with or without
- *     modification, are permitted (subject to the limitations in the disclaimer
- *     below) provided that the following conditions are met:
- *
- *          * Redistributions of source code must retain the above copyright
- *          notice, this list of conditions, and the following disclaimer.
- *
- *          * Redistributions in binary form must reproduce the above copyright
- *          notice, this list of conditions, and the following disclaimer in the
- *          documentation and/or other materials provided with the distribution.
- *
- *          * Neither the name of the copyright holder nor the names of its
- *          contributors may be used to endorse or promote products derived from
- *          this software without specific prior written permission.
- *
- *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
- *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
- *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-//! # getopt
-//!
-//! `getopt` provides a minimal, (essentially) POSIX-compliant option parser.
-
-pub use crate::{
-	error::Error,
-	errorkind::ErrorKind,
-	opt::Opt,
-	parser::Parser,
-	result::Result
-};
-
-mod error;
-mod errorkind;
-mod opt;
-mod parser;
-mod result;
-#[cfg(test)]
-mod tests;

src/getopt-rs/opt.rs

@@ -1,89 +0,0 @@
-/*
- * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and permission
- * notice:
- *     The Clear BSD License
- *
- *     Copyright © 2017-2023 David Wildasin
- *     All rights reserved.
- *
- *     Redistribution and use in source and binary forms, with or without
- *     modification, are permitted (subject to the limitations in the disclaimer
- *     below) provided that the following conditions are met:
- *
- *          * Redistributions of source code must retain the above copyright
- *          notice, this list of conditions, and the following disclaimer.
- *
- *          * Redistributions in binary form must reproduce the above copyright
- *          notice, this list of conditions, and the following disclaimer in the
- *          documentation and/or other materials provided with the distribution.
- *
- *          * Neither the name of the copyright holder nor the names of its
- *          contributors may be used to endorse or promote products derived from
- *          this software without specific prior written permission.
- *
- *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
- *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
- *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-use std::fmt;
-
-/// A single option.
-///
-/// For `Opt(x, y)`:
-///   - `x` is the character representing the option.
-///   - `y` is `Some` string, or `None` if no argument was expected.
-///
-/// # Example
-///
-/// ```
-/// # fn main() -> Result<(), Box<dyn std::error::Error>> {
-/// use getopt::Opt;
-///
-/// // args = ["program", "-abc", "foo"];
-/// # let args: Vec<String> = vec!["program", "-abc", "foo"]
-/// #     .into_iter()
-/// #     .map(String::from)
-/// #     .collect();
-/// let optstring = "ab:c";
-/// let mut opts = getopt::Parser::new(&args, optstring);
-///
-/// assert_eq!(Opt('a', None), opts.next().transpose()?.unwrap());
-/// assert_eq!(Opt('b', Some("c".to_string())), opts.next().transpose()?.unwrap());
-/// assert_eq!(None, opts.next().transpose()?);
-/// # Ok(())
-/// # }
-/// ```
-#[derive(Debug, Eq, Ord, PartialEq, PartialOrd)]
-pub struct Opt(pub char, pub Option<String>);
-
-impl fmt::Display for Opt {
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        write!(f, "Opt({:?}, {:?})", self.0, self.1)
-    }
-}

src/getopt-rs/parser.rs

@@ -1,382 +0,0 @@
-/*
- * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and permission
- * notice:
- *     The Clear BSD License
- *
- *     Copyright © 2017-2023 David Wildasin
- *     All rights reserved.
- *
- *     Redistribution and use in source and binary forms, with or without
- *     modification, are permitted (subject to the limitations in the disclaimer
- *     below) provided that the following conditions are met:
- *
- *          * Redistributions of source code must retain the above copyright
- *          notice, this list of conditions, and the following disclaimer.
- *
- *          * Redistributions in binary form must reproduce the above copyright
- *          notice, this list of conditions, and the following disclaimer in the
- *          documentation and/or other materials provided with the distribution.
- *
- *          * Neither the name of the copyright holder nor the names of its
- *          contributors may be used to endorse or promote products derived from
- *          this software without specific prior written permission.
- *
- *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
- *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
- *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-use std::collections::HashMap;
-
-use crate::{ error::Error, errorkind::ErrorKind, opt::Opt, result::Result };
-
-/// The core of the `getopt` crate.
-///
-/// `Parser` is implemented as an iterator over the options present in the given
-/// argument vector.
-///
-/// The method [`next`](#method.next) does the heavy lifting.
-///
-/// # Examples
-///
-/// ## Simplified usage:
-/// ```
-/// # fn main() -> Result<(), Box<dyn std::error::Error>> {
-/// use getopt::Opt;
-///
-/// // args = ["program", "-abc", "foo"];
-/// # let args: Vec<String> = vec!["program", "-abc", "foo"]
-/// #     .into_iter()
-/// #     .map(String::from)
-/// #     .collect();
-/// let mut opts = getopt::Parser::new(&args, "ab:c");
-///
-/// assert_eq!(Some(Opt('a', None)), opts.next().transpose()?);
-/// assert_eq!(1, opts.index());
-/// assert_eq!(Some(Opt('b', Some("c".to_string()))), opts.next().transpose()?);
-/// assert_eq!(2, opts.index());
-/// assert_eq!(None, opts.next());
-/// assert_eq!(2, opts.index());
-/// assert_eq!("foo", args[opts.index()]);
-/// # Ok(())
-/// # }
-/// ```
-///
-/// ## A more idiomatic example:
-/// ```
-/// # fn main() -> Result<(), Box<dyn std::error::Error>> {
-/// use getopt::Opt;
-///
-/// // args = ["program", "-abc", "-d", "foo", "-e", "bar"];
-/// # let mut args: Vec<String> = vec!["program", "-abc", "-d", "foo", "-e", "bar"]
-/// #     .into_iter()
-/// #     .map(String::from)
-/// #     .collect();
-/// let mut opts = getopt::Parser::new(&args, "ab:cd:e");
-///
-/// let mut a_flag = false;
-/// let mut b_flag = String::new();
-/// let mut c_flag = false;
-/// let mut d_flag = String::new();
-/// let mut e_flag = false;
-///
-/// loop {
-///     match opts.next().transpose()? {
-///         None => break,
-///         Some(opt) => match opt {
-///             Opt('a', None) => a_flag = true,
-///             Opt('b', Some(arg)) => b_flag = arg.clone(),
-///             Opt('c', None) => c_flag = true,
-///             Opt('d', Some(arg)) => d_flag = arg.clone(),
-///             Opt('e', None) => e_flag = true,
-///             _ => unreachable!(),
-///         },
-///     }
-/// }
-///
-/// let new_args = args.split_off(opts.index());
-///
-/// assert_eq!(true, a_flag);
-/// assert_eq!("c", b_flag);
-/// assert_eq!(false, c_flag);
-/// assert_eq!("foo", d_flag);
-/// assert_eq!(true, e_flag);
-///
-/// assert_eq!(1, new_args.len());
-/// assert_eq!("bar", new_args.first().unwrap());
-/// # Ok(())
-/// # }
-/// ```
-#[derive(Debug, Eq, PartialEq)]
-pub struct Parser {
-    opts: HashMap<char, bool>,
-    args: Vec<Vec<char>>,
-    index: usize,
-    point: usize,
-}
-
-impl Parser {
-    /// Create a new `Parser`, which will process the arguments in `args`
-	/// according to the options specified in `optstring`.
-    ///
-    /// For compatibility with
-	/// [`std::env::args`](https://doc.rust-lang.org/std/env/fn.args.html),
-    /// valid options are expected to begin at the second element of `args`, and
-	/// `index` is
-    /// initialised to `1`.
-    /// If `args` is structured differently, be sure to call
-	/// [`set_index`](#method.set_index) before the first invocation of
-	/// [`next`](#method.next).
-    ///
-    /// `optstring` is a string of recognised option characters; if a character
-	/// is followed by a colon (`:`), that option takes an argument.
-    ///
-    /// # Note:
-    /// Transforming the OS-specific argument strings into a vector of `String`s
-	/// is the sole responsibility of the calling program, as it involves some
-	/// level of potential information loss (which this crate does not presume
-	/// to handle unilaterally) and error handling (which would complicate the
-	/// interface).
-    pub fn new(args: &[String], optstring: &str) -> Self {
-        let optstring: Vec<char> = optstring.chars().collect();
-        let mut opts = HashMap::new();
-        let mut i = 0;
-        let len = optstring.len();
-
-        while i < len {
-            let j = i + 1;
-
-            if j < len && optstring[j] == ':' {
-                opts.insert(optstring[i], true);
-                i += 1;
-            } else {
-                opts.insert(optstring[i], false);
-            }
-            i += 1;
-        }
-
-        Self {
-            opts,
-            // "explode" the args into a vector of character vectors, to allow
-			// indexing
-            args: args.iter().map(|e| e.chars().collect()).collect(),
-            index: 1,
-            point: 0,
-        }
-    }
-
-    /// Return the current `index` of the parser.
-    ///
-    /// `args[index]` will always point to the the next element of `args`; when
-	/// the parser is
-    /// finished with an element, it will increment `index`.
-    ///
-    /// After the last option has been parsed (and [`next`](#method.next) is
-	/// returning `None`),
-    /// `index` will point to the first non-option argument.
-    pub fn index(&self) -> usize {
-        self.index
-    }
-
-    // `point` must be reset to 0 whenever `index` is changed
-
-    /// Modify the current `index` of the parser.
-    pub fn set_index(&mut self, value: usize) {
-        self.index = value;
-        self.point = 0;
-    }
-
-    /// Increment the current `index` of the parser.
-    ///
-    /// This use case is common enough to warrant its own optimised method.
-    pub fn incr_index(&mut self) {
-        self.index += 1;
-        self.point = 0;
-    }
-}
-
-impl Iterator for Parser {
-    type Item = Result<Opt>;
-
-    /// Returns the next option, if any.
-    ///
-    /// Returns an [`Error`](struct.Error.html) if an unexpected option is
-	/// encountered or if an
-    /// expected argument is not found.
-    ///
-    /// Parsing stops at the first non-hyphenated argument; or at the first
-	/// argument matching "-";
-    /// or after the first argument matching "--".
-    ///
-    /// When no more options are available, `next` returns `None`.
-    ///
-    /// # Examples
-    ///
-    /// ## "-"
-    /// ```
-    /// use getopt::Parser;
-    ///
-    /// // args = ["program", "-", "-a"];
-    /// # let args: Vec<String> = vec!["program", "-", "-a"]
-    /// #     .into_iter()
-    /// #     .map(String::from)
-    /// #     .collect();
-    /// let mut opts = Parser::new(&args, "a");
-    ///
-    /// assert_eq!(None, opts.next());
-    /// assert_eq!("-", args[opts.index()]);
-    /// ```
-    ///
-    /// ## "--"
-    /// ```
-    /// use getopt::Parser;
-    ///
-    /// // args = ["program", "--", "-a"];
-    /// # let args: Vec<String> = vec!["program", "--", "-a"]
-    /// #     .into_iter()
-    /// #     .map(String::from)
-    /// #     .collect();
-    /// let mut opts = Parser::new(&args, "a");
-    ///
-    /// assert_eq!(None, opts.next());
-    /// assert_eq!("-a", args[opts.index()]);
-    /// ```
-    ///
-    /// ## Unexpected option:
-    /// ```
-    /// use getopt::Parser;
-    ///
-    /// // args = ["program", "-b"];
-    /// # let args: Vec<String> = vec!["program", "-b"]
-    /// #     .into_iter()
-    /// #     .map(String::from)
-    /// #     .collect();
-    /// let mut opts = Parser::new(&args, "a");
-    ///
-    /// assert_eq!(
-    ///     "unknown option -- 'b'".to_string(),
-    ///     opts.next().unwrap().unwrap_err().to_string()
-    /// );
-    /// ```
-    ///
-    /// ## Missing argument:
-    /// ```
-    /// use getopt::Parser;
-    ///
-    /// // args = ["program", "-a"];
-    /// # let args: Vec<String> = vec!["program", "-a"]
-    /// #     .into_iter()
-    /// #     .map(String::from)
-    /// #     .collect();
-    /// let mut opts = Parser::new(&args, "a:");
-    ///
-    /// assert_eq!(
-    ///     "option requires an argument -- 'a'".to_string(),
-    ///     opts.next().unwrap().unwrap_err().to_string()
-    /// );
-    /// ```
-    fn next(&mut self) -> Option<Result<Opt>> {
-        if self.point == 0 {
-            /*
-             * Rationale excerpts below taken verbatim from "The Open Group Base
-			 * Specifications Issue 7, 2018 edition", IEEE Std 1003.1-2017
-			 * (Revision of IEEE Std 1003.1-2008).
-             * Copyright © 2001-2018 IEEE and The Open Group.
-             */
-
-            /*
-             * If, when getopt() is called:
-             *      argv[optind]    is a null pointer
-             *      *argv[optind]   is not the character '-'
-             *      argv[optind]    points to the string "-"
-             * getopt() shall return -1 without changing optind.
-             */
-            if self.index >= self.args.len()
-                || self.args[self.index].is_empty()
-                || self.args[self.index][0] != '-'
-                || self.args[self.index].len() == 1
-            {
-                return None;
-            }
-
-            /*
-             * If:
-             *      argv[optind]    points to the string "--"
-             * getopt() shall return -1 after incrementing index.
-             */
-            if self.args[self.index][1] == '-' && self.args[self.index].len() == 2 {
-                self.incr_index();
-                return None;
-            }
-
-            // move past the starting '-'
-            self.point += 1;
-        }
-
-        let opt = self.args[self.index][self.point];
-        self.point += 1;
-
-        match self.opts.get(&opt) {
-            None => {
-                if self.point >= self.args[self.index].len() {
-                    self.incr_index();
-                }
-                Some(Err(Error::new(ErrorKind::UnknownOption, opt)))
-            }
-            Some(false) => {
-                if self.point >= self.args[self.index].len() {
-                    self.incr_index();
-                }
-
-                Some(Ok(Opt(opt, None)))
-            }
-            Some(true) => {
-                let arg: String = if self.point >= self.args[self.index].len() {
-                    self.incr_index();
-                    if self.index >= self.args.len() {
-                        return Some(Err(Error::new(
-									ErrorKind::MissingArgument,
-									opt,
-								)));
-                    }
-                    self.args[self.index].iter().collect()
-                } else {
-                    self.args[self.index]
-                        .clone()
-                        .split_off(self.point)
-                        .iter()
-                        .collect()
-                };
-
-                self.incr_index();
-
-                Some(Ok(Opt(opt, Some(arg))))
-            }
-        }
-    }
-}

src/getopt-rs/result.rs

@@ -1,59 +0,0 @@
-/*
- * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and permission
- * notice:
- *     The Clear BSD License
- *
- *     Copyright © 2017-2023 David Wildasin
- *     All rights reserved.
- *
- *     Redistribution and use in source and binary forms, with or without
- *     modification, are permitted (subject to the limitations in the disclaimer
- *     below) provided that the following conditions are met:
- *
- *          * Redistributions of source code must retain the above copyright
- *          notice, this list of conditions, and the following disclaimer.
- *
- *          * Redistributions in binary form must reproduce the above copyright
- *          notice, this list of conditions, and the following disclaimer in the
- *          documentation and/or other materials provided with the distribution.
- *
- *          * Neither the name of the copyright holder nor the names of its
- *          contributors may be used to endorse or promote products derived from
- *          this software without specific prior written permission.
- *
- *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
- *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
- *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-use std::result;
-
-use crate::error::Error;
-
-/// A specialized `Result` type for use with [`Parser`](struct.Parser.html)
-pub type Result<T> = result::Result<T, Error>;

src/getopt-rs/tests.rs

@@ -1,228 +0,0 @@
-/*
- * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- *
- * This file incorporates work covered by the following copyright and permission
- * notice:
- *     The Clear BSD License
- *
- *     Copyright © 2017-2023 David Wildasin
- *     All rights reserved.
- *
- *     Redistribution and use in source and binary forms, with or without
- *     modification, are permitted (subject to the limitations in the disclaimer
- *     below) provided that the following conditions are met:
- *
- *          * Redistributions of source code must retain the above copyright
- *          notice, this list of conditions, and the following disclaimer.
- *
- *          * Redistributions in binary form must reproduce the above copyright
- *          notice, this list of conditions, and the following disclaimer in the
- *          documentation and/or other materials provided with the distribution.
- *
- *          * Neither the name of the copyright holder nor the names of its
- *          contributors may be used to endorse or promote products derived from
- *          this software without specific prior written permission.
- *
- *     NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED
- *     BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
- *     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- *     FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- *     HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- *     TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- *     PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- *     LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- *     NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- *     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-use crate::{Opt, Parser};
-
-macro_rules! basic_test {
-    ($name:ident, $expect:expr, $next:expr, [$($arg:expr),+], $optstr:expr) => (
-        #[test]
-        fn $name() -> Result<(), String> {
-            let expect: Option<Opt> = $expect;
-            let args: Vec<String> = vec![$($arg),+]
-				.into_iter()
-				.map(String::from)
-				.collect();
-            let next: Option<String> = $next;
-            let mut opts = Parser::new(&args, $optstr);
-
-            match opts.next().transpose() {
-                Err(error) => {
-                    return Err(format!("next() returned {:?}", error))
-                },
-                Ok(actual) => if actual != expect {
-                    return Err(
-						format!("expected {:?}; got {:?}", expect, actual)
-					)
-                },
-            };
-
-            match next {
-                None => if opts.index() < args.len() {
-                    return Err(format!(
-							"expected end of args; got {:?}", args[opts.index()]
-					))
-                },
-                Some(n) => if args[opts.index()] != n {
-                    return Err(format!(
-							"next arg: expected {:?}; got {:?}",
-							n,
-							args[opts.index()]
-					))
-                },
-            };
-
-            Ok(())
-        }
-    )
-}
-
-#[rustfmt::skip] basic_test!(
-	blank_arg, None, Some(String::new()), ["x", ""], "a"
-);
-#[rustfmt::skip] basic_test!(
-	double_dash, None, Some("-a".to_string()), ["x", "--", "-a", "foo"], "a"
-);
-#[rustfmt::skip] basic_test!(no_opts_1, None, None, ["x"], "a");
-#[rustfmt::skip] basic_test!(
-	no_opts_2, None, Some("foo".to_string()), ["x", "foo"], "a"
-);
-#[rustfmt::skip] basic_test!(
-	no_opts_3, None, Some("foo".to_string()), ["x", "foo", "-a"], "a"
-);
-#[rustfmt::skip] basic_test!(
-	single_dash, None, Some("-".to_string()), ["x", "-", "-a", "foo"], "a"
-);
-#[rustfmt::skip] basic_test!(
-	single_opt,
-	Some(Opt('a', None)),
-	Some("foo".to_string()),
-	["x", "-a", "foo"],
-	"a"
-);
-#[rustfmt::skip] basic_test!(
-	single_optarg,
-	Some(Opt('a', Some("foo".to_string()))),
-	None,
-	["x", "-a", "foo"],
-	"a:"
-);
-
-macro_rules! error_test {
-    ($name:ident, $expect:expr, [$($arg:expr),+], $optstr:expr) => (
-        #[test]
-        fn $name() -> Result<(), String> {
-            let expect: String = $expect.to_string();
-            let args: Vec<String> = vec![$($arg),+]
-				.into_iter()
-				.map(String::from)
-				.collect();
-            let mut opts = Parser::new(&args, $optstr);
-
-            match opts.next() {
-                None => {
-                    return Err(format!(
-							"unexpected successful response: end of options"
-					))
-                },
-                Some(Err(actual)) => {
-                    let actual = actual.to_string();
-
-                    if actual != expect {
-                        return Err(
-							format!("expected {:?}; got {:?}", expect, actual)
-						);
-                    }
-                },
-                Some(Ok(opt)) => {
-                    return Err(
-						format!("unexpected successful response: {:?}", opt)
-					)
-                },
-            };
-
-            Ok(())
-        }
-    )
-}
-
-#[rustfmt::skip] error_test!(
-	bad_opt,
-	"unknown option -- 'b'",
-	["x", "-b"],
-	"a"
-);
-
-#[rustfmt::skip] error_test!(
-	missing_optarg,
-	"option requires an argument -- 'a'",
-	["x", "-a"],
-	"a:"
-);
-
-#[test]
-fn multiple() -> Result<(), String> {
-    let args: Vec<String> = vec!["x", "-abc", "-d", "foo", "-e", "bar"]
-        .into_iter()
-        .map(String::from)
-        .collect();
-    let optstring = "ab:d:e".to_string();
-    let mut opts = Parser::new(&args, &optstring);
-
-    macro_rules! check_result {
-        ($expect:expr) => {
-            let expect: Option<Opt> = $expect;
-            match opts.next().transpose() {
-                Err(error) => {
-					return Err(format!("next() returned {:?}", error));
-				},
-                Ok(actual) => {
-                    if actual != expect {
-                        return Err(
-							format!("expected {:?}; got {:?}", expect, actual)
-						);
-                    }
-                }
-            };
-        };
-    }
-
-    check_result!(Some(Opt('a', None)));
-    check_result!(Some(Opt('b', Some("c".to_string()))));
-    check_result!(Some(Opt('d', Some("foo".to_string()))));
-    check_result!(Some(Opt('e', None)));
-    check_result!(None);
-
-    Ok(())
-}
-
-#[test]
-fn continue_after_error() {
-    let args: Vec<String> = vec!["x", "-z", "-abc"]
-        .into_iter()
-        .map(String::from)
-        .collect();
-    let optstring = "ab:d:e".to_string();
-    for _opt in Parser::new(&args, &optstring) {
-        // do nothing, should not panic
-    }
-}

src/hru.rs

@@ -0,0 +1,134 @@
+/*
+ * Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+use std::{
+	cmp::Ordering,
+	env::args,
+	io::{ stdin, stdout, Write },
+	process::{ ExitCode, exit },
+};
+
+extern crate strerror;
+extern crate sysexits;
+
+use strerror::StrError;
+use sysexits::{ EX_DATAERR, EX_IOERR, EX_SOFTWARE, EX_USAGE };
+
+#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
+#[cfg(target_os="openbsd")] extern crate openbsd;
+#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
+
+/* list of SI prefixes */
+const LIST: [(u32, &str); 10] = [
+	(3, "k"), /* kilo */
+	(6, "M"), /* mega */
+	(9, "G"), /* giga */
+	(12, "T"), /* tera */
+	(15, "P"), /* peta */
+	(18, "E"), /* exa */
+	(21, "Z"), /* zetta */
+	(24, "Y"), /* yotta */
+	(27, "R"), /* ronna */
+	(30, "Q"), /* quetta */
+];
+
+fn convert(input: u128) -> Result<(f64, (u32, &'static str)), String> {
+	/* preserve decimal places in output by casting to a float */
+	let mut out = (input as f64, (0_u32, "")); 
+
+	if input < 1000 { return Ok(out); } /* too low to convert */
+
+	for (n, p) in LIST {
+		let c = match 10_u128.checked_pow(n) {
+			Some(c) => c,
+			None => { /* too big for the laws of computing :( */
+				return Err(format!("10^{}: Integer overflow", n.to_string()));
+			},
+		};
+
+		match c.cmp(&input) {
+			Ordering::Less => { /* c < input */
+				/* the program will keep assigning out every loop until either
+				 * the list runs out of higher prefix bases or the input is
+				 * greater than the prefix base */
+				out = (input as f64 / c as f64, (n, p));
+			},
+			Ordering::Equal => { /* c == input */
+				return Ok((input as f64 / c as f64, (n, p)));
+			},
+			Ordering::Greater => {}, /* c > input */
+		};
+	}
+
+	Ok(out)
+}
+
+fn main() -> ExitCode {
+	let argv = args().collect::<Vec<String>>();
+
+	if let Some(_) = argv.get(1) {
+		eprintln!("Usage: {}", argv[0]);
+		return ExitCode::from(EX_USAGE as u8);
+	}
+
+	#[cfg(target_os="openbsd")] {
+		let promises = Promises::new("stdio");
+		if let Err(e) = pledge(Some(promises), None) {
+			eprintln!("{}: {}", argv[0], e.strerror());
+			return ExitCode::from(EX_OSERR as u8);
+		}
+	}
+
+	let mut buf = String::new();
+
+	while let Ok(_) = stdin().read_line(&mut buf) {
+		if buf.is_empty() { return ExitCode::SUCCESS; }
+
+		let n: u128 = match buf.trim().parse() {
+			Ok(f) => {
+				buf.clear();
+				f
+			},
+			Err(err) => {
+				eprintln!("{}: {}", argv[0], err);
+				return ExitCode::from(EX_DATAERR as u8);
+			},
+		};
+
+		let (number, prefix) = match convert(n) {
+			Ok(x) => x,
+			Err(err) => {
+				eprintln!("{}: {}", argv[0], err);
+				return ExitCode::from(EX_SOFTWARE as u8);
+			},
+		};
+
+		let si_prefix = format!("{}B", prefix.1);
+
+		/* round output number to one decimal place */
+		let out = ((number * 10.0).round() / 10.0).to_string();
+
+		stdout().write_all(format!("{} {}\n", out, si_prefix).as_bytes())
+			.unwrap_or_else(|e| {
+				eprintln!("{}: {}", argv[0], e.strerror());
+				exit(EX_IOERR);
+			});
+	}
+
+	ExitCode::SUCCESS
+}

src/intcmp.c

@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2023 DTB <trinity@trinity.moe>
- * SPDX-License-Identifier: AGPL-3.0-or-later
- *
- * This program is free software: you can redistribute it and/or modify it under
- * the terms of the GNU Affero General Public License as published by the Free
- * Software Foundation, either version 3 of the License, or (at your option) any
- * later version.
- * 
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
- * details.
- *
- * You should have received a copy of the GNU Affero General Public License
- * along with this program. If not, see https://www.gnu.org/licenses/.
- */
-
-#include <errno.h> /* errno */
-#include <stdio.h> /* fprintf(3), stderr */
-#include <stdlib.h> /* strtol(3), size_t, EXIT_FAILURE */
-#include <unistd.h> /* getopt(3), optind */
-#include <sysexits.h>
-
-/* 0b00? */		/*                     Equal | -e  | 0b001 | 1 */
-#define EQUAL	0x01	/*                   Greater | -g  | 0b010 | 2 */
-/* 0b0?0 */		/*          Greater or Equal | -ge | 0b011 | 3 */
-#define GREATER	0x02	/*                      Less | -l  | 0b100 | 4 */
-/* 0b?00 */		/*             Less or Equal | -le | 0b101 | 5 */
-#define LESS	0x04	/* Inequal (Greater or Less) | -gl | 0b110 | 6 */
-
-static char *program_name = "intcmp";
-
-int main(int argc, char *argv[]){
-	int c;
-	size_t i;
-	unsigned char mode;
-	int r; /* reference integer */
-
-	mode = 0;
-
-	if(argc < 3)
-		goto usage;
-
-	while((c = getopt(argc, argv, "egl")) != -1)
-		switch(c){
-		case 'e': mode |= EQUAL;   break;
-		case 'g': mode |= GREATER; break;
-		case 'l': mode |= LESS;	   break;
-		default:  goto usage;
-		}
-
-	if(optind + 2 /* ref cmp */ > argc){
-usage:		fprintf(stderr,
-			"Usage: %s (-eghl) [integer] [integer...]\n",
-			argv[0] == NULL ? program_name : argv[0]);
-		return EX_USAGE;
-	}
-
-	i = optind;
-
-	do{	r = c;
-		c = strtol(argv[i], &argv[i], 10);
-		if(*argv[i] != '\0' || errno != 0){
-			fprintf(stderr, "%s: argument #%d: Invalid integer\n",
-				argv[0], (int)i);
-			return EX_USAGE;
-		}
-
-		if(i == optind)
-			continue;
-
-		/* rule enforcement; if a mode isn't permitted and the numbers
-		 * correspond to it, return 1 */
-		if(		(!(mode & EQUAL) && r == c)
-				|| (!(mode & GREATER) && r > c)
-				|| (!(mode & LESS) && r < c))
-			return 1;
-	}while(++i < argc);
-	
-	return 0;
-}

src/intcmp.rs

@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
+ * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+use std::{
+	env::args,
+	process::ExitCode
+};
+
+extern crate getopt;
+extern crate sysexits;
+
+use getopt::GetOpt;
+use sysexits::EX_USAGE;
+
+#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
+#[cfg(target_os="openbsd")] extern crate openbsd;
+#[cfg(target_os="openbsd")] extern crate strerror;
+#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
+#[cfg(target_os="openbsd")] use strerror::StrError;
+
+fn usage(s: &str) -> ExitCode {
+	eprintln!("Usage: {} [-egl] integer integer...", s);
+	ExitCode::from(EX_USAGE as u8)
+}
+
+fn main() -> ExitCode {
+	let argv = args().collect::<Vec<String>>();
+
+	#[cfg(target_os="openbsd")] {
+		let promises = Promises::new("stdio");
+		if let Err(e) = pledge(Some(promises), None) {
+			eprintln!("{}: {}", argv[0], e.strerror());
+			return ExitCode::from(EX_OSERR as u8);
+		}
+	}
+
+	let mut e = false; /* args can be == */
+	let mut g = false; /* args can be > */
+	let mut l = false; /* args can be < */
+	let mut optind = 0;
+
+	if argv.len() < 3 { return usage(&argv[0]); }
+
+	while let Some(opt) = argv.getopt("egl") {
+		match opt.opt() {
+			Ok("e") => e = true,
+			Ok("g") => g = true,
+			Ok("l") => l = true,
+			_ => return usage(&argv[0]),
+		}
+		optind = opt.ind();
+	}
+
+	if !e & !g & !l { return usage(&argv[0]); }
+
+	if argv.len() - optind < 2 /* see usage */ { return usage(&argv[0]); }
+
+	let mut prev: Option<usize> = None; /* no previous operand */
+	let mut currn: usize;
+
+	for arg in argv.iter().skip(optind) { /* iterate operands */
+		match arg.parse::<usize>() { /* parse current operand */
+			Ok(n) => currn = n,
+			Err(e) => {
+				eprintln!("{}: {}: {}", &argv[0], arg, e);
+				return ExitCode::from(EX_USAGE as u8);
+			}
+		}
+
+		if let Some(prevn) = prev { /* if there was a previous opr., test */
+			if (!e && prevn == currn)
+					|| (!g && prevn > currn)
+					|| (!l && prevn < currn)
+				{ return ExitCode::FAILURE; }
+		}
+
+		prev = Some(currn); /* there is a previous operand */
+	}
+
+	ExitCode::SUCCESS
+}

src/libgetopt.rs

@@ -0,0 +1,202 @@
+/*
+ * Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+use std::ffi::{ c_int, c_char, CString, CStr };
+
+/* binding to getopt(3p) */
+extern "C" {
+	static mut optarg: *mut c_char;
+	static mut _opterr: c_int;
+	static mut optind: c_int;
+	static mut optopt: c_int;
+
+	fn getopt(
+		___argc: c_int,
+		___argv: *const *mut c_char,
+		__shortopts: *const c_char,
+	) -> c_int;
+}
+
+#[derive(Clone, Debug)]
+pub enum OptError {
+	MissingArg(String),
+	UnknownOpt(String),
+}
+
+#[derive(Clone, Debug)]
+pub struct Opt {
+	arg: Option<String>, /* option argument */
+	ind: *mut i32, /* option index */
+	opt: Result<String, OptError>, /* option option */
+}
+
+impl Opt {
+	pub fn arg(&self) -> Option<String> { self.arg.clone() }
+
+	/* sets optarg if default is desired */
+	pub fn arg_or(&self, default: impl std::fmt::Display) -> String {
+		default.to_string()
+	}
+
+	/* makes matching the output of this method more bearable */
+	pub fn opt(&self) -> Result<&str, OptError> {
+		self.opt.as_ref().map(|o| o.as_str()).map_err(OptError::clone)
+	}
+
+	/* From getopt(3p):
+	 *
+	 * The variable optind is the index of the next element of the argv[]
+	 * vector to be processed. It shall be initialized to 1 by the system, and
+	 * getopt() shall update it when it finishes with each element of argv[].
+	 * If the application sets optind to zero  before calling getopt(), the
+	 * behavior is unspecified. When an element of argv[] contains multiple
+	 * option characters, it is unspecified how getopt() determines which
+	 * options have already been processed. */
+	pub fn ind(&self) -> usize { unsafe { *self.ind as usize } }
+
+	/* this is patently terrible and is only happening because I’m stubborn */
+	pub fn set_ind(&self, ind: i32) { unsafe { *self.ind = ind; } }
+}
+
+/* function signature */
+pub trait GetOpt {
+	fn getopt(&self, optstring: &str) -> Option<Opt>;
+}
+
+impl GetOpt for Vec<String> {
+    fn getopt(&self, optstring: &str) -> Option<Opt> {
+        let c_strings: Vec<_> = self
+			.iter()
+			.cloned()
+			.map(|x| CString::new(x).unwrap().into_raw())
+			.collect();
+
+		/* god knows what this does */
+		let boxed = Box::into_raw(c_strings.into_boxed_slice());
+		let argv = boxed as *const *mut c_char;
+
+		/* operations are separated out so that everything lives long enough */
+        let opts = CString::new(optstring).unwrap().into_raw();
+        let len = self.len() as c_int;
+
+        unsafe {
+            let ret = match getopt(len, argv, opts) { 
+				/* From getopt(3p):
+				 *
+				 * The getopt() function shall return the next option character
+				 * specified on the command line.
+				 *
+				 * A <colon> (':') shall be returned if getopt() detects a
+				 * missing argument and the first character of optstring was a
+				 * <colon> (':').
+				 *
+				 * A <question-mark> ('?') shall be returned if getopt()
+				 * encounters an option character not in optstring or detects a
+				 * missing argument and the first character of optstring was not
+				 * a <colon> (':').
+				 *
+				 * Otherwise, getopt() shall return -1 when all command line
+				 * options are parsed. */
+				58 => { /* ASCII ':' */
+					Some(Opt {
+						arg: None,
+						ind: std::ptr::addr_of_mut!(optind),
+						/* error containing option */
+						opt: Err(OptError::MissingArg(optopt.to_string())),
+					})
+				},
+				63 => { /* ASCII '?' */
+					Some(Opt {
+						arg: None,
+						ind: std::ptr::addr_of_mut!(optind),
+						/* error containing option */
+						opt: Err(OptError::UnknownOpt(optopt.to_string())),
+					})
+				},
+				/* From getopt(3p):
+				 *
+				 * If, when getopt() is called:
+				 *
+				 * argv[optind]  is a null pointer
+				 * *argv[optind]  is not the character -
+				 * argv[optind]  points to the string "-"
+				 *
+				 * getopt() shall return -1 without changing optind.  If:
+				 *
+				 * argv[optind]   points to the string "--"
+				 *
+				 * getopt() shall return -1 after incrementing optind. */
+                -1 => return None,
+                opt => {
+					let arg: Option<String>;
+
+					if optarg.is_null() { arg = None; }
+					else {
+						arg = Some(CStr::from_ptr(optarg)
+							.to_string_lossy()
+							.into_owned());
+					}
+
+					Some(Opt {
+						arg,
+						ind: std::ptr::addr_of_mut!(optind),
+						/* I didn’t need to cast this before; I rewrote the
+						 * pointer logic and now I do
+						 *
+						 * I don’t know why this is */
+						opt: Ok((opt as u8 as char).to_string()),
+					})
+				},
+            };
+
+			/* delloc argv (something online said I should do this) */
+			let _ = Box::from_raw(boxed);
+			return ret;
+        }
+    }
+}
+
+/* tests (good) */
+#[cfg(test)]
+mod tests {
+	use GetOpt;
+
+	#[test]
+	fn testing() {
+		let argv: Vec<String> = ["test", "-b", "-f", "arg", "-o", "arg"]
+			.iter()
+			.map(|s| s.to_string())
+			.collect();
+
+		while let Some(opt) = argv.getopt(":abf:o:") {
+			match opt.opt() {
+				Ok("a") => assert_eq!(opt.ind(), 1),
+				Ok("b") => assert_eq!(opt.ind(), 2),
+				Ok("f") | Ok("o") => {
+					assert_eq!(opt.arg(), Some("arg".into()));
+				},
+				_ => assert!(false),
+			};
+		}
+
+		if let Some(opt) = argv.getopt("abc:") {
+			opt.clone().set_ind(1);
+			assert_eq!(opt.ind(), 1);
+		}
+	}
+}

src/libopenbsd.rs

@@ -0,0 +1,97 @@
+/*
+ * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+use std::{
+	ffi::{ CString, c_char },
+	io::Error,
+	ptr::null,
+};
+
+mod openbsd {
+	use std::ffi::{ c_char, c_int };
+	extern "C" {
+		pub fn pledge(arg1: *const c_char, arg2: *const c_char) -> c_int;
+
+		pub fn unveil(arg1: *const c_char, arg2: *const c_char) -> c_int;
+
+		pub fn __errno() -> *mut c_int;
+	}
+}
+
+pub struct Promises(*const c_char);
+
+impl Promises {
+	pub fn new(promises: &str) -> Self {
+		let p = CString::new(promises).unwrap();
+
+		Promises(p.into_raw() as *const c_char)
+	}
+}
+
+pub fn pledge(
+	promises: Option<Promises>, execpromises: Option<Promises>
+) -> Result<(), Error> {
+	/* From pledge(2):
+	 *
+	 * Passing NULL to promises or execpromises specifies to not change
+	 * the current value. */
+	let arg1 = promises.unwrap_or(Promises(null())).0;
+	let arg2 = execpromises.unwrap_or(Promises(null())).0;
+
+	unsafe {
+		match openbsd::pledge(arg1, arg2) {
+			-1 => Err(Error::from_raw_os_error(*openbsd::__errno())),
+			0 => Ok(()),
+			_ => panic!(), /* unreachable */
+		}
+	}
+}
+
+pub struct UnveilPerms(CString);
+
+impl UnveilPerms {
+	pub fn new(permissions: Vec<char>) -> Self {
+		if permissions.is_empty() {
+			return UnveilPerms(CString::new("").unwrap());
+		}
+
+		UnveilPerms(
+			CString::new(permissions.iter().collect::<String>()).unwrap()
+		)
+	}
+}
+
+pub fn unveil(
+	path: Option<&str>,
+	permissions: Option<UnveilPerms>,
+) -> Result<(), Error> {
+	let path_c = path.map(CString::new).map(Result::unwrap);
+	let arg1 = path_c.map(|p| p.into_raw() as *const c_char).unwrap_or(null());
+
+	let arg2 = permissions
+		.map(|p| p.0.into_raw() as *const c_char)
+		.unwrap_or(null());
+
+	unsafe {
+		match openbsd::unveil(arg1, arg2) {
+			-1 => Err(Error::from_raw_os_error(*openbsd::__errno())),
+			0 => Ok(()),
+			_ => panic!(), /* unreachable */
+		}
+	}
+}

src/libstrerror.rs

@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: FSFAP
+ *
+ * Copying and distribution of this file, with or without modification, are
+ * permitted in any medium without royalty provided the copyright notice and
+ * this notice are preserved.  This file is offered as-is, without any warranty.
+ */
+
+use std::ffi::{ c_int, c_char, CStr };
+
+pub trait StrError { fn strerror(&self) -> String; }
+
+impl StrError for std::io::Error {
+	/* wrapper function for use in Rust */
+	fn strerror(&self) -> String {
+		/* Get the raw OS error. If it’s None, what the hell is going on‽ */
+		let errno = self.raw_os_error().unwrap_or(0) as c_int;
+
+		/* Get a CStr from the error message so that it’s referenced and then
+		 * convert it to an owned value. If the string is not valid UTF-8,
+		 * return that error instead. */
+		match unsafe { CStr::from_ptr(strerror(errno)) }.to_str() {
+			Ok(s) => s.to_owned(), // yay!! :D
+			Err(e) => e.to_string(), // awww :(
+		}
+	}
+}
+
+/* binding to strerror(3p) */
+extern "C" { fn strerror(errnum: c_int) -> *mut c_char; }

src/mm.rs

@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+ * Copyright (c) 2024 DTB <trinity@trinity.moe>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+use std::{
+	env::args,
+	fs::File,
+	io::{ stdin, stdout, stderr, BufWriter, Read, Write },
+	os::fd::{ AsRawFd, FromRawFd },
+	process::{ exit, ExitCode },
+};
+
+extern crate getopt;
+extern crate strerror;
+extern crate sysexits;
+
+use getopt::GetOpt;
+use strerror::StrError;
+use sysexits::{ EX_IOERR, EX_USAGE };
+
+#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
+#[cfg(target_os="openbsd")] extern crate openbsd;
+#[cfg(target_os="openbsd")]
+use openbsd::{
+	Promises,
+	UnveilPerms,
+	pledge,
+	unveil,
+};
+
+use ArgMode::*;
+
+enum ArgMode { In, Out }
+
+fn main() -> ExitCode {
+	let argv = args().collect::<Vec<_>>();
+	let usage = format!("Usage: {} [-aetu] [-i input] [-o output]", argv[0]);
+
+	#[cfg(target_os="openbsd")] {
+		let promises = Promises::new("cpath rpath stdio unveil wpath");
+		if let Err(e) = pledge(Some(promises), None) {
+			eprintln!("{}: {}", argv[0], e.strerror());
+			return ExitCode::from(EX_OSERR as u8);
+		}
+	}
+
+	let mut a = false; /* append to the file */
+	let mut e = false; /* use stderr as an output */
+	let mut t = true; /* do not truncate the file before writing */
+	let mut u = false; /* unbuffer i/o */
+	let mut ins = Vec::new(); /* initial input file path vector */
+	let mut outs = Vec::new(); /* initial output file path vector */
+	let mut mode: Option<ArgMode> = None; /* mode set by last-used option */
+	let mut optind = 0;
+
+	while let Some(opt) = argv.getopt("aei:o:tu") {
+		match opt.opt() {
+			Ok("a") => a = true,
+			Ok("e") => e = true, 
+			Ok("u") => u = true,
+			Ok("t") => t = false,
+			Ok("i") => { /* add inputs */
+				let input = opt.arg().unwrap();
+				ins.push(input);
+				mode = Some(In); /* latest argument == -i */
+			},
+			Ok("o") => { /* add output */
+				let output = opt.arg().unwrap();
+				outs.push(output);
+				mode = Some(Out); /* latest argument == -o */
+			},
+			Err(_) | Ok(_) => {
+				eprintln!("{}", usage);
+				return ExitCode::from(EX_USAGE as u8);
+			},
+		};
+
+		optind = opt.ind();
+	}
+
+	let remaining = argv.iter().skip(optind);
+
+	/* check the last flag specified */
+	if let Some(m) = mode {
+		for arg in remaining {
+			/* move the subsequent arguments to the list of inputs or outputs */
+			match m {
+				In => ins.push(arg.to_string()),
+				Out => outs.push(arg.to_string()),
+			};
+		}
+	}
+
+	#[cfg(target_os="openbsd")] {
+		for input in &ins {
+			let perms = UnveilPerms::new(vec!['r']);
+
+			if let Err(e) = unveil(Some(&input), Some(perms)) {
+				eprintln!("{}: {}", argv[0], e.strerror());
+				return ExitCode::from(EX_OSERR as u8);
+			}
+		}
+
+		for output in &outs {
+			let perms = UnveilPerms::new(vec!['c', 'w']);
+
+			if let Err(e) = unveil(Some(&output), Some(perms)) {
+				eprintln!("{}: {}", argv[0], e.strerror());
+				return ExitCode::from(EX_OSERR as u8);
+			}
+		}
+
+		if let Err(e) = unveil(None, None) {
+			eprintln!("{}: {}", argv[0], e.strerror());
+			return ExitCode::from(EX_OSERR as u8);
+		}
+	}
+
+	if ins.is_empty() && outs.is_empty() && argv.len() > optind {
+		eprintln!("Usage: {}", usage);
+		return ExitCode::from(EX_USAGE as u8);
+	}
+
+	/* use stdin if no inputs are specified */
+	if ins.is_empty() { ins.push("-".to_string()); }
+
+	/* use stdout if no outputs are specified */
+	if outs.is_empty() && !e { outs.push("-".to_string()); }
+	
+	/* map all path strings to files */
+	let inputs = ins.iter().map(|file| {
+		/* if a file is “-”, it is stdin */
+		if *file == "-" {
+			/* portable way to access stdin as a file */
+			return unsafe { File::from_raw_fd(stdin().as_raw_fd()) };
+		}
+
+		match File::open(file) {
+			Ok(f) => f,
+			Err(e) => {
+				eprintln!("{}: {}: {}", argv[0], file, e.strerror());
+				exit(EX_IOERR);
+			},
+		}
+	}).collect::<Vec<_>>();
+
+	/* map all path strings to files */
+	let mut outputs = outs.iter().map(|file| {
+		/* of a file is “-”, it is stdout */
+		if *file == "-" {
+			/* portable way to access stdout as a file */
+			return unsafe { File::from_raw_fd(stdout().as_raw_fd()) }; 
+		}
+
+		let options = File::options()
+			/* don’t truncate if -t is specified, append if -a is specified */
+			.truncate(t)
+			.append(a)
+			/* enable the ability to create and write to files */
+			.create(true)
+			.write(true)
+			/* finally, open the file! */
+			.open(file);
+
+		match options {
+			Ok(f) => return f,
+			Err(e) => {
+				eprintln!("{}: {}: {}", argv[0], file, e.strerror());
+				exit(EX_IOERR);
+			},
+		};
+	}).collect::<Vec<_>>();
+
+	/* if -e is specified, use stderr */
+	if e {
+		/* portable way to access stderr as a file */
+		outputs.push(unsafe { File::from_raw_fd(stderr().as_raw_fd()) });
+	}
+
+	let mut outputs = outputs.iter().map(|o| {
+		if u {
+			/* unbuffered writing through a buffer of capacity 0 */
+			BufWriter::with_capacity(0, o)
+		} else {
+			/* theoretically buffered writing */
+			BufWriter::new(o)
+		}
+	}).collect::<Vec<_>>();
+
+	for file in inputs {
+		for byte in file.bytes().map(|b| {
+			b.unwrap_or_else(|e| {
+				eprintln!("{}: {}", argv[0], e.strerror());
+				exit(EX_IOERR);
+			})
+		}) {
+			for out in &mut outputs {
+				if let Err(e) = out.write(&[byte]) {
+					eprintln!("{}: {}", argv[0], e.strerror());
+					return ExitCode::from(EX_IOERR as u8);
+				}
+
+				if u {
+					/* immediately flush the output for -u */
+					if let Err(e) = out.flush() { 
+						eprintln!("{}: {}", argv[0], e.strerror());
+						return ExitCode::from(EX_IOERR as u8);
+					}
+				}
+			}
+		}
+	}
+
+	ExitCode::SUCCESS
+}

src/npc.c

@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2023 DTB <trinity@trinity.moe>
+ * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
  * SPDX-License-Identifier: AGPL-3.0-or-later
  *
  * This program is free software: you can redistribute it and/or modify it under
@@ -16,46 +17,72 @@
  * along with this program. If not, see https://www.gnu.org/licenses/.
  */
 
-#include <stdio.h> /* fprintf(3), fputs(3), getc(3), putc(3), stdin, stdout,
-                    * EOF */
-#include <stdlib.h> /* EXIT_FAILURE, EXIT_SUCCESS */
-#include <unistd.h> /* getopt(3) */
-#include <sysexits.h>
+#include <stdio.h> /* fprintf(3), fputs(3), getc(3), perror(3), putc(3), stdin,
+                    * stdout, EOF */
+#include <sysexits.h> /* EX_IOERR, EX_OK, EX_OSERR, EX_USAGE */
+#include <unistd.h> /* pledge(2), getopt(3) */
 
-int main(int argc, char *argv[]){
+char *program_name = "npc";
+
+static int
+ioerr(char *argv0) {
+	perror(argv0);
+
+	return EX_IOERR;
+}
+
+static int
+usage(char *argv0) {
+	(void)fprintf(stderr, "Usage: %s [-et]\n", argv0);
+
+	return EX_USAGE;
+}
+
+int main(int argc, char *argv[]) {
 	int c;
-	char showend;
-	char showtab;
+	char showend = 0; /* print a dollar sign before each newline */
+	char showtab = 0; /* prints tab characters in caret notation */
 
-	showend = 0;
-	showtab = 0;
+#ifdef __OpenBSD__
+	if (pledge("stdio", NULL) == -1) {
+		perror(argv[0] == NULL ? program_name : argv[0]);
+		return EX_OSERR;
+	}
+#endif
 
-	if(argc > 0)
-		while((c = getopt(argc, argv, "et")) != -1)
-			switch(c){
-			case 'e':	showend = 1; break;
-			case 't':	showtab = 1; break;
-			default:	goto usage;
+	if (argc > 0) {
+		program_name = argv[0];
+
+		while ((c = getopt(argc, argv, "et")) != -1) {
+			switch (c){
+				case 'e': showend = 1; break;
+				case 't': showtab = 1; break;
+				default:  return usage(program_name);
 			}
-
-	if(argc > optind){
-usage:		fprintf(stderr, "Usage: %s (-eht)\n", argv[0]);
-		return EX_USAGE;
+		}
 	}
 
-	while((c = getc(stdin)) != EOF){
-		if((c & 0x80) != 0)
-			fputs("M-", stdout);
-		switch(c ^ 0x80 /* 0b 1000 0000 */){
-		case 0x7f:	fputs("^?", stdout);
+	if (argc > optind) { return usage(program_name); }
+
+	while ((c = getc(stdin)) != EOF) {
+		if ((c & 0x80) != 0 && fputs("M-", stdout) == EOF) {
+			return ioerr(argv[0]);
+		}
+
+		switch (c ^ 0x80 /* 0b 1000 0000 */) {
+			case 0x7f: /* ASCII DEL (127d) */
+				if(fputs("^?", stdout) == EOF) { return ioerr(argv[0]); }
 				break;
-		case '\n':	if(showend)
-					putc('$', stdout);
-		default:
-			if(c >= ' ' || c == '\n' || (!showtab && c == '\t'))
-				putc(c, stdout);
-			else
-				fprintf(stdout, "^%c", c + '@');
+			case '\n':
+				if (showend && fputc('$', stdout) == EOF) {
+					return ioerr(argv[0]);
+				}
+			default:
+				if (c >= ' ' || c == '\n' || (!showtab && c == '\t')) {
+					if (fputc(c, stdout) == EOF) { return ioerr(argv[0]); }
+				} else if (fprintf(stdout, "^%c", c + '@') < 0) {
+					return ioerr(argv[0]);
+				}
 		}
 	}
 

src/peek.c

@@ -0,0 +1,147 @@
+/*
+ * Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+#include <signal.h> /* sigaction(2), signal(2), struct sigaction, SIGINT */
+#include <stdbool.h> /* bool */
+#include <stdio.h> /* fprintf(3), fgetc(3), perror(3), fputc(3), stderr, stdin,
+                    * stdout, EOF, NULL */
+#include <stdlib.h> /* exit(3), EXIT_FAILURE */
+#include <sysexits.h> /* EX_IOERR, EX_OK, EX_USAGE */
+#include <termios.h> /* tcgetattr(3), tcsetattr(3), struct termios, ECHO */
+#include <unistd.h> /* getopt(3), isatty(3), pledge(2), unveil(2),
+                     * STDIN_FILENO */
+
+char *program_name = "peek";
+
+/* Restores terminal echo; otherwise when a user ^Cs the terminal would
+ * continue to not display typed text. If sig isn't zero, this will terminate
+ * the program. */
+static void
+restore_echo(int sig) {
+	static struct termios t;
+
+	/* Failure isn't reported because this is the termination routine anyway;
+	 * errors will be obvious. */
+	if (tcgetattr(STDIN_FILENO, &t) == 0) {
+		t.c_lflag |= ECHO;
+		(void)tcsetattr(STDIN_FILENO, TCSAFLUSH, &t);
+	}
+
+	if (sig != 0) { exit(EXIT_FAILURE); } /* Terminated by signal. */
+
+	return;
+}
+
+static int
+ioerr(char *argv0) {
+	perror(argv0);
+	restore_echo(0);
+	return EX_IOERR;
+}
+
+static int
+usage(char *argv0) {
+	(void)fprintf(stderr, "Usage: %s [-i]\n", argv0);
+
+	return EX_USAGE;
+}
+
+int main(int argc, char *argv[]){
+	bool is_term; /* Is stdin a terminal? */
+	bool must_be_term = 1; /* Must it be? */
+
+#ifdef __OpenBSD__
+	if (pledge("stdio tty unveil", "") != 0 || unveil(NULL, NULL) != 0) {
+		/* This isn't fatal; these return values could be cast to void just as
+		 * easily. */
+		(void)perror(argv[0] == NULL ? argv[0] : program_name);
+	}
+#endif
+
+	is_term = isatty(STDIN_FILENO);
+
+	if (argc > 0) { /* option parsing */
+		int c;
+
+		program_name = argv[0];
+
+		while ((c = getopt(argc, argv, "i")) != -1) {
+			switch (c) {
+				case 'i':	must_be_term = 0; break;
+				default:	return usage(argv[0]);
+			}
+		}
+
+		if (argc > optind) { return usage(argv[0]); }
+	}
+
+	if (!is_term && must_be_term) {
+		(void)fprintf(
+		    stderr,
+		    "%s: Must be run in a terminal (specify -i to skip this check)\n",
+		    argv[0]
+		);
+		return EX_USAGE;
+	}
+
+	if (is_term) {
+		{ /* Install signal handler */
+			/* There isn't a difference in functionality between the signal(2)
+			 * and sigaction(2) methods. sigaction(2) is vastly preferred for
+			 * portability but some older systems only have signal(2). */
+			/* Errors aren't terminating because the worst that happens is some
+			 * terminal phooeyness if things go awry. */
+#if defined _POSIX_C_SOURCE
+			struct sigaction act = { 0 };
+
+			act.sa_handler = restore_echo;
+			if (sigaction(SIGINT, &act, NULL) != 0) { perror(program_name); }
+#else
+			if (signal(SIGINT, restore_echo) == SIG_ERR) {
+				perror(program_name);
+			}
+#endif
+		}
+
+		{ /* Banish terminal echo */
+			/* This terminates when it fails because it's the whole point of
+			 * the program. */
+			struct termios t;
+
+			if (tcgetattr(STDIN_FILENO, &t) != 0) {
+				return ioerr(program_name);
+			}
+			t.c_lflag ^= ECHO;
+			if (tcsetattr(STDIN_FILENO, TCSAFLUSH, &t) != 0) {
+				return ioerr(program_name);
+			}
+		}
+	}
+
+	{ /* Input loop */
+		int c;
+
+		while ((c = fgetc(stdin)) != EOF) {
+			if (fputc(c, stdout) == EOF) { return ioerr(program_name); }
+		}
+	}
+
+	if (is_term) { restore_echo(0); }
+
+	return EX_OK;
+}

src/rpn.rs

@@ -56,8 +56,14 @@ extern crate sysexits;
 
 use sysexits::EX_DATAERR;
 
+#[cfg(target_os="openbsd")] use sysexits::EX_OSERR;
+#[cfg(target_os="openbsd")] extern crate strerror;
+#[cfg(target_os="openbsd")] extern crate openbsd;
+#[cfg(target_os="openbsd")] use strerror::StrError;
+#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
+
 #[derive(Clone, PartialEq, PartialOrd, Debug)]
-// enum CalcType is a type containing operations used in the calculator
+/* enum CalcType is a type containing operations used in the calculator */
 enum CalcType {
 	Add,
 	Subtract,
@@ -117,8 +123,8 @@ struct EvaluationError {
 	code: i32,
 }
 
-// I’m no math nerd but I want the highest possible approximation of 0.9
-// repeating and it seems this can give it to me
+/* I’m no math nerd but I want the highest possible approximation of 0.9
+ * repeating and it seems this can give it to me */
 const PRECISION_MOD: f64 = 0.9 + f64::EPSILON * 100.0;
 
 fn eval(
@@ -133,7 +139,7 @@ fn eval(
 		return Ok((stack, oper));
 	}
 
-	// Split the input into tokens.
+	/* Split the input into tokens. */
 	let mut toks: VecDeque<CalcType> = input
 		.split_whitespace()
 		.rev()
@@ -172,7 +178,7 @@ fn eval(
 					};
 				} else {
 					return Err(EvaluationError {
-						message: format!("{}: Unexpected operation.", op),
+						message: format!("{}: Unexpected operation", op),
 						code: EX_DATAERR,
 					})
 				}
@@ -183,7 +189,7 @@ fn eval(
 	Ok((stack, oper))
 }
 
-// Round a float to the given precision level
+/* Round a float to the given precision level */
 fn round_precise(value: &f64, precision: usize) -> f64 {
 	let multiplier = 10_f64.powi(precision as i32);
 	(value * multiplier).round() / multiplier
@@ -191,13 +197,22 @@ fn round_precise(value: &f64, precision: usize) -> f64 {
 
 fn main() -> ExitCode {
 	let argv = args().collect::<Vec<String>>();
+
+	#[cfg(target_os="openbsd")] {
+		let promises = Promises::new("stdio");
+		if let Err(e) = pledge(Some(promises), None) {
+			eprintln!("{}: {}", argv[0], e.strerror());
+			return ExitCode::from(EX_OSERR as u8);
+		}
+	}
+
 	let mut stack = VecDeque::new();
 	let mut buf = String::new();
-	// Set floating-point precision for correcting rounding errors based on
-	// machine epsilon
+	/* Set floating-point precision for correcting rounding errors based on
+	 * machine epsilon */
 	let precision = (-f64::EPSILON.log10() * PRECISION_MOD).ceil() as usize;
 	
-	if argv.get(1).is_none() {
+	if argv.get(1).is_none() { /* read from stdin */
 		while let Ok(_) = stdin().read_line(&mut buf) {
 			match eval(&buf.trim(), stack) {
 				Ok(s) => {
@@ -219,12 +234,13 @@ fn main() -> ExitCode {
 				},
 			};
 		}
-	} else {
+	} else { /* read from argv */
+		/* join argv into an owned String joined by spaces minus argv[0] */
 		let input = argv
 			.iter()
 			.skip(1)
 			.map(|x| x.to_owned())
-			.collect::<Vec<String>>()
+			.collect::<Vec<_>>()
 			.join(" ");
 
 		match eval(&input, stack) {
@@ -233,7 +249,7 @@ fn main() -> ExitCode {
 
 				let val = match stack.iter().last() {
 					Some(v) => v,
-					None => return ExitCode::from(0),
+					None => return ExitCode::SUCCESS,
 				};
 
 				println!("{}", round_precise(val, precision).to_string())
@@ -244,5 +260,5 @@ fn main() -> ExitCode {
 			},
 		};
 	}
-	ExitCode::from(0)
+	ExitCode::SUCCESS
 }

src/scrut.c

@@ -1,5 +1,6 @@
 /*
- * Copyright (c) 2023 DTB <trinity@trinity.moe>
+ * Copyright (c) 2023–2024 DTB <trinity@trinity.moe>
+ * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
  * SPDX-License-Identifier: AGPL-3.0-or-later
  *
  * This program is free software: you can redistribute it and/or modify it under
@@ -16,89 +17,100 @@
  * along with this program. If not, see https://www.gnu.org/licenses/.
  */
 
+#include <assert.h> /* assert(3) */
 #include <stdio.h> /* fprintf(3), stderr, NULL */
-#include <stdlib.h> /* EXIT_FAILURE */
+#include <stdlib.h> /* EXIT_FAILURE, EXIT_SUCCESS */
 #include <string.h> /* memset(3), strchr(3) */
-#include <unistd.h> /* access(3), getopt(3), F_OK, R_OK, W_OK, X_OK */
+#include <sysexits.h> /* EX_OSERR, EX_USAGE */
+#include <unistd.h> /* access(3), getopt(3), pledge(2), unveil(2), F_OK, R_OK,
+					 * W_OK, X_OK */
 #include <sys/stat.h> /* lstat(3), stat struct, S_ISBLK, S_ISCHR, S_ISDIR,
                        * S_ISFIFO, S_ISGID, S_ISREG, S_ISLNK, S_ISSOCK,
                        * S_ISUID, S_ISVTX */
-#include <sysexits.h>
 
-static char args[] = "bcdefghkprsuwxLS";
-static char ops[(sizeof args) / (sizeof *args)];
-static char *program_name = "scrut";
+char *program_name = "scrut";
+#define OPTS "bcdefgkprsuwxLS"
+/* this is an array so main:sel's size can be known at compile time */
+static char opts[] = OPTS;
 
-int main(int argc, char *argv[]){
-	struct stat buf;
-	int c;
-	size_t i;
-	char *p;
+static int
+usage(char *argv0) {
+	(void)fprintf(stderr, "Usage: %s [-" OPTS "] file...\n", argv0);
 
-	if(argc < 2)
-		goto usage;
+	return EX_USAGE;
+}
 
-	memset(ops, '\0', sizeof ops);
-	while((c = getopt(argc, argv, args)) != -1)
-		if((p = strchr(args, c)) == NULL)
-			goto usage;
-		else
-			ops[p - args] = c;
-	/* straighten out ops */
-	for(i = 0, p = ops; i < (sizeof ops) / (sizeof *ops); ++i)
-		if(ops[i] != '\0'){
-			*p = ops[i];
-			if(&ops[i] != p++)
-				ops[i] = '\0';
+int main(int argc, char *argv[]) {
+	char sel[(sizeof opts) / (sizeof *opts)];
+
+	program_name = argv[0] == NULL ? program_name : argv[0];
+
+#ifdef __OpenBSD__
+	if (pledge("rpath stdio unveil", NULL) == -1) {
+		perror(program_name);
+		return EX_OSERR;
+	}
+#endif
+
+	if (argc < 2) { return usage(program_name); }
+
+	{ /* option parsing */
+		char *p;
+
+		memset(sel, '\0', sizeof sel);
+		for (int c; (c = getopt(argc, argv, opts)) != -1;) {
+			if ((p = strchr(opts, c)) == NULL) { return usage(argv[0]); }
+			else {
+				assert(p - opts < sizeof sel / sizeof *sel); /* bounds check */
+				sel[p - opts] = c;
+			}
 		}
 
-	if(optind == argc)
-		goto usage;
+		/* straighten out selections; permute out nulls */
+		p = sel;
+		for (size_t i = 0; i < (sizeof sel) / (sizeof *sel); ++i) {
+			if (sel[i] != '\0') {
+				*p = sel[i];
+				if (&sel[i] != p++) { sel[i] = '\0'; }
+			}
+		}
+	}
 
-	argv += optind;
-	do{	if(access(*argv, F_OK) != 0 || lstat(*argv, &buf) == -1)
-			return 1; /* doesn't exist or isn't stattable */
+	if (optind == argc) { return usage(argv[0]); }
 
-		for(i = 0; ops[i] != '\0'; ++i)
-			if(ops[i] == 'e')
-				continue;
-			else if(ops[i] == 'h'){
-usage:				fprintf(stderr, "Usage: %s (-%s) [file...]\n",
-					argv[0] == NULL
-						? program_name
-						: argv[0],
-					args);
+	for (argv += optind ; *argv != NULL; argv = &argv[1]) {
+		struct stat buf;
 
-				return EX_USAGE;
-			}else if(
-					(ops[i] == 'b'
-						&& !S_ISBLK(buf.st_mode))
-					|| (ops[i] == 'c'
-						&& !S_ISCHR(buf.st_mode))
-					|| (ops[i] == 'd'
-						&& !S_ISDIR(buf.st_mode))
-					|| (ops[i] == 'f'
-						&& !S_ISREG(buf.st_mode))
-					|| (ops[i] == 'g'
-						&& !(buf.st_mode & S_ISGID))
-					|| (ops[i] == 'k'
-						&& !(buf.st_mode & S_ISVTX))
-					|| (ops[i] == 'p'
-						&& !S_ISFIFO(buf.st_mode))
-					|| (ops[i] == 'r'
-						&& access(*argv, R_OK) != 0)
-					|| (ops[i] == 'u'
-						&& !(buf.st_mode & S_ISUID))
-					|| (ops[i] == 'w'
-						&& access(*argv, W_OK) != 0)
-					|| (ops[i] == 'x'
-						&& access(*argv, X_OK) != 0)
-					|| (ops[i] == 'L'
-						&& !S_ISLNK(buf.st_mode))
-					|| (ops[i] == 'S'
-						&& !S_ISSOCK(buf.st_mode)))
-				return 1;
-	}while(*++argv != NULL);
+#ifdef __OpenBSD__
+		if (unveil(*argv, "r") == -1) {
+			perror(program_name);
+			return EX_OSERR;
+		}
+#endif
 
-	return 0;
+		if(access(*argv, F_OK) != 0 || lstat(*argv, &buf) == -1) {
+			return EXIT_FAILURE; /* doesn't exist or isn't stattable */
+		}
+
+		for (size_t i = 0; sel[i] != '\0'; ++i) {
+			if (
+					(sel[i] == 'b' && !S_ISBLK(buf.st_mode))
+					|| (sel[i] == 'c' && !S_ISCHR(buf.st_mode))
+					|| (sel[i] == 'd' && !S_ISDIR(buf.st_mode))
+					|| (sel[i] == 'e' && 0)
+					|| (sel[i] == 'f' && !S_ISREG(buf.st_mode))
+					|| (sel[i] == 'g' && !(buf.st_mode & S_ISGID))
+					|| (sel[i] == 'k' && !(buf.st_mode & S_ISVTX))
+					|| (sel[i] == 'p' && !S_ISFIFO(buf.st_mode))
+					|| (sel[i] == 'r' && access(*argv, R_OK) != 0)
+					|| (sel[i] == 'u' && !(buf.st_mode & S_ISUID))
+					|| (sel[i] == 'w' && access(*argv, W_OK) != 0)
+					|| (sel[i] == 'x' && access(*argv, X_OK) != 0)
+					|| (sel[i] == 'L' && !S_ISLNK(buf.st_mode))
+					|| (sel[i] == 'S' && !S_ISSOCK(buf.st_mode))
+			) { return EXIT_FAILURE; }
+		}
+	}
+
+	return EXIT_SUCCESS;
 }

src/str.c

@@ -19,17 +19,21 @@
 
 #include <ctype.h>
 #include <stddef.h> /* NULL */
-#include <stdio.h> /* fprintf(3) */
-#include <stdlib.h> /* EXIT_FAILURE */
+#include <stdio.h> /* fprintf(3), perror(3) */
+#include <stdlib.h> /* size_t, EXIT_FAILURE */
 #include <string.h> /* strcmp(3) */
-#include <sysexits.h>
+#include <sysexits.h> /* EX_OSERR, EX_USAGE */
 
-static char *program_name = "str";
+#ifdef __OpenBSD__
+#	include <unistd.h> /* pledge(2) */
+#endif
+
+char *program_name = "str";
 
 static struct {
 	char *name;
 	int (*f)(int);
-}ctypes[] = {
+} ctypes[] = {
 	{ "isalnum", isalnum },
 	{ "isalpha", isalpha },
 	{ "isblank", isblank },
@@ -41,35 +45,52 @@ static struct {
 	{ "isprint", isprint },
 	{ "ispunct", ispunct },
 	{ "isspace", isspace },
-	{ "isupper", isupper }
+	{ "isupper", isupper },
+	{ NULL, NULL } /* marks end */
 };
 
-int main(int argc, char *argv[]){
-	int ctype;
-	int i;
-	int r;
-
-	if(argc >= 3){
-		for(ctype = 0; ctype < (sizeof ctypes) / (sizeof *ctypes);
-				++ctype)
-			if(strcmp(argv[1], ctypes[ctype].name) == 0)
-				goto pass;
-	}
-
-	fprintf(stderr, "Usage: %s [type] [string...]\n",
-		argv[0] == NULL ? program_name : argv[0]);
+static int
+usage(char *argv0) {
+	(void)fprintf(stderr, "Usage: %s type string...\n", argv0);
 
 	return EX_USAGE;
-
-pass:	for(argv += 2, r = 1; *argv != NULL; ++argv)
-		for(i = 0; argv[0][i] != '\0'; ++i)
-			/* First checks if argv[0][i] is valid ASCII; ctypes(3)
-			 * don't handle non-ASCII.
-			 * This is bad. */
-			if((unsigned char)argv[0][i] < 0x80 && !ctypes[ctype].f(argv[0][i]))
-				return 1;
-			else
-				r = 0;
-
-	return r;
+}
+
+int main(int argc, char *argv[]) {
+	size_t ctype; // selected from ctypes.h; index of ctype
+	int retval; // initially fail but becomes success on the first valid char
+	program_name = argv[0] == NULL ? program_name : argv[0];
+
+#ifdef __OpenBSD__
+	if (pledge("stdio", NULL) == -1) {
+		perror(program_name);
+		return EX_OSERR;
+	}
+#endif
+
+	if (argc < 3) { return usage(program_name); }
+
+	for ( /* iterate ctypes */
+		ctype = 0;
+		ctypes[ctype].f != NULL /* break at the end of ctypes */
+			&& strcmp(argv[1], ctypes[ctype].name) != 0; /* break at match */
+		++ctype
+	);
+
+	if (ctypes[ctype].f == NULL) { return usage(argv[0]); }
+
+	/* iterate args */
+	for (argv += 2, retval = EXIT_FAILURE; *argv != NULL; ++argv) {
+		for (size_t i = 0; argv[0][i] != '\0'; ++i) { /* iterate arg bytes */
+			/* First checks if argv[0][i] is valid ASCII; ctypes(3) don't
+			 * handle non-ASCII. This is bad. */
+			if(
+				(unsigned char)argv[0][i] < 0x80 // argv[0][i] is ASCII,
+					&& !ctypes[ctype].f(argv[0][i]) // so use ctypes(3)
+			) { return EXIT_FAILURE; }
+			else { retval = EXIT_SUCCESS; }
+		}
+	}
+
+	return retval;
 }

src/strcmp.c

@@ -1,24 +1,62 @@
-#include <stdio.h> /* fprintf(3), stderr */
-#include <stdlib.h> /* EXIT_FAILURE */
-#include <sysexits.h>
+/*
+ * Copyright (c) 2023 DTB <trinity@trinity.moe>
+ * Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+#include <stdio.h> /* fprintf(3), perror(3), stderr */
+#include <sysexits.h> /* EX_OK, EX_OSERR, EX_USAGE */
 
-static char *program_name = "strcmp";
+#ifdef __OpenBSD__
+#	include <unistd.h> /* pledge(2) */
+#endif
 
-int main(int argc, char *argv[]){
-	int i;
+char *program_name = "strcmp";
+
+int main(int argc, char *argv[]) {
+	unsigned int i;
+
+#ifdef __OpenBSD__
+	if (pledge("stdio", NULL) == -1) {
+		perror(argv[0] == NULL ? program_name : argv[0]);
+
+		return EX_OSERR;
+	}
+#endif
+
+	if (argc < 3) {
+		(void)fprintf(
+			stderr,
+			"Usage: %s string string...\n",
+			argv[0] == NULL ? program_name : argv[0]
+		);
 
-	if(argc < 3){
-		fprintf(stderr, "Usage: %s [string] [string...]\n",
-			argv[0] == NULL ? program_name : argv[0]);
 		return EX_USAGE;
 	}
 
-	for(; *argv[1] != '\0'; ++argv[1])
-		for(i = 2; i < argc; ++i)
-			if(*argv[i-1] > *argv[i])
+	for (; *argv[1] != '\0'; ++argv[1]) {
+		for (i = 2; i < argc; ++i) {
+			/* a former string has a greater byte value */
+			if (*argv[i-1] > *argv[i]) { 
 				return 1;
-			else if(*argv[i-1] < *argv[i]++)
+			/* a latter string has a greater byte value */
+			} else if (*argv[i-1] < *argv[i]++) {
 				return -1; /* actually 255 */
+			}
+		}
+	}
 
-	return 0;
+	return EX_OK;
 }

src/swab.rs

@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2024 DTB <trinity@trinity.moe>
+ * Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+ * SPDX-License-Identifier: AGPL-3.0-or-later
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU Affero General Public License as published by the Free
+ * Software Foundation, either version 3 of the License, or (at your option) any
+ * later version.
+ * 
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU Affero General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU Affero General Public License
+ * along with this program. If not, see https://www.gnu.org/licenses/.
+ */
+
+use std::{
+	env::args,
+	io::{ stdin, stdout, Error, Read, Write },
+	process::ExitCode,
+	vec::Vec
+};
+
+extern crate getopt;
+extern crate sysexits;
+extern crate strerror;
+
+use getopt::GetOpt;
+use sysexits::{ EX_IOERR, EX_OK, EX_OSERR, EX_USAGE };
+use strerror::StrError;
+
+#[cfg(target_os="openbsd")] extern crate openbsd;
+#[cfg(target_os="openbsd")] use openbsd::{ Promises, pledge };
+
+
+fn oserr(argv0: &str, e: Error) -> ExitCode {
+	eprintln!("{}: {}", argv0, e.strerror());
+	ExitCode::from(EX_OSERR as u8)
+}
+
+fn ioerr(argv0: &str, e: Error) -> ExitCode {
+	eprintln!("{}: {}", argv0, e.strerror());
+	ExitCode::from(EX_IOERR as u8)
+}
+
+fn usage(s: &str) -> ExitCode {
+	eprintln!("Usage: {} [-w word_size]", s);
+	ExitCode::from(EX_USAGE as u8)
+}
+
+fn main() -> ExitCode {
+	let argv = args().collect::<Vec<String>>();
+	
+	#[cfg(target_os="openbsd")] {
+		let promises = Promises::new("stdio");
+		if let Err(e) = pledge(Some(promises), None) {
+			return oserr(&argv[0], e);
+		}
+	}
+
+	let mut buf: Vec<u8> = Vec::new(); // holds the sequence getting swabbed
+	let mut input = stdin();
+	let mut output = stdout().lock();
+	let mut optind: usize = 1;   // argv[0]
+	let mut wordsize: usize = 2; // default; mimics dd(1p) conv=swab
+
+	while let Some(opt) = argv.getopt("w:") {
+		match opt.opt() {
+			Ok("w") => {
+					match opt.arg().unwrap().parse::<usize>() {
+						Ok(w) if w % 2 == 0 => { wordsize = w; },
+						_ => { return usage(&argv[0]); },
+					}
+				optind = opt.ind();
+			},
+			_ => { return usage(&argv[0]); }
+		}
+	}
+
+	if optind < argv.len() {
+		return usage(&argv[0]);
+	}
+
+	buf.resize(wordsize, 0);
+
+	loop {
+		match input.read(&mut buf) {
+			Ok(0) => break ExitCode::from(EX_OK as u8), // read nothing; bye
+			Ok(v) if v == wordsize => { // read full block; swab
+				let (left, right) = buf.split_at(v/2);
+
+				if let Err(e) = output.write(&right)
+						.and_then(|_| output.write(&left)) {
+					break ioerr(&argv[0], e);
+				}
+
+			},
+			Ok(v) => { // partial read; partially write
+				if let Err(e) = output.write(&buf[..v]) {
+					break ioerr(&argv[0], e);
+				}
+			},
+			Err(e) => break oserr(&argv[0], e)
+		}
+	}
+}

src/true.c

@@ -1,9 +1,18 @@
 /*
- * Copyright (c) 2023 Emma Tebibyte <emma@tebibyte.media>
+ * Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
+ * Copyright (c) 2024 DTB <trinity@trinity.moe>
  * SPDX-License-Identifier: CC0
  *
  * This work is marked with CC0 1.0. To view a copy of this license, visit
  * <http://creativecommons.org/publicdomain/zero/1.0>.
  */
 
-int main() {}
+#ifdef __OpenBSD__
+#	include <unistd.h> /* pledge(2) */
+#endif
+
+int main(void) {
+#ifdef __OpenBSD__
+	pledge(NULL, NULL);
+#endif
+}

tests/README

@@ -0,0 +1,36 @@
+The testing suite contains two trees: the Bonsai tree and the POSIX tree:
+
+.
+├── README
+├── bonsai/
+│   ├── dj.mk
+│   ├── false.mk
+│   ├── fop.mk
+│   └── ...
+├── posix/
+└── tests.mk
+
+The Bonsai tree tests the functionality of Harakit utilities for regressions and
+other issues relating to compliance to our standards of practice.
+
+The POSIX tests are currently a work-in-progress. Their status in this
+repository is uncertain.
+
+Both sets of tests also inherit the environment set by the top-level Makefile,
+which sets the BIN variable to the build/bin directory at the root of the
+project; therefore, each binary is located at $(BIN)/tool for idiomatic access.
+
+Each test contains a set of PHONY targets which are prefixed with the name of
+the tool being tested and an underscore. The first target is tests, which
+depends on all the other targets in the test file. These test files are each
+included in the top Makefile, so they can be called from the root of the
+repository. This also means that BIN can be set manually so that tests can be
+run using make(1) inside of the tests directory:
+
+	$ make -f tests.mk BIN=../build/bin dj_tests
+
+--
+Copyright © 2024 Emma Tebibyte <emma@tebibyte.media>
+
+This work is licensed under CC BY-SA 4.0. To view a copy of this license, visit
+<http://creativecommons.org/licenses/by-sa/4.0/>.

tests/bonsai/dj.mk

@@ -0,0 +1,48 @@
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PRAGMA: command_comment
+
+/dev/full:
+/dev/null:
+
+.PHONY: dj_tests
+dj_tests: dj_help dj_full dj_null # dj_skip_stdin
+
+.PHONY: dj_full
+# Linux has a /dev/full pseudodevice useful for testing errors.
+dj_full: $(BIN)/dj /dev/full
+	case "$$(uname)" in \
+	Linux) \
+		! $(BIN)/dj -Hi /dev/zero -o /dev/full 2>&1 \
+			| tee /dev/stderr \
+			| xargs -I out test '1+0 > 0+0; 1024 > 0' = out \
+		;; \
+	esac
+
+.PHONY: dj_help
+dj_help: $(BIN)/dj
+	! $(BIN)/dj -h
+
+.PHONY: dj_null
+# Read nothing from /dev/null, write nothing to /dev/null.
+dj_null: $(BIN)/dj /dev/null
+	$(BIN)/dj -Hi /dev/null -o /dev/null 2>&1 \
+		| tee /dev/stderr \
+		| xargs -I out test '0+0 > 0+0; 0 > 0' = out
+
+# This test currently fails. This is probably due to dj(1) being stale relative
+# to the main harakit branch. TODO: Reassess once the testing branch is merged.
+# .PHONY: dj_skip_stdin
+# # Test skipping stdin.
+# dj_skip_stdin: $(BIN)/dj
+# 	# Pipe 1024B of '\0' into dj(1); skip the first 24B; expect 1000B written.
+# 	dd count=1 bs=1024 </dev/zero 2>/dev/null \
+# 		| $(BIN)/dj -H -s 24 -o /dev/null 2>&1 \
+# 		| tee /dev/stderr \
+# 		| xargs -I out test '1+0 > 1+0; 1024 > 1000' = out

tests/bonsai/false.mk

@@ -0,0 +1,18 @@
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PHONY: false_tests
+false_tests: false_test false_help
+
+.PHONY: false
+false_test: $(BIN)/false
+	! $(BIN)/false
+
+.PHONY: false_help
+false_help: $(BIN)/false
+	! $(BIN)/false -h

tests/bonsai/fop.mk

@@ -0,0 +1,31 @@
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PHONY: fop_tests
+fop_tests: fop_functionality fop_delimiter fop_help fop_fail
+
+.PHONY: fop_help
+fop_help: $(BIN)/fop
+	! $(BIN)/fop -h
+
+.PHONY: fop_delimiter
+fop_delimiter: $(BIN)/fop
+	test "$$(printf 'test1 test1 test1\n' | $(BIN)/fop -d' ' 2 sed 's/1/4/g')" \
+		= 'test1 test1 test4'
+	test "$$(printf 'meowsetwoofsetribbit\n' \
+		| $(BIN)/fop -d 'set' 1 sed 's/woof/meow/g')" = 'meowsetmeowsetribbit'
+
+.PHONY: fop_fail
+fop_fail: $(BIN)/fop
+	! printf 'test\n' | $(BIN)/fop 1 cat
+	! printf 'test\n' | $(BIN)/fop 'test' cat
+	! printf 'test\n' | $(BIN)/fop -d'test' cat
+
+.PHONY: fop_functionality
+fop_functionality: $(BIN)/fop
+	test "$$(printf 'test1\036test1\036test1\n' | $(BIN)/fop 1 sed 's/1/4/g')" \
+		= "$$(printf 'test1\036test4\036test1\n')"

tests/bonsai/hru.mk

@@ -0,0 +1,32 @@
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PHONY: hru_tests
+hru_tests: hru_help hru_functionality hru_negative hru_regressions
+
+.PHONY: hru_help
+hru_help: $(BIN)/hru
+	! $(BIN)/hru -h
+
+.PHONY: hru_functionality
+hru_functionality: $(BIN)/hru
+	test "$$(printf '1234\n' | $(BIN)/hru)" = '1.2 kB'
+	test "$$(printf '0\n' | $(BIN)/hru)" = '0 B'
+
+.PHONY: hru_negative
+hru_negative: $(BIN)/hru
+	! printf '%s\n' '-1' | $(BIN)/hru
+
+.PHONY: hru_regressions
+hru_regressions: $(BIN)/hru
+	n=1; \
+	while true; \
+	do \
+		printf '%s\n' "$$n" | $(BIN)/hru || break; \
+		n="$$(($$n * 10))"; \
+	done; \
+	printf 'Max float: %s\n' "$$n"

tests/bonsai/intcmp.mk

@@ -0,0 +1,67 @@
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PHONY: intcmp_tests
+intcmp_tests: intcmp_help intcmp_none intcmp_e intcmp_g intcmp_l intcmp_combined
+
+.PHONY: intcmp_help
+intcmp_help: $(BIN)/intcmp
+	! $(BIN)/intcmp -h
+
+# These test that integer comparisons are working as they should. For the sake
+# of readability (to facilitate faster skimming) these recipes follow a
+# columned format:
+#	$binary       -flags d d d d  # op
+# For flag meanings reference intcmp(1) (though they are somewhat self
+# explanatory). d here refers to a decimal number; a mixture of 1s, 2s, and 3s
+# (a particularly lovely number) arranged to demonstrate easily the operation
+# under scrutiny. The commented op is the operation that is true for the given
+# numbers. For example:
+#	$(BIN)/intcmp   -e   3 3 3 3  # ==
+# op here is ==; 3 == 3 == 3 == 3. The flag being used is -e, to test for
+# equality, so this test should succeed.
+#	! $(BIN)/intcmp -l   3 2 1    # >
+# op here is >; 3 > 2 > 1. The flag being used is -l, to test for each integer
+# being less than the next, so intcmp should fail - hence the ! at the start of
+# the invocation. If this test failed, intcmp(1) would be confusing -l for -g,
+# so that would be a good place to start looking for bugs.
+
+.PHONY: intcmp_none
+intcmp_none: $(BIN)/intcmp
+	! $(BIN)/intcmp 1 2
+
+.PHONY: intcmp_e
+intcmp_e: $(BIN)/intcmp
+	$(BIN)/intcmp   -e   3 3 3    # ==
+	! $(BIN)/intcmp -e   1 2 3    # <
+	! $(BIN)/intcmp -e   3 2 1    # >
+
+.PHONY: intcmp_g
+intcmp_g: $(BIN)/intcmp
+	$(BIN)/intcmp   -g   3 2 1    # >
+	! $(BIN)/intcmp -g   3 3 3    # ==
+	! $(BIN)/intcmp -g   1 2 3    # <
+	$(BIN)/intcmp   -ge  3 3 1    # >=
+	! $(BIN)/intcmp -ge  1 2 3    # <
+
+.PHONY: intcmp_l
+intcmp_l: $(BIN)/intcmp
+	$(BIN)/intcmp   -l   1 2 3    # <
+	! $(BIN)/intcmp -l   3 3 3    # ==
+	! $(BIN)/intcmp -l   3 2 1    # >
+	$(BIN)/intcmp   -le  1 3 3    # <=
+	! $(BIN)/intcmp -le  3 2 1    # >
+
+.PHONY: intcmp_combined
+intcmp_combined: $(BIN)/intcmp
+	$(BIN)/intcmp   -gl  1 2 3    # <
+	$(BIN)/intcmp   -gl  3 2 1    # >
+	$(BIN)/intcmp   -gl  1 3 1    # !=
+	! $(BIN)/intcmp -gl  3 3 3    # ==
+	$(BIN)/intcmp   -egl 3 1 1 3  # >, ==, <
+	! $(BIN)/intcmp -egl foo      # huh?

tests/bonsai/mm.mk

@@ -0,0 +1,34 @@
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PHONY: mm_tests
+mm_tests: mm_args mm_help mm_stderr mm_remaining
+
+.PHONY: mm_none
+mm_none: $(BIN)/mm
+	test "$$(printf 'meow\n' | $(BIN)/mm)" = meow
+
+.PHONY: mm_args
+# mm(1) will error if positional arguments are given without -i or -o
+mm_args: $(BIN)/mm
+	! $(BIN)/mm argument
+
+.PHONY: mm_help
+mm_help: $(BIN)/mm
+	! $(BIN)/mm -h
+
+.PHONY: mm_stderr
+# check if stderr is empty upon specifying -e
+mm_stderr: $(BIN)/mm
+	test "$$(printf 'test\n' | $(BIN)/mm -e 2>&1 >/dev/null )" = "test"
+
+.PHONY: mm_remaining
+# check to make sure remaining arguments are used
+mm_remaining: $(BIN)/mm
+	test "$$($(BIN)/mm -i README COPYING)" = "$$(cat README COPYING)"
+	$(BIN)/mm -i README -o /tmp/mm_test0 /tmp/mm_test1
+	diff /tmp/mm_test0 /tmp/mm_test1

tests/bonsai/npc.mk

@@ -0,0 +1,90 @@
+#!/bin/sh
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PRAGMA: command_comment
+
+.PHONY: npc_tests
+npc_tests: npc_help npc_args npc_ascii
+
+.PHONY: npc_help
+npc_help: $(BIN)/npc
+	! $(BIN)/npc -h
+
+.PHONY: npc_args
+# arg parsing
+npc_args:
+	$(BIN)/npc -e </dev/null
+	$(BIN)/npc -t </dev/null
+	$(BIN)/npc -et </dev/null
+	! $(BIN)/npc -et 5 </dev/null
+
+.PHONY: npc_ascii
+# Test 0x00 to 0x7f in input; in other words, the full 7b ASCII range.
+npc_ascii: npc_ascii_controls npc_ascii_symbols npc_ascii_uppers # \
+#	npc_ascii_lowers
+
+.PHONY: npc_ascii_controls
+# (control characters)
+npc_ascii_controls:
+	# The following test prints the bytes 0x00 (inclusive) through 0x20
+	# (exclusive) and pipes them through npc(1). npc(1) should then replace all
+	# non-printing, non-space (in the isspace(3p) sense) characters with their
+	# graphical carat-char counterparts (see the npc(1) man page). The head(1p)
+	# invocation then strips off everything past the first line (or past the
+	# first newline byte, 0x0A) and xargs(1p) is used to test(1p) the output
+	# against the known good answer.
+
+	# Immediately before that newline, 0x09 is printed - in ASCII, the
+	# horizontal tab. If xargs' -I option is used, tr(1p) should used to delete
+	# that tab. If the tab is left as part of input, OpenBSD's xargs(1)
+	# implementation has been observed to strip it along with the other
+	# trailing whitespace (the newline), but Busybox's and GNU's xargs(1)
+	# implementations have been observed to leave the tab in. All three
+	# implementations strip off the trailing tab if `-I` is not used. The POSIX
+	# specification for `-I` is ambiguous as to which behavior is correct.
+	# This comment is the result of much bewilderment and debugging.
+
+	# ASCII 0x00 to 0x0a (before the newline, due to xargs(1p) issues)
+	awk 'BEGIN{ for (i = 0; i < 32; ++i) printf("%c", i); }' \
+		| $(BIN)/npc \
+		| head -n 1 \
+		| xargs test "^@^A^B^C^D^E^F^G^H" =
+
+	# ASCII 0x0a (otherwise the head|tail sequence won't work) to 0x1f
+	awk 'BEGIN{ for (i = 0; i < 32; ++i) printf("%c", i); print }' \
+		| $(BIN)/npc \
+		| head -n 2 \
+		| tail -n 1 \
+		| xargs -I out test "^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_"
+
+.PHONY: npc_ascii_symbols
+# ASCII 0x1f to 0x3f (^_ and symbols)
+npc_ascii_symbols:
+	# shell quoting olympics
+	awk 'BEGIN{ for (i = 31; i < 64; ++i) printf("%c", i); print }' \
+		| $(BIN)/npc \
+		| sed -e s"/\'/\\\'/g" -e 's/"/\\"/g' \
+		| xargs -I out test "^_ !\"#$$%&'()*+,-./0123456789:;<=>?" = out
+
+.PHONY: npc_ascii_uppers
+# ASCII 0x40 to 0x5f (uppercases)
+npc_ascii_uppers:
+	awk 'BEGIN{ for (i = 64; i < 96; ++i) printf("%c", i); print }' \
+		| $(BIN)/npc \
+		| sed 's/\\/\\\\/' \
+		| xargs -I out test @ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_ = out
+
+# This test is broken and will need closer inspection along with the npc(1)
+# source.
+# .PHONY: npc_ascii_lowers
+# # ASCII 0x60 to 0x7f (lowercases)
+# npc_ascii_lowers:
+# 	awk 'BEGIN{ for (i = 96; i < 128; ++i) printf("%c", i); print }' \
+# 		| $(BIN)/npc \
+# 		| xargs -I out test "\`abcdefghijklmnopqrstuvwxyz{|}~^?" = out

tests/bonsai/peek.mk

@@ -0,0 +1,24 @@
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+# Testing peek is hard as it requires visual confirmation that text isn't being
+# echoed. These tests don't go that far but are a start, and have already
+# caught a bug in -i behavior.
+
+.PHONY: peek_tests
+peek_tests: peek_help peek_stdio
+
+.PHONY: peek_help
+peek_help: $(BIN)/peek
+	! $(BIN)/peek -h
+
+.PHONY: peek_stdio
+# Test peek -i
+peek_stdio: $(BIN)/peek
+	printf 'Test.\n' \
+		| $(BIN)/peek -i \
+		| xargs test 'Test.' =

tests/bonsai/rpn.mk

@@ -0,0 +1,43 @@
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PHONY: rpn_tests
+rpn_tests: rpn_help rpn_add rpn_sub rpn_mul rpn_div rpn_mod rpn_flr
+
+.PHONY: rpn_help
+rpn_help: $(BIN)/rpn
+	! $(BIN)/rpn -h
+
+.PHONY: rpn_add
+rpn_add: $(BIN)/rpn
+	test "$$($(BIN)/rpn 1 2 +)" -eq 3
+	test "$$($(BIN)/rpn 0.2 0.1 +)" = 0.3
+
+.PHONY: rpn_sub
+rpn_sub: $(BIN)/rpn
+	test "$$($(BIN)/rpn 23 5 -)" -eq 18
+	test "$$($(BIN)/rpn 0.3 0.1 -)" = 0.2
+
+.PHONY: rpn_mul
+rpn_mul: $(BIN)/rpn
+	test "$$($(BIN)/rpn 1.2 3 '*')" = 3.6
+	test "$$($(BIN)/rpn 0 3 '*')" -eq 0
+
+.PHONY: rpn_div
+rpn_div: $(BIN)/rpn
+	test "$$($(BIN)/rpn 12 5 /)" = 2.4
+	test "$$($(BIN)/rpn 3 0 /)" = inf
+
+.PHONY: rpn_mod
+rpn_mod: $(BIN)/rpn
+	test "$$($(BIN)/rpn 12 5 %)" -eq 2
+	test "$$($(BIN)/rpn 9 4 %)" -eq 1
+
+.PHONY: rpn_flr
+rpn_flr: $(BIN)/rpn
+	test "$$($(BIN)/rpn 12 5 //)" -eq 2
+	test "$$($(BIN)/rpn 9 4 //)" -eq 2

tests/bonsai/scrut.mk

@@ -0,0 +1,46 @@
+#!/bin/sh
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PRAGMA: command_comment
+
+.PHONY: scrut_tests
+scrut_tests: scrut_help scrut_options
+
+.PHONY: scrut_help
+scrut_help: $(BIN)/scrut
+	! $(BIN)/scrut -h
+
+.PHONY: scrut_options
+# scrut tests file attributes, but files of a certain attribute aren't
+# guaranteed to be present on a system. This test checks all of the files in
+# harakit and, if test(1p) says a file matches a certain attribute, then checks
+# scrut.
+# opts are space-delimited (for command splitting), sel is not
+scrut_options: $(BIN)/scrut
+	set -e; \
+	opts="b c d e f g k p r s u w x L S"; \
+	sel=; \
+	find . -name .git -prune -o -print \
+		| while read -r f; do \
+			for opt in $$opts; \
+				do if ! printf "%s\n" $$sel | grep $$opt >/dev/null; then \
+					if test -$$opt "$$f"; then \
+						if ! $(BIN)/scrut -$$opt "$$f"; \
+							then printf "[!!] scrut -%s failed on %s.\n" \
+								$$opt "$$f"; \
+						fi; \
+						sel="$$sel$$opt"; \
+						printf "[OK] Tested scrut -%s using %s\n" \
+							$$opt "$$f"; \
+					fi; \
+				fi; \
+			done; \
+			if printf "%s\n" "$$opts" | sed 's/ //g' | xargs test "$$sel" =; \
+				then break; \
+			fi; \
+		done

tests/bonsai/str.mk

@@ -0,0 +1,20 @@
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PRAGMA: command_comment
+
+.PHONY: str_tests
+str_tests: str_help str_isalpha
+
+.PHONY: str_help
+str_help: $(BIN)/str
+	! $(BIN)/str -h
+
+.PHONY: str_isalpha
+str_isalpha: $(BIN)/str
+	$(BIN)/str   isalpha c
+	! $(BIN)/str isalpha 3

tests/bonsai/strcmp.mk

@@ -0,0 +1,31 @@
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+NAME = strcmp
+TARGET = $(NAME)_tests
+BINARY = $(BIN)/$(NAME)
+
+.PHONY: strcmp_tests
+strcmp_tests: strcmp_equals strcmp_help strcmp_nocmp strcmp_unequals
+
+.PHONY: strcmp_equals
+strcmp_equals: $(BIN)/strcmp
+	$(BIN)/strcmp equals equals
+	$(BIN)/strcmp - -
+
+.PHONY: strcmp_help
+strcmp_help: $(BIN)/strcmp
+	! $(BIN)/strcmp -h
+
+.PHONY: strcmp_nocmp
+strcmp_nocmp: $(BIN)/strcmp
+	! $(BIN)/strcmp nocmp
+
+.PHONY: strcmp_unequals
+strcmp_unequals: $(BIN)/strcmp
+	! $(BIN)/strcmp unequals equals

tests/bonsai/swab.mk

@@ -0,0 +1,22 @@
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PRAGMA: command_comment
+
+.PHONY: swab_tests
+swab_tests: swab_help swab_examples
+
+.PHONY: swab_help
+swab_help: $(BIN)/swab
+	! $(BIN)/swab -h
+
+.PHONY: swab_examples
+# These are the examples present in the man page.
+swab_examples: $(BIN)/swab
+	printf 'hello world!\n' \
+		| $(BIN)/swab \
+		| xargs -I out test 'ehll oowlr!d' = out

tests/bonsai/true.mk

@@ -0,0 +1,19 @@
+#!/bin/sh
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+.PHONY: true_tests
+true_tests: true_test
+
+.PHONY: true_help
+true_help: $(BIN)/true
+	$(BIN)/true -h
+
+.PHONY: true_test
+true_test: $(BIN)/true
+	$(BIN)/true

tests/posix-compat.sh

@@ -1,24 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) 2023–2024 Emma Tebibyte <emma@tebibyte.media>
-# SPDX-License-Identifier: FSFAP
-#
-# Copying and distribution of this file, with or without modification, are
-# permitted in any medium without royalty provided the copyright notice and this
-# notice are preserved.  This file is offered as-is, without any warranty.
-
-set -e
-
-if ! ls Makefile >/dev/null 2>&1
-then
-	printf '%s: Run this script in the root of the project.\n' "$0" 1>&2 
-	exit 1
-fi
-
-printf "Starting POSIX compatibility testing.\n"
-
-for utility in tests/posix/*; do
-	printf '%s: %s: Testing utility.\n' "$0" "$utility"
-	"$utility"
-	printf '\n'
-done

tests/posix/bin/cat

@@ -0,0 +1,22 @@
+#!/bin/sh
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+# Strictly POSIX-compliant cat(1) implementation. See cat(1p)
+
+for arg in "$@"; do
+	case "$arg" in
+		-u) args="$(printf '%s	%s\n' "$args" "$arg")" ;;
+		*) args="$(printf -- '%s	-i	%s\n' "$args" "$arg")" ;;
+	esac
+done
+
+# See IEEE Std 1003.1-2017 3.282
+# https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_282
+IFS='	'
+
+mm $args

tests/posix/bin/false

@@ -0,0 +1,12 @@
+#!/bin/sh
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+# Strictly POSIX-compliant false(1) implementation. See false(1p)
+
+false "$@"

tests/posix/bin/true

@@ -0,0 +1,11 @@
+#!/bin/sh
+# Copyright (c) 2024 DTB <trinity@trinity.moe>
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+# Strictly POSIX-compliant true(1) implementation. See true(1p)
+true "$@"

tests/posix/posix_env

@@ -0,0 +1,5 @@
+#!/bin/sh
+
+set -ex
+
+PATH="$PWD/bin:$PATH"

tests/tests.mk

@@ -0,0 +1,15 @@
+# Copyright (c) 2024 Emma Tebibyte <emma@tebibyte.media>
+# SPDX-License-Identifier: FSFAP
+#
+# Copying and distribution of this file, with or without modification, are
+# permitted in any medium without royalty provided the copyright notice and this 
+# notice are preserved.  This file is offered as-is, without any warranty.
+
+
+#TESTFILES != for file in tests/bonsai/*.mk tests/posix/*.mk; do printf '%s ' "$$file"; done;
+TESTFILES != for file in tests/bonsai/*.mk; do printf '%s ' "$$file"; done;
+
+TESTS != printf '%s\n' "$(TESTFILES)" | xargs -n1 basename \
+	| sed 's/\.mk/_tests/g'
+
+include $(TESTFILES)